The flow fields inside conventional and rotary hydrocyclones were simulated respectively. In these simulations, water only and oil-water mixture, with distinctly different viscosities, were used as continuous phases. ...The flow fields inside conventional and rotary hydrocyclones were simulated respectively. In these simulations, water only and oil-water mixture, with distinctly different viscosities, were used as continuous phases. Simulation results agreed well with the experimental measurements. Simulation results showed that the conventional hydrocyclone could effectively separate sand from water, but could not separate sand from high viscosity water/oil emulsion. This showed that the viscosity of continuous phases influenced greatly both the separation efficiency and the flow field distribution in the conventional hydrocyclone. For high viscosity oil/water sand dispersion (mixture), the rotary hydrocyclone has better separation performance than the conventional one, with a more favorable flow field distribution.展开更多
This work investigated the aging effects on the rheological properties of high viscosity modified asphalt(HVMA).First,the high-and low-temperature rheological properties were measured by a dynamic shear rheometer and ...This work investigated the aging effects on the rheological properties of high viscosity modified asphalt(HVMA).First,the high-and low-temperature rheological properties were measured by a dynamic shear rheometer and a bending beam rheometer,respectively.The aging mechanism was then tested using an Fourier transform infrared spectroscopy and a scanning electron microscope.Besides,a study was performed to compare the aging effects on the rheological properties of HVMA,crumb rubber modified asphalt(CRMA),and neat asphalt(SK-90).The experimental results showed that the effects of the long-term aging on HVMA exceeded those of short-term aging.The complex shear modulus of the HVMA was improved by the aging in the whole frequency range.The complex shear modulus of the HVMA after the long-term aging was larger than after the short-term aging.Thus,the aging improved the high-temperature viscoelastic performance of HVMA.With a decrease in temperature from-12℃to-24℃,the low-temperature viscoelastic performance of HVMA decreased since its stiffness modulus and low continuous grading temperature increase.Both of the short-and long-term aging of HVMA were caused by an oxidation reaction,while modifier swelling also happened after long-term aging.Compared to CRMA and SK-90,aging had a limited influence on the high-and low-temperature rheological properties of HVMA.展开更多
High viscosity asphalt(HVA)has been a great success as a drainage pavement material.However,the larger porosity of drainage asphalt mixtures weakens the cohesion and adhesion and leads to premature rutting,water damag...High viscosity asphalt(HVA)has been a great success as a drainage pavement material.However,the larger porosity of drainage asphalt mixtures weakens the cohesion and adhesion and leads to premature rutting,water damage,spalling and cracking.The purpose of this study was to investigate the rheological properties of HVA prepared using different high viscosity modifiers through conventional tests,Brookfield viscosity tests,dynamic shear rheometer tests and bending beam rheometer tests.The conventional performance results demonstrated SBS+rubber asphalt(SRA1/2)exhibited excellent elastic recovery and low-temperature flexibility.The 60℃ dynamic viscosity results indicated TPS+rubber asphalt(TRA)had the excellent adhesion.The rotational viscosity results and rheological results indicated that SRA-2 not only exhibited excellent temperature stability and workability,as well as excellent resistance to deformation and rutting resistance,but also exhibited excellent low-temperature cracking resistance and relaxation performance.Based on rheological results,the PG classification of HVA was 16%rubber+asphalt for PG76-22,20%rubber+asphalt for PG88-22,TRA and SRA-1/2 for PG88-28.From comprehensive evaluation of the viscosity,temperature stability and sensitivity,as well as high/low temperature performance of HVA,SRA-2 was found to be more suited to the requirements of drainage asphalt pavement materials.展开更多
In the simulation of the metal injection moulding (MIM), the behaviours of feedstock are much di?erent from which of the polymer injection. It is a mixture of the metallic powder in high concentration and so...In the simulation of the metal injection moulding (MIM), the behaviours of feedstock are much di?erent from which of the polymer injection. It is a mixture of the metallic powder in high concentration and some plastic binder. The advance in simulation of the mould ?lling with such high viscous feedstock is featured by the development of a fully explicit vectorial algorithm. On the basis of previous explicit software realized by the authors, the new algorithm avoids the global solution for pressure ?elds and the use of MINI elements to improve its e?ciency. Except for the operations at element level, neither global solution nor the construction of global matrix is required in simulation. A special strategy is used to regulate the incompressibility condition in ?lled domain at each time step. In case of the MIM problems, this method provides a fast way to simulate the ?lling processes. The computational cost is about linearly proportional to the degree of freedom number. Moreover, this vectorial algorithm can be easily parallelized for high performance computation with multi-clusters. The comparison of numerical results with previous simulations on 3D cases proves the validity and e?ciency of new algorithm.展开更多
In this work, aqueous glycerol solutions are atomized to investigate the influence of the viscosity on the droplet size and the general atomization behavior in a setup using standing surface acoustic waves (sSAW) and ...In this work, aqueous glycerol solutions are atomized to investigate the influence of the viscosity on the droplet size and the general atomization behavior in a setup using standing surface acoustic waves (sSAW) and a fluid supply at the boundary of the acoustic path. Depending on the fluid viscosity, the produced aerosols have a monomodal or polymodal size distribution. The mean droplet size in the dominant droplet fraction, however, decreases with increasing viscosity. Our results also indicate that the local wavefield conditions are crucial for the atomization process.展开更多
Changes in cellular viscosity are associated with various physiological processes and pathological conditions.To study these cellular processes and functions,highly sensitive fluorescent probes that detect subtle chan...Changes in cellular viscosity are associated with various physiological processes and pathological conditions.To study these cellular processes and functions,highly sensitive fluorescent probes that detect subtle changes in viscosity are urgently needed but remain lacking.In this study,we present a series of viscosity-responsive near-infrared(NIR)fluorescent probes based on styrene-coated boron dipyrromethene(BODIPY).The probe modified with dimethylaminostyrene and piperazine at the two terminals of the BODIPY scaffold showed extremely high viscosity sensitivity values(x,around 1.54),with excellent performance for detecting viscosity below 20 c P.This outstanding property is attributed to the synergistic effects of multiple rotatable bonds and hydrogen-bond interactions.Additionally,this probe has been successfully deployed to monitor viscosity changes in various cellular compartments(i.e.,cytoplasm)and processes(such as during autophagy).This work provides a rational molecular design strategy to construct fluorescent probes with high viscosity sensitivity for exploring cell functions.展开更多
Objective To compare the outcomes of in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) between semen liquefaction and viscosity with normal and abnormal. Methods Semen that liquefied within ...Objective To compare the outcomes of in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) between semen liquefaction and viscosity with normal and abnormal. Methods Semen that liquefied within 60 min and normal viscosity was assigned to the normal group, while semen that unliquefied more than 60 min or high viscosity was assigned to abnormal group. Equal volumes of culture medium were added to abnormal group and normal control group, followed by repeated pipetting, to induce liquefaction. Sperm parameters, fertilization and cleavage rates, good-quality embryo rate, im- plantation rate and pregnancy rate were analyzed. Results The abnormal group ratio was much higher in the ICSI group (30.5%) than in the IVF group (21.9%) (P〈0.05). The age of the husbands and total progressive motility (PR) sperm in abnormal IVF group were higher than those in normal IVF group (P〈0.05). Fertilization rate (80.7%) in the abnormal IVF group was higher than that in the normal IVF group (75.6%) and normal control group (P〈0.05). There were no differences in outcomes of the ICSI patients between the normal and abnormal groups. There was no difference between normal group and normal control group. Conclusion Equal volume of culture media was added to non-liquefied semen may be used to high viscosity and unliquefied semen, and may have a positive effect on fertilization outcomes.展开更多
During the smelting process of the high Al steels,the reaction between SiOin molten slag and dissolved aluminum in liquid steel always takes place.This aluminathermic reduction reaction will lead to the substitution o...During the smelting process of the high Al steels,the reaction between SiOin molten slag and dissolved aluminum in liquid steel always takes place.This aluminathermic reduction reaction will lead to the substitution of 1mol SiOfor 2/3mol AlO.Therefore,the investigations about the influence of the ratio of AlOto SiOon viscosity and structure changes of mould flux during this process are very necessary.The viscosity variation of CaO-SiO-AlO-CaFv2 melts was studied by changing compositions considering the aluminathermic reduction reaction.It was found that viscosity increased monotonously with gradually increasing the substitution extent.According to the Raman analysis,the substitution of AlOfor SiOleads to the decrease of non-bridging oxygen but the increase of bridging oxygen.Therefore,degree of polymerization and viscosity increase as the substitution extent increases.By comparing the measured viscosities with the model calculated values,it was found that both the recently developed Zhang′s model and Roboud model could describe the viscosity variation behavior of CaO-SiO-AlO-CaFmelts very well.展开更多
文摘The flow fields inside conventional and rotary hydrocyclones were simulated respectively. In these simulations, water only and oil-water mixture, with distinctly different viscosities, were used as continuous phases. Simulation results agreed well with the experimental measurements. Simulation results showed that the conventional hydrocyclone could effectively separate sand from water, but could not separate sand from high viscosity water/oil emulsion. This showed that the viscosity of continuous phases influenced greatly both the separation efficiency and the flow field distribution in the conventional hydrocyclone. For high viscosity oil/water sand dispersion (mixture), the rotary hydrocyclone has better separation performance than the conventional one, with a more favorable flow field distribution.
基金supported by the National Key R&D Program of China(Grant No.2018YFB1600200)the Fok YingTong Education Foundation(Grant No.161072)+1 种基金the Youth Top-notch Talent Support Program of Shaanxi Provincethe Fundamental Research Funds for the Central Universities(Grant No.300102219317)。
文摘This work investigated the aging effects on the rheological properties of high viscosity modified asphalt(HVMA).First,the high-and low-temperature rheological properties were measured by a dynamic shear rheometer and a bending beam rheometer,respectively.The aging mechanism was then tested using an Fourier transform infrared spectroscopy and a scanning electron microscope.Besides,a study was performed to compare the aging effects on the rheological properties of HVMA,crumb rubber modified asphalt(CRMA),and neat asphalt(SK-90).The experimental results showed that the effects of the long-term aging on HVMA exceeded those of short-term aging.The complex shear modulus of the HVMA was improved by the aging in the whole frequency range.The complex shear modulus of the HVMA after the long-term aging was larger than after the short-term aging.Thus,the aging improved the high-temperature viscoelastic performance of HVMA.With a decrease in temperature from-12℃to-24℃,the low-temperature viscoelastic performance of HVMA decreased since its stiffness modulus and low continuous grading temperature increase.Both of the short-and long-term aging of HVMA were caused by an oxidation reaction,while modifier swelling also happened after long-term aging.Compared to CRMA and SK-90,aging had a limited influence on the high-and low-temperature rheological properties of HVMA.
基金The work described in this paper is supported by the National Natural Science Foundation of China under Grant No.51778136Technology Research and Development Project of China Railway under No.J2019G003.
文摘High viscosity asphalt(HVA)has been a great success as a drainage pavement material.However,the larger porosity of drainage asphalt mixtures weakens the cohesion and adhesion and leads to premature rutting,water damage,spalling and cracking.The purpose of this study was to investigate the rheological properties of HVA prepared using different high viscosity modifiers through conventional tests,Brookfield viscosity tests,dynamic shear rheometer tests and bending beam rheometer tests.The conventional performance results demonstrated SBS+rubber asphalt(SRA1/2)exhibited excellent elastic recovery and low-temperature flexibility.The 60℃ dynamic viscosity results indicated TPS+rubber asphalt(TRA)had the excellent adhesion.The rotational viscosity results and rheological results indicated that SRA-2 not only exhibited excellent temperature stability and workability,as well as excellent resistance to deformation and rutting resistance,but also exhibited excellent low-temperature cracking resistance and relaxation performance.Based on rheological results,the PG classification of HVA was 16%rubber+asphalt for PG76-22,20%rubber+asphalt for PG88-22,TRA and SRA-1/2 for PG88-28.From comprehensive evaluation of the viscosity,temperature stability and sensitivity,as well as high/low temperature performance of HVA,SRA-2 was found to be more suited to the requirements of drainage asphalt pavement materials.
基金Project supported by the Research Fund for the Doctoral Program of Higher Education of China (No. 20020613005)and the French Programme of Alternant Doctoral Training.
文摘In the simulation of the metal injection moulding (MIM), the behaviours of feedstock are much di?erent from which of the polymer injection. It is a mixture of the metallic powder in high concentration and some plastic binder. The advance in simulation of the mould ?lling with such high viscous feedstock is featured by the development of a fully explicit vectorial algorithm. On the basis of previous explicit software realized by the authors, the new algorithm avoids the global solution for pressure ?elds and the use of MINI elements to improve its e?ciency. Except for the operations at element level, neither global solution nor the construction of global matrix is required in simulation. A special strategy is used to regulate the incompressibility condition in ?lled domain at each time step. In case of the MIM problems, this method provides a fast way to simulate the ?lling processes. The computational cost is about linearly proportional to the degree of freedom number. Moreover, this vectorial algorithm can be easily parallelized for high performance computation with multi-clusters. The comparison of numerical results with previous simulations on 3D cases proves the validity and e?ciency of new algorithm.
文摘In this work, aqueous glycerol solutions are atomized to investigate the influence of the viscosity on the droplet size and the general atomization behavior in a setup using standing surface acoustic waves (sSAW) and a fluid supply at the boundary of the acoustic path. Depending on the fluid viscosity, the produced aerosols have a monomodal or polymodal size distribution. The mean droplet size in the dominant droplet fraction, however, decreases with increasing viscosity. Our results also indicate that the local wavefield conditions are crucial for the atomization process.
基金supported by the National Key R&D Program of China(2022YFA1207400)the National Natural Science Foundation of China(22274061)+1 种基金the 111 Project(B17019)the Fundamental Research Funds for the Central Universities(CCNU22QN007)。
文摘Changes in cellular viscosity are associated with various physiological processes and pathological conditions.To study these cellular processes and functions,highly sensitive fluorescent probes that detect subtle changes in viscosity are urgently needed but remain lacking.In this study,we present a series of viscosity-responsive near-infrared(NIR)fluorescent probes based on styrene-coated boron dipyrromethene(BODIPY).The probe modified with dimethylaminostyrene and piperazine at the two terminals of the BODIPY scaffold showed extremely high viscosity sensitivity values(x,around 1.54),with excellent performance for detecting viscosity below 20 c P.This outstanding property is attributed to the synergistic effects of multiple rotatable bonds and hydrogen-bond interactions.Additionally,this probe has been successfully deployed to monitor viscosity changes in various cellular compartments(i.e.,cytoplasm)and processes(such as during autophagy).This work provides a rational molecular design strategy to construct fluorescent probes with high viscosity sensitivity for exploring cell functions.
文摘Objective To compare the outcomes of in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) between semen liquefaction and viscosity with normal and abnormal. Methods Semen that liquefied within 60 min and normal viscosity was assigned to the normal group, while semen that unliquefied more than 60 min or high viscosity was assigned to abnormal group. Equal volumes of culture medium were added to abnormal group and normal control group, followed by repeated pipetting, to induce liquefaction. Sperm parameters, fertilization and cleavage rates, good-quality embryo rate, im- plantation rate and pregnancy rate were analyzed. Results The abnormal group ratio was much higher in the ICSI group (30.5%) than in the IVF group (21.9%) (P〈0.05). The age of the husbands and total progressive motility (PR) sperm in abnormal IVF group were higher than those in normal IVF group (P〈0.05). Fertilization rate (80.7%) in the abnormal IVF group was higher than that in the normal IVF group (75.6%) and normal control group (P〈0.05). There were no differences in outcomes of the ICSI patients between the normal and abnormal groups. There was no difference between normal group and normal control group. Conclusion Equal volume of culture media was added to non-liquefied semen may be used to high viscosity and unliquefied semen, and may have a positive effect on fertilization outcomes.
基金Item Sponsored by National Natural Science Foundation of China(51304018,51174022,51474141)
文摘During the smelting process of the high Al steels,the reaction between SiOin molten slag and dissolved aluminum in liquid steel always takes place.This aluminathermic reduction reaction will lead to the substitution of 1mol SiOfor 2/3mol AlO.Therefore,the investigations about the influence of the ratio of AlOto SiOon viscosity and structure changes of mould flux during this process are very necessary.The viscosity variation of CaO-SiO-AlO-CaFv2 melts was studied by changing compositions considering the aluminathermic reduction reaction.It was found that viscosity increased monotonously with gradually increasing the substitution extent.According to the Raman analysis,the substitution of AlOfor SiOleads to the decrease of non-bridging oxygen but the increase of bridging oxygen.Therefore,degree of polymerization and viscosity increase as the substitution extent increases.By comparing the measured viscosities with the model calculated values,it was found that both the recently developed Zhang′s model and Roboud model could describe the viscosity variation behavior of CaO-SiO-AlO-CaFmelts very well.