The Upper Jurassic sediments,Marib-Shabwa Basin,Yemen:Lithofacies aspects and sequence stratigraphic analysis

The present study is devoted to understanding the evolution of the Upper Jurassic Sab'atayn Formation in the Marib-Shabwa Basin,Yemen,through a sequence stratigraphic analysis based on integrating datasets of sedimentology,seismic sections,and well logs.The Sab'atayn Formation(Tithonian age)is represented by a series of clastic and evaporites that were deposited under fluvio-deltaic to prodeltaic settings.It is divided into four members including Yah(at the base),upwards to Seen,Alif,and Safir at the top.Two third-order depositional sequences were determined for the Tithonian succession which were separated by three sequence boundaries.These sequences were classified into their systems tracts signifying several sedimentation patterns of progradational,aggradational,and retrogradational parasequence sets.The first depositional sequence corresponds to the early-middle Tithonian Yah and Seen units that can be classified into lowstand,transgressive,and highstand systems tracts.The second sequence comprises the late Tithonian Alif unit that can be subdivided into transgressive and highstand systems tracts.The sandy deposits of the Alif Member(highstand deposits)represent the most productive hydrocarbon reservoir in the basin.The Upper Jurassic sediments in the study area were resulted from a combination of eustatic and tectonic effects.

3D static modeling and sequence stratigraphy using well logs and seismic data:An example of Abu Roash G member in Bahga oilfield

This research uses both three-dimensional(3D)modeling and geologic well control to piece back together the architectural parts of the Late Cretaceous formations.The goal is to figure out the sizes,directions,locations,and controls of the layers of the fluvial sandstone reservoirs.Sequence stratigraphy is essential for 3D reservoir modeling and petroleum geology understanding in the Bahga oilfield.The purpose of this work is to create a static model that shows the layers and facies distribution in the reservoir interval.We will use data from nine well logs and 22 seismic lines calibrated by the Abu Roash G Member reservoir core intervals to accomplish this.The petrophysical study discovered three parts in the Abu Roash G Member reservoir rock:channel fill that is affected by tides,channel fill that is dominated by tides(intertidal sands),and channel top with lenticular bedded sandstone.The model's findings point to the existence of an NNW-oriented sand body,which could be a prime location to produce hydrocarbons.The original oil in place(OOIP)is about 3,438,279 Stock Tank Barrels(STB),and the oil reserve reaches up to 1,031,484(STB).Sequence stratigraphic analysis using seismic and well log information(SB)reveals that the Upper Cretaceous AR/G reservoir of the Bahga field is characterized by third-and fourth-order stratigraphic sequences,which are constrained by three Maximum Flooding Surfaces(MFS)and two Sequence Boundaries.The integration of the derived geological model and sequence stratigraphic results can lower future extraction risk by identifying the locations and trends of the geologic facies with the necessary petrophysical properties for the hydrocarbon accumulations.

Highlighting relationships between sand thicknesses,reservoir-seal pairs and paleobathymetry from a sequence stratigraphic perspective:An example from Tortonian Serravallian deposits,onshore Niger Delta Basin

The utilization of sequence stratigraphic concepts in identifying sands and their spatial continuity in distinct gross depositional settings is key,especially in frontier settings where data paucity is a common challenge.In the Baka field,onshore Niger Delta,detailed reservoir correlation guided by sequence stratigraphic framework analysis showed the distribution of sand and shale units constituting reservoirseal pairs(RSP)correlatable across the field.Within the 3rd-order packages,it is observed that the lowstand systems tract(LST)and highstand systems tract(HST)contain more RSPs and thicker 4th-and 5th-order sands than the transgressive systems tract(TST).In terms of bathymetry,it is noted that irrespective of systems tracts,the RSP Index(RI)decreases from the proximal shallow/inner shelf settings to the more distal outer shelf areas.Amongst all three systems tracts,intervals interpreted as lowstand prograding complexes contain the best developed sands and highest RSP.Sand development within the LSTs has been controlled by a pronounced growth fault regime accompanied by high subsidence and sedimentation rates.This is linked to the basinward migration of the sands during prolonged sea-level fall,creating significant accommodation space for sand deposition.On the other hand,the TSTs known to mark periods of progressive sea-level rise and landward migration of sandy facies,show thinner sands enclosed in much thicker,laterally extensive,and better-preserved deeper marine shales.Interpreted seismic sections indicate intense growth faulting and channelization that influenced the syn-and postdepositional development of the sand packages across the field.The initial timing of deformation of subregional faults in this area coincides with periods of abrupt falls in sea level.This approach could be useful for predicting sand-prone areas in frontier fields as well as possible reservoir-seal parameters required for some aspects of petroleum system analysis and quick-look volume estimation.

Method and Description of Sedimentary System Characterization Based on Sequence Stratigraphy

A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.

Biostratigraphy,Microfacies,Sedimentary Environments and Sequence Stratigraphy of the Late Devonian-Carboniferous Deposits at the Anarak Section,Central Iran

The Late Devonian-early Carboniferous deposits of the Anarak section in northeastern Isfahan,Central Iran,evaluated based on conodont biostratigraphy,sedimentary environment and sequence stratigraphy.According to the field observations,five lithological units were identified.Investigating the conodont fauna of the Late Devonian-Carboniferous(Mississippian-Pennsylvanian)deposits of Bahram,Shishtu,and Qaleh(Sardar 1)formations in Anarak section led to the identification of 67 species of 18 conodont genera,and accordingly 22 conodont biozones were differentiated.The correlation of sea-level change curves,regarding to the conodont biofacies with the global sea-level curve,demonstrates the relative correlation in the mentioned times due to the shallow condition of the central Iran basin compared to the European and American basins.The microfacies analysis led to the identification of 12 microfacies related to the open sea,bioclastic barrier,lagoon and tidal flat sub-sedimentary environments in a homoclinal carbonate ramp environment.Based on sequence stratigraphy studies,three 3rd order sequences were identified.The first sequence,which is of the Late Devonian(upper part of the Bahram Formation,32.5 m),the second sequence(12.5 m)is the Late Devonian(uppermost part of the Bahram Formation),and the third sequence(68 m)is the early Carboniferous(the Shishtu I Formation).

Integration of Sequence Stratigraphic Analysis and 3D Geostatistical Modeling of Pliocene–Pleistocene Delta,F3 Block,Netherlands

This research is focused on the analysis of the sequence stratigraphic units of F3 Block,within a wave-dominated delta of Plio–Pleistocene age.Three wells of F3 block and a 3D seismic data,are utilized in this research.The conventional techniques of 3D seismic interpretation were utilized to mark the 11 surfaces on the seismic section.Integration of seismic sequence stratigraphic interpretation,using well logs,and subsequent 3D geostatistical modeling,using seismic data,aided to evaluate the shallow hydrocarbon traps.The resulting models were obtained using System Tract and Facies models,which were generated by using sequential stimulation method and their variograms made by spherical method,moreover,these models are validated via histograms.The CDF curve generated from upscaling of well logs using geometric method,shows a good relation with less percentage of errors(1 to 2 for Facies and 3 to 4 for System Tract models)between upscaled and raw data that complements the resulted models.These approaches help us to delineate the best possible reservoir,lateral extent of system tracts(LST and/or HST)in the respective surface,and distribution of sand and shale in the delta.The clinoform break points alteration observed on seismic sections,also validates the sequence stratigraphic interpretation.The GR log-based Facies model and sequence stratigraphy-based System Tract model of SU-04-2 showed the reservoir characteristics,presence of sand bodies and majorly LST,respectively,mainly adjacent to the main fault of the studied area.Moreover,on the seismic section,SU-04-2 exhibits the presence of gas pockets at the same location that also complements the generated Facies and System Tract models.The generated models can be utilized for any similar kind of study and for the further research in the F3 block reservoir characterization.

Sequence Stratigraphy of the Desert System: A Case Study of the Lower Cretaceous in the Kuqa Basin in Xinjiang, Northwestern China

The Lower Cretaceous strata in the Kuqa Basin in Xinjiang are marked by a set of arid red beds. Several types of sedimentary fades can be identified in this set of arid red beds: mudstones of the plaza and intracontinental sebkha, aeolian sandstones, sandy conglomerates of the intermittent river, conglomerates of the pluvial fan, etc. These types of sedimentary facies constitute a typical desert system. Therefore, the Cretaceous strata in the Kuqa Basin provide a favorable condition for studies of sequence stratigraphic divisions of the desert system. With the rise and fall of the base level of the sedimentary basin, cyclicity is clearly revealed in stratigraphic records, which helps the identification of the third-order sequences. Based on the cyclicity in stratigraphic records, 5 third-order sequences can be found in the strata of the Early Cretaceous in the Kuqa Basin. These sequences comprise a second-order tectonic sequence. The primary feature of these third-order sequences is of an upward-fining sedimentary succession formed by a succession of 'coarse sediments of the alluvial system-fine sediments of the lake system'. The result of this study shows that aeolian sandstones are the best reservoirs of natural gas in the Cretaceous strata in the Kuqa Basin, and that the Kela-2 gas field is the first large gas field dominated by aeolian sandstone reservoirs in China.

Upper Devonian and Lower Carboniferous Sequence Stratigraphy of South China

In South China four depositional sequences are recognized in the upper part of Upper Devonian and Tournaisian. They are named SQ0 SQ1, SQ2 and SQ3 in ascending order. SQ0 is Strunian (uppermost Devonian), and the other three Tournaisian in age. These four depositional sequences appear to correlate fairly well with the four sequence recognized in Europe, North America and other areas. This may suggest that these sequences are synchronous depos- its resulted from the eustatic changes. The present study on sequence stratigraphy, biostratigraphy and event stratigraphy indicates that in neritic facies areas of South China, the Devonian-Carboniferous boundary, matching the boundary between Siphonodella praesulcata zone and S. sulcata zone in pelagic facies areas, is not only higher than the top of the Cystophrentis zone, but also higher than the top of the Devonian-Carboniferous boundary event bed. In neritic facies areas, the Devonian-Carbonifrerous boundary is marked by the most distinct transgressive surface within the Cystophrentiseudouralina interval zone, i. e. at the base of the TST of the SQ1. This boundary coincides with the top surface of the event bed resulted from the eustatic fall, and approximately corresponds to the basal part of Rseudouralina assemblage zone.

Sequence Stratigraphy of the Permian--Triassia Boundary Section of Changxing, Zhejiang, Southern China

Three third-order sequences and about one hundred high-frequency cycles or Milankovitchcycles within the Late Permian Changxingian to Early Triassic Griesbachian are identified in theMeishan Section of Changxing, Zhejiang Province, southern China, the candidate stratotype sec-tion of the global Permo-Triassic boundary, based on a detailed study of the biological,ecological and high-resolution allochthonous cyclic events, microfacies and depositional systems.Furthermore, the stacking pattern of the depositional systems across various Changxingian andGriesbachian sedimentary facies of the Lower Yangtze and the sequence stratigraphic frameworkare outlined with the Meishan section as the principal section. In this paper the habitat types offossil biota are applied to semiquantitative palaeobathymetry and the study of relative sea levelchanges.

Carbonate Sequence Stratigraphy of a Back-Arc Basin: A Case Study of the Qom Formation in the Kashan Area, Central Iran

The Qom Formation comprises Oligo-Miocene deposits from a marine succession distributed in the Central Basin of Iran. It is composed of five members designated as A-F. Little previous work exists on the sequence stratigraphy. Based on an integrated study of sequence stratigraphy with outcrop data, wells and regional seismic profiles, the Qom Formation is interpreted as a carbonate succession deposited in a mid.Tertiary back-arc basin. There are two second-order sequences （designated as SS1 and SS2） and five third-order sequences （designated as S1-S5）. Five distinct systems tracts including transgressive, highstand, forced regressive, slope margin and Iowstand have been recognized. The relationship between the sequences and lithologic sub-units has been collated and defined （S1 to S5 individually corresponding to A-C1, C2--C4, D-E, the lower and upper portions of F）; a relative sea level change curve and the sequence stratigraphic framework have been established and described in detail. The coincidence of relative sea level change between that of the determined back-arc basin and the world indicates that the sedimentary cycles of the Qom Formation are mainly controlled by eustatic cycles. The variable combination of the systems tracts and special tectonic-depositional setting causally underpin multiple sequence stratigraphic framework styles seen in the carbonates of the back-arc basin revealing： （1） a continental margin basin that developed some form of barrier, characterized by the development of multiple cycles of carbonate-evaporites; （2） a flat carbonate ramp, which occurred on the southern shelf formed by the lack of clastic supply from nearby magmatic islands plus mixed siliciclastics and carbonates that occurred on the northern shelf due to a sufficient clastics supply from the land; and （3） a forced regressive stratigraphic stacking pattern that occured on the southern shelf and in basin lows due to the uplifting of the southern shelf. Thick and widespread aggradational framework limestone usually occurs in the initial sequences （S1 and S3） of the supersequence, which led to preferential oil reservoir deposition but a lack of source and cap rocks, whereas the retrogradational and progradational framework limestone usually occurs in the later sequences （S2 and S4-S5） of the supersequence, which results in two perfect sets of source, reservoir and cap rock assemblies, so that the limestone in sub-member C2-C4 and the F-Member can be predicted as important objects for oil exploration.

A Scheme of the Hierarchy for Sequence Stratigraphy

Depositional sequences may be distinguished into six ranks of units as giga-, mega-, meso-, ortho-, sub- and micro-sequence, and are interpreted to be formed during the eustatic cycles with time-intervals of 500-6000 Ma, 60-120 Ma, 30-40 Ma, 2-5 Ma, 0.1-0.4 Ma and 0.02-0.04 Ma respectively. All of them are thought to be essentially related to cosmological cycles, except the megasequence which may be caused by the long-term geothermal cycles on cratons. We deem that the depositional sequences, though often influenced variably by local tectonics and other factors, are primarily global and periodic in nature. We also hold that as one of the planets within the Galaxy, the earth must have been affected in various ways by other asteroids, and that the depositional sequences are merely the responses of the hydrosphere to the cosmological cycles in sedimentation.

Late Carboniferous-Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin,North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous-Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.

Origin of Molar-Tooth Structure Based on Sequence-Stratigraphic Position and Macroscopic Features: Example from Mesoproterozoic Gaoyuzhuang Formation at Jixian Section, Tianjin, North China

Both the macroscopic feature and the sequence-stratigraphic position of the molar-tooth structure developed in the third member of the Gaoyuzhuang （高于庄） Formation at the Jixian （蓟县） Section in Tianjin （天津） can provide some useful information about its origin and can reveal some problems to be further researched in the future. The Mesoproterozoic Gaoyuzhuang Formation is a set of 1 600 m thick carbonate strata. This formation can be divided into four members. The first member is mainly made up of stromatolitic dolomites; the second is marked by a set of manganese dolomites; the third is mainly composed of lamina limestones with the development of molar-tooth strcutures; the fourth is a set of stromatolitic-lithoherm dolomites. According to lithofacies and its succession, several types of meter-scale cycles can be discerned in the Gaoyuzhuang Formation： the L-M type, the subtidal type and the peritidal type. There is a regularly vertical stacking pattern for meter-scale cycles in the third-order sequence. Therefore, the Mesoproterozoic Gaoyuzhuang Formation can be divided into 13 third-order sequences （SQ1 to SQ13 ） and can further be grouped into 4 second-order sequences. The third member is marked by lamina limestones and can be grouped into three third-order sequences （SQ9 to SQ11 ）. The molar-tooth structure is developed in the middle part of the third sequence, i.e. SQH , in the third member. Several features of this kind of molar-tooth structure reflect some features of carbonate sedimentation in the Precambrian, such as the particular configuration, abundant organic matter, and easy silication. Stromatolites are chiefly formed in a shallow tidal-flat environment; lamina are mainly formed in the shallow ramp and molar-tooth structures are mainly generated in a relatively more deep-water environment from the middle to the deep ramp. Therefore, similar to stromatolite and lamina, the molartooth structure might also be a kind of bio-sedimentation structure. This suggestion is based on macroscopic observation and the sedimentary-facies analysis of the molar-tooth structures from the sequencestratigraphic position. These features of Precambrian sedimentation also reveal the problem of Precambrian carbonate sedimentation. With more detailed study, a more practical solution for these problems may be obtained in the future.

Sequence Stratigraphy of Upper Proterozoic Glacigenous Rocks in Southeastern Margin of Yangtze Platform

The Upper Proterozoic glacigenous rocks in the southeastern margin of the Yangtze platform were accumulated in a glacially influenced marine environment with extension set- ting. Two type I depositional sequences have been identified in the glacioclastic sediments the their boundaries enhanced by both tectonism and the incision of glaciation. The lower sequence (SQ1), comprising Changan and Fulu formations (Guangxi Province), Jiangkou and Xiangmen formations(Hunan Province) and their equivalents, is bounded by erosional unconformities both at the base and on the top. The upper sequence (SQ2), composed mainly of Nantuo Formation and its equivalents, is confined by an erosional unconformity at the base and covered by an exposure surface of karstification on the top. The depositional systems tracts are difficult to be distinguished directly and mainly characterized by the variation in glacioclastic supplies. Two types of episodic parasequeuces can be identified in the glacigenous rocks and are related to the evolution of depositional systems tracts. Both the sequences and parasequences are caused by autocyclic mechanism. The present research shows that the Upper Proterozoic glacigenous deposits are of significance for the analysis of the tectonic evolution of the Late Precambrian basin in South China.

Sedimentology and Sequence Stratigraphy of Marine to Lacustrine Deltaic Deposits in a Craton Basin and Their Controlling Factors: Shan 2 Member–He 8 Member(Guadalupian–Lopingian, Permian), Southeast Ordos Basin, North China

The Shan 2 Member, Shan 1 Member and He 8 Member of the Mid-Late Permian Shanxi and lower Xiashihezi formations, in the southeastern Ordos Basin, together comprise -150 m of deltaic deposits. This sequence records an overall evolution from deep marine environment to shallow lake associated with braided river, braided river delta and meandering river delta. Core description, well log interpretation, and stable isotope analysis, including carbon, oxygen and strontium, were conducted to understand the sedimentary evolution of Shan 2 to He 8 Member. The Shanxi Formation, which consists of the Shan 2 and Shan 1 members, is characterized by a tidal-influenced meandering river delta environment and a higher j13C value and S7Sr/S6Sr ratio and a lower jlSo value. The He 8 Member, the basal part of the Xiashihezi Formation, is featured by a braided river to braided river delta system and a lower j13C value, S7Sr/S6Sr ratio, and a higher jlSo value. Four third-order depositional sequences separated by five sequence boundaries are determined. Coarsening upward sequences of the Shan 2 Member-He 8 Member indicate a general regression trend, which can be correlated to global sea-level fall occurring during the Roadian-Wuchiapingian, as also evidenced by previous published zircon U-Pb results. The coal-bearing sequence （Shanxi Formation） to non-coal-bearing sequence （He 8 Member）, as well as a decrease of 87Sr/86Sr, suggest a trend from humid to arid climates. A combined effect of sea-level drop and a small uplift at the end of Shanxi Formation are proposed.

Sequence stratigraphy, paleogeography, and coal accumulation regularity of major coal-accumulating periods in China

There are 9 major coal-accumulating periods during geological history in China,including the Early Carboniferous,Late Carboniferous-Early Permian,Middle Permian,Late Permian,Late Triassic,Early-Middle Jurassic,Early Cretaceous,Paleogene and Neogene.The coal formed in these periods were developed in different coal-accumulating areas(CAA)including the North China,South China,Northwest China,Northeast China,the Qinghai–Tibet area,and China offshore area.In this paper,we investigated depositional environments,sequence stratigraphy,lithofacies paleogeography and coal accumulation pattern of five major coal-accumulating periods including the Late Carboniferous to Middle Permian of the North China CAA,the Late Permian of the South China CAA,the Late Triassic of the South China CAA,the Early-Middle Jurassic of the North and Northwest China CAA,and the Early Cretaceous in the Northeast China CAA.According to distribution of the coal-bearing strata and the regional tectonic outlines,we have identified distribution range of the coal-forming basins,sedimentary facies types and coal-accumulating models.The sequence stratigraphic frameworks of the major coal-accumulating periods were established based on recognition of a variety of sequence boundaries.The distribution of thick coals and migration patterns of the coal-accumulating centers in the sequence stratigraphic framework were analyzed.The lithofacies paleogeography maps based on third-order sequences were reconstructed and the distribution of coal accumulation centers and coal-rich belts were predicted.

Biostratigraphy and Sequence Stratigraphy of the Gurpi Formation at Deh Dasht Area, Zagros Basin, SW Iran

A rich assemblage of planktonic foraminifera has been studied from an outcrop of the Gurpi Formation, the hydrocarbon source rock in the southwest Iran, Deh Dasht area（Kuh-e Siah anticline）. Based on the distribution of the planktonic foraminifera, eight biozones have been recognized that included：Dicarinella concavata Interval Zone（Earliest Santonian）, Dicarinella asymetrica Total Range Zone（Santonian to Earliest Campanian）, Globotruncanita elevata Partial Range Zone（Early Campanian）, Globotruncana ventricosa Interval Zone（Middle to Late Campanian）, Radotruncana calcarata Total Range Zone（Late Campanian）, Globotruncanella havanensis Partial Range Zone（Late Campanian）, Globotruncana aegyptiaca Interval Zone（Late to latest Campanian）, Gansserina gansseri Interval Zone（Latest Campanian to Early Maastrichtian）. These biozones indicates that the Gurpi Formation deposited during the Early Santonian- Early Maastrichtian. These biozones are compared to the most standard biozones defined in Tethysian domain. Based on distribution of morphotype groups of planktonic foraminifera, planktonic to benthic ratio（P/B） and content of carbonate, nine third-order sequences are recognized.

Diagenesis and Diagenetic Evolution of Deltaic and Neritic Gas-Bearing Sandstones in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin: Implications for Depositional Environments and Sequence Stratigraphy Controls

Gas-bearing deposits in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin consist of shoreface sandstones of the highstand systems tract（HST） and transgressive systems tract（TST）, and deltaic sandstones of the lowstand systems tract（LST） and falling stage systems tract（FSST）.Detailed petrographic observations suggest that the diagenetic features and related evolution of these deposits cannot be simply characterized and demonstrated in the depth domain.However, the occurrence of diagenetic minerals systematically depends on the studied interval within the HST, TST, LST, and FSST; therefore, diagenesis in this region can be better constrained when studied in the context of the depositional environments and sequence stratigraphic framework.The eogenetic processes in such settings include：（1） microcrystalline siderite precipitated as concretions in almost all environments and systems tracts, which inhibited further mechanical compaction;（2） grain dissolution and kaolinitization occurred in shoreface HST sandstones and deltaic LST and FSST sandstones;（3） glaucony was locally observed, which did not clearly reflect the controls of facies or sequence stratigraphy; and（4） cementation by pyrite aggregates occurred in the shoreface HST sandstones and deltaic LST sandstones.The mesogenetic diagenesis includes：（1） partial conversion of kaolinite into dickite in deltaic LST sandstones, and minor chlorite cementation in deltaic FSST sandstones;（2） transformation of kaolinite into illite and quartz cementation in deltaic LST and FSST sandstones;（3） frequent precipitation of ankerite and ferroan calcite in shoreface TST sandstones and early HST sandstones, forming baffles and barriers for fluid flow, with common calcite in shoreface HST sandstones as a late diagenetic cement; and（4） formation of dawsonite in the deltaic LST and FSST sandstones, which is interpreted to be a product of the invasion of a CO2-rich fluid, and acts as a good indicator of CO2-bearing reservoirs.This study has thus constructed a reliable conceptual model to describe the spatial and temporal distribution of diagenetic alterations.The results may provide an entirely new conceptual framework and methodology for successful gas exploration in the continental margins of offshore China, thus allowing us to predict and unravel the distribution and quality evolution of clastic reservoirs at a more detailed and reliable scale.

Event Stratigraphy, Biostratigraphy and Sequence Stratigraphy of Neoproterozoic in North China

The aim of this study is to discuss the chronostratigraphy, catastrophic event stratigraphy, biostratigraphy and sequence stratigraphy of Neoproterozoic. In the eastern part of the North China, the Neoproterozoic consists of Qingbaikou System (1 000-800 Ma) and Sinian System (800-600 Ma). The Qingbaikou System is widely distributed over the whole area and the Sinian System only in the eastern and southern parts of the plate. In this paper, we discuss the age limit of the formations, and try to establish the Neoproterozoic chronostratigraphic frame, the ages of which are partly based on recently obtained carbonate whole rock Pb Pb isotope. Based on the event records of ancient earthquake, which are well developed in Sinian carbonates, “a vibrational liquefaction seismic sequence” in carbonate rocks is established. We propose a time correlation for the Sinian formation in eastern North China, on the bases of event records of earthquake in combination with biostratigraphy, and thus revise the traditional correlation scheme that has been used for nearly 30 years. Some biostratigraphic results were obtained in fossil microplants, megafossils and metazoans in North China. A large amount of big double layered and complex ornamented acritarchs are found in Qingbaikou and Sinian systems. On the basis of the correlation by earthquake events, the Huainan fauna is regarded as Late Sinian, probably between 700 Ma and 600 Ma. Altogether 16 depositional sequences are distinguished in the Neoproterozoic, with an average time interval of about 15-16 Ma.

On the Carboniferous Sequence Stratigraphy in the Tazhong Area, Xinjiang——A Model of the Sequence Stratigraphy Framework of Intracratonic Depressional Basins

The Carboniferous prototype sedimentary basin in the Tazhong (Central Tarimbasin) area is recognized as a compressive intracratonic depressional one. Three type Ⅰ sequenceboundaries and three type Ⅱ sequence boundaries can be identified in the CarboniferousSystem, which can accordingly be divided into five sedimentary sequences. These sequencespossess stratigraphic characters of the standard sequence and correspond to the depositionalstratigraphic unit of a third-order eustatic cycle. They can be regionally or globally correlatedwith each other. The framework of sequence stratigraphy of the intracratonict basin in thestudy area distinctly differs from that of the passive continental-margin basin in the lack ofdepositional systems of early-middle lowstand, poor development of the deeply incised valleyand condensed section of the maximum sea-flood, good development of type Ⅱ sequenceboundaries and coastal plain depositional systems coexisting with shelf-type fan deltas underwet climatic conditions, Which consequently led to the formation of a paralic lithofacies frame-work.