Estimating shear strength of high-level pillars supported with cemented backfilling using the HoekeBrown strength criterion

Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.

Leave or Stay?Antecedents of High-level Talent Migration in the Pearl River Delta Megalopolis of China:from a Perspective of Regional Differentials in Housing Prices

Rapid urbanization and population growth have triggered an increase in urban housing demand and rising housing prices,which can influence the migration intention of high-level talents.Much work within the literature has focused more on the migration of the general public.However,antecedents of migration intention and the impact of housing prices on the migration of high-level talents remain unclear.Therefore,based on the push-pull theory,this study investigates the influencing factors of talent migration intention and explores the role of housing prices.This study reveals a complex mechanism underlying migration decisions by using logistic regression models and survey data of high-level talents in the Pearl River Delta(PRD)megalopolis of China.The results indicate that:1)in high house-price regions,social integration is the primary push factor,and the main factors for retaining talents are the expectation of future work and intimate family relationships;2)in medium house-price regions,the main factors that attract talents are the current salary level and close family ties;3)in low house-price regions,living convenience is a determining factor in retaining talents.This study provides a new perspective for talent mobility research and offers valuable inputs for retaining and attracting talents in different economic development regions.Findings are of great significance for formulating talent introduction policies and forming a new pattern of rational spatial docking and effective allocation of human resources.

An Exploratory Practice of Integration of Industry and Education in High-level Programming Language Course in the Background of New Engineering

This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory rather than on practice,the low enthusiasm of students for learning,and the weak practical ability of students.In response to the needs of enterprises for talents under the background of New Engineering,especially the cultivation of students’adaptability and practical abilities towards future industries to improve students’knowledge and problemsolving abilities to keep up with the modern technology,this paper proposes the ways and methods to reform and explore the teaching content and teaching methods by integrating industry and education,assisting teaching according to industrial demands,and lowering technology barriers of new technology.The practical effect is evaluated through a survey in class and the follow-up questionnaire after class,and the results show that the effect of the practice is effective.

The Beishan underground research laboratory for geological disposal of high-level radioactive waste in China:Planning, site selection,site characterization and in situ tests

With the rapid development of nuclear power in China, the disposal of high-level radioactive waste（HLW） has become an important issue for nuclear safety and environmental protection. Deep geological disposal is internationally accepted as a feasible and safe way to dispose of HLW, and underground research laboratories（URLs） play an important and multi-faceted role in the development of HLW repositories. This paper introduces the overall planning and the latest progress for China＇s URL. On the basis of the proposed strategy to build an area-specific URL in combination with a comprehensive evaluation of the site selection results obtained during the last 33 years, the Xinchang site in the Beishan area,located in Gansu Province of northwestern China, has been selected as the final site for China＇s first URL built in granite. In the process of characterizing the Xinchang URL site, a series of investigations,including borehole drilling,geological mapping, geophysical surveying,hydraulic testing and in situ stress measurements, has been conducted. The investigation results indicate that the geological,hydrogeological, engineering geological and geochemical conditions of the Xinchang site are very suitable for URL construction. Meanwhile, to validate and develop construction technologies for the Beishan URL, the Beishan exploration tunnel（BET）, which is a 50-m-deep facility in the Jiujing sub-area, has been constructed and several in situ tests, such as drill-and-blast tests, characterization of the excavation damaged zone（EDZ）, and long-term deformation monitoring of surrounding rocks, have been performed in the BET. The methodologies and technologies established in the BET will serve for URL construction.According to the achievements of the characterization of the URL site, a preliminary design of the URL with a maximum depth of 560 m is proposed and necessary in situ tests in the URL are planned.

High-level radioactive waste disposal in China: update 2010

For geological disposal of high-level radioactive waste （HLW）, the Chinese policy is that the spent nuclear fuel （SNF） should be reprocessed first, followed by vitrification and final disposal. The preliminary repository concept is a shaft-tunnel model, located in saturated zones in granite, while the final waste form for disposal is vitrified high-level radioactive waste. In 2006, the government published a long-term research and development （R＆D） plan for geological disposal of high-level radioactive waste. The program consists of three steps： （1） laboratory studies and site selection for a HLW repository （2006-2020）; （2） underground in-situ tests （2021-2040）; and （3） repository construction （2041-2050） followed by operation. With the support of China Atomic Energy Authority, comprehensive studies are underway and some progresses are made. The site characterization, including deep borehole drilling, has been performed at the most potential Beishan site in Gansu Province, Northwestern China. The data from geological and hydrogeological investigations, in-situ stress and permeability measurements of rock mass are presented in this paper. Engineered barrier studies are concentrated on the Gaomiaozi bentonite. A mock-up facility, which is used to study the thermo-hydro-mechano-chemical （THMC） properties of the bentonite, is under construction. Several projects on mechanical properties of Beishan granite are also underway. The key scientific challenges faced with HLW disposal are also discussed.

Design and development of large-scale in-situ PRACLAY heater test and horizontal high-level radioactive waste disposal gallery seal test in Belgian HADES

In Belgium,the Boom clay was selected as a potential host formation for the disposal of high-level radioactive waste（HLW）.To demonstrate the suitability of Boom clay for bearing thermal load induced by the HLW,a large-scale in-situ heater test,called PRACLAY heater test,will be conducted in the underground research laboratory（URL） in Mol.Owing to the limitations of the test（a short period of time compared with that considered in a real repository,different boundary conditions,etc.）,the test is designed to simulate,in a conservative way,the most critical state and phenomena that could occur in the host rock.The PRACLAY gallery was excavated at the end of 2007;the heating phase will begin in 2010 and will last for at least 10 years.The PRACLAY gallery itself leaves an opportunity to study the possibilities of sealing a disposal drift in Boom clay and testing the feasibility of hydraulic cut-off of any preferential pathway to the main access gallery through the excavation damage zone（EDZ） and the lining with a seal in a horizontal drift（horizontal seal）.Indeed,this is a generic problem for all deep geological disposal facilities for HLW.An annular seal made of compacted swelling bentonite will be installed in the front of the heated part of the PRACLAY gallery for these purposes.This paper provides detailed considerations on the thermo-hydro-mechanical（THM） boundary conditions for the design of the PRACLAY heater test and the seal test with the support of numerical calculations.It is believed that these important items considered in the PRACLAY heater test design also constitute key issues for the repository design.The outcome of the PRACLAY heater test will be an important milestone for the Belgian repository design.

Migration of Some Elements and Radionuclides across aGranite-Granite Contact Zone: A Natural Analoguefor Safe Disposal of High-Level Radwastes

Abstract Elements and natural radionuclides in the contact zone of two granites with different ages would migrate from one to the other because of the difference in their chemical contents and later water-rock interactions. This migration could serve as an analogue for the near-field process of radwastes in a high-level radwaste deep geological disposal repository.

Three-dimensional numerical simulation of methane drainage by high-level drill holes in a lower protective coal seam with a “U” type face

Different drill-hole positions may produce different drainage results in low protective coal seams.To investigate this possibility,a 3D stope model is established,which covers three kinds of drill holes.The FLUENT computational fluid mechanics software is used to solve the mass,momentum and species conservation equations of the model.The spatial distributions of oxygen and methane was obtained by calculations and the drainage results of different drill-hole positions were compared.The results show that,from top to bottom,methane dilution by oxygen weakens gradually from the intake to the return side,and methane tends to float;methane and oxygen distribute horizontally.The high-level crossing holes contribute to better methane drainage and a greater level of control.Around these holes,the methane density decreases dramatically and a "half circle"distribution is formed.The methane density decreases on the whole,but a proportion of the methane moves back to deep into the goaf.The research findings provide theoretical grounds for methane drainage.

Main outcomes from in situ thermo-hydro-mechanical experiments programme to demonstrate feasibility of radioactive high-level waste disposal in the Callovo-Oxfordian claystone

In the context of radioactive waste disposal,an underground research laboratory(URL)is a facility in which experiments are conducted to demonstrate the feasibility of constructing and operating a radioactive waste disposal facility within a geological formation.The Meuse/Haute-Marne URL is a sitespecific facility planned to study the feasibility of a radioactive waste disposal in the Callovo-Oxfordian(COx)claystone.The thermo-hydro-mechanical(THM)behaviour of the host rock is significant for the design of the underground nuclear waste disposal facility and for its long-term safety.The French National Radioactive Waste Management Agency(Andra)has begun a research programme aiming to demonstrate the relevancy of the French high-level waste(HLW)concept.This paper presents the programme implemented from small-scale(small diameter)boreholes to full-scale demonstration experiments to study the THM effects of the thermal transient on the COx claystone and the strategy implemented in this new programme to demonstrate and optimise current disposal facility components for HLW.It shows that the French high-level waste concept is feasible and working in the COx claystone.It also exhibits that,as for other plastic clay or claystone,heating-induced pore pressure increases and that the THM behaviour is anisotropic.

High-level expression and purification of Plutella xylostella acetylcholinesterase in Pichia pastoris and its potential application

The acetylcholinesterase 2（AChE2）cloned from Plutella xylostella was first successfully expressed in methylotrophic yeast Pichia pastoris GS115.One transformant with high-level expression of the recombinant AChE（rAChE,23.2 U mL-1in supernatant）was selected by plating on increasing concentrations of antibiotic G418 and by using a simple and specific chromogenic reaction with indoxyl acetate as a substrate.The maximum production of r ACh E reached about 11.8 mg of the enzyme protein per liter of culture.The r ACh E was first precipitated with ammonium sulfate（50%saturation）and then purified with procainamide affinity column chromatography.The enzyme was purified 12.1-fold with a yield of 22.8%and a high specific activity of 448.3 U mg-1.It was sensitive to inhibition by methamidophos and pirimicarb,the calculated 50% inhibitory concentration（IC50）values of the two pesticides were 0.357 and 0.888 mg L-1,respectively,and the calculated 70% inhibitory concentration（IC70）values were 0.521 and 0.839 mg L-1,respectively.The results suggested that it has a potential application in the detection of pesticide residues.

On area-specific underground research laboratory for geological disposal of high-level radioactive waste in China

Underground research laboratories （URLs）, including ＂generic URLs＂ and ＂site-specific URLs＂, are un- derground facilities in which characterisation, testing, technology development, and/or demonstration activities are carried out in support of the development of geological repositories for high-level radioactive waste （HLW） disposal. In addition to the generic URL and site-specific URL, a concept of ＂areaspecific URL＂, or the third type of URL, is proposed in this paper. It is referred to as the facility that is built at a site within an area that is considered as a potential area for HLW repository or built at a place near the future repository site, and may be regarded as a precursor to the development of a repository at the site. It acts as a ＂generic URL＂, but also acts as a ＂site-specific URL＂ to some extent. Considering the current situation in China, the most suitable option is to build an ＂area-specific URL＂ in Beishan area, the first priority region for China＇s high-level waste repository. With this strategy, the goal to build China＇s URL by 2020 mav be achieved, but the time left is limited.

Controlling mine pressure by subjecting high-level hard rock strata to ground fracturing

When mining extra-thick coal seams,the main cause of strong ground pressure are the high-level thick and hard strata,but as yet there is no active and effective control technology.This paper proposes the method of subjecting hard roofs to ground fracturing,and physical simulation is used to study the control effect of ground fracturing on the strata structure and energy release.The results show that ground fracturing changes the structural characteristics of the strata and reduces the energy release intensity and the spatial extent of overburden movement,thereby exerting significant control on the ground pressure.The Datong mining area in China is selected as the engineering background.An engineering test was conducted on site by ground horizontal well fracturing,and a 20-m-thick hard rock layer located 110 m vertically above the coal seam was targeted as the fracturing layer.On-site microseismic monitoring shows that the crack propagation length is up to 216 m and the height is up to 50 m.On-site mine pressure monitoring shows that(1)the roadway deformation is reduced to 100 mm,(2)the periodic weighting characteristics of the hydraulic supports are not obvious,and(3)the ground pressure in the working face is controlled significantly,thereby showing that the ground fracturing is successful.Ground fracturing changed the breaking characteristics of the high-level hard strata,thereby helping to ameliorate the stress concentration in the stope and providing an effective control approach for hard rock.

Experimental study on the physico-mechanical properties of Tamusu mudstone — A potential host rock for high-level radioactive waste in Inner Mongolia of China

Tamusu mudstone, located in Bayin Gobi Basin in Inner Mongolia of China, has been selected as a potential host rock for high-level radioactive waste(HLW) disposal in China. A series of tests has been carried out, including X-ray diffraction(XRD) tests, scanning electron microscopy(SEM) tests, disintegration tests, permeability tests and triaxial compression tests, to estimate the physico-mechanical properties of Tamusu mudstone in this work. The mineral composition of Tamusu mudstone was analyzed and it was considered as a stable rock due to its low disintegration rate, i.e. approximately 0.11%after several wet/dry cycles. Based on the results of permeability test, it was found that Tamusu mudstone has a low permeability, with the magnitude of about 10—20m^(2). The low permeability makes the mudstone well prevent nuclide migration and diffusion, and might be influenced by temperature.The triaxial tests show that Tamusu mudstone is a stiff mudstone with high compressive strength, which means that the excavation disturbed zone would be smaller compared to other types of mudstone due to construction and operation of HLW repositories. Finally, the properties of Tamusu mudstone were compared with those of Opalinus clay, Callovo-Oxfordian(COx) argillite, and Boom clay to further discuss the possibility of using Tamusu mudstone as a potential nuclear waste disposal medium.

A novel quantum information hiding protocol based on entanglement swapping of high-level Bell states

Using entanglement swapping of high-level Bell states, we first derive a covert layer between the secret message and the possible output results of the entanglement swapping between any two generalized Bell states, and then propose a novel high-efficiency quantum information hiding protocol based on the covert layer. In the proposed scheme, a covert channel can be built up under the cover of a high-level quantum secure direct communication （QSDC） channel for securely transmitting secret messages without consuming any auxiliary quantum state or any extra communication resource. It is shown that this protocol not only has a high embedding efficiency but also achieves a good imperceptibility as well as a high security.

ON THE OPTIMIZATION OF VLSI ALLOCATION IN HIGH-LEVEL SYNTHESIS

Allocation is one of main tasks in the high-level synthesis. It includes module , functional unit allocation, storage allocation and interconnection allocation. This paper models the allocation problem as cluster analysis and applies a new algorithm, neighbor state transition (NST) algorithm, for cluster optimization. It is proved that the algorithm produces an asymptotically global optimal solution with the upper bound on the cost function (1 + O(1/n)2-ε)F*, When F" is the cost of the optimum solution, n is the problem size and e is a positive parameter arbitrarily close to zero. The numerical examples show that the NST algorithm produces better results compared to the other known methods.

Corrosion behavior of high-level waste container materials Ti and Ti-Pd alloy under long-term gamma irradiation in Beishan groundwater

Titanium and titanium-palladium alloys are important potential materials for nuclear waste container,which will endure both intenseγ-irradiation and groundwater erosion.Therefore,it is very important to investigate the corrosion behavior of the container materials.In this research,the cumulative dose effect of TA8-1 type titanium-palladium alloy(TA8-1)and TA2-type pure titanium(TA2)underγ-irradiation was studied based on the geological disposal of nuclear wastes.The irradiation experiments were performed at room temperature using^(60)Co gamma sources with a 5.0-kGy·h^(-1)intensity for 40,80 or 160 days,respectively.The pH value and conductivity of Beishan groundwater were investigated.The results showed that the pH value changed from alkaline(8.22)to acidic(2.46 for TA8-1 and 2.44 for TA2),while the un-irradiated solution remained alkaline(8.17 for TA8-1 and 8.20 for TA2)after 160 days.With the increase of irradiation dose,the conductivity increases rapidly and then tends to become stable,which indicates that the titanium dioxide corrosion layer formed on the surface of the sample surface effectively prevents further corrosion.Meanwhile,XRD and SEM-EDS analysis results show that the main components of corrosion products are TiO_(2) and TiO.The titanium on the surface of the sample is oxidized,resulting in slight uneven local corrosion.The results show that TA8-1 and TA2 are suitable to be used as candidate materials for high-level waste(HLW)disposal containers due to their excellent performance under long-term and high-dose irradiation corrosion.

Factors Influencing the Employment Intentions of High-level Talent in Sichuan Province

Based on available survey data and related literature regarding the employment intentions of high-level talent in Sichuan province,the factors influencing employment intentions were policy support,livability degree,social relations,and employment environments.By using the maximum likelihood estimation(MLE)function of structural equation modeling(SEM),the results indicated that these factors,if positive,could significantly enhance intentions to work in Sichuan.The cultural climate seems to have no obvious effect on intentions,but it indeed indirectly enhances their intentions by influencing the employment environments.To this end,provincial government authorities should carry out targeted policy support and campaigns to maximize the likelihood of attracting high-level talent.Efforts should also be made to maximize pull factors and minimize push factors to improve talent services and build a favorable living,working,and cultural environment for talent.Meanwhile,high-level talent should also make full use of the social capital and seize employment opportunities in a timely and accurate manner.

METHOD OF HIGH-LEVEL TECHNOLOGY MAPPING BASED ON KNOWLEDGE(RULE)

This paper studies the linkage problem between the result of high-level synthesis and back-end technology, presents a method of high-level technology mapping based on knowl edge, and studies deeply all of its important links such as knowledge representation, knowledge utility and knowledge acquisition. It includes: (1) present a kind of expanded production about knowledge of circuit structure; (2) present a VHDL-based method to acquire knowledge of tech nology mapping; (3) provide solution control strategy and algorithm of knowledge utility; (4)present a half-automatic maintenance method, which can find redundance and contradiction of knowledge base; (5) present a practical method to embed the algorithm into knowledge system to decrease complexity of knowledge base. A system has been developed and linked with three kinds of technologies, so verified the work of this paper.

Numerical analysis of thermal process in the near field around vertical disposal of high-level radioactive waste

For deep geological disposal of high-level radioactive waste(HLW)in granite,the temperature on the HLW canisters is commonly designed to be lower than100fiC.This criterion dictates the dimension of the repository.Based on the concept of HLW disposal in vertical boreholes,thermal process in the nearfield(host rock and buffer)surrounding HLW canisters has been simulated by using different methods.The results are drawn as follows:(a)the initial heat power of HLW canisters is the most important and sensitive parameter for evolution of temperaturefield;(b)the thermal properties and variations of the host rock,the engineered buffer,and possible gaps between canister and buffer and host rock are the additional key factors governing the heat transformation;(c)the gaps width and thefilling by water or air determine the temperature offsets between them.

Study on the residence time of deep groundwater for high-level radioactive waste geological disposal

Residence time of deep groundwater is one of the most important parameters in safety and performance assessment for high-level radioactive waste geological disposal. In this study, we collected the deep groundwater samples of Jijicao in Gansu Beishan pre-selected region. The deep groundwater residence time at two depths estimated by Helium-4 accumulation method were 3.8 ka and 5.0 ka respectively upon measurement and calculation, which indicates that the deep groundwater is not derived from the deep crust circulation process. Hence, deep groundwater is featured with long residence time as well as slow circulation and update rate, and such features are conductive to the safe disposal of high-level radioactive waste.