Multiple factors influencing high-purity indium electrolytic refining

The effects of various contaminants in the electrolytic refinement of indium were investigated using a glow discharge mass spectrometer(GDMS).The effects of several factors such as the indium ion(In3+)concentration,the sodium chloride(NaCl)concentration,the current density,the gelatin concentration,the pH,and the electrode distance,were examined.Significant variations in impurity levels concerning gelatin concentration were observed.Both the gelatin and In3+concentration were moderately positively correlated with the Pb content.The Sb concentration was associated positively with the NaCl concentration,while the Ti concentration had an adverse correlation with the NaCl concentration.The Bi element content was positively linked to the electrode distance.As the current density increased,Cu,Pb,and Bi impurities initially rose and then eventually declined.Notably,a critical current density of 45 A·m^(-2) was identified in this behavior.

Polydopamine-modified metal-organic frameworks nanoparticles enhance the corrosion resistance and bioactivity of polycaprolactone coating on high-purity magnesium

Biodegradable magnesium(Mg)and its alloys exhibit excellent biocompatibility and mechanical compatibility,demonstrating tremendous potential for applications in orthopedics.However,the rapid degradation rate has limited their clinical application.Polycaprolactone(PCL)is commonly employed as a polymer coating to impede the rapid degradation of Mg.Unfortunately,its long-term anti-corrosion capability and bioactivity are inadequate.To address these issues,polydopamine(PDA)-modified zeolitic imidazolate framework-8(PZIF-8)bioactive nanoparticles are fabricated and incorporated into the PCL coating.The PZIF-8 particles,featuring catechol motifs,can enhance the compactness of the PCL coating,reduce its defects,and possess biomineralization ability,thereby effectively improving its anti-corrosive and bioactive properties.Moreover,the active substances released from the degradation of the PZIF-8 particles such as Zn^(2+)and PDA are beneficial for osteogenesis.The corrosion tests indicate that the corrosion current density of PCL-treated sample decreases by more than one order of magnitude and the amount of H_(2)released decreases from 0.23±0.12 to 0.08±0.08 ml cm^(-2)after doping with the PZIF-8.Furthermore,the improved corrosion resistance and released PDA and Zn^(2+)from the coating can promote osteogenic differentiation by up-regulating the expression of alkaline phosphatase activity,related osteogenic genes,and proteins.In addition,in vivo implantation experiments in rabbit femur defects further offer strong evidence that the doping of PZIF-8 nanoparticles accelerates bone reconstruction of the PCL coating.In summary,this work implies a new strategy to fabricate a PCL-based coating on Mg-based implants by introducing the PZIF-8 particles for orthopedic applications.

Enhanced recovery of high-purity Fe powder from iron-rich electrolytic manganese residue by slurry electrolysis

Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.

Artificial neural network-based method for discriminating Compton scattering events in high-purity germaniumγ-ray spectrometer

To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resulting in an extremely low detection limit and improving the measurement accuracy.However,the complex and expensive hardware required does not facilitate the application or promotion of this method.Thus,a method is proposed in this study to discriminate the digital waveform of pulse signals output using an HPGe detector,whereby Compton scattering background is suppressed and a low minimum detectable activity(MDA)is achieved without using an expensive and complex anticoincidence detector and device.The electric-field-strength and energy-deposition distributions of the detector are simulated to determine the relationship between pulse shape and energy-deposition location,as well as the characteristics of energy-deposition distributions for fulland partial-energy deposition events.This relationship is used to develop a pulse-shape-discrimination algorithm based on an artificial neural network for pulse-feature identification.To accurately determine the relationship between the deposited energy of gamma(γ)rays in the detector and the deposition location,we extract four shape parameters from the pulse signals output by the detector.Machine learning is used to input the four shape parameters into the detector.Subsequently,the pulse signals are identified and classified to discriminate between partial-and full-energy deposition events.Some partial-energy deposition events are removed to suppress Compton scattering.The proposed method effectively decreases the MDA of an HPGeγ-energy dispersive spectrometer.Test results show that the Compton suppression factors for energy spectra obtained from measurements on ^(152)Eu,^(137)Cs,and ^(60)Co radioactive sources are 1.13(344 keV),1.11(662 keV),and 1.08(1332 keV),respectively,and that the corresponding MDAs are 1.4%,5.3%,and 21.6%lower,respectively.

Valence states, impurities and electrocrystallization behaviors during molten salt electrorefining for preparation of high-purity titanium powder from sponge titanium

High-purity titanium powder was prepared by molten salt electrorefining from sponge titanium in NaCl-KCl-TiClx salts. The titanium valence, purity and electrocrystallization during electrolysis process were studied. The XPS analysis showed that the titanium valences are mainly ＋4, ＋3 and ＋2 at the earlier, medium and later stages of electrolysis, respectively. During the electrolysis process, the contents of impurities Si, Cr, Mn, Al vary little, and the contents of impurities Fe, Cu, Ni decrease markedly, while the contents of impurities O, N, H increase obviously. The residual impurities are usually distributed in small tunnel of dendritic crystals. Enhancing the electrolysis temperature and prolonging the electrolysis time can increase the titanium particle size. The TEM analysis showed that the electrodeposited titanium is not a single crystal, but contains many nanostructured grains and subgrains, with grain size of 100-500 nm. The electrolysis mechanisms were also discussed.

GaSe/ZnS异质结的结构和界面性质的第一性原理研究

本文设计了一种GaSe/ZnS范德瓦耳斯异质结构(vdWH),并用第一性原理计算系统地分析了该异质结构的几何、电子、输运性质。通过结合能、声子谱、从头算分子动力学(AIMD)模拟验证了所构建GaSe/ZnS范德瓦耳斯异质结构的稳定性。详细计算了GaSe/ZnS vdWH界面性质中的平面平均电子密度差和平均静电势。结果表明,GaSe/ZnS vdWH是一种直接带隙为2.19 eV,载流子迁移率较高的异质结构。其中,沿x方向的电子迁移率可达1394.63 cm^(2)·V^(-1)·s^(-1),而沿y方向的电子迁移率可达1913.18 cm^(2)·V^(-1)·s^(-1),性能优异,有望应用于电子纳米器件。

Climate Responses to Direct Radiative Forcing of Anthropogenic Aerosols,Tropospheric Ozone,and Long-Lived Greenhouse Gases in Eastern China over 1951–2000

A unified chemistry-aerosol-climate model is applied in this work to compare climate responses to changing concentrations of long-lived greenhouse gases （GHGs, CO2, CH4, N2O）, tropospheric O3, and aerosols during the years 1951-2000. Concentrations of sulfate, nitrate, primary organic carbon （POA）, secondary organic carbon （SOA）, black carbon （BC） aerosols, and tropospheric 03 for the years 1950 and 2000 are obtained a priori by coupled chemistry-aerosol-GCM simulations, and then monthly concentrations are interpolated linearly between 1951 and 2000. The annual concentrations of GHGs are taken from the IPCC Third Assessment Report. BC aerosol is internally mixed with other aerosols. Model results indicate that the sinmlated climate change over 1951-2000 is sensitive to anthropogenic changes in atmospheric components. The predicted year 2000 global mean surface air temperature can differ by 0.8℃ with different forcings. Relative to the climate simulation without changes in GHGs, O3, and aerosols, anthropogenic forcings of SO4^2-, BC, BC＋SO4^2-, BC＋SO4^2- ＋POA, BC＋SO4^2- ＋POA＋SOA＋NO3^-, O3, and GHGs are predicted to change the surface air temperature averaged over 1971-2000 in eastern China, respectively, by -0.40℃, ＋0.62℃, ＋0.18℃, ＋0.15℃, -0.78℃, ＋0.43℃, and ＋0.85℃, and to change the precipitation, respectively, by -0.21, ＋0.07, -0.03, ＋0.02, -0.24, -0.08, and ＋0.10 mm d^-1. The authors conclude that all major aerosols are as important as GHGs in influencing climate change in eastern China, and tropospheric O3 also needs to be included in studies of regional climate change in China.

Selective catalytic methanation of CO in hydrogen-rich gases over Ni/ZrO_2 catalyst

Ni/ZrO2 catalysts were prepared by the incipient-wetness impregnation method and were investigated in activity and selectivity for the selective catalytic methanation of CO in hydrogen-rich gases with more than 20 vol% CO2. The result showed that Ni loadings significantly influenced the performance of Ni/ZrO2 catalyst. The 1.6 wt% Ni loading catalyst exhibited the highest catalytic activity among all the catalysts in the selective methanation of CO in hydrogen-rich gas. The outlet concentration of CO was less than 20 ppm with the hydrogen consumption below 7%, at a gas-hourly-space velocity as high as 10000 h-1 and a temperature range of 260 °C to 280 °C. The X-ray diffraction （XRD） and temperature programmed reduction （TPR） measurements showed that NiO was dispersed thoroughly on the surface of ZrO2 support if Ni loading was under 1.6 wt%. When Ni loading was increased to 3 wt% or above, the free bulk NiO species began to assemble, which was not favorable to increase the selectivity of the catalyst.

A Review of Research on Human Activity Induced Climate ChangeⅠ. Greenhouse Gases and Aerosols

Extensive research on the sources and sinks of greenhouse gases, carbon cycle modeling, and the characterization of atmospheric aerosols has been carried out in China during the last 10 years or so. This paper presents the major achievements in the fields of emissions of greenhouse gases from agricultural lands, carbon cycle modeling, the characterization of Asian mineral dust, source identification of the precursors of the tropospheric ozone, and observations of the concentrations of atmospheric organic compounds. Special, more detailed Information on the emissions of methane from rice fields and the physical and chemical characteristics of mineral aerosols are presented.

Effect of CO_2 on explosion limits of flammable gases in goafs

In order to reduce the number of accidents due to explosions of flammable gases in the goaf of coalmines,the conditions for explosion of flammable gases and their explosion limits,affected to a considerable extent by CO2,are explored.With the use of our experimental equipment suitable for the study of explosion of polybasic explosive gas mixtures,we investigated the effect of CH4/H2=10/1 and CH4/C2H4=10/1 gases mixed with CO2 on their explosion limits.The results indicate that after adding CO2,the explosion limit of the CH4/H2(or C2H4) =10/1 gas mixtures decreased markedly with increasing amounts of CO2.When the amount of CO2 exceeded 25%,the CH4/C2H4=10/1 flammable gas mixture did not lead to explosions.Similar results were obtained when the amount of CO2 exceeded 23% in the CH4/H2=10/1 flammable gas mixture.We also compared the explosion limits and the explosion suppression effect of N2 or CO2 on the explosion limits of the CH4+CO and CH4+C2H4 dual explosive gas mixtures.Along with the increases in the amounts of CO2 or N2,the area of the explosion limits of gas mixtures decreased.Under the same conditions,the explosion suppression effect of CO2 was greater than that of N2.CO2 has clearly the better suppression effect on the explosion of flammable gases in goafs.

A quantitative comparison and analysis on the assessment indicators of greenhouse gases emission

Anthropogenic greenhouse gases （GHG） emission and related global warming issues have been the focus of international communities for some time. The international communities have reached a consensus to reduce anthropogenic GHG emissions and restrain global warming. The quantitative assessment of anthropogenic GHG emissions is the scientific basis to find out the status of global GHG emission, identify the commitments of each country, and arrange the international efforts of GHG emission reduction. Currently the main assessment indicators for GHG emission include national indicator, per capita indicator, per GDP indicator, and international trade indicator etc. The introduction to the above indi- cators is put forward and their merits and demerits are analyzed. Based on the GHG emission data from the World Resource Institute （WRI）, the US Energy Information Administration （EIA）, and the Carbon Dioxide Information Analysis Center （CDIAC）, the results of each indictor are calculated for the world, for the eight G8 industrialized countries （USA, UK, Canada, Japan, Germany, France, Italy and Russia）, and the five major developing countries including China, Brazil, India, South Africa and Mexico. The paper points out that all these indicators have some limitations. The Indicator of Industrialized Accumulative Emission per Capita （IAEC） is put forward as the equitable indicator to evaluate the industrialized historical accumulative emission per capita of every country. IAEC indicator can reflect the economic achievement of GHG emission enjoyed by the current generations in every country and their commitments. The analysis of IAEC indicates that the historical accumulative emission per capita in indus- trialized countries such as UK and USA were typically higher than those of the world average and the developing countries. Emission indicator per capita per GDP, consumptive emission indicator and survival emission indicator are also put forward and discussed in the paper.

All-silica zeolites screening for capture of toxic gases from molecular simulation

The exhaust gases, including SO_2,NH_3, H_2S, NO_2, NO, and CO, are principal air pollutants due to their severe harms to the ecological environment.Zeolites have been considered as good absorbent candidates to capture the six exhaust gases.In this work, we performed grand canonical ensemble Monte Carlo(GCMC) simulations to examine the capability of 95 kinds of all-silica zeolites in the removal of the six toxic gases, and to predict the adsorption isotherms of the six gases on all the zeolites.The simulation results showed that, H_2S, NO, NO_2, CO and NH_3 are well-captured by zeolite structures with accessible surface area of 1600–1800 m^2·g^(-1) and pore diameter of 0.6–0.7 nm, such as AFY and PAU, while SO_2 is well-adsorbed by zeolites containing larger accessible surface area(1700–2700 m^2·g^(-1)) and pore diameter(0.7–1.4 nm) at room temperature and an atmospheric pressure.However, at saturated adsorption, zeolites RWY, IRR, JSR, TSC, and ITT are found to exhibit better abilities to capture these gases.Our study provides useful computational insights in choosing and designing zeolite structures with high performance to remove toxic gases for air purification, thereby facilitating the development and application of exhaust gas-processing technology in green industry.

Timing of granite pegmatite-type high-purity quartz deposit in the Eastern Qinling,China:constraints from in-situ LA-ICP-MS trace analyses of quartz and monazite U–Pb dating

Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,and the major minerals are quartz(39.8%),K-feldspar(18.8%),albite(36.3%),muscovite(3.4%),and garnet(1.1%).Monazite U–Pb isotopic dating indicates that the No.5 pegmatite from the Eastern Qinling was emplaced at ca.420.2±2.2 Ma,which confirms that highpurity quartz mineralization probably formed during the Early Devonian.In-situ laser ablation inductively coupled plasma mass spectrometry analysis of quartz show that quartz samples from Eastern Qinling have total trace element concentrations(Al,Ti,Sc,Li,B,Cr,Mn,and Fe)ranging from 23.2 to 52.8 ppm,slightly higher than the quartz(impurity element content from 13.4 to 25.9 ppm)of the Spruce Pine high-purity quartz deposit in western North Carolina.The No.5 pegmatite of Eastern Qinling could be defined as one high-purity quartz deposit of China.

Explosion limits for combustible gases

Combustible gases in coal mines are composed of methane, hydrogen, some multi-carbon alkane gases and other gases. Based on a numerical calculation, the explosion limits of combustible gases were studied, showing that these limits are related to the concentrations of different components in the mixture. With an increase of C4H10 and C6H14, the Lower ExplosionLimit （LEL） and Upper Explosion-Limit （UEL） of a combustible gas mixture will decrease clearly. For every 0.1% increase in C4H10 and C6H14, the LEL decreases by about 0.19% and the UEL by about 0.3%. The results also prove that, by increasing the amount of H2, the UEL of a combustible gas mixture will increase considerably. If the level of HE increases by 0.1%, the UEL will increase by about 0.3%. However, H2 has only a small effect on the LEL of the combustible gas mixture. Our study provides a theoretical foundation for judging the explosion risk of an explosive gas mixture in mines.

Kinetic Modeling the Formation of Low-mature Gases and Analysis of the Possibility to Be Accumulated

At present, shallow gases have received much attention due to low cost in exploration and production. Low-mature gases, as one significant origin to shallow gas, turns to be an important research topic. The present understanding of low-mature gases is confined within some geological cases, and few laboratory studies have been reported. Therefore, the potential and characters of low- mature gases are not clear up to now. Here, two premature samples （one coal and the other shale） were pyrolyzed in a gold confined system. The gaseous components including hydrocarbon gases and non-hydrocarbon gases were analyzed. Based on kinetic modeling, the formation of low-mature gases was modeled. The results showed that during low mature stage, about 178 mL/gTOC gas was generated from the shale and 100 mL/gTOC from the coal. Two third to three fourth of the generated gases are non-hydrocarbon gases such as H2S and CO2. The total yields of C1-5 for the two samples are almost the same, 30-40 mL/gTOC, but individual gaseous hydrocarbon is different. The shale has much lower C1 but higher C2-5, whereas the coal has higher C1 but lower C2-5. Hydrocarbon gases formed during low-mature stage are very wet. The stable carbon isotope ratios of methane range from -40‰ to -50‰ （PDB）, in good consistence with empiric criterion for low-mature gases summed up by the previous researchers. The generation characters suggest that the low-mature gases could be accumulated to form an economic gas reservoir, but most of them occur only as associated gases.

Preparing high-purity iron by direct reduction?smelting separation of ultra-high-grade iron concentrate

A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced time of 5 h,and CaO content of 2.5wt%,a DRI with a metallization rate of 96.5%was obtained through coal-based direct reduction of ultra-high-grade iron concentrate.Then,an HPI with a Fe purity of 99.95%and C,Si,Mn,and P contents as low as 0.0008wt%,0.0006wt%,0.0014wt%,and 0.0015wt%,respectively,was prepared by smelting separation of the DRI using a smelting temperature of 1625°C,smelting time of 45 min,and CaO content of 9.3wt%.The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard.An HPI with a Fe purity of 99.98wt%can be produced through the direct reduction?smelting separation of ultra-high-grade iron concentrate at relatively low cost.The proposed process shows a promising prospect for application in the future.

Experiment study of optimization on prediction index gases of coal spontaneous combustion

The coal of Anyuan Mine has the characteristic of easy spontaneous combustion. Conventional method is difficult to predict it. Coal samples from this mine were tested in laboratory. The data obtained from laboratory determination were initialized for the value which was defined as "K". The ratio of each index gas and value of "K", and the ratio of combination index gases and value of "K", were analyzed simultaneously. The research results show that for this coal mine, if there is carbon monoxide in the gas sample, the phenomenon of oxidation and temperature rising for coal exists in this mine; if there is C_2H_4 in the gas sample, the temperature of coal perhaps exceeds 130 °C. If the coal temperature is between 35 °C and 130 °C, prediction and forecast for coal spontaneous combustion depend on the value of Φ(CO)/K mainly; if the temperature of coal is between 130 °C and 300 °C, prediction and forecast for coal spontaneous combustion depend on the value of Φ(C_2H_6)/Φ(C_2H_2) and Φ(C_2H_6)/K. The research results provide experimental basis for the prediction of coal spontaneous combustion in Anyuan coal mine, and have better guidance on safe production of this coal mine.

Computer simulation of the air flow distribution in goaf regarding the use of inert gases and chemical agents

This paper presents the use of a computer method of the ventilation process simulation for the analysis of the flow distribution of air and gases in the area of wall mining work and the adjacent goaf.In workings and goaf,the complex issue of the formation of a gaseous atmosphere under variable ventilation conditions and an existing fire hazard level,with the possibility of feeding goaf with an additional carbon dioxide flux as the inertizing agent is considered.Some examples of the simulation of feeding goaf with carbon dioxide illustrating the different patterns of the distribution of the goaf atmosphere gases concentration,said distribution patterns being gas supply place dependent,have been presented.In addition,the impact of the additional sealing of goaf on the distribution level of the concentration of gases,the said sealing made from the wall side with chemical agents has also been considered.The capabilities of the VentGoaf computer simulation program,being the basis for our calculations,enable consideration of the use of the inert gases supplied to the goaf depending on: the location of the gas feeding the pipe outlet,tightness of the fire field,fire centre location,and spatial situation of the mined wall.It has been found that fire prevention elements,such as chemical sealing agents,are of great impact on the effectiveness of fire prevention.

Topological phase transitions driven by next-nearest-neighbor hopping in noncentrosymmetric cold Fermi gases

We investigate the topological phase marked by the Thouless–Kohmoto–Nightingale–Nijs（TKNN） number and the phase transitions driven by the next nearest neighbor（NNN） hopping in noncentrosymmetric cold Fermi gases, both spinsinglet pairing and spin-triplet pairing are considered. There exists a critical t＇c for the NNN hopping, at which the quantum phase transition occurs, and the system changes from an Abelian（non-Abelian） phase to a non-Abelian（Abelian） one. By numerically diagonalizing the Hamiltonian in the real space, the energy spectra with edge states for different topological phases and the Majorana zero modes are discussed. Although the spin-triplet pairing does not contribute to the gap closing and the phase diagram, it induces gapless states in the presence of a magnetic field, and the TKNN number in this region is still zero.

A UNIFIED VISCOSITY MODEL FOR HYDROCARBON GASES AND LIQUIDS BASED ON TRANSPoSED PATEL-TEJA EQUATION OF STATE

A unified model for predicting high-pressure viscosities of both hydrocarbon gases and liquids was developed,which is based on the similarity between P-V-T and T-μ-P plots and Patel-Teja equation of state.The characteristic feature of this new model is its capability of describing the continuous variation of fluid viscosity throughciritical region.The pure component parameters are generalized into functions of reduced temperature,reducedpressure,acentric factor and molecular weight.The overall average absolute deviation of predicted viscositiesof 20 pure hydrocarbon fluids(a total of 1941 data points)is 8.7%.