Low Stress TSV Arrays for High-Density Interconnection

In three-dimensional(3D)stacking,the thermal stress of through-silicon via(TSV)has a significant influence on chip performance and reliability,and this problem is exacerbated in high-density TSV arrays.In this study,a novel hollow tungsten TSV(W-TSV)is presented and developed.The hollow structure provides space for the release of thermal stress.Simulation results showed that the hollow W-TSV structure can release 60.3%of thermal stress within the top 2 lm from the surface,and thermal stress can be decreased to less than 20 MPa in the radial area of 3 lm.The ultra-high-density(1600 TSV∙mm2)TSV array with a size of 640×512,a pitch of 25 lm,and an aspect ratio of 20.3 was fabricated,and the test results demonstrated that the proposed TSV has excellent electrical and reliability performances.The average resistance of the TSV was 1.21 X.The leakage current was 643 pA and the breakdown voltage was greater than 100 V.The resistance change is less than 2%after 100 temperature cycles from40 to 125℃.Raman spectroscopy showed that the maximum stress on the wafer surface caused by the hollow W-TSV was 31.02 MPa,which means that there was no keep-out zone(KOZ)caused by the TSV array.These results indicate that this structure has great potential for applications in large-array photodetectors and 3D integrated circuits.

Kinetic-Thermodynamic Promotion Engineering toward High-Density Hierarchical and Zn-Doping Activity-Enhancing ZnNiO@CF for High-Capacity Desalination

Despite the promising potential of transition metal oxides(TMOs)as capacitive deionization(CDI)electrodes,the actual capacity of TMOs electrodes for sodium storage is significantly lower than the theoretical capacity,posing a major obstacle.Herein,we prepared the kinetically favorable Zn_(x)Ni_(1−x)O electrode in situ growth on carbon felt(Zn_(x)Ni_(1−x)O@CF)through constraining the rate of OH^(−)generation in the hydrothermal method.Zn_(x)Ni_(1−x)O@CF exhibited a high-density hierarchical nanosheet structure with three-dimensional open pores,benefitting the ion transport/electron transfer.And tuning the moderate amount of redox-inert Zn-doping can enhance surface electroactive sites,actual activity of redox-active Ni species,and lower adsorption energy,promoting the adsorption kinetic and thermodynamic of the Zn_(0.2)Ni_(0.8)O@CF.Benefitting from the kinetic-thermodynamic facilitation mechanism,Zn_(0.2)Ni_(0.8)O@CF achieved ultrahigh desalination capacity(128.9 mgNaCl g^(-1)),ultra-low energy consumption(0.164 kW h kgNaCl^(-1)),high salt removal rate(1.21 mgNaCl g^(-1) min^(-1)),and good cyclability.The thermodynamic facilitation and Na^(+)intercalation mechanism of Zn_(0.2)Ni_(0.8)O@CF are identified by the density functional theory calculations and electrochemical quartz crystal microbalance with dissipation monitoring,respectively.This research provides new insights into controlling electrochemically favorable morphology and demonstrates that Zn-doping,which is redox-inert,is essential for enhancing the electrochemical performance of CDI electrodes.

Silicon-based optoelectronic heterogeneous integration for optical interconnection

The performance of optical interconnection has improved dramatically in recent years.Silicon-based optoelectronic heterogeneous integration is the key enabler to achieve high performance optical interconnection,which not only provides the optical gain which is absent from native Si substrates and enables complete photonic functionalities on chip,but also improves the system performance through advanced heterogeneous integrated packaging.This paper reviews recent progress of silicon-based optoelectronic heterogeneous integration in high performance optical interconnection.The research status,development trend and application of ultra-low loss optical waveguides,high-speed detectors,high-speed modulators,lasers and 2D,2.5D,3D and monolithic integration are focused on.

Serum cystatin C,monocyte/high-density lipoprotein-C ratio,and uric acid for the diagnosis of coronary heart disease and heart failure

BACKGROUND Coronary heart disease(CHD)and heart failure(HF)are the major causes of morbidity and mortality worldwide.Early and accurate diagnoses of CHD and HF are essential for optimal management and prognosis.However,conventional diagnostic methods such as electrocardiography,echocardiography,and cardiac biomarkers have certain limitations,such as low sensitivity,specificity,availability,and cost-effectiveness.Therefore,there is a need for simple,noninvasive,and reliable biomarkers to diagnose CHD and HF.AIM To investigate serum cystatin C(Cys-C),monocyte/high-density lipoprotein cholesterol ratio(MHR),and uric acid(UA)diagnostic values for CHD and HF.METHODS We enrolled 80 patients with suspected CHD or HF who were admitted to our hospital between July 2022 and July 2023.The patients were divided into CHD(n=20),HF(n=20),CHD+HF(n=20),and control groups(n=20).The serum levels of Cys-C,MHR,and UA were measured using immunonephelometry and an enzymatic method,respectively,and the diagnostic values for CHD and HF were evaluated using receiver operating characteristic(ROC)curve analysis.RESULTS Serum levels of Cys-C,MHR,and UA were significantly higher in the CHD,HF,and CHD+HF groups than those in the control group.The serum levels of Cys-C,MHR,and UA were significantly higher in the CHD+HF group than those in the CHD or HF group.The ROC curve analysis showed that serum Cys-C,MHR,and UA had good diagnostic performance for CHD and HF,with areas under the curve ranging from 0.78 to 0.93.The optimal cutoff values of serum Cys-C,MHR,and UA for diagnosing CHD,HF,and CHD+HF were 1.2 mg/L,0.9×10^(9),and 389μmol/L;1.4 mg/L,1.0×10^(9),and 449μmol/L;and 1.6 mg/L,1.1×10^(9),and 508μmol/L,respectively.CONCLUSION Serum Cys-C,MHR,and UA are useful biomarkers for diagnosing CHD and HF,and CHD+HF.These can provide information for decision-making and risk stratification in patients with CHD and HF.

Tandem hydroalkylation and deoxygenation of lignin-derived phenolics to synthesize high-density fuels

Lignin is the most abundant naturally phenolic biomass,and the synthesis of high-performance renewable fuel from lignin has attracted significant attention.We propose the efficient synthesis of high-density fuels using simulated lignin cracked oil in tandem with hydroalkylation and deoxygenation reactions.First,we investigated the reaction pathway for the hydroalkylation of phenol,which competes with the hydrodeoxygenation form cyclohexane.And then,we investigated the effects of metal catalyst types,the loading amount of metallic,acid dosage,and reactant ratio on the reaction results.The phenol hydroalkylation and hydrodeoxygenation were balanced when 180℃ and 5 MPa H_(2)with the alkanes yield of 95%.By extending the substrate to other lignin-derived phenolics and simulated lignin cracked oil,we obtained the polycyclic alkane fuel with high density of 0.918 g·ml^(-1)and calorific value of41.2 MJ·L^(-1).Besides,the fuel has good low-temperature properties(viscosity of 9.3 mm^(2)·s^(-1)at 20℃ and freezing point below-55℃),which is expected to be used as jet fuel.This work provides a promising way for the easy and green production of high-density fuel directly from real lignin oil.

Efficient PbS quantum dots tandem solar cells through compatible interconnection layer

Lead sulfide quantum dots(PbS QDs) hold unique characteristics, including bandgap tunability, solutionprocessability etc., which make them highly applicable in tandem solar cells(TSCs). In all QD TSCs, its efficiency lags much behind to their single junction counterparts due to the deficient interconnection layer(ICL) and defective subcells. To improve TSCs performance, we developed three kinds of ICL structures based on 1.34 and 0.96 e V PbS QDs subcells. The control, 1,2-ethanedithiol capped PbS QDs(PbS-EDT)/Au/tin dioxide(SnO_(2))/zinc oxide(Zn O), utilized SnO_(2) layer to obtain high surface compactness.However, its energy level mismatch causes incomplete recombination. Bypassing it, the second ICL(PbS-EDT/Au/Zn O) removed SnO_(2) and boosted the power conversion efficiency(PCE) from 5.75% to 8.69%. In the third ICL(PbS-EDT/poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine](PTAA)/Au/Zn O), a thin layer of PTAA can effectively fill fissures on the surface of PbS-EDT and also protect the front cells from solvent penetration. This TSC obtained a PCE of 9.49% with an open circuit voltage of 0.91 V, a short circuit current density of 15.47 m A/cm~2, and a fill factor of 67.7%. To the best of our knowledge, this was the highest PCE achieved by all PbS QD TSCs reported to date. These TSCs maintained stable performance for a long working time under ambient conditions.

Monocyte to high-density lipoprotein cholesterol ratio as a predictor of the activity of thyroid-associated ophthalmopathy

AIM:To evaluate the relationship between monocyte to high-density lipoprotein cholesterol ratio(MHR)and the disease activity of thyroid-associated ophthalmopathy(TAO).METHODS:A total of 87 patients were classified into two groups based on clinical activity score(CAS)scoring criteria:high CAS group(n=62,the CAS score was≥3);low CAS group(n=25,the CAS score was<3).In addition,a group of healthy people(n=114)were included to compared the MHR.Proptosis,MHR,average signal intensity ratio(SIR),average lacrimal gland(LG)-SIR,average extraocular muscles(EOM)area from 87 patients with TAO were calculated in magnetic resonance imaging(MRI),and compared between these two groups.Correlation testing was utilized to evaluate the association of parameters among the clinical variables.RESULTS:Patients in high CAS group had a higher proptosis(P=0.041)and MHR(P=0.048).Compared to the healthy group,the MHR in the TAO group was higher(P=0.001).Correlation testing declared that CAS score was strongly associated with proptosis and average SIR,and MHR was positively associated with CAS score,average SIR,and average LG-SIR.The area under the receiver operating characteristic curve(AUC)of MHR was 0.6755.CONCLUSION:MHR,a novel inflammatory biomarker,has a significant association with CAS score and MRI imaging(average SIR and LG-SIR)and it can be a new promising predictor during the active phase of TAO.

A model for fast electron-driven high-density plasma in the double-cone ignition scheme

A model for fast electron-driven high-density plasma is proposed to describe the effect of injected fast electrons on the temperature and inner pressure of the plasma in the fast heating process of the double-cone ignition(DCI)scheme.Due to the collision of the two low-density plasmas,the density and volume of the high-density plasma vary.Therefore,the ignition temperature and energy requirement of the high-density plasma vary at different moments,and the required energy for hot electrons to heat the plasma also changes.In practical experiments,the energy input of hot electrons needs to be considered.To reduce the energy input of hot electrons,the optimal moment and the shortest time for injecting hot electrons with minimum energy are analyzed.In this paper,it is proposed to inject hot electrons for a short time to heat the high-density plasma to a relatively high temperature.Then,the alpha particles with the high heating rate and PdV work heat the plasma to the ignition temperature,further reducing the energy required to inject hot electrons.The study of the injection time of fast electrons can reduce the energy requirement of fast electrons for the high-density plasma and increase the probability of successful ignition of the high-density plasma.

Predictive value of intracranial high-density areas in neurological function

BACKGROUND Intracranial high-density areas(HDAs)have attracted considerable attention for predicting clinical outcomes;however,whether HDAs predict worse neurological function and mental health remains controversial and unclear,which requires further investigation.In this prospective study,96 patients with acute ischemic stroke(AIS)who accepted endovascular mechanical thrombectomy(EMT)were included.The enrolled patients underwent cranial computed tomography(CT)examination within 24 hours after EMT.Clinical data in terms of National Institutes of Health Stroke Scale(NIHSS),the 3-month modified Rankin Scale(mRS),self-rating depression scale(SDS),and self-rating anxiety scale(SAS)scores were collected and compared between patients with HDAs and non-HDAs and between patients with good and poor clinical prognosis.Compared to patients without HDAs,patients with HDAs presented severe neurological deficits(admission NIHSS score:18±3 vs 19±4),were more likely to have post-stroke disabilities(mRS<3:35%vs 62%),and suffered more severe depression(SDS score:58±16 vs 64±13)and anxiety disorder(SAS score:52±8 vs 59±10).Compared to patients with a good prognosis,patients with a poor prognosis presented severe neurological deficits(admission NIHSS score:17±4 vs 20±3),were more likely to have HDAs on CT images(64%vs 33%),and suffered more severe depression(SDS score:55±19 vs 65±11)and anxiety(SAS score:50±8 vs 58±12).Multivariate analysis revealed that HDAs were independent nega-tive prognostic factors.CONCLUSION In conclusion,HDAs on CT images predicted poor prognosis and severe depressive and anxiety symptoms in patients with AIS who underwent EMT.

Research on Scheduling Strategy of Flexible Interconnection Distribution Network Considering Distributed Photovoltaic and Hydrogen Energy Storage

Distributed photovoltaic(PV)is one of the important power sources for building a new power system with new energy as the main body.The rapid development of distributed PV has brought new challenges to the operation of distribution networks.In order to improve the absorption ability of large-scale distributed PV access to the distribution network,the AC/DC hybrid distribution network is constructed based on flexible interconnection technology,and a coordinated scheduling strategy model of hydrogen energy storage(HS)and distributed PV is established.Firstly,the mathematical model of distributed PV and HS system is established,and a comprehensive energy storage system combining seasonal hydrogen energy storage(SHS)and battery(BT)is proposed.Then,a flexible interconnected distribution network scheduling optimization model is established to minimize the total active power loss,voltage deviation and system operating cost.Finally,simulation analysis is carried out on the improved IEEE33 node,the NSGA-II algorithm is used to solve specific examples,and the optimal scheduling results of the comprehensive economy and power quality of the distribution network are obtained.Compared with the method that does not consider HS and flexible interconnection technology,the network loss and voltage deviation of this method are lower,and the total system cost can be reduced by 3.55%,which verifies the effectiveness of the proposed method.

High-density Ir single sites from rapid ligand transformation for efficient water electrolysis

The development of high-performance oxygen evolution reaction catalysts with low iridium content is the key to the scale-up of proton exchange membrane water electrolyzer(PEMWE)for green hydrogen production.Single-site electrocatalysts with maximized atomic efficiency are held as promising candidates but still suffer from inadequate activity and stability in practical electrolyzer due to the low site density.Here,we proposed a NaNO_(3)-assistant thermal decomposition strategy for the preparation of high-density Ir single sites on MnO_(2)substrate(NaNO_(3)-H-Ir-MnO_(2)).Direct spectroscopic evidence suggests the inclusion of NaNO_(3) accelerates the transformation of Ir-Cl to Ir-O coordination,thus generating uniform dispersed high-density Ir single sites in the products.The optimized H-Ir-MnO_(2)demonstrates not only high intrinsic activity in a three-electrode set-up but also boosted performance in scalable PEMWE,requiring a cell voltage of only 1.74 V to attain a high current density of 2 A cm^(-2) at a low Ir loading of 0.18 mgIr cm^(-2).This work offers a new insight for enhancing the industrial practicality of Ir-based single site catalysts.

Correlation of Helicobacter pylori infection with high-density lipoprotein cholesterol levels and pulse wave conduction velocity

Background:Helicobacter pylori(HP)is associated with several gastrointestinal diseases,including peptic ulcer diseases and gastric cancer,and non-gastrointestinal diseases such as hypertension and Alzheimer's disease.However,the relationship between HP and lipid metabolism and atherosclerosis remains unclear.This study aims to investigate the association between H.pylori infection and high-density lipoprotein cholesterol levels and pulse wave conduction velocity.Methods:This is a report of a cross-sectional study that collected data from 2,827 participants.The data collected included results of life questionnaires,laboratory tests,13C-urea breath test(13C-UBT),and pulse wave conduction velocity test.Based on the results of the 13C-UBT test,the subjects were divided into two groups:the HP-uninfected group(HP−)and the HP-infected group(HP+).The study compared the differences in HDL-C levels and brachial-ankle pulse wave velocity(baPWV)between the two groups.One-way regression analysis was used to identify potential factors affecting HDL-C levels in the study population.Multiple regression equations were presented to analyze whether HP infection was an independent risk factor for abnormal HDL-C metabolism in the population.Results:Univariate analysis demonstrated that high-density lipoprotein cholesterol(HDL-C)levels were significantly lower in the HP+group compared to the HP−group,with a mean difference ofβ=−18.1 mg/dl(95%CI:−19.3 to−17.0,P<0.001).After adjusting for all variables,the HDL-C levels remained lower in the HP+group compared to the HP-group,with a mean difference ofβ=−17.4 mg/dl(95%CI:−18.2 to−16.7,P<0.001).These findings suggest that H.pylori infection is independently associated with abnormal HDL-C metabolism.Additionally,brachial-ankle pulse wave velocity(baPWV)was higher in the HP+group than in the HP−group on both sides.On the right side,the baPWV was 1,713.4±231.4 cm/s in the HP+group compared to 1,542.8±237.5 cm/s in the HP−group(t=−18.30,P<0.001).On the left side,the baPWV was 1,743.7±238.8 cm/s in the HP+group compared to 1,562.8±256.3 cm/s in the HP−group(t=−18.23,P<0.001).These results indicate a significant association between H.pylori infection and increased arterial stiffness,as measured by baPWV.Conclusion:Helicobacter pylori infection is associated with a decrease in high-density lipoprotein cholesterol levels and an increase in pulse wave conduction velocity.

Influence of Interconnection Configuration on Thermal Dissipation of ULSI Interconnect Systems

The effects of adjacent metal layers and space between metal lines on the temperature rise of multilevel ULSI interconnect lines are investigated by modeling a three-layer interconnect. The heat dissipation of various metallization technologies concerning the metal and low-k dielectric employment is simulated in detail. The Joule heat generated in the interconnect is transferred mainly through the metal lines in each metal layer and through the path with the smallest thermal resistance in each Ield layer. The temperature rises of Al metallization are approximately pAl/pCu times higher than those of Cu metallization under the same conditions. In addition, a thermal problem in 0.13μm globe interconnects is studied for the worst case, in which there are no metal lines in the lower interconnect layers. Several types of dummy metal heat sinks are investigated and compared with regard to thermal efficiency,influence on parasitic capacitance,and optimal application by combined thermal and electrical simula- tion.

Contrast between 2D inversion and 3D inversion based on 2D high-density resistivity data

The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.

DESIGN AND IMPLEMENTATION OF A GIGABIT PER SECOND OPTICAL INTERCONNECTION DATA LINK

The interconnection network is one of the key elements of distributed computing systems such as MPP (massively parallel processing) or NOWs (network of workstations).In this paper,a high speed optical interconnection data link which has been designed and implemented is presented.Using TDM (time division multiplexing),virtual parallel synchronous data transmission between the PCI buses of two computers has been achieved.The maximum data rate of the link is 1 250 Mbit/s,and the communication distance of link is more than 600 m using multi mode fibers.The design method of the high frequency electrical signals on the network interface card has been analyzed,and the efficient data transmission bandwidth of the link in different transmission modes has been tested and analyzed.

Dynamic load balancing based on restricted multicast tree in triplet-based hierarchical interconnection network

To solve the load balancing problem in a triplet-based hierarchical interconnection network（THIN） system, a dynamic load balancing （DLB）algorithm--THINDLBA, which adopts multicast tree （MT）technology to improve the efficiency of interchanging load information, is presented. To support the algorithm, a complete set of DLB messages and a schema of maintaining DLB information in each processing node are designed. The load migration request messages from the heavily loaded node （HLN）are spread along an MT whose root is the HLN. And the lightly loaded nodes（LLNs） covered by the MT are the candidate destinations of load migration; the load information interchanged between the LLNs and the HLN can be transmitted along the MT. So the HLN can migrate excess loads out as many as possible during a one time execution of the THINDLBA, and its load state can be improved as quickly as possible. To avoid wrongly transmitted or redundant DLB messages due to MT overlapping, the MT construction is restricted in the design of the THINDLBA. Through experiments, the effectiveness of four DLB algorithms are compared, and the results show that the THINDLBA can effectively decrease the time costs of THIN systems in dealing with large scale computeintensive tasks more than others.

Accurate Interconnection Length and Routing Channel Width Estimates for FPGAs

We study the problem of the prediction of interconnection dimensions for FPGAs, including estimating interconnection length and channel width. Experimental results show that our estimates are more accurate than those of existing methods.

Development of Network Interconnection in China

This paper introduces the current situation of China power industry and interconnection, the necessity to develop interconnection, the principle of nationwide interconnection and the key technologies to be studiedinclude HVDC and FACTS. The paper also discusses thefeasibility of 750 kV to be used in the northwest.regionand to speed up research and development of nighervoltage level in other regions of China, as well as scl-ence and technical innovation for transmission and dis-tribution projects.

USING WAVELENGTH ROUTING IN THE OPTICAL INTERCONNECTION COMPUTER NETWORK

The wavelength routing technology applied to computer interconnection networks is introduced in this paper.By analyzing the relation between wavelength and network routing,we describe a concept of wavelength used as network IP address,and propose a wavelength routing topology to extend the scale of a network and realize the scalability of the network.Moreover,a twin wavelength ring network that is being developed in our laboratory to implement and test the function of wavelength routing is presented,and the main units of the twin wavelength ring network are presented also.According to the testing results based on a single wavelength ring network,it proves that the optical interconnection technology is a perfect technology to provide enough communication bandwidth for computer network.

High-density lipoprotein and atherosclerosis: Roles of lipid transporters

Various previous studies have found a negative cor-relation between the risk of cardiovascular events and serum high-density lipoprotein(HDL) cholesterol levels. The reverse cholesterol transport, a pathway of choles-terol from peripheral tissue to liver which has several potent antiatherogenic properties. For instance, the particles of HDL mediate to transport cholesterol from cells in arterial tissues, particularly from atherosclerotic plaques, to the liver. Both ATP-binding cassette trans-porters(ABC) A1 and ABCG1 are membrane cholesterol transporters and have been implicated in mediating cholesterol effluxes from cells in the presence of HDL and apolipoprotein A-I, a major protein constituent of HDL. Previous studies demonstrated that ABCA1 and ABCG1 or the interaction between ABCA1 and ABCG1 exerted antiatherosclerotic effects. As a therapeutic approach for increasing HDL cholesterol levels, much focus has been placed on increasing HDL cholesterol levels as well as enhancing HDL biochemical functions. HDL therapies that use injections of reconstituted HDL, apoA-I mimetics, or full-length apoA-I have shown dramatic effectiveness. In particular, a novel apoA-I mi-metic peptide, Fukuoka University ApoA-I Mimetic Pep-tide, effectively removes cholesterol via specific ABCA1 and other transporters, such as ABCG1, and has an an-tiatherosclerotic effect by enhancing the biological func-tions of HDL without changing circulating HDL choles-terol levels. Thus, HDL-targeting therapy has significant atheroprotective potential, as it uses lipid transporter-targeting agents, and may prove to be a therapeutic tool for atherosclerotic cardiovascular diseases.