Multifunctional HDPE/Cu biocidal nanocomposites for MEX additive manufactured parts: Perspectives for the defense industry

In this study, we investigated the performance improvement caused by the addition of copper(Cu)nanoparticles to high-density polyethylene(HDPE) matrix material. Composite materials, with filler percentages of 0.0, 2.0, 4.0, 6.0, 8.0, and 10.0 wt% were synthesized through the material extrusion(MEX)3D printing technique. The synthesized nanocomposite filaments were utilized for the manufacturing of specimens suitable for the experimental procedure that followed. Hence, we were able to systematically investigate their tensile, flexural, impact, and microhardness properties through various mechanical tests that were conducted according to the corresponding standards. Broadband Dielectric Spectroscopy was used to investigate the electrical/dielectric properties of the composites. Moreover, by employing means of Raman spectroscopy and thermogravimetric analysis(TGA) we were also able to further investigate their vibrational, structural, and thermal properties. Concomitantly, means of scanning electron microscopy(SEM), as well as atomic force microscopy(AFM), were used for the examination of the morphological and structural characteristics of the synthesized specimens, while energy-dispersive Xray spectroscopy(EDS) was also performed in order to receive a more detailed picture on the structural characteristics of the various synthesized composites. The corresponding nanomaterials were also assessed for their antibacterial properties regarding Staphylococcus aureus(S. aureus) and Escherichia coli(E. coli) with the assistance of a method named screening agar well diffusion. The results showed that the mechanical properties of HDPE benefited from the utilization of Cu as a filler, as they showed a notable improvement. The specimen of HDPE/Cu 4.0 wt% was the one that presented the highest levels of reinforcement in four out of the seven tested mechanical properties(for example, it exhibited a 36.7%improvement in the flexural strength, compared to the pure matrix). At the same time, the nanocomposites were efficient against the S. aureus bacterium and less efficient against the E. coli bacterium.The use of such multi-functional, robust nanocomposites in MEX 3D printing is positively impacting applications in various fields, most notably in the defense and security sectors. The latter becomes increasingly important if one takes into account that most firearms encompass various polymeric parts that require robustness and improved mechanical properties, while at the same time keeping the risk of spreading various infectious microorganisms at a bare minimum.

Infusing High-density Polyethylene with Graphene-Zinc Oxide to Produce Antibacterial Nanocomposites with Improved Properties

Nanocomposites of high-density polyethylene(HDPE)modified with 0.2 phr graphene-zinc oxide(GN-ZnO)exhibited optimal mechanical properties and thermal stability.Two other nano-materials—GN and nano-ZnO—were also used to compare them with GN-ZnO.increasing the content of GN-ZnO gradually enhanced the antibacterial and barrier properties,but the addition of 0.3 phr GN-ZnO led to agglomeration that caused defects in the nanocomposites.Herein,we investigated the antibacterial and barrier properties of HDPE nanocomposites infused with different nanoparticles(GN,ZnO,GN-ZnO)of varying concentrations.HDPE and the nanoparticles were meltblended together in a Haake-Buchler Rheomixer to produce a new environment-friendly nano-material with improved physical and chemical properties.The following characterizations were conducted:tensile test,thermogravimetric analysis,morphology,differential scanning calorimetry,X-ray diffraction,antibacterial test,and oxygen and water vapor permeation test.The results showed that the crystallinity of HDPE was affected with the addition of GN-ZnO,and the nanocomposites had effective antibacterial capacity,strong mechanical properties,high thermal stability,and excellent barrier performance.This type of HDPE nanocomposites reinforced with GN-ZnO would be attractive for packaging industries.

Medpor®Acts on Stem Cells Derived from Peripheral Blood

Porous polyethylene (PP or Medpor?) is an alloplastic material used worldwide for craniofacial reconstruction. Although several clinical studies are available, how this material alters osteoblast activity to promote bone formation is poorly understood. To study how PP can induce osteoblast differentiation in mesenchymal stem cells, the expression levels of bone related genes and mesenchymal stem cells marker were analyzed, using real time Reverse Transcription-Polymerase Chain Reaction. PP causes induction of osteoblast transcriptional factor RUNX2 and of the bone related genes osteocalcin (BGLAP) and alkaline phosphatase (ALPL). In contrast the expression of ENG was decreased in stem cells treated with PP respect to untreated cells, indicating the differentiation effect of this biomaterial on stem cells. The obtained results can be relevant to better understand the molecular mechanism of bone regeneration and as a model for comparing other materials with similar clinical effects.