期刊文献+
共找到335篇文章
< 1 2 17 >
每页显示 20 50 100
CMC/AlCit/GDL防灭火凝胶的流变性能及本构方程研究 被引量:1
1
作者 陈鹏燕 周春山 程熙宇 《应用化工》 CAS CSCD 北大核心 2023年第4期1010-1014,共5页
采用安东帕流变仪对CMC/AlCit/GDL防灭火凝胶交联体系进行时间扫描以及粘弹性测定,考察了各组分浓度对凝胶流变性能的影响,计算了不同时刻下流变模型的相关参数及其本构方程。结果表明,随着温度的升高,G′和G″均呈现出逐渐下降趋势;在... 采用安东帕流变仪对CMC/AlCit/GDL防灭火凝胶交联体系进行时间扫描以及粘弹性测定,考察了各组分浓度对凝胶流变性能的影响,计算了不同时刻下流变模型的相关参数及其本构方程。结果表明,随着温度的升高,G′和G″均呈现出逐渐下降趋势;在实验范围内,CMC浓度变化对体系粘度影响最大,AlCit次之,GDL影响最小;CMC/AlCit交联体系随着剪切速率的增大,其粘度急剧下降,属于屈服假塑性流体;此外,建立了表观剪切力-剪切速率之间关系的本构方程。 展开更多
关键词 CMC/AlCit/gdl凝胶 流变性能 浓度 本构方程
下载PDF
High-Energy Lithium-Ion Batteries:Recent Progress and a Promising Future in Applications 被引量:2
2
作者 Jingjing Xu Xingyun Cai +4 位作者 Songming Cai Yaxin Shao Chao Hu Shirong Lu Shujiang Ding 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2023年第5期60-85,共26页
It is of great significance to develop clean and new energy sources with high-efficient energy storage technologies,due to the excessive use of fossil energy that has caused severe environmental damage.There is great ... It is of great significance to develop clean and new energy sources with high-efficient energy storage technologies,due to the excessive use of fossil energy that has caused severe environmental damage.There is great interest in exploring advanced rechargeable lithium batteries with desirable energy and power capabilities for applications in portable electronics,smart grids,and electric vehicles.In practice,high-capacity and low-cost electrode materials play an important role in sustaining the progresses in lithium-ion batteries.This review aims at giving an account of recent advances on the emerging high-capacity electrode materials and summarizing key barriers and corresponding strategies for the practical viability of these electrode materials.Effective approaches to enhance energy density of lithium-ion batteries are to increase the capacity of electrode materials and the output operation voltage.On account of major bottlenecks of the power lithium-ion battery,authors come up with the concept of integrated battery systems,which will be a promising future for high-energy lithium-ion batteries to improve energy density and alleviate anxiety of electric vehicles. 展开更多
关键词 high-capacity electrode materials high-energy lithium-ion batteries high-voltage cathodes integrated battery systems organic cathode materials
下载PDF
Cross-satellite calibration of high-energy electron fluxes measured by FengYun-4A based on Arase observations
3
作者 XiaoYu Wang Xing Cao +5 位作者 Xin Ma XiaoXin Zhang AnQin Chen JunHu Dong BinBin Ni XianKang Dou 《Earth and Planetary Physics》 CAS CSCD 2023年第5期565-575,共11页
We use the High-energy Electron Experiments(HEP)instrument onboard Arase(ERG)to conduct an energy-dependent cross-satellite calibration of electron fluxes measured by the High Energy Particle Detector(HEPD)onboard Fen... We use the High-energy Electron Experiments(HEP)instrument onboard Arase(ERG)to conduct an energy-dependent cross-satellite calibration of electron fluxes measured by the High Energy Particle Detector(HEPD)onboard FengYun-4A(FY-4A)spanning from April 1,2017,to September 30,2019.By tracing the two-dimensional magnetic positions(L,magnetic local time[MLT])of FY-4A at each time,we compare the datasets of the conjugate electron fluxes over the range of 245–894 keV in 6 energy channels for the satellite pair within different sets of L×MLT.The variations in the electron fluxes observed by FY-4A generally agree with the Arase measurements,and the percentages of the ratios of electron flux conjunctions within a factor of 2 are larger than 50%.Compared with Arase,FY-4A systematically overestimates electron fluxes at all 6 energy channels,with the corresponding calibration factors ranging from 0.67 to 0.81.After the cross-satellite calibration,the electron flux conjunctions between FY-4A and Arase show better agreement,with much smaller normalized root mean square errors.Our results provide a valuable reference for the application of FY-4A high-energy electron datasets to in-depth investigations of the Earth’s radiation belt electron dynamics. 展开更多
关键词 cross-satellite calibration high-energy electron flux FengYun-4A Arase
下载PDF
以GDL90为核心的ADS-B系统组成及故障分析
4
作者 税远平 《中文科技期刊数据库(全文版)工程技术》 2023年第4期1-4,共4页
ADS-B系统在我国民航和通航得到广泛应用,是我国实现民航强国的重要科技手段,ADS-B技术的发展进一步提高了航空安全性,深刻影响了航空业的发展。GDL90收发机体积小、系统组成简单,是一种低成本、高精度、功能完善的ADS-B系统处理器,在... ADS-B系统在我国民航和通航得到广泛应用,是我国实现民航强国的重要科技手段,ADS-B技术的发展进一步提高了航空安全性,深刻影响了航空业的发展。GDL90收发机体积小、系统组成简单,是一种低成本、高精度、功能完善的ADS-B系统处理器,在我国各类航空器中广泛运用。本文论述以GDL90收发机为核心的ADS-B系统的组成、使用方式、故障分析流程以及常见故障的解决方法,并结合作者自身工作经验,阐述该系统日常使用中的注意事项和快速排故方法。 展开更多
关键词 ADS-B gdl90收发机 故障分析
下载PDF
计算机GDL技术在建筑信息化领域的应用 被引量:6
5
作者 曾旭东 黄海静 谭洁 《重庆大学学报(自然科学版)》 EI CAS CSCD 北大核心 2006年第1期89-92,共4页
信息时代如何有效地利用新的计算机技术提高建筑业生产效率是中国目前建筑业信息化亟待解决的问题.计算机GDL技术是一种开发智能型参数化建筑信息模型的新技术,通过对GDL技术理论和基本特征的深入研究,结合其应用现状,提出计算机GDL技... 信息时代如何有效地利用新的计算机技术提高建筑业生产效率是中国目前建筑业信息化亟待解决的问题.计算机GDL技术是一种开发智能型参数化建筑信息模型的新技术,通过对GDL技术理论和基本特征的深入研究,结合其应用现状,提出计算机GDL技术在建筑信息化领域的开发与应用模式,分析其具体解决方案以及发展前景,为加快建筑信息化进程提供理论依据和解决途径,为提高建筑业生产效率提供新的技术手段. 展开更多
关键词 gdl技术 信息化 建筑业
下载PDF
GDL诱导乳蛋白酸凝胶特性的研究进展 被引量:2
6
作者 王红 李海梅 +3 位作者 李妍 石玚玚 尹未华 张列兵 《中国乳品工业》 CAS 北大核心 2014年第10期24-27,35,共5页
综述了国内外GDL(葡萄糖酸-δ-内酯,Glucono-δ-lactone)诱导乳蛋白质酸凝胶特性的研究方法,并分析了影响凝胶特性的主要因素。目前,研究乳蛋白酸凝胶特性的方法主要有测定凝胶的流变学特性、凝胶的脱水收缩的能力以及凝胶的质构等。乳... 综述了国内外GDL(葡萄糖酸-δ-内酯,Glucono-δ-lactone)诱导乳蛋白质酸凝胶特性的研究方法,并分析了影响凝胶特性的主要因素。目前,研究乳蛋白酸凝胶特性的方法主要有测定凝胶的流变学特性、凝胶的脱水收缩的能力以及凝胶的质构等。乳蛋白在酸凝胶过程中不仅受到GDL添加量的影响,还受到凝胶温度、预热处理及离子强度的影响。 展开更多
关键词 gdl 乳蛋白 凝胶特性
下载PDF
GDL诱导大豆分离蛋白冷凝胶对益生菌的保护 被引量:2
7
作者 张英华 田柬昕 刘德库 《食品工业科技》 CAS CSCD 北大核心 2013年第1期67-69,73,共4页
主要研究了葡萄糖酸内酯(GDL)诱导大豆分离蛋白冷凝胶在胃酸pH环境下对乳酸菌的保护情况。利用GDL诱导形成的大豆分离蛋白冷凝胶在胃酸pH环境下作用30min后乳酸菌的存活率为评价指标,用以评价大豆分离蛋白冷凝胶对乳酸菌的保护情况。通... 主要研究了葡萄糖酸内酯(GDL)诱导大豆分离蛋白冷凝胶在胃酸pH环境下对乳酸菌的保护情况。利用GDL诱导形成的大豆分离蛋白冷凝胶在胃酸pH环境下作用30min后乳酸菌的存活率为评价指标,用以评价大豆分离蛋白冷凝胶对乳酸菌的保护情况。通过正交实验得出,在pH1.2的胃酸环境下,大豆分离蛋白冷凝胶的成胶条件为变性温度90℃、SPI浓度9%、GDL浓度1.2%,对乳酸菌的保护效果最佳。活菌落菌落计数的数量级由初始的107变为105cfu/mL,仅下降了2个数量级,乳酸菌的存活率达到26.61%,得到显著提高。实验结果表明,在胃酸pH环境下GDL诱导的大豆分离蛋白冷凝胶能很好的保护乳酸菌,为益生菌和大豆分离蛋白在食品中的应用提供了参考。 展开更多
关键词 大豆分离蛋白 冷凝胶 gdl 乳酸菌 胃酸
下载PDF
GDL豆腐在不同温度条件下货架期品质分析 被引量:1
8
作者 郑玉玺 董蕾 韩明 《江西农业学报》 CAS 2018年第10期86-89,共4页
在保藏温度梯度为0、5、12℃条件下,测定了GDL豆腐货架期内的感官指标、pH值、菌落总数。结果显示:在建议保藏温度(0~10℃)、建议保藏时间(7 d)内,GDL豆腐的菌落总数和pH值能保持在正常范围内,感官指标基本保证品质,温度越低,保藏质量越... 在保藏温度梯度为0、5、12℃条件下,测定了GDL豆腐货架期内的感官指标、pH值、菌落总数。结果显示:在建议保藏温度(0~10℃)、建议保藏时间(7 d)内,GDL豆腐的菌落总数和pH值能保持在正常范围内,感官指标基本保证品质,温度越低,保藏质量越好;在12℃条件下GDL豆腐在第7天时有较强酸味,无法食用。通过pH值与菌落总数的拟合,发现0℃条件下无法得到拟合关系,5℃条件下得到三元一次方程:y=-12.61x3+222.9x2-1314.8x+2592.6(R2=0.9773,P=0.0431); 12℃条件下得到四元一次方程:y=-8.1921x4+180.29x3-1484.5x2+5419.7x-7395.9(R2=0.9740,P=0.0317)。上述方程能够表征5℃和12℃保藏条件下GDL豆腐pH值与菌落总数的关系。通过pH值与菌落总数的数学拟合,得到的5℃和12℃下拟合曲线,可以快速检测GDL豆腐的污染情况。 展开更多
关键词 温度梯度 gdl豆腐 品质分析 拟合关系
下载PDF
基于GDL非一致孔隙率的PEMFC模拟仿真 被引量:2
9
作者 张智明 沈哲民 +1 位作者 商亚鹏 潘涛 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2017年第8期35-41,共7页
目前,针对质子交换膜燃料电池(PEMFC)性能的数值模拟研究大多假设气体扩散层(GDL)的多孔介质孔隙率一致,但实际上GDL受双极板脊背压缩产生的变形会导致孔隙率的非一致性.文中针对装配压力引起的GDL变形及非一致孔隙率情况,基于有限元理... 目前,针对质子交换膜燃料电池(PEMFC)性能的数值模拟研究大多假设气体扩散层(GDL)的多孔介质孔隙率一致,但实际上GDL受双极板脊背压缩产生的变形会导致孔隙率的非一致性.文中针对装配压力引起的GDL变形及非一致孔隙率情况,基于有限元理论和计算流体力学软件,在FLUENT中导入力学分析得到非一致孔隙率的自定义函数(UDF).模拟结果表明:脊部下方GDL由于孔隙率的变化使得沿Y方向截面纵向气体的流速往双极板方向的递增;且孔隙率的非一致性导致脊部下方的气体浓度较流道下方降低、水含量增大,产生积水现象,这些变化将不利于燃料电池性能的保持.然后在验证函数准确性的同时探究了电池温度、湿度等参数随燃料电池电压的变化规律,并研究了燃料电池内部温度的变化.发现流道下方阴极侧电化学区域比阳极侧温度高,反映了实际燃料电池中阴极侧水堆积现象造成热的传输速度慢于阳极侧的实际情况. 展开更多
关键词 PEMFC性能仿真 gdl变形 非-致孔隙率 自定义函数 电流密度
下载PDF
磨料水射流喷丸对渗碳GDL-1钢表面完整性及疲劳性能的影响 被引量:13
10
作者 邹雄 梁益龙 +2 位作者 吴泽丽 秦少杰 胡君杰 《中国表面工程》 EI CAS CSCD 北大核心 2017年第2期41-47,共7页
为研究后混合磨料水射流喷丸对渗碳后GDL-1钢表面完整性及疲劳性能的影响规律,利用X射线应力衍射仪、粗糙度仪、显微硬度仪、金相显微镜、扫描电镜、透射电镜等分析了水射流喷丸强化对试样表面残余应力场、粗糙度、硬度、形貌、组织的... 为研究后混合磨料水射流喷丸对渗碳后GDL-1钢表面完整性及疲劳性能的影响规律,利用X射线应力衍射仪、粗糙度仪、显微硬度仪、金相显微镜、扫描电镜、透射电镜等分析了水射流喷丸强化对试样表面残余应力场、粗糙度、硬度、形貌、组织的变化规律,并用升降法测定了抛光及抛光+水喷丸两种状态下渗碳GDL-1钢拉压疲劳性能。结果表明:试样经水喷丸处理后,表面粗糙度有所增加,并且有磨料撞击形成的小凹坑及在表面残留有玻璃磨料,但同时表层脱碳层大部分被去除,硬度得到显著提升、残留奥氏体含量降低,晶粒得到细化,并且在表面形成一定深度的残余压应力层。经水喷丸处理的试样,其较未经水喷丸的疲劳极限提高了19%,且疲劳源全部在远离表面接近1/2R位置形成,这说明水射流喷丸在表层产生的高残余压应力和晶粒细化可以显著提高渗碳钢的疲劳性能。 展开更多
关键词 gdl-1钢 磨料水射流喷丸 表面完整性 疲劳性能
下载PDF
GDL-1型高强韧贝氏体钢的疲劳裂纹扩展特性的研究 被引量:1
11
作者 朱茂兰 凌敏 梁益龙 《钢铁研究》 CAS 2008年第3期25-26,54,共3页
通过疲劳裂纹扩展试验,研究了不同热处理状态下GDL-1型高强韧贝氏体钢的疲劳裂纹扩展速率和疲劳裂纹扩展门槛值,得出了有价值有意义的结论。
关键词 gdl-1 疲劳裂纹扩展速率 疲劳裂纹扩展门槛值
下载PDF
A compact X-band backward traveling-wave accelerating structure
12
作者 Xian-Cai Lin Hao Zha +4 位作者 Jia-Ru Shi Qiang Gao Fang-Jun Hu Qing-Zhu Li Huai-Bi Chen 《Nuclear Science and Techniques》 SCIE EI CAS CSCD 2024年第5期13-29,共17页
Very high-energy electrons(VHEEs)are potential candidates for FLASH radiotherapy for deep-seated tumors.We proposed a compact VHEE facility based on an X-band high-gradient high-power technique.In this study,we invest... Very high-energy electrons(VHEEs)are potential candidates for FLASH radiotherapy for deep-seated tumors.We proposed a compact VHEE facility based on an X-band high-gradient high-power technique.In this study,we investigated and realized the first X-band backward traveling-wave(BTW)accelerating structure as the buncher for a VHEE facility.A method for calculating the parameters of single cell from the field distribution was introduced to simplify the design of the BTW structure.Time-domain circuit equations were applied to calculate the transient beam parameters of the buncher in the unsteady state.A prototype of the BTW structure with a thermionic cathode-diode electron gun was designed,fabricated,and tested at high power at the Tsinghua X-band high-power test stand.The structure successfully operated with 5-MW microwave pulses from the pulse compressor and outputted electron bunches with an energy of 8 MeV and a pulsed current of 108 mA. 展开更多
关键词 Backward traveling-wave accelerating structure Equivalent circuit model High-power test Very high-energy electron radiotherapy
下载PDF
Strategies to achieve effective nitrogen activation
13
作者 Bin Chang Huabin Zhang +1 位作者 Shuhui Sun Gaixia Zhang 《Carbon Energy》 SCIE EI CAS CSCD 2024年第5期137-163,共27页
Ammonia serves as a crucial chemical raw material and hydrogen energy carrier.Aqueous electrocatalytic nitrogen reduction reaction(NRR),powered by renewable energy,has attracted tremendous interest during the past few... Ammonia serves as a crucial chemical raw material and hydrogen energy carrier.Aqueous electrocatalytic nitrogen reduction reaction(NRR),powered by renewable energy,has attracted tremendous interest during the past few years.Although some achievements have been revealed in aqueous NRR,significant challenges have also been identified.The activity and selectivity are fundamentally limited by nitrogen activation and competitive hydrogen evolution.This review focuses on the hurdles of nitrogen activation and delves into complementary strategies,including materials design and system optimization(reactor,electrolyte,and mediator).Then,it introduces advanced interdisciplinary technologies that have recently emerged for nitrogen activation using high-energy physics such as plasma and triboelectrification.With a better understanding of the corresponding reaction mechanisms in the coming years,these technologies have the potential to be extended in further applications.This review provides further insight into the reaction mechanisms of selectivity and stability of different reaction systems.We then recommend a rigorous and detailed protocol for investigating NRR performance and also highlight several potential research directions in this exciting field,coupling with advanced interdisciplinary applications,in situ/operando characterizations,and theoretical calculations. 展开更多
关键词 activation via mediators catalyst optimization electrochemical nitrogen fixation high-energy activation of nitrogen NITROGEN
下载PDF
Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase
14
作者 Guntae Lim Dong Guk Kang +6 位作者 Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi Kwang Chul Roh Do Youb Kim Seung-Wan Song 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第7期568-576,共9页
Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability issues.Herein,a strategy of... Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability issues.Herein,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on FEC.Unprecedented stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only additive.DAMS-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs. 展开更多
关键词 high-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling
下载PDF
Nonlinear Violence in Nonlinear Oscillations at High Energy
15
作者 Yair Zarmi 《Applied Mathematics》 2024年第1期65-95,共31页
This paper focuses on the characteristics of solutions of nonlinear oscillatory systems in the limit of very high oscillation energy, E;specifically, systems, in which the nonlinear driving force grows with energy muc... This paper focuses on the characteristics of solutions of nonlinear oscillatory systems in the limit of very high oscillation energy, E;specifically, systems, in which the nonlinear driving force grows with energy much faster for x(t) close to the turning point, a(E), than at any position, x(t), that is not too close to a(E). This behavior dominates important aspects of the solutions. It will be called “nonlinear violence”. In the vicinity of a turning point, the solution of a nonlinear oscillatory systems that is affected by nonlinear violence exhibits the characteristics of boundary-layer behavior (independently of whether the equation of motion of the system can or cannot be cast in the traditional form of a boundary-layer problem.): close to a(E), x(t) varies very rapidly over a short time interval (which vanishes for E → ∞). In traditional boundary layer systems this would be called the “inner” solution. Outside this interval, x(t) soon evolves into a moderate profile (e.g. linear in time, or constant)—the “outer” solution. In (1 + 1)-dimensional nonlinear energy-conserving oscillators, if the solution is reflection-invariant, nonlinear violence determines the characteristics of the whole solution. For large families of nonlinear oscillatory systems, as E → ∞, the solutions for x(t) tend to common, indistinguishable profiles, such as periodic saw-tooth profiles or step-functions. If such profiles are observed experimentally in high-energy oscillations, it may be difficult to decipher the dynamical equations that govern the motion. The solution of motion in a central field with a non-zero angular momentum exhibits extremely fast rotation around a turning point that is affected by nonlinear violence. This provides an example for the possibility of interesting phenomena in (1 + 2)-dimensional oscillatory systems. 展开更多
关键词 high-energy Oscillations Nonlinear Violence Boundary-Layer Characteristics
下载PDF
室内设计与家具业的信息化链接——智能物体GDL技术的应用研究 被引量:1
16
作者 曾旭东 谭洁 《室内设计》 2005年第3期20-20,29-31,27,共5页
室内设计师进行室内设计时必须考虑室内设计与家具的关系,让家具融入周围的空间,如何利用新的信息化技术——智能物体GDL技术,让室内设计与家具业的之间更好的信息化链接是本文探讨的重点。
关键词 家具 室内设计 关系 智能物体 室内设计师 信息化技术 家具业 gdl 物体 智能
下载PDF
GDL-1型贝氏体钢的断裂韧性
17
作者 梁益龙 凌敏 +3 位作者 朱茂兰 罗来马 汪航 王新 《贵州工业大学学报(自然科学版)》 CAS 2007年第2期24-28,共5页
对一种新型高强韧微变形钢(GDL-1)的断裂韧性进行了研究,分析了七种不同热处理状态的JR阻力曲线。结果表明,试验钢在经空冷250℃-300℃回火后的裂纹扩展阻力较大,J1C=0.1415-0.1513(MPa.m)、AK=97-120.5(J),其断裂韧性和冲击韧性优于其... 对一种新型高强韧微变形钢(GDL-1)的断裂韧性进行了研究,分析了七种不同热处理状态的JR阻力曲线。结果表明,试验钢在经空冷250℃-300℃回火后的裂纹扩展阻力较大,J1C=0.1415-0.1513(MPa.m)、AK=97-120.5(J),其断裂韧性和冲击韧性优于其它状态。扫描电镜和透射电镜分析表明,空冷后新型高强韧GDL-1钢的显微组织为窄束状贝氏体+马氏体和部分残余奥氏体复合组织,残余奥氏体以薄膜形态分割贝氏体板条而形成超细化亚单元,增加了材料的微观塑性。此外,低温回火改善钢的韧性,并使残余奥氏体的稳定性提高,从而使该钢在空冷250℃-300℃回火后具有良好的冲击韧性和断裂韧性。 展开更多
关键词 微变形 gdl-1 热处理 断裂韧性 空冷
下载PDF
GDL-1钢不同热处理状态下的显微组织与力学性能
18
作者 凌敏 梁益龙 李劲松 《金属材料与冶金工程》 CAS 2012年第3期-,共4页
对一种新型高强韧微变形钢(GDL-1)在七种热处理状态下的显微组织与力学性能进行了分析。结果表明,该钢在900℃保温1 h空冷回火后的显微组织以窄束状贝氏体+粒状贝氏体为主加少量马氏体,而油淬回火后的组织为回火马氏体;910℃加热奥氏体... 对一种新型高强韧微变形钢(GDL-1)在七种热处理状态下的显微组织与力学性能进行了分析。结果表明,该钢在900℃保温1 h空冷回火后的显微组织以窄束状贝氏体+粒状贝氏体为主加少量马氏体,而油淬回火后的组织为回火马氏体;910℃加热奥氏体化1 h的晶粒度普遍在8~9级。在低温回火温度范围内,随着回火温度的升高,冲击韧性逐渐增大,屈服强度逐渐降低,硬度变化不大。 展开更多
关键词 gdl-1 显微组织 力学性能 晶粒度
下载PDF
GDL-1钢渗碳后不同冷速的温度场模拟与实验 被引量:3
19
作者 卜珍凯 梁益龙 杨闯 《贵州工业大学学报(自然科学版)》 CAS 2006年第4期25-28,45,共5页
GDL-1钢是一种新型微变形贝氏体钢,通过对GDL-1钢渗碳后采用不同冷速冷却到室温,测量不同冷速的变形量,并结合有限元模拟不同条件下温度场的方法研究了GDL新材料的变形特性和规律。结果表明,GDL-1钢通过空冷降低渗碳后的冷速,内外温差... GDL-1钢是一种新型微变形贝氏体钢,通过对GDL-1钢渗碳后采用不同冷速冷却到室温,测量不同冷速的变形量,并结合有限元模拟不同条件下温度场的方法研究了GDL新材料的变形特性和规律。结果表明,GDL-1钢通过空冷降低渗碳后的冷速,内外温差减小、热应力减小,相变时发生贝氏体转变,对减小变形具有重要作用。 展开更多
关键词 淬火变形 渗碳 gdl 计算机模拟
下载PDF
2种市售成品油对GDL诱导大豆蛋白乳浊凝胶特性的影响
20
作者 成玉梁 花榜清 +1 位作者 吴超义 钱和 《食品工程》 2014年第4期39-41,共3页
通过研究2种市售成品油(大豆油、葵花籽油)的添加量对葡萄糖酸内酯(GDL)诱导大豆蛋白乳浊凝胶的凝胶强度、杨氏模量和凝胶保水性的综合影响,分析和探讨常见油脂在大豆蛋白乳浊凝胶形成过程中对凝胶结构产生的影响以及与蛋白可能发生的... 通过研究2种市售成品油(大豆油、葵花籽油)的添加量对葡萄糖酸内酯(GDL)诱导大豆蛋白乳浊凝胶的凝胶强度、杨氏模量和凝胶保水性的综合影响,分析和探讨常见油脂在大豆蛋白乳浊凝胶形成过程中对凝胶结构产生的影响以及与蛋白可能发生的相互作用及机理。试验结果表明,随着油脂添加量的增加,凝胶强度呈现先降低后增加的趋势,杨氏模量逐步增大,而凝胶保水性则随油脂添加量的增加逐渐降低。 展开更多
关键词 大豆蛋白 葡萄糖酸内酯 油脂 凝胶
下载PDF
上一页 1 2 17 下一页 到第
使用帮助 返回顶部