Study on the evolution of solid–liquid–gas in multi-scale pore methane in tectonic coal

The rich accumulation of methane(CH_(4))in tectonic coal layers poses a significant obstacle to the safe and efficient extraction of coal seams and coalbed methane.Tectonic coal samples from three geologically complex regions were selected,and the main results obtained by using a variety of research tools,such as physical tests,theoretical analyses,and numerical simulations,are as follows:22.4–62.5 nm is the joint segment of pore volume,and 26.7–100.7 nm is the joint segment of pore specific surface area.In the dynamic gas production process of tectonic coal pore structure,the adsorption method of methane molecules is“solid–liquid adsorption is the mainstay,and solid–gas adsorption coexists”.Methane stored in micropores with a pore size smaller than the jointed range is defined as solid-state pores.Pores within the jointed range,which transition from micropore filling to surface adsorption,are defined as gaseous pores.Pores outside the jointed range,where solid–liquid adsorption occurs,are defined as liquid pores.The evolution of pore structure affects the methane adsorption mode,which provides basic theoretical guidance for the development of coal seam resources.

Micro-structural evolution and their effects on physical properties in different types of tectonically deformed coals

The macromolecular structure of tectonically deformed coals(TDC)may be determined by the deformation mechanisms of coal.Alterations of the macromolecular structure change the pore structure of TDC and thereby impact physical properties such as porosity and permeability.This study focuses on structure and properties of TDC from the Huaibei and Huainan coal mining areas of southern North China.Relationships between the macromolecular structure and the pore structure of TDC were analyzed using techniques such as X-ray diffraction,high-resolution transmission electron microcopy,and the low-temperature nitrogen adsorption.The results indicated that the directional stress condition can cause the arrangement of basic structural units(BSU)more serious and closer.And,the orientation is stronger in ductile deformed coal than in brittle deformed coal.Tectonic deformation directly influences the macromolecular structure of coal and consequently results in dynamic metamorphism.Because the size of BSU in brittle deformed coal increases more slowly than in ductile deformed coal,frictional heating and stress-chemistry of shearing areas might play a more important role,locally altering coal structure under stress,in brittle deformed coal.Strain energy is more significant in increasing the ductile deformation of coal.Furthermore,mesopores account for larger percentage of the nano-scale pore volume in brittle deformed coals,while mesopores volume in ductile deformed coal diminishes rapidly along with an increase in the proportion of micropores and sub-micropores.This research also approved that the deformations of macromolecular structures change nano-scale pore structures,which are very important for gas adsorption and pervasion space for gas.Therefore,the exploration and development potential of coal bed methane is promising for reservoirs that are subjected to a certain degree of brittle deformation(such as schistose structure coal,mortar structure coal and cataclastic structure coal).It also holds promise for TDC resulting from wrinkle structure coal of low ductile deformation and later superimposed by brittle deformation.Other kinds of TDC suffering from strong brittle-ductile and ductile deformation,such as scale structure coal and mylonitic structure coal,are difficult problems to resolve.

Response of Macromolecular Structure to Deformation in Tectonically Deformed Coal

The structural evolution of tectonically deformed coals （TDC） with different deformational mechanisms and different deformational intensities are investigated in depth through X-ray diffraction （XRD） analysis on 31 samples of different metamorphic grades （R ： 0.7%-3.1%） collected from the Huaibei coalfield. The results indicated that there are different evolution characteristics between the ductile and brittle deformational coals with increasing of metamorphism and deformation. On the one hand, with the increase of metamorphism, the atomic plane spacing （d002） is decreasing at step velocity, the stacking of the BSU layer （Lc） is increasing at first and then decreasing, but the extension of the BSU layer （La） and the ratio of La/Lc are decreasing initially and then increasing. On the other hand, for the brittle deformational coal, d002 is increasing initially and then decreasing, which causes an inversion of the variation of Lc and La under the lower-middle or higher-middle metamorphism grade when the deformational intensity was increasing. In contrast, in the ductile deformational coals, d002 decreased initially and then increased, and the value of L~ decreased with the increase of deformational intensity. But the value of La increased under the lower-middle metamorphism grade and increased at first and then decreased under the higher-middle metamorphism grade. We conclude that the degradation and polycondensation of TDC macromolecular structure can be obviously impacted during the ductile deformational process, because the increase and accumulation of unit dislocation perhaps transforms the stress into strain energy. Meanwhile, the brittle deformation can transform the stress into frictional heat energy, and promote the metamorphism and degradation as well. It can be concluded that deformation is more important than metamorphism to the differential evolution of the ductile and brittle deformational coals.

Simulation of Paleotectonic Stress Fields and Distribution Prediction of Tectonic Fractures at the Hudi Coal Mine, Qinshui Basin

Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mechanical model was established under the condition of rock mechanics and geostress, and the finite element method was used to simulate the paleotectonic stress field. Based on the Griffith and Mohr-Coulomb criterion, the distribution of tectonic fractures in the Shanxi Formation during the Indosinian, Yanshanian, and Himalayan period can be predicted with the index of comprehensive rupture rate. The results show that the acting force of the Pacific Plate and the India Plate to the North China Plate formed the direction of principal stress is N-S, NW - SE, and NE - SW, respectively, in different periods in the study area. Changes in the direction and strength of the acting force led to the regional gradients of tectonic stress magnitude, which resulted in an asymmetrical distribution state of the stress conditions in different periods. It is suggested that the low-stress areas are mainly located in the fault zones and extend along the direction of the fault zones. Furthermore, the high-stress areas are located in the junction of fold belts and the binding site of multiple folds. The development of tectonic fractures was affected by the distribution of stress intensity and the tectonic position of folds and faults, which resulted in some developed areas with level I and II. There are obvious differences in the development of tectonic fractures in the fold and fault zones and the anticline and syncline structure at the same fold zones. The tectonic fractures of the Shanxi Formation during the Himalayan period are more developed than those during the Indosinian and Yanshanian period due to the superposition of the late tectonic movement to the early tectonic movement and the differences in the magnitude and direction of stress intensity.

The impact of depositional environment and tectonic evolution on coalbed methane occurrence in West Henan, China

A deeper understanding of the mechanisms by which geological factors(depositional environment and tectonic evolution) control the occurrence of coalbed methane(CBM) is important for the utilization of CBM resources via surface-drilled wells and the elimination of coal-methane outbursts, the latter of which is a key issue for coal mine safety. Based on drill core data, high-pressure isothermal adsorption experiments, scanning electron microscopy experiments, mercury intrusion porosimetry, and X-ray diffraction experiments, the impact of the depositional environment and tectonic evolution on CBM occurrence of the II-1 coal seam of the Shanxi Formation in West Henan was analyzed. Results showed that the depositional environment led to the epigenetic erosion of tidal flat coal-accumulating structures by shallow-delta distributary channel strata. This resulted in the replacement of the original mudstonesandy mudstone coal seam immediate roof with fine-to-medium grained sandstones, reducing methane storage capacity. Epigenetic erosion by the depositional environment also increased coal body ash content(from 6.9% to 21.4%) and mineral content, filling the cleat system and reducing porosity, reducing methane storage capacity. The maximum methane adsorption capacity of the coal body reduced from35.7 cm3/g to 30.30 cm3/g, and Langmuir pressure decreased from 1.39 MPa to 0.909 MPa. Hence, the methane adsorption capacity of the coal body decreased while its capacity for methane desorption increased. Owing to the tectonic evolution of West Henan, tectonically deformed coal is common; as it evolves from primary cataclastic coal to granulitic coal, the angle of the diffraction peak increases, d002 decreases, and La, Lc, and Nc increase; these traits are generally consistent with dynamic metamorphism.This is accompanied by increases in the total pore volume and specific surface area of the coal body, further increasing the capacity for methane storage. Increases in micropore volume and specific surface area also increase the ability of the coal body to adsorb methane.

Experimental study on the deformation behaviour,energy evolution law and failure mechanism of tectonic coal subjected to cyclic loads

Compared to intact coal,tectonic coal exhibits unique characteristics.The deformation behaviours under cyclic loading with different confining pressures and loading rates are monitored by MTS815 test system,and the mechanical and energy properties are analysed using experimental data.The results show that the stress-strain curve could be divided into four stages in a single cycle.The elastic strain and elastic energy density increase linearly with deviatoric stress and are proportional to the confining pressure and loading rate;irreversible strain and dissipated energy density increase exponentially with deviatoric stress,inversely proportional to the confining pressure and loading rate.The internal structure of tectonic coal is divided into three types,all of which are damaged under different deviatoric stress levels,thereby explaining the segmentation phenomenon of stress-strain curve of tectonic coal in the cyclic loading process.Tectonic coal exhibits nonlinear energy storage characteristics,which verifies why the tectonic coal is prone to coal and gas outburst from the principle of energy dissipation.In addition,the damage mechanism of tectonic coal is described from the point of energy distribution by introducing the concepts of crushing energy and friction energy.

Similarity simulation of bolt support in a coal roadway in a tectonic stress field

In order to study the mechanism of bolt support and the behavior of strata in a coal roadway under tectonic stress,deformation and destruction of a roof,floor and sides were studied using an experiment in similarity simulation.We also studied the mechanism and types of bolt support functions in the coal roadway.The results show that with an increase in horizontal tectonic stress,the strata in the roof and floor of the roadway gradually separate and become shear failure areas.Coal in side walls moves,but its integrity remains intact.Side bolts are mainly affected by tension and roof bolts by the effect of shear.

Effect of an electrostatic field on gas adsorption and diffusion in tectonic coal

The characteristics of adsorption, desorption, and diffusion of gas in tectonic coal are important for the prediction of coal and gas outbursts. Three types of coal samples, of which both metamorphic grade and degree of damage is different, were selected from Tongchun, Qilin, and Pingdingshan mines. Using a series of experiments in an electrostatic field, we analyzed the characteristics of gas adsorption and diffusion in tectonic coal. We found that gas adsorption in coal conforms to the Langmuir equation in an electrostatic field. Both the depth of the adsorption potential well and the coal molecular electroneg- ativity increases under the action of an electrostatic field. A Joule heating effect was caused by changing the coal-gas system conductivity in an electrostatic field. The quantity of gas adsorbed and AP result from competition between the depth of the adsorption potential well, the coal molecular electronegativ- ity, and the Joule heating effect. △P peaks when the three factors control behavior equally. Compared with anthracite, the impact of the electrostatic field on the gas diffusion capacity of middle and high rank coals is greater. Compared with the original coal, the gas adsorption quantity,△P, and the gas diffusion capacity of tectonic coal are greater in an electrostatic field. In addition, the smaller the particle size of tectonic coal, the larger the△P.

Influence of combination forms of intact sub-layer and tectonically deformed sub-layer of coal on the gas drainage performance of boreholes: a numerical study

High concentration and large flow flux of gas drainage from underground coal seams is the precondition of reducing emission and large-scale use of gas.However,the layered occurrence of coal seams with tectonically deformed sub-layers and intact sub-layers makes it difficult to effectively drain gas through commonly designed boreholes.In this study,the gas drainage performance in coal seams with different combinations of tectonically deformed sub-layers and intact sub-layers was numerically analyzed.The analysis results show that the gas drainage curve changes from a single-stage line to a dual-stage curve as the permeability ratios of Zone II(kII)and Zone I(kI)increase,raising the difficulty in gas drainage.Furthermore,a dual-system pressure decay model based on the first-order kinetic model was developed to describe the dual-stage characteristics of pressure decay curves with different permeability ratios.In the end,the simulation results were verified with reference to in-situ drainage data from literature.The research results are helpful for mines,especially those with layered coal seams comprising tectonically deformed sub-layers and intact sub-layers,to choose appropriate gas drainage methods and develop the original drainage designs for achieving better gas drainage performance.

Stability control of surrounding rocks for a coal roadway in a deep tectonic region

In order to effectively control the deformation and failure of surrounding rocks in a coal roadway in a deep tectonic region, the deformation and failure mechanism and stability control mechanism were studied. With such methods as numerical simulation and field testing, the distribution law of the displacement, stress and plastic zone in the surrounding rocks was analyzed. The deformation and failure mechanisms of coal roadways in deep tectonic areas were revealed: under high tectonic stress, two sides will slide along the roof or floor; while the plastic zone of the two sides will extend along the roof or floor,leading to more serious deformation and failure in the corner of two sides and the bolt supporting the corners is readily cut off by the shear force or tension force. Aimed at controlling the large slippage deformation of the two sides, serious deformation and failure in the corners of the two sides and massive bolt breakage, a ‘‘controlling and yielding coupling support'' control technology is proposed. Firstly, bolts which do not pass through the bedding plane should be used in the corners of the roadway, allowing the two sides to have some degree of sliding to achieve the purpose of ‘‘yielding'' support, and which avoid breakage of the bolts in the corner. After yielding support, bolts in the corner of the roadway and which pass through the bedding plane should be used to control the deformation and failure of the coal in the corner. ‘‘Controlling and yielding coupling support'' technology has been successfully applied in engineering practice, and the stability of deep coal roadway has been greatly improved.

Study on relation between tectonic stress and coal-mining subsidence with similar material simulation

Using a minitype and stress-type test device for similar material simulation of coal-mining subsidence, the relation between tectonic stress and coal-mining subsidence was successfully simulated, furthermore, the test period of similar material simulation was obviously shortened and the test process was more dexterous and convenient. To do simi-lar material simulation with the minitype and stress-type test device was feasible and high-efficient. Bringing two models with the same geological and mining conditions to bear lateral compressive stress and tensile stress respectively and simulating the process of underground mining, the test results indicate that: under the compressive stress, the col-lapse of the coal roof occurs belatedly and the damaged range in cover of coal seam is smaller, therefore the movement and deformation of the cover and its damage to the ground geological environment are not evident; whereas under tensile stress, the situation is contrary to which mentioned above. A conclusion was obtained from the test that the ground environment hazards in coal mining areas were controlled by the regional geo-logical tectonic stress field.

Coal forming environments and their relationship to tectonic activity in the Cévennes Stephanian coal basin

Coal forming environments in the tectonically controlled intermontane Stephanian Cévennes coal basin (Massif central, France) show a complex interelationship between structural and sedimentological features. The study of the general structural features and the geometry of the coal beds developed during the different stages in the evolution of the basin, and the spatial relation of the lithofacial units to the early tectonic activities, lead the authors to suggest the following model. The synsedimentary faults that occurred as both intrabasinal and marginal faults controlled not only the spatial distribution, shape and thickness of the detrital rock units and coal seams, but also caused the inversion of the tectonic style. The marginal faults exercised important controls on the geometry of the basin and the distribution of lithofacial units. However due to the subsidence of the central part of the basin and the depocenter, and the to differences in the timing and intensity of the displacement the coal enrichment zones shifted both vertically and laterally. This eventually resulted in the inversion of the whole tectonic framework from semi graben through graben to a new semi graben. The style and rate of the tectonic movement and basin filling that occurred in the Stephanian Cévennes coal basin were in turn closely linked with the tectonic movement in the surrounding area. Therefore the authors propose that the environment and processes of coal formation in this basin are closely linked to its tectonic evolution.

The influence of intensity and properties of tectonic stress on the process of coalification

Through the research on stress metamorphism character of the II1 coal seam in Ludian gliding structure, the stress effecting factors of metamorphism and hydrocarbon generation process of tectonic coal were studied. It is shown that different tectonic stress has different coal evolution effects. Compared with tensional stress, compressive stress, which has apparent anisotropic characteristics, has greater stimulative effect against the increase of coal metamorphic degree, the abscission of functional group and side chains of basic structural unit, and the formation of gas primarily composed of methane.

Geochemistry of Mercury in the Permian Tectonically Deformed Coals from Peigou Mine, Xinmi Coalfield, China

As the mercury emitted from coal combustion can lead to serious environmental issues, researchers pay more attention to the content, distribution and occurrence of mercury in coal. In this paper, the content, distribution, and occurrence of mercury in the Permian tectonically deformed coals from Peigou Mine, Xinmi coalfield, Henan Province were investigated. A total of 18 bench samples were taken from No.2-1 coals seam in Peigou Mine, including 15 coal bench samples, two roofs and one floor. The mercury concentration, mineral composition, and main inorganic element content of 18 samples were determined by DMA-80 direct mercury analyzer, XRD, and XRF respectively. The results show that the mercury content ranges from 0.047 ppm to 0.643 ppm, with an average of 0.244 ppm. Though the coal seam has turned into typical tectonically deformed coal by the strong tectonic destruction and plastic deformation, the vertical distribution of mercury has remarkable heterogeneity in coal seam section. By the analysis of correlation between mercury and the main inorganic elements and the mineral composition in coal, we infer that majority of mercury mainly relates to pyrite or kaolinite.

Coal Deformation, Metamorphism and Tectonic Environment in Xinhua, Hunan

This article discusses in detail chemical composition, molecular structure, microstructure phenomena, estimate of the palaeo-stress, paleo-temperature and the strain rate to deepen the knowledge for the correlation of coal deformation and metamorphism with structural environment in Xinhua Hunan by coal quality analysis, XRD and SEM methods, which provide dependable theoretical foundation for coal resource exploitation and utilization. The results show that 1) d002 value of six coal samples is from 3.36 to 3.39 nm, coal resolved itself into aphanitic graphite with the increase of coal rank during coalification, which is characterized by graphite flakes, and the crystallite size is from 50 nm to 250 nm;A certain degree of 3R-structure content is increases and the crystallite size is extend with the coalification process, but RH-structure content is decreased;2) the tectonic environment of research area belongs to the ductile-brittle deformation, which was characterized by low temperature, low stress, high strain rate;3) Tianlongshan magmatic intrusion provided heat source, its side-extrusion made the molecules structure of coal ordering, distance between layers decreased, finally it caused the formation of aphanitic graphite.

Excess Coalbed Methane Production Mechanism in the Process of Coal Tectonic Deformation

Source and occurrence of Excess Coalbed Methane is a long-term concern research topic in Coal Geology and Structural Geology. Since it is essential to understand the outburst mechanism of coal gas, and to support the coalbed methane development projects as the theoretical basis. We found in the study that, huge imparity is behind the evolutionary trend on molecular structure and the mechanism of influence from different deformation. The thesis demonstrates its probable routes of gas evolution according to distinct deformation mechanisms of coal. In the role of brittle deformation mechanism, a rapidly formed advantage rupture surface along with sliding motion from which has worked on coal. As another result, mechanical energy has transformed into friction and kinetic energy during the process. Kinetic energy increases simultaneously, which brings some results, that the new generated gas molecule. While the chemical structure of coal remains in a steady-state and do not react easily an outburst with gas. Mechanical energy turns into strain energy through its ductile deformation mechanism. The dislocation or lamellar slip made disordered between the constitutional units of aromatic rings and aromatic lamellas, as soon as secondary structural defects created. On another hand, molecular motion accelerates and splits off the small molecular on the side chain, due to the dissociation of aromatic nucleus;CH4 gas molecular was generated and placed in the secondary structural defect of coal, along with a great deal of strain energy in non-steady-state. By breaking away the balance maintaining terms, huge strain energy releases suddenly, small moleculars are free from the secondary structure defect, react outburst with gas. Furthermore to extend the discussion of the conventional physical ideas on coal absorb gas, according to the phenomenon of exceeded CBM, the gas molecular has a significant chance existing in a low bond energy of chemical bonds of coal structure.

Geological modeling of coalbed methane reservoirs in the tectonically deformed coal seam group in the Dahebian block,western Guizhou,China

The widely spread Carboniferous-Permian coal seam group in southern China has great potential for coalbed methane resources,but the extensively developed tectonically deformed coal seriously restricts its development.Taking the Dahebian block in western Guizhou as the study area,the geological model of coalbed methane reservoirs in the tectonically deformed coal seam group was established,and the spatial distribution pattern of model parameters was clarified by clustering algorithms and factor analysis.The facies model suggests that the main coal body structures in Nos.1,4,and 7 coal seams are cataclastic coal and granulated coal,whereas the No.11 coal seam is dominated by granulated coal,which has larger thicknesses and spreads more continuously.The in situ permeability of primary undeformed coal,cataclastic coal,granulated coal,and mylonitized coal reservoirs are 0.333 mD,0.931 mD,0.146 mD,and 0.099 mD,respectively,according to the production performance analysis method.The property model constructed by facies-controlled modeling reveals that Nos.1,4,and 7 coal seams have a wider high-permeability area,but the gas content is lower;the high-permeability area in the No.11 coal seam is more limited,but the gas content is higher.The results of the self-organizing map neural network and K-means clustering indicate that the geological model can be divided into 6 clusters,the model parameter characteristics of the 6 clusters are summarized by data analysis in combination with 6 factors extracted by factor analysis,and the application of data analysis results in multi-layer coalbed methane co-development is presented.This study provides ideas for the geological modeling in the tectonically deformed coal seam group and its data analysis.

Characteristics of high-rank coal structure parallel and perpendicular to the bedding plane via NMR and X-ray CT

Pores and fractures and their connectivity play a significant role in coalbed methane production.To investigate the growth characteristics and connectivity of pores and fractures in coal parallel and perpendicular to the bedding plane,the pores and fractures of high-rank coal samples collected from the southern Qinshui Basin were measured by low-field nuclear magnetic resonance,X-ray-computed tomography and field emission scanning electron microscopy.Then,the determinants of their connectivity were further discussed.The results show that the high-rank coal samples have similar pore size distributions both parallel and perpendicular to the bedding plane.They primarily contain mesopores(2-50 nm in width),followed by macrospores(> 50 nm in width).The research indicated that the high-rank coal connectivity parallel to the bedding plane is significantly better than that perpendicular to the bedding plane.The connectivity of high-rank coal is mainly determined by throats,and the orientation of the pores and fractures.The two connectivity modes in high-rank coal are "pore connectivity," in which the throats are mainly pores with a low coordination number,and "microfissure connectivity",in which the throats are mainly microfissures with a high coordination number.

Structure and production fluid flow pattern of post-fracturing high-rank coal reservoir in Southern Qinshui Basin

Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.

Influence of depressurization rate on gas production capacity of high-rank coal in the south of Qinshui Basin, China

A desorption simulation experiment with the condition of simulated strata was designed. The experiment, under different depressurizing rates and the same fluid saturation, was conducted on the sample from 3# coal of Daning coal mine in Jincheng, Shanxi Province. The gas production rate and pressure change at both ends of the sample were studied systematically, and the mechanisms of some phenomena in the experiment were discussed. The experimental results show that, whether at fast or slow depressurizing rate, the methane adsorbed to high-rank coal can effectively desorb and the desorption efficiency can reach above 90%. There is an obvious inflection point on the gas yield curve during the desorption process and it appears after the pressure on the lump of coal reduces below the desorption pressure. The desorption of methane from high-rank coal is mainly driven by differential pressure, and high pressure difference is conducive to fast desorption. In the scenario of fast depressurization, the desorption inflection appears earlier and the gas production rate in the stage of rapid desorption is higher. It is experimentally concluded that the originally recognized strategy of long-term slow CBM production is doubtful and the economic benefit of CBM exploitation from high-rank coal can be effectively improved by rapid drainage and pressure reduction. The field experiment results in pilot blocks of Fanzhuang and Zhengzhuang show that by increasing the drainage depressurization rate, the peak production of gas well would increase greatly, the time of gas well to reach the economic production shortened, the average time for a gas well to reach expected production reduced by half, and the peak gas production is higher.