Advances in seismological methods for characterizing fault zone structure

Large earthquakes frequently occur along complex fault systems.Understanding seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone structures.We provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity analysis.Observational conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location accuracy.Dense seismic arrays can overcome these limitations and enable more detailed investigations of fault zone structures.Moreover,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic array.We found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

Detailed sedimentary structure of the Mianning segment of the Anninghe fault zone revealed by H/V spectral ratio

The Anninghe fault is a major left-lateral strike-slip fault in southwest China and a seismic gap with a potential earthquake larger than MW 7.0 lies in the Mianning-Xichang segment according to recent observations.The shallow structure of this region can offer a glimpse into the geometry of the fault,which plays an important role in earthquake hazard mitigation.To further investigate the sedimentary structure of the Anninghe fault zone,two dense linear arrays with a station spacing of around 80 m were deployed across the fault.In this study,the H/V spectral ratio(HVSR),together with its peak frequency at each station site,was obtained by applying the Nakamura method.Our findings demonstrate that the peak frequency behaves in high correlation with lithology and is controlled by topography.HVSR in foothills or regions with magmatic intrusion shows a single peak at about 2–3 Hz.In locations with abundant Quaternary sedimentation,such as Anninghe valleys and fracture zones,another low-frequency peak around 0.4 Hz can be noticed in HVSR.By using the empirical relationship,the thickness of the sedimentary layer around the fault fracture zone is estimated to be 300–600 m.Furthermore,the sedimentary interface shows a downward dip to the east,possibly influenced by the east-west extrusion stress.Considering the resonance effect,buildings with 6–9 stories in the valley area of the Anninghe require additional attention in earthquake hazard prevention.

A wide hybrid zone mediated by precipitation contributed to confused geographical structure of Scutiger boulengeri

Confused geographical structure of a population and mitonuclear discordance are shaped by a combination of rapid changes in population demographics and shifts in ecology.In this study,we generated a time-calibrated phylogeny of Scutiger boulengeri,an endemic Xizang alpine toad occurring in mountain streams on the Qinghai-Xizang(Tibet)Plateau(QTP).Based on three mitochondrial DNA(mt DNA)genes,eight clades were assigned to three deeply divergent lineages.Analysis of nuclear DNA(nu DNA)genes revealed three distinct clusters without geographic structure,indicating significantly high rates of gene flow.Coalescent theory framework analysis(approximate Bayesian computation model DIYABC and Migrate-N)suggested that divergence of the main intraspecific clusters was the result of hybridization after secondary contact in the Holocene around 0.59 million years ago(Ma).The ratio of mt DNA FST(fixation index)to nu DNA FST was 2.3,thus failing to show male-biased dispersal.Geographic cline analysis showed that a wide hybrid zone was initially established in southwestern China,without significant reproductive isolation but with strong introgression in S.boulengeri,suggesting high hybrid fitness.Furthermore,mt DNA genes exhibited isolation by distance(IBD)while nu DNA genes exhibited significant isolation by environment(IBE).Results suggested that mitonuclear discordance may have initially been caused by geographic isolation,followed by precipitation-mediated hybridization,producing a wide hybrid zone and geographic structure confusion of nu DNA genes in S.boulengeri.This study indicated that complicated historical processes may have led to specific genetic patterns,with a specific climate factor facilitating gene flow in the system.

Crustal structure in Xiaojiang fault zone and its vicinity

Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January of 2005, we present a 2-D P wave velocity structure along the profile. The crustal structure shows remarkable contrasts between the two sides of the Xiaojiang fault zone, although the whole profile is situated within the Yangtze platform. The average P wave velocities of the crust on the west and east sides of the fault zone are 6.21 km/s and 6.32 km/s, respectively, and the crustal thicknesses are 41 km and 45 km, respectively. These results imply that the crust to the east of the Xiaojiang fault zone presents characteristics of crustal structure in a stable platform, while the crust to the west is complicated with a lower velocity zone in middle of the upper crust. The average velocity of 6.21 km/s is lower than the global continental crustal average （6.30 km/s）, indicating that the region is tectonically active. According to the lateral variation of velocity and depth of interfaces （including the Moho）, it is inferred that the Xiaojiang fault zone has cut through the whole crust. It is also deduced that existence of low velocity zone in middle of the upper crust is conducive to the south-southeastern sliding of the Sichuan- Yunnan （Chuan-Dian） rhombus block.

Rock Damage Structure of the South Longmen-Shan Fault in the 2008 M8 Wenchuan Earthquake Viewed with Fault-Zone Trapped Waves and Scientific Drilling

This article is to review results from scientific drilling and fault-zone trapped waves （FZTWs） at the south Longman-Shan fault （LSF） zone that ruptured in the 2008 May 12 M8 Wenchuan earthquake in Sichuan,China.Immediately after the mainshock,two Wenchuan Fault Scientific Drilling （WFSD） boreholes were drilled at WFSD-1 and WFSD-2 sites approximately 400 m and 1 km west of the surface rupture along the Yinxiu-Beichuan fault （YBF）,the middle fault strand of the south LSF zone.Two boreholes met the principal slip of Wenchuan earthquake along the YBF at depths of 589-m and 1230-m,respectively.The slip is accompanied with a 100-200-m-wide zone consisting of fault gouge,breccia,cataclasite and fractures.Close to WFSD-1 site,the nearly-vertical slip of ～4.3-m with a 190-m wide zone of highly fractured rocks restricted to the hanging wall of the YBF was found at the ground surface after the Wenchuan earthquake.A dense linear seismic array was deployed across the surface rupture at this venue to record FZTWs generated by aftershocks.Observations and 3-D finite-difference simulations of FZTWs recorded at this cross-fault array and network stations close to the YBF show a distinct low-velocity zone composed by severely damaged rocks along the south LSF at seismogenic depths.The zone is several hundred meters wide along the principal slip,within which seismic velocities are reduced by ～30-55％ from wall-rock velocities and with the maximum velocity reduction in the ～200-m-wide rupture core zone at shallow depth.The FZTW-inferred geometry and physical properties of the south LSF rupture zone at shallow depth are in general consistent with the results from petrological and structural analyses of cores and well log at WFSD boreholes.We interpret this remarkable low-velocity zone as being a break-down zone during dynamic rupture in the 2008 M8 earthquake.We examined the FZTWS generated by similar earthquakes before and after the 2008 mainshock and observed that seismic velocities within fault core zone was reduced by ～10％ due to severe damage of fault rocks during the M8 mainshock.Scientific drilling and locations of aftershocks generating prominent FZTWs also indicate rupture bifurcation along the YBF and the Anxian-Guangxian fault （AGF）,two strands of the south LSF at shallow depth.A combination of seismic,petrologic and geologic study at the south LSF leads to further understand the relationship between the fault-zone structure and rupture dynamics,and the amplification of ground shaking strength along the low-velocity fault zone due to its waveguide effect.

Crustal structure beneath the Qilian Orogen Zone from multiscale seismic tomography

The Qilian Orogen Zone(QOZ), located in the north margin of the Tibetan Plateau, is the key area for understanding the deformation and dynamics process of Tibet. Numerous geological and geophysical studies have been carried out on the mechanics of the Tibetan Plateau deformation and uplift; however, the detailed structure and deformation style of the Qilian Orogen Zone have remained uncertain due to poor geophysical data coverage and limited resolution power of inversion algorithms. In this study, we analyze the P-wave velocity structure beneath the Qilian Orogen Zone, obtained by applying multi-scale seismic tomography technique to P-wave arrival time data recorded by regional seismic networks. The seismic tomography algorithm used in this study employs sparsity constraints on the wavelet representation of the velocity model via L1-norm regularization. This algorithm can deal efficiently with uneven-sampled volumes, and can obtain multi-scale images of the velocity model. Our results can be summarized as follows:(1) The crustal velocity structure is strongly inhomogeneous and consistent with the surface geological setting. Significant low-velocity anomalies exist in the crust of northeastern Tibet, and slight high-velocity anomalies exist beneath the Qaidam Basin and Alxa terrane.(2)The Qilian Orogen Zone can be divided into two main parts by the Laji Shan Faults: the northwestern part with a low-velocity feature, and the southeastern part with a high-velocity feature at the upper and middle crust.(3) Our tomographic images suggest that northwestern and southeastern Qilian Orogen Zones have undergone different tectonic processes. In the northwest Qilian Orogen Zone, the deformation and growth of the Northern Tibetan Plateau has extended to the Heli Shan and Beida Shan region by northward overthrusting at the upper crust and thickening in the lower crust. We speculate that in the southeast Qilian Orogen Zone the deformation and growth of the Northern Tibet Plateau were of strike-slip style at the upper crust; in the lower crust, the evidence suggests ductile shear extrusion style and active frontage extension to the Alxa terrane.(4) The multi-scale seismic tomography technique provides multiscale analysis and sparse constraints, which has allowed to us obtain stable, high-resolution results.

Internal structures and high-velocity frictional properties of Longmenshan fault zone at Shenxigou activated during the 2008 Wenchuan earthquake

This paper reports internal structures of a wide fault zone at Shenxigou,Dujiangyan,Sichuan province,China,and high-velocity frictional properties of the fault gouge collected near the coseismic slip zone during the 2008 Wenchuan earthquake.Vertical offset and horizontal displacement at the trench site were 2.8 m（NW side up）and 4.8 m（right-lateral）,respectively.The fault zone formed in Triassic sandstone,siltstone,and shale about 500 m away from the Yingxiu-Beichuan fault,a major fault in the Longmenshan fault system.A trench survey across the coseismic fault,and observations of outcrops and drill cores down to a depth of 57 m revealed that the fault zone consists of fault gouge and fault breccia of about0.5 and 250-300 m in widths,respectively,and that the fault strikes N62°E and dips 68° to NW.Quaternary conglomerates were recovered beneath the fault in the drilling,so that the fault moved at least 55 m along the coseismic slip zone,experiencing about 18 events of similar sizes.The fault core is composed of grayish gouge（GG） and blackish gouge（BG） with very complex slip-zone structures.BG contains low-crystalline graphite of about 30 %.High-velocity friction experiments were conducted at normal stresses of 0.6-2.1 MPa and slip rates of 0.1-2.1 m/s.Both GG and BG exhibit dramatic slip weakening at constant high slip rates that can be described as an exponential decay from peak friction coefficient lpto steadystate friction coefficient lssover a slip-weakening distance Dc.Deformation of GG and BG is characterized by overlapped slip-zone structures and development of sharp slickenside surfaces,respectively.Comparison of our data with those reported for other outcrops indicates that the high-velocity frictional properties of the Longmenshan fault zones are quite uniform and the high-velocity weakening must have promoted dynamic rupture propagation during the Wenchuan earthquake.

Analysis of the Ore-Controlling Structure of Ductile Shear Zone Type Gold Deposit in Southern Beishan Area, Gansu, Northwest China

The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.

3-D shear wave velocity structure in the shallow crust of the Tan-Lu fault zone in Lujiang,Anhui,and adjacent areas,and its tectonic implications

The Tan-Lu fault zone is a large NNE-trending fault zone in eastern China.Investigations of the structures of the fault zone and its surrounding areas have attracted much attention.In this study,we used dense-array ambient noise tomography to construct a threedimensional shear wave velocity model of shallow crust in an area about 80km×70km in Lujiang,Anhui Province,eastern China.For approximately one month we collected continuous ambient noise signals recorded by 90 short-period seismographs in the region,and obtained the short-period Rayleigh wave empirical Green's functions between stations by the cross-correlation method;we also extracted 0.5–8 s fundamental mode Rayleigh wave group velocity and phase velocity dispersion curves.Based on the direct surface wave tomography method,we jointly inverted the group velocity and phase velocity dispersion data of all paths and obtained the 3-D shear wave velocity structure in the depth range of 0–5 km.The results revealed important geological structural features of the study area.In the north region,the sedimentary center of the Hefei Basin—the southwestern part of the Chaohu Lake—shows a significant low-velocity anomaly to a depth of at least 5 km.The southwestern and southeastern regions of the array are the eastern margin of the Dabie orogenic belt and the intrusion area of Luzong volcanic rocks,respectively,and both show obvious high-speed anomalies;the sedimentary area within the Tan-Lu fault zone(about 10 km wide)shows low-velocity anomalies.However,the volcanic rock intrusion area in the fault zone is shown as high velocity.Our shallow crustal imaging results reflect the characteristics of different structures in the study area,especially the high-speed intrusive rocks in the Tan-Lu fault zone,which were probably partially derived from the magmatic activity of Luzong volcanic basin.From the Late Cretaceous to Early Tertiary,the Tan-Lu fault zone was in a period of extensional activity;the special stress environment and the fractured fault zone morphology provided conditions for magma in the Luzong volcanic basin to intrude into the Tan-Lu fault zone in the west.Our 3-D model can also provide important information for deep resource exploration and earthquake strong ground motion simulation.

Thermal structure of continental subduction zone: high temperature caused by the removal of the preceding oceanic slab

The thermal structure of the continental subduction zone can be deduced from high-pressure and ultra-high-pressure rock samples or numerical simulation.However,petrological data indicate that the temperature of subducted continental plates is generally higher than that derived from numerical simulation.In this paper,a two-dimensional kinematic model is used to study the thermal structure of continental subduction zones,with or without a preceding oceanic slab.The results show that the removal of the preceding oceanic slab can effectively increase the slab surface temperature of the continental subduction zone in the early stage of subduction.This can sufficiently explain the difference between the cold thermal structure obtained from previous modeling results and the hot thermal structure obtained from rock sample data.

Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review

Alkali-activated slag concrete (AASC) is a new green building material. The amount of CO_(2) produced by AASC is 1/5th of that produced by ordinary Portland cement concrete (OPCC). In addition, AASC promotes the reuse of slag and other wastes and saves resources. Furthermore, the scope of use of slag has been expanded. The progress of the research on the hydration characteristics, microstructure, interfacial transition zone, and pore structure of AASC based on the relevant literatures was analyzed and summarized in this study. The influences of the slag composition, the type and dosage of the alkali activator, and the curing conditions on the hydration characteristics and the microstructure of the AASC were discussed. Relatively few research results on the microstructure of AASC are available, and the relevant conclusions are not completely consistent. Moreover, there are many constraints on the development of AASC (e.g., complex composition of raw materials of slag, large shrinkage deformation, and low fluidity). Therefore, further research is required.

MICROSTRUCTURE TRANSFORMATION IN THE WELDING HEAT AFFECTED ZONE OF 800MPa GRADE ULTRA FINE STRUCTURED STEEL

The transformation behavior and microstructure development in the heat affected zone(HAZ) of 800MPa grade ultra fine structured steel was investigated. It was found thatthe HAZ has intermediate temperature transformation characteristics in a wide rangeof cooling rates, with the bainite sheaves consisting of bainite ferrite plates withoutcarbide precipitation and retained austenite in the fast cooling regime. At relativelyhigh cooling rates, which corresponded to low heat inputs, the hardness of the simulatedHAZ was above that of the base metal. When the cooling rate was below 9℃/s, thewelding HAZ would have an obvious softening. The analysis of transformation ratesin continuous cooling processes was completed by numerical differential method. Theresult indicated that the microstructure transformation rate of the HAZ in 800MPagrade ultra fine structured steel changed sharply to slow speeds when the cooling timet_(8/5) is longer than 7s.

2-D P-wave velocity structure in the mideast segment of Zhangjiakou-Bohai tectonic zone: Anxin-Xianghe-Kuancheng DSS profile

In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction survey was carried out along the profile extending from Anxin county, Hebei Province northeastward to Yanshan Mountains, crossing the Zhangjiakou-Bohai tectonic zone. The 2-D velocity structure of P wave was imaging along the profile. The results show that abnormality exists in the deep structure of the Zhangjiakou-Bohai tectonic zone: The base- ment is significantly depressed, the interfaces and Moho are uplifted, and a strong velocity gradient layer is existed above the Moho that may be dislocated by deep fault. The crust of Huabei basin is thin and low velocity body ex- ists in the crust. The Yanshan Mountains′ crust is thick, the layers in the crust are quite clear and the velocity in the layer is homogeneous. Huabei basin differs from Yanshan Mountains in structure.

The shallow Longmenshan crustal S-velocity structure of the fault zone using ambient noise tomography of a seismic dense array

The Longmenshan fault zone(LMSF),characterized by complex structures and strong seismicity,is located at the junction between the eastern margin of the Tibetan Plateau and the north-western Sichuan basin.Since the Wenchuan earthquake on May 12,2008,abundant studies of the formation mechanism of earthquakes along the LMSF were performed.In this study,a short-period dense seismic array deployed across the LMSF was applied by ambient noise tomography.Fifty-two 3-D seismic instruments were used for data acquisition for 26 days.We calculated the empirical Green's functions(EGFs)between different station-pairs and extracted 776 Rayleigh-wave dispersion curves between 2 and 7 s.And then,we used the direct-inversion method to obtain the fine shallow crustal S-wave velocity structure within 6 km depth in the middle section of the Longmenshan fault zone and nearby areas.Our results show that the sedimentary layer(>5 km)exists in the northwest margin of Sichuan Basin with a low S-wave velocity(~1.5-2.5 km/s)which is much thicker than that beneath the Longmenshan fault zone and the Songpan-Garze block.The high-velocity structures with clear boundaries below the middle of Longmenshan fault zone(~2-4 km)and the Songpan-Garze block(~4.5-6 km)probably reveal the NW-SE distribution patterns of both the Pengguan complex and the high-density belt hidden in the northwest of the Pengguan complex.And the obviously high-velocity anomalies observed at the depth of^1-2 km in the southeastern margin of the Songpan-Garze block can be considered as the Laojungou granites.Our results provide a high-resolution shallow velocity structure for detailed studies of the Longmenshan fault zone.

Crustal Structure and Seismogenic Zone of Cameroon: Integrated Seismic, Geological and Geophysical Data

This study describes the seismo-tectonic evolution of Cameroon. It is noticed that seismic activity is largely related to the Cameroon volcanic line (CVL) and many of the tectonic phenomena follow the previous structural lines. Although the area is that of a relatively low seismicity, the effects of a given earthquake could be considerable. This study combines seismic records, from 1952 to 2002 and from 2005 to 2007, with the integration of existing structural information to better define the seismogenic zones. An important identified cluster of epicenters in S-W defines the first seismic source region where events’ characteristics show a weak seismicity related to volcanic activity. The second seismogenic zone, in the north of Mount Cameroon volcano, illustrates the activity of Central Cameroon Shear Zone (CCSZ) faults;its seismicity is considered weak to moderate with maximum magnitude recorded which is 5.1 Mb. The area of “Sanaga Shear Zone” (SSZ) constitutes the third seismic source region with moderate seismicity in which maximum magnitude recorded is 5.8 Mb;Depth of its faults segments is evaluated at 33 km. The fourth Source Region follows the North boundary of Congo Craton;a characteristic event with magnitude of 6 M allows evaluating fault depth at 33 km. Also three zones define crustal structure: the South Domain with thick crust, the Center Domain characterized by thin crust, active tectonic and volcanic structures and the north domain with shallow Moho.

Integrated Structure and Mineralization Study Using Aero-Magnetic, Aero-Spectrometric and Remote Sensing Data at Esh El-Mallaha Area, Eastern Desert, Egypt

The main scope of this research is to detect geologic structure trends affecting the study area, determine uranium anomalous areas and define alteration zones. Airborne magnetic data were used to detect the geologic structure trends affecting the study area through applying edge detectors such as total horizontal derivative, analytic signal and tilt derivative. The radio-spectrometry data and Landsat image data were used in determining the uranium anomalous areas and alteration zones. The integration between geology, magnetic and Landsat image was applied through constructing lineaments density map for the three data sets resulting in the leading of NW-SE trend all over the area. This integration makes clear that the basement (Red Sea hills), Esh El-mallaha range and G. Zeit are limiting two large basins (West Mallaha and Zeit). In addition, the main areas of uranium enrichment (Duwi formation at Esh El-Mallaha range) are found to be well related to alteration zones.

Structure and Natural Regeneration Status of Woody Plants of Berbere Afromontane Moist Forest, Bale Zone, South East Ethiopia;Implication to Biodiversity Conservation

The study was conducted on Berbere Forest in Bale Zone of Oromia Regional State, south east of Ethiopia with the objective of determining the structural analysis and natural regeneration status of the forest. Systematic sampling method was used to collect vegetation data. Seventy two nest quadrat sizes of 400 m2 (20 m × 20 m) for trees and shrubs were used. Within the main quadrat, two opposite side of each sub-quadrat of 25 m2 (5 m × 5 m) for sapling, 4 m2 (2 m × 2 m) for seedling of woody plants. The diameter and height were measured for all individual trees and shrubs having DBH (Diameter at Breast Height) ≥ 10 cm thick and ≥2 m height by using a diameter tape or caliper and clinometer respectively. For description and analysis of vegetation structure Diameter at Breast Height (DBH), basal area, tree density, height, frequency and important value index were used. Structural analysis of some selected tree species was revealed four different population patterns (bell shaped, inverted J-shaped, irregular and U-shaped). The total basal area of Berbere forest was 87.49 m2/ha, but most of the basal area was contributed by few large sized Moraceae family (Ficus vasta, Ficus ovate and Ficus thonningii) plant species. Analysis of regeneration status of woody plants in the forest showed 37.09% trees/shrubs species exhibited “good”, 19.35% showed “fair”, 6.45% showed “poor” and 25.81% trees/shrubs species were “not regenerating” at all and 11.29% trees/shrubs species were available only in sapling or seedling stage. Studies on the structure and regeneration of the forest indicated that there are species that require urgent conservation measures. Therefore, based on the results of this study, we recommended detail regenerating studies of seed bank in relation to various environmental factors such as soil type and properties.

Crust-mantle structure feature and the seismic activity of the main tectonic units in the North Tanlu fault zone

Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are obvious difference at both sides of the North Tanlu fault zone. The fault activity and segmentation are closely related with abruptly change zone of the crust-upper mantle structure. There is a clear mirror image relationship between the big geomorphic shape and asthenosphere undulate, the former restricts tectonic stability and tectonic style of dif- ferent crustal units. The significantly strengthening seismicity of north set and south set in the North Tanlu fault zone just correspond to the low-velocity and high conductivity layer of crust-upper mantle. In the North Tanlu fault zone, the main controlling structure of the mid-strong seismic generally consists of the active fault sectors, whose crust-mantle structure is more complicated in rigidity massif.

Determination of the Fish Community Structure of an Intertidal Rocky Zone of the Pacific Coast of Baja California Sur

The intertidal zone (also known as seashore) are transition areas between land and sea, that are greatly influenced by the tide cycle, therefore, environmental parameters, such as temperature and salinity, oscillate according to the periods in which these areas are exposed to air. Intertidal zones are highly diverse, which makes them key ecosystems for the development of sea life (both flora and fauna) exposed to drastic environmental change. The 59 visual censuses campaigns were carried out during the full moon of each month from 2015 to 2019. Temperature, salinity and dissolved oxygen were recorded during each visual census and showed variations between years. Temperature showed two distinct seasons, warm and cold. A total of 14,995 organisms were recorded, belonging to 30 species, 28 genera, 15 families, five orders and one class. Ecological indices like species richness (SR), Shannon-Wiener’s diversity (H') and Fisher’s alpha (α-Fisher) showed significant differences between years, 2015 and 2016 recorded as the most diverse years, while the lowest values were recorded in 2019. Therefore, fish communities of tide pools showed to be highly diverse, with 30 species recording similar relative abundances, and according to the BVI, only 11 species were dominant. Spatio-temporal variations of temperature, salinity and dissolved oxygen were highly correlated to changes in fish community structure, and the dominance of certain species, which are of great importance for the structure and dynamic of the tide pool communities. Therefore, the aim of the present study was to determine the fish community structure of tide pools during the low tide in the intertidal zone of a locality known as El Faro, on the west coast of La Paz, B. C. S., Mexico.

Analysis of Interf acial Zone Properties and Permeability of Concrete in Underground Structure

Chloride diffusion coefficient and water penetration depth of 3 types concrete were studied. The experimental results show that the concrete permeability decreases itself in the order as follow:pure portland cement concrete(C0), concrete added with fly ash(C1), concrete added with both fly ash and silica fume(C2). SEM and microhardness analyses show that the properties of interfacial zone are significantly influenced by silica fume. With the improvement of interfacial zone properties, the permeability especially the Chloride ion diffusivity of concrete significantly decreases.