A fully nonlinear numerical wave tank (NWT) has been simulated by use of a three-dimensional higher order boundary element method (HOBEM) in the time domain. Within the frame of potential flow and the adoption of simp...A fully nonlinear numerical wave tank (NWT) has been simulated by use of a three-dimensional higher order boundary element method (HOBEM) in the time domain. Within the frame of potential flow and the adoption of simply Rankine source, the resulting boundary integral equation is repeatedly solved at each time step and the fully nonlinear free surface boundary conditions are integrated with time to update its position and boundary values. A smooth technique is also adopted in order to eliminate the possible saw-tooth numerical instabilities. The incident wave at the uptank is given as theoretical wave in this paper. The outgoing waves are absorbed inside a damping zone by spatially varying artificial damping on the free surface at the wave tank end. The numerical results show that the NWT developed by these approaches has a high accuracy and good numerical stability.展开更多
Based on the time-domain higher-order boundary element method(HOBEM), a two-dimensional numerical wave flume is developed to investigate solitary wave interaction with two rectangular boxes with a narrow gap.In the nu...Based on the time-domain higher-order boundary element method(HOBEM), a two-dimensional numerical wave flume is developed to investigate solitary wave interaction with two rectangular boxes with a narrow gap.In the numerical model, the fully nonlinear boundary conditions are satisfied on the free surface, the mixed Eulerian-Lagrangian method is adopted to track the transient water surface and the fourth-order Runga-Kutta method is used to predict the velocity potential and wave elevation on the free surface. The acceleration potential technique is used to compute the transient wave forces along the wetted object surface. A piston-type wavemaker is used to generate solitary waves. The proposed model is validated by comparing the simulated wave run-up and the wave loads with the published experimental and numerical results of the reflection of a solitary wave from a vertical wall. Then, numerical experiments are performed to study the effects of the narrow gap and the size of each box on the wave run-ups at the two sides of the two-box system and in the narrow gap between two boxes, and the wave loads on the two boxes. The interaction between double solitary waves with a time interval between them with a two-box system is also investigated.展开更多
A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary c...A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.展开更多
A higher-order finite-difference time-domain（HO-FDTD） in the spherical coordinate is presented in this paper. The stability and dispersion properties of the proposed scheme are investigated and an air-filled spheric...A higher-order finite-difference time-domain（HO-FDTD） in the spherical coordinate is presented in this paper. The stability and dispersion properties of the proposed scheme are investigated and an air-filled spherical resonator is modeled in order to demonstrate the advantage of this scheme over the finite-difference time-domain（FDTD） and the multiresolution time-domain（MRTD） schemes with respect to memory requirements and CPU time. Moreover, the Berenger＇s perfectly matched layer（PML） is derived for the spherical HO-FDTD grids, and the numerical results validate the efficiency of the PML.展开更多
In this paper,strategies are provided for a powerful numerical manifold method(NMM)with h and p refinement in analyses of elasticity and elasto-plasticity.The new NMM is based on the concept of the independent cover,w...In this paper,strategies are provided for a powerful numerical manifold method(NMM)with h and p refinement in analyses of elasticity and elasto-plasticity.The new NMM is based on the concept of the independent cover,which gets rid of NMM's important defect of rank deficiency when using higher-order local approximation functions.Several techniques are presented.In terms of mesh generation,a relationship between the quadtree structure and the mathematical mesh is established to allow a robust h-refinement.As to the condition number,a scaling based on the physical patch is much better than the classical scaling based on the mathematical patch;an overlapping width of 1%–10%can ensure a good condition number for 2nd,3rd,and 4th order local approximation functions;the small element issue can be overcome after the local approximation on small patch is replaced by that on a regular patch.On numerical accuracy,local approximation using complete polynomials is necessary for the optimal convergence rate.Two issues that may damage the convergence rate should be prevented.The first is to approximate the curved boundary of a higher-order element by overly few straight lines,and the second is excessive overlapping width.Finally,several refinement strategies are verified by numerical examples.展开更多
A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also...A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also further extended to handle the boundary conditions of plates. The computational convergence was studied, and the numerical results were obtained for different grid spacings and compared with the existing results. The results show that the DQ method is fairly reliable and effective.展开更多
文摘A fully nonlinear numerical wave tank (NWT) has been simulated by use of a three-dimensional higher order boundary element method (HOBEM) in the time domain. Within the frame of potential flow and the adoption of simply Rankine source, the resulting boundary integral equation is repeatedly solved at each time step and the fully nonlinear free surface boundary conditions are integrated with time to update its position and boundary values. A smooth technique is also adopted in order to eliminate the possible saw-tooth numerical instabilities. The incident wave at the uptank is given as theoretical wave in this paper. The outgoing waves are absorbed inside a damping zone by spatially varying artificial damping on the free surface at the wave tank end. The numerical results show that the NWT developed by these approaches has a high accuracy and good numerical stability.
基金The National Natural Science Foundation of China under contract Nos 51679036,51222902 and 51490672the Program for New Century Excellent Talents in University under contract No.NCET-13-0076
文摘Based on the time-domain higher-order boundary element method(HOBEM), a two-dimensional numerical wave flume is developed to investigate solitary wave interaction with two rectangular boxes with a narrow gap.In the numerical model, the fully nonlinear boundary conditions are satisfied on the free surface, the mixed Eulerian-Lagrangian method is adopted to track the transient water surface and the fourth-order Runga-Kutta method is used to predict the velocity potential and wave elevation on the free surface. The acceleration potential technique is used to compute the transient wave forces along the wetted object surface. A piston-type wavemaker is used to generate solitary waves. The proposed model is validated by comparing the simulated wave run-up and the wave loads with the published experimental and numerical results of the reflection of a solitary wave from a vertical wall. Then, numerical experiments are performed to study the effects of the narrow gap and the size of each box on the wave run-ups at the two sides of the two-box system and in the narrow gap between two boxes, and the wave loads on the two boxes. The interaction between double solitary waves with a time interval between them with a two-box system is also investigated.
基金The National Natural Science Foundations of China under contract Nos 50709005 and 50639030the Program for Changjiang Scholars and Innovative Research Teams of Universities and Colleges of China under contract No. IRT0420the National High Tech Research and Development Program of China under contract No.2006AA09A109-3
文摘A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61301063 and 41305017)
文摘A higher-order finite-difference time-domain（HO-FDTD） in the spherical coordinate is presented in this paper. The stability and dispersion properties of the proposed scheme are investigated and an air-filled spherical resonator is modeled in order to demonstrate the advantage of this scheme over the finite-difference time-domain（FDTD） and the multiresolution time-domain（MRTD） schemes with respect to memory requirements and CPU time. Moreover, the Berenger＇s perfectly matched layer（PML） is derived for the spherical HO-FDTD grids, and the numerical results validate the efficiency of the PML.
基金supported by the National Natural Science Foundation of China(Grant Nos.52130905 and 52079002)。
文摘In this paper,strategies are provided for a powerful numerical manifold method(NMM)with h and p refinement in analyses of elasticity and elasto-plasticity.The new NMM is based on the concept of the independent cover,which gets rid of NMM's important defect of rank deficiency when using higher-order local approximation functions.Several techniques are presented.In terms of mesh generation,a relationship between the quadtree structure and the mathematical mesh is established to allow a robust h-refinement.As to the condition number,a scaling based on the physical patch is much better than the classical scaling based on the mathematical patch;an overlapping width of 1%–10%can ensure a good condition number for 2nd,3rd,and 4th order local approximation functions;the small element issue can be overcome after the local approximation on small patch is replaced by that on a regular patch.On numerical accuracy,local approximation using complete polynomials is necessary for the optimal convergence rate.Two issues that may damage the convergence rate should be prevented.The first is to approximate the curved boundary of a higher-order element by overly few straight lines,and the second is excessive overlapping width.Finally,several refinement strategies are verified by numerical examples.
基金key Project of the Municipal Commission of Science and Technology of Shanghai
文摘A differential quadrature (DQ) method for orthotropic plates was proposed based on Reddy' s theory of plates with the effects of the higher-order transverse shear deformations. Wang-Bert's DQ approach was also further extended to handle the boundary conditions of plates. The computational convergence was studied, and the numerical results were obtained for different grid spacings and compared with the existing results. The results show that the DQ method is fairly reliable and effective.
