Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular cup.The acetabular cup and the outer liner were constructed of 316L stainless steel.At the same time,the inner liner was made of ultra-high-molecular-weight polyethylene(UHMWPE).As this new dual-mobility artificial hip joint has not been researched extensively,more tribological research is needed to predict wear.The thickness of the inner liner is a significant component to consider when calculating the contact pressure.AIM To make use of finite element analysis to gain a better understanding of the contact behavior in various inner liner thicknesses on a new model of a dual-mobility artificial hip joint,with the ultimate objective of determining the inner liner thickness that was most suitable for this particular type of dual-mobility artificial hip joint.METHODS In this study,the size of the femoral head was compared between two diameters(28 mm and 36 mm)and eight inner liner thicknesses ranging from 5 mm to 12 mm.Using the finite element method,the contact parameters,including the maximum contact pressure and contact area,have been evaluated in light of the Hertzian contact theory.The simulation was performed statically with dissipated energy and asymmetric behavior.The types of interaction were surface-to-surface contact and normal contact behavior.RESULTS The maximum contact pressures in the inner liner(UHMWPE)at a head diameter of 28 mm and 36 mm are between 3.7-13.5 MPa and 2.7-10.4 MPa,respectively.The maximum von Mises of the inner liner,outer liner,and acetabular cup are 2.4–11.4 MPa,15.7–44.3 MPa,and 3.7–12.6 MPa,respectively,for 28 mm head.Then the maximum von Mises stresses of the 36 mm head are 1.9-8.9 MPa for the inner liner,9.9-32.8 MPa for the outer liner,and 2.6-9.9 MPa for the acetabular cup.A head with a diameter of 28 mm should have an inner liner with a thickness of 12 mm.Whereas the head diameter was 36 mm,an inner liner thickness of 8 mm was suitable.CONCLUSION The contact pressures and von Mises stresses generated during this research can potentially be exploited in estimating the wear of dual-mobility artificial hip joints in general.Contact pressure and von Mises stress reduce with an increasing head diameter and inner liner’s thickness.Present findings would become one of the references for orthopedic surgery for choosing suitable bearing geometric parameter of hip implant.

Effect of weight-adjusted antimicrobial antibiotic prophylaxis on postoperative dosage and surgical site infection incidence in total joint arthroplasty

Surgical site infections(SSI)following total joint arthroplasty pose a significant concern for both providers and patients across the globe.Currently,administration of antimicrobial antibiotic prophylaxis is used throughout the world to reduce the incidence of SSI.However,the correct dosage and frequency of administration remains debatable.In this editorial,we emphasized the determination of the effect of administration of weight-adjusted antimicrobial antibiotic prophylaxis regime on the incidence of SSI and postoperative dosage reduction compared to the conventionally used regime during total joint arthroplasty.The results demonstrated similar efficacy between both regimes with respect to the incidence of SSI.In addition,weight-adjustment led to reduced postoperative dosage and has the potential to reduce chances of achieving lower therapeutic concentration,drug resistance,drug toxicity,and costs.

Two-stage revision arthroplasty for coagulase-negative staphylococcal periprosthetic joint infection of the hip and knee

BACKGROUND Periprosthetic joint infections(PJIs)are frequently caused by coagulase-negative Staphylococci(CoNS),which is known to be a hard-to-treat microorganism.Antibiotic resistance among causative pathogens of PJI is increasing.Two-stage revision is the favoured treatment for chronic CoNS infection of a hip or knee prosthesis.We hypothesised that the infection eradication rate of our treatment protocol for two-stage revision surgery for CoNS PJI of the hip and knee would be comparable to eradication rates described in the literature.AIM To evaluate the infection eradication rate of two-stage revision arthroplasty for PJI caused by CoNS.METHODS All patients treated with two-stage revision of a hip or knee prosthesis were retrospectively included.Patients with CoNS infection were included in the study,including polymicrobial cases.Primary outcome was infection eradication at final follow-up.RESULTS Forty-four patients were included in the study.Twenty-nine patients were treated for PJI of the hip and fifteen for PJI of the knee.At final follow-up after a mean of 37 mo,recurrent or persistent infection was present in eleven patients.CONCLUSION PJI with CoNS can be a difficult to treat infection due to increasing antibiotic resistance.Infection eradication rate of 70%-80%may be achieved.

Physiologic postoperative presepsin kinetics following primary cementless total hip arthroplasty:A prospective observational study

BACKGROUND Presepsin is an emerging biomarker in the diagnosis of sepsis.In the field of orthopaedics,it could be useful in diagnosing and managing periprosthetic joint infections.AIM To define the normal postoperative presepsin plasmatic curve,in patients undergoing primary cementless total hip arthroplasty(THA).METHODS Patients undergoing primary cementless THA at our Institute were recruited.Inclusion criteria were:Primary osteoarthritis of the hip;urinary catheter time of permanence<24 h;peripheral venous cannulation time of permanence<24 h;no postoperative homologous blood transfusion administration and hospital stay≤8 d.Exclusion criteria were:The presence of other articular prosthetic replacement or bone fixation devices;chronic inflammatory diseases;chronic kidney diseases;history of recurrent infections or malignant neoplasms;previous surgery in the preceding 12 mo;diabetes mellitus;immunosuppressive drug or corticosteroid assumption.All the patients received the same antibiotic prophylaxis.All the THA were performed by the same surgical and anaesthesia team;total operative time was defined as the time taken from skin incision to completion of skin closure.At enrollment,anthropometric data,smocking status,osteoarthritis stage according to Kellgren and Lawrence,Harris Hip Score,drugs assumption and comorbidities were recorded.All the patients underwent serial blood tests,including complete blood count,presepsin(PS)and C-reactive protein 24 h before arthroplasty and at 24,48,72 and 96 h postoperatively and at 3,6 and 12-mo follow-up.RESULTS A total of 96 patients(51 female;45 male;mean age=65.74±5.58)were recruited.The mean PS values were:137.54 pg/mL at baseline,192.08 pg/mL at 24 h post-op;254.85 pg/mL at 48 h post-op;259 pg/mL at 72 h post-op;248.6 pg/mL at 96-h post-op;140.52 pg/mL at 3-mo follow-up;135.55 pg/mL at 6-mo follow-up and 130.11 pg/mL at 12-mo follow-up.In two patients(2.08%)a soft-tissue infection was observed;in these patients,higher levels(>350 pg/mL)were recorded at 3-mo follow-up.CONCLUSION The dosage of plasmatic PS concentration is highly recommended in patients undergoing THA before surgery to exclude the presence of an unknown infection.The PS plasmatic concentration should be also assessed at 72 h postoperatively,evaluate the maximum postoperative PS value,and at 96 h post-operatively when a decrease of presepsin should be found.The lack of a presepsin decrease at 96 h post-operatively could be a predictive factor of infection.

Risk of methicillin-resistant staphylococcus aureus prosthetic joint infection in elective total hip and knee arthroplasty following eradication therapy

BACKGROUND Prosthetic joint infection(PJI)is a devastating complication requiring prolonged treatment and multiple operations,leading to significant morbidity for the patient.Patients are routinely tested for methicillin-resistant staphylococcus aureus(MRSA)colonisation.MRSA positive patients are given eradication therapy.We hypothesise that patients who are MRSA positive pre-operatively,have increased risk of developing PJI.AIM To identify deep wound infection(PJI)rates in patients who are colonised MRSA positive compared with those who are not colonised;and long term clinical and radiological outcomes.METHODS All patients who underwent total hip and knee replacements(THR/TKR)between December 2009 and December 2019 were identified.Patients who were also identified as being MRSA positive at pre-operative assessment were then selected.Confirmation of prescribing eradication treatment was recorded.Patient records,including consultation letters,operation notes and microbiology results were reviewed retrospectively.Comparison of outcomes for each MRSA positive patient was made with 2 MRSA negative patients undergoing the same operation of a similar age by the same consultant.RESULTS Screening identified 42 knee and 32 hip arthroplasty patients as MRSA positive,84 MRSA negative knee and 64 hip patients were reviewed.Patients were matched with medical co-morbidities in each group.Mean follow up was 5 years.PJI was identified in 4/32(12.5%)of THR MRSA positive and 3/42(7%)of TKR patients.All patients had PJI within one year of surgery.CONCLUSION MRSA positive patients are given eradication therapy routinely.However,no confirmation of eradication is sought.Patients who have MRSA colonisation preoperatively,in our study had a significantly increased risk of PJI,when compared to negative patients.We would recommend establishing true eradication after treatment prior to arthroplasty.

Good accuracy of the alpha-defensin lateral flow test for hip periprosthetic joint infection: A pilot study in a retrospective cohort of 52 patients

BACKGROUND The alpha-defensin lateral flow(ADLF)test is a new diagnostic tool for periprosthetic joint infection(PJI).Test accuracy for combined cohorts of hip and knee PJI has been reported to be good.AIM To assess the accuracy of the ADLF test for hip PJI,and to compare three different diagnostic criteria for PJI.METHODS A cohort of 52 patients was identified,with a painful or poor-functioning total hip-or hemi-arthroplasty,that underwent aspiration and a subsequent ADLF test.PJI was diagnosed with Musculoskeletal Infection Society(MSIS)criteria,and sensitivity,specificity,overall accuracy,positive predictive value and negative predictive value were calculated.Furthermore,test specifics were compared with the European Bone and Joint Infection Society(EBJIS)and 2018 International Consensus Meeting(ICM)criteria for PJI.RESULTS Using MSIS criteria,sensitivity was 100%(CI:54%-100%)and specificity was 89%(CI:76%-96%).Six true positives and 5 false positives were found,including one case of metallosis.Using EBJIS criteria,more PJIs were found(11 vs 6),sensitivity was lower(71%,CI:42%-92%)and specificity was higher(97%,CI:86%-100%),with 4 false negatives and one false positive result.Using 2018 ICM criteria,sensitivity was 91%(62%-100%)and specificity 100%(91%-100%).The results in this cohort are comparable to previous studies.CONCLUSION Overall test accuracy of the ADLF test was good in this cohort,with a sensitivity of 100%and specificity of 89%.Using different PJI definition criteria,sensitivity and specificity changed slightly but overall accuracy remained around 90%.Using the ADLF test in metallosis cases can result in false positive results and should be performed with caution.

Can periprosthetic hip joint infections be successfully managed by debridement and prosthesis retention?

To evaluate the current literature about how successfully periprosthetic hip joint infections can be managed by debridement and prosthesis retention.A literature search was performed through Pub Med until September 2013.Search terms were"DAIR(debridement,antibiotics,irrigation,and retention)"alone and in combination with"hip"as well as"hip infection+prosthesis retention".A total of 11 studies reporting on 292 cases could be identified.Five different treatment modalities have been described with varying success rates(debridement-21%infection eradication rate;debridement+lavage-75%infection eradication rate;debridement,lavage,with change of modular prosthesis components-70.4%infection eradication rate;debridement,lavage,change of modular prosthesis components+vacuum-assisted closure-92.8%infection eradication rate;acetabular cup removal+spacer head onto retained stem-89.6%infection eradication rate).With regard to the postoperative antibiotic therapy,no general consensus could be drawn from the available data.Debridement,antibiotic therapy,irrigation,and prosthesis retention is an acceptable solution in the management of early and acute hematogenous periprosthetic hip joint infections.The current literature does not allow for generalization of conclusions with regard to thebest treatment modality.A large,multi-center study is required for identification of the optimal treatment of these infections.

Hip joint center localisation: A biomechanical application to hip arthroplasty population

AIM: To determine hip joint center(HJC) location on hip arthroplasty population comparing predictive and functional approaches with radiographic measurements.METHODS: The distance between the HJC and the mid-pelvis was calculated and compared between the three approaches. The localisation error between the predictive and functional approach was compared using the radiographic measurements as the reference. The operated leg was compared to the non-operated leg.RESULTS: A significant difference was found for the distance between the HJC and the mid-pelvis when comparing the predictive and functional method. The functional method leads to fewer errors. A statistical difference was found for the localization error between the predictive and functional method. The functional method is twice more precise.CONCLUSION: Although being more individualized, the functional method improves HJC localization and should be used in three-dimensional gait analysis.

A Biomimetic Hip Joint Simulator and its Application in in vitro Study of the Integrity of Replacement Cemented Hip

A biomimetic hip joint simulator that can be used to evaluate the outcome of the cemented total hip replacement has been designed, manufactured and evaluated. The simulator produces motion in the extension/flexion plane, with a socket to rotate internal/externally. At the same time a dynamic loading cycle is applied. A validation test was performed on a cemented femoral stem within a novel composite femur. The hone quality has a strong effect on the stem migration and on the integrity of the interfaces. The migration of the stem is a combination of 3-D translation and rotation of the stem. Under the same loading conditions, weak bone allows more stem migration than strong bone. There is a great decrease in the strength of the stem-cement interface after the dynamic test, and the weak bone composite exhibited a greater reduction in interfacial strength than the strong bone composite. The decrease of the interfacial strength indicates that the primary bonding between the stem and the cement mantle had deteriorated and the integrity of stem-cement interface was damaged. The study demonstrates the value of using a hip joint simulator to investigate stem migration and interface integrity within the cemented hip replacement, suggesting that method can be used for in vitro evaluation of the biomaterials used in the cemented hip replacements.

Dynamic knee valgus kinematics and their relationship to pain in women with patellofemoral pain compared to women with chronic hip joint pain

Background:Dynamic knee valgus(DKV)is an abnormal movement pattern visually characterized by excessive medial movement of the lower extremity during weight bearing.Differences in hip and knee kinematic components of DKV may explain the emergence of different pain problems in people who exhibit the same observed movement impairment.Using a secondary analysis of exiting data sets,we sought to determine whether hip and knee frontal and transverse plane angles during a functional task differed between women with patellofemoral pain and women with chronic hip joint pain and the relationship between joint-specific kinematics and pain in these 2 pain populations.Methods:In the original studies,3-dimensional hip and knee kinematics during a single-limb squat were obtained in 20 women with patellofemoral pain and 14 women with chronic hip joint pain who demonstrated visually classified DKV.Pain intensity during the squat was assessed in both groups.For the secondary analysis,kinematic data were compared between pain groups using their respective control groups as a reference.Within each pain group,correlation coefficients were used to determine the relationship between kinematics and pain during the squat.Results:Hip adduction and contralateral pelvic drop were greater in those with chronic hip joint pain compared to those with patellofemoral pain(effect sizes ≥0.40).Greater knee external rotation(r= 0.47,p= 0.04)was correlated with greater knee pain in those with patellofemoral pain,while greater hip adduction(r = 0.53,p = 0.05)and greater hip internal rotation(r = 0.55,p = 0.04)were correlated with greater hip pain in those with chronic hip joint pain.Conclusion:Hip frontal plane motion was greater in those with chronic hip joint pain compared to those with patellofemoral pain.In both groups,greater abnormal movement at the respective joint(e.g.,knee external rotation in the patellofemoral pain group and hip adduction and internal rotation in the chronic hip joint pain group)was associated with greater pain at that joint during a single-limb squat.

Chromium Content in the Human Hip Joint Tissues

Objective Chromium has many important functions in the human body. For the osseous tissue, its role has not been clearly defined. This study was aimed at determining chromium content in hip joint tissues. Methods A total of 91 hip joint samples were taken in this study, including 66 from females and 25 from males. The sample tissues were separated according to their anatomical parts. The chromium content was determined by the AAS method. The statistical analysis was performed with U Mann-Whitney＇s non-parametric test, P〈0.05. Results The overall chromium content in tissues of the hip joint in the study subjects was as follows： 5.73 μg/g in the articular cartilage, 5.33 μ/g in the cortical bone, 27.86 μ/g in the cancellous bone, 5.95 μg/8 in the fragment of the cancellous bone from the intertrochanteric region, and 2.28 μ/g in the joint capsule. The chromium contents were observed in 2 group patients, it was 7.04 μ/g in people with osteoarthritis and 22.59 μ/g in people with fractures. Conclusion The observed chromium content was highest in the cancellous bone and the lowest in the joint capsule. Chromium content was significantly different between the people with hip joint osteoarthritis and the people with femoral neck fractures.

Jumbo cup in hip joint renovation may cause the center of rotation to increase

BACKGROUND Utilizing the large jumbo cup in revision total hip arthroplasty is an effective approach to cure many lacunar and segmental peripheral bone defects.However,with the use of the jumbo cup,the center of the hip joint may become elevated relative to the primary acetabulum,and the diameter of the large cup is greater.AIM To study the height and the significance of the elevation of the hip joint center.METHODS Eighty-eight patients matched the criteria for this condition and were included in the study.The center height of the hip joint was measured relative to the opposite normal hip joint.The diameter of the jumbo cup was measured and checked according to operation notes,and the diameter of the jumbo cup was measured with a prosthesis label.Then,the horizontal and vertical centers of rotation were measured on the surgical side and opposite side.The average center height of the hip joint on the renovated side and the opposite side and the position of the hip cup relative to the teardrop were compared using a paired t-test.RESULTS Radiometric analysis showed that the average hip joint center was elevated by 7.6 mm.The rotational center height delta of the renovated hip was 7.6±5.6 mm,and there was an obvious difference between the two groups(P=0.00).The difference in horizontal distance was 0.5±5.1 mm(-11.5-14.0 mm),and there was no obvious difference between the two groups(P=0.38).According to the foreign standard,the rotational center height delta of the renovated hip was 7.5±6.2 mm,and there was a significant difference between the two groups(P=0.00).There was no obvious difference between the domestic and foreign standards(P>0.05)between the two groups.CONCLUSION The application of the jumbo cup elevates the rotational center of the hip joint,but it is feasible and effective to use the jumbo cup.

Use of Dental Inlay for Treatment of Hip Joint Dysregulation: A Case Report

The purpose of this study was to demonstrate the improvement of hip joint dysregulation, including pain (coxalgia), tension, and restriction of joint mobility, using a dental gold alloy inlay. The subject was a 63-year-old man who was suffering from the abovementioned symptoms for several months. On placement of the gold alloy inlay on his chest, the joint flexibility was observed to increase, and the severity of the abovementioned symptoms decreased. When the inlay was placed in his tooth, the flexibility of the joint further increased, and all other symptoms disappeared. No side effects were observed, and the prognosis was good. We believe that these effects may be explained using the electromagnetic waves emitted by the inlay and by the restoration of biting conditions. Future multidisciplinary research focusing on possible underlying mechanisms regarding the relation between electromagnetic waves and dentistry is necessary.

Hip Joint Osteoarthritis Pain Sources and Control

Hip joint osteoarthritis, a widespread disabling disease with no known cause, produces considerable bouts of intractable pain as a result of multiple disease associated problems. This paper examines some sources of osteoarthritic hip joint pain, a poorly understood topic at best. Presented in three parts are data retrieved from several sources, including animal models. It is concluded that to improve the effectiveness of treatments designed to minimize hip osteoarthritis pain, a better understanding of the diverse origins of hip joint pain, and hip joint neurology, may permit the development of more precise as well as targeted pain strategies.

Leg-length equalization for total hip joint replacement patients

Objective To investigate the methods to maintain leg equalization for patients undergoing primary total hip joint replacement. Methods 40 patients,45 hips with various diseases were treated by total hip joint replacement from Jan 2000 to Sep 2001.Before operation, the perpendicular length from center of femoral head to the summit of great tuberosity and the tip of less tuberosity to the line of bilateral ischial tuberosity were measured; the length from anterior superior iliac spine to medial malleolus were measured at same time.Leg length was decided and corrected according to these lines. Results Before operation, shortening of limbs were presented in 39 hips, 1 to 4 cm, average 2.4 cm.After operation, discrepancy of both legs was 0～0.8 cm.Apparent limps were not observed in all patients. Conclusion This measurement is a useful method to maintain and recover leg length in total hip joint replacement.

ANALYSIS AND RESEARCH OF COMPUTER-AIDED MODEL OF HIP JOINT BASED ON REVERSE ENGINEERING

Former research work about the modeling of hip joint focus on the uppersegment of femoral, and assumes the acetabulum cup is sphere concave, and the acetabulum prosthesesis semisphere. A method of acquiring the point data on the surface of the hipbone using the reverseengineering technology is presented. After analyzing the acetabulum surface fitting error, arotation ellipsoid CAD model is applied to fit the acetabulum surface, and then optimizationtechnique is used to find the geometric parameters of the model. The fitting error between thesphere and rotation ellipsoid is compared and gets the result that the fitting error of rotationellipsoid is smaller than sphere, and the rotation ellipsoid can describe the shape of theacetabulum better.

The Developmentand Clinical Application of Acoustical Technique in Hip Joint

A non- invasive acoustical system was developed for the measurement of transmission properties of acoustic waves in the hip joints.The instrumentation consisted of three sub- system s. An excitation system employed a vibratory force at the sacrum of the test subjects.A transduction system included a pair of identical microphones installed in the tubes of two stethoscopes,which were placed at the greater trochanters on both sides for picking up the acoustical signals transm it- ted across the hip joints.The data acquisition and analysis system was a portable signal analyzer with a program of dual channel digital filter for m easuring the power of acoustical signal in 1/ 3- oc- tave frequency bands.2 7normal adults,2 0 normal pre- school children and 4 0 norm al neonates were random ly selected for testing.Coherence function (CF) and discrepancy(D) was measured during the testing.Results from the three groups showed that there was a high coherence of the signals (CF>0 .9) and a sm all discrepancy(D<3d B) between bilateral hips in the frequency range of2 0 0— 315 Hz.For normal neonates,there was a wider frequency range of16 0 - 315 Hz in which the acoustical signals m aintained a high coherence (CF>0 .93) and a smaller discrepancy (D <2 d B) was observed.This study showed that the development of the acoustical technique pro- vided a practical m ethod with objective parameters.The results obtained in this study can offer a baseline for further investigation of hip disorders particularly those related to structural abnorm ali- ties of the hip.

A TETRACYCLINE LABELING STUDY OF SUBCHONDRAL BONE TISSUES IN OSTEOARTHRITIC HIP JOINT

Seven female patients (mean age of 56 years) with advanced hip joint osteoarthritis underwent total hip replacement. Four days before operation they were given oral tetracycline for two days. During operation specimens were taken from the white articular cartilage, the yellowish articular cartilage and the ivory bone together with their subchondral bone tissues. The undecalcified specimens were cut into 10 μm sections and observed under the fluorescence microscope. In all the specimens the following findings could be observed. 1. The osteoarthritic articular cartilage became thinner, with uneven surface and fissures. 2. The superficial and deep surfaces and the central part of the subchondral bone plate showed bright golden yellow fluorescence. It reflected extensive new bone formation. 3. The subchondral bone trabeculae also revealed bright golden yellow fluorescence on their peripheral borders, so trabeculae turned thicker obviously. 4. The marrow tissues between the bone trabeculae exhibited particulate or spherical bright golden yellow fluorescence, reflecting new bone formation in the marrow. The particulate and spherical bright golden yellow fluorescent materials might aggregate, enlarge and merge into large piece of new bone and they also fused with the neighbouring bone trabeculae. The aforementioned changes in the structure of the subchondral bone tissues increased greatly the mass in the osteoarthritic femoral head.

Analysis of Proprioception of Hip Joint in Total Hip Arthroplasty

Introduction: The instability of the joint is classified roughly into mechanical and functional. It is reported that the postoperative dislocation often occurs by the posterior approach of the THA and may be caused by functionality instability due to the injury of the periarticular soft tissue. We analyzed the joint position sense of the hip according to an approach of the THA and examined effect to give postoperative dislocation. Materials & Methods: 92 patients (184 hip joints) who received THA in our hospital were selected in the study. Cases in which position sensation measurements were insufficient were excluded. As for the classification, the posterior approach (PL groups) was 39 hips, anterolateral approach (AL groups) was 30 hips, and control group was 37 hips. Results: There was no significant difference between the AL group and PL group in the absolute reproduction angle error score (ARAES). The relative reproduction angle error scores (RRAES) for passive internal and external rotations and active internal rotation were significantly lower in the AL and control groups than the PL group. Discussion: This study was suggested that the hip joint position sense in the AL group was better retained for the preservation of the soft tissue.

Metastatic Rectal Adenocarcinoma of the Hip and Knee Joints: A Case Series

Two cases are presented of patients with a history of metastatic rectal adenocarcinoma presenting with a painful joint effusion. Both cases are potential examples of metastasis to periarticular bone with local infiltration to the synovium, which is one proposed mechanism of intrasynovial metastasis. While skeletal metastases are a relatively common occurrence in metastatic adenocarcinoma, intraarticular metastasis is extremely rare. These cases highlight the need to consider metastasis in the differential of joint swelling in the setting of a history of adenocarcinoma.