Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic...Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.展开更多
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s...Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.展开更多
基金Project(201031)supported by the Environmental Protection Scientific Research of Jiangsu Province,ChinaProject(BE2010184)supported by the Technology Support Program of Jiangsu Province-Industrial Parts,China
文摘Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.
文摘Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.
