Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds wer...Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds were investigated. The results show that the hook in the joint welded in clockwise was curved upwards and that in anticlockwise was curved downwards. The hook formation was related to the plastic material flow in the joint. With increasing the rotary speed in clockwise direction, the hook moved upwards and far way from the center of the keyhole, resulting in an increase in the effective weld width and a decrease in the effective sheet thickness. Three types of fractuces were observed and they were affected by the hook geometries. The tensile shear load increased firstly and then decreased when the rotary speed increased in clockwise direction, which was related to the hook geometries.展开更多
基金This work was sponsored by the National Natural Science Foundation of China （51364037）, the Landed Plan of Science and Technology in Colleges and Universities of Jiangxi Province （KJLD12074）, the Aerospace Science Foundation of China （20111156004）.
文摘Friction stir spot welding of A6061 sheets was conducted using a tool with thread pin. The hook geometries, hook formation and mechanical properties of the joints welded with different rotary directions and speeds were investigated. The results show that the hook in the joint welded in clockwise was curved upwards and that in anticlockwise was curved downwards. The hook formation was related to the plastic material flow in the joint. With increasing the rotary speed in clockwise direction, the hook moved upwards and far way from the center of the keyhole, resulting in an increase in the effective weld width and a decrease in the effective sheet thickness. Three types of fractuces were observed and they were affected by the hook geometries. The tensile shear load increased firstly and then decreased when the rotary speed increased in clockwise direction, which was related to the hook geometries.
