To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid mode...To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid model implemented in CFD software. In this paper, the effect of expansion of the inclined pipe, which is the actual plant geometry, was evaluated. When increasing the air velocity, CCFL characteristics and the mechanism of flow pattern transition had significant differences between the case with and without expansion of the inclined pipe. CCFL characteristics were mitigated in the case with expansion. The effect of computational grid size was also discussed. When the supplied water velocity was small, the predicted flow pattern transition point agreed well with the measured data by increasing the number of cells. On the other hand, when the air velocity was decreasing, there were no significant differences in each case.展开更多
In order to evaluate CCFL （countercurrent flow limitation） characteristics in a PWR （pressurized water reactor） hot leg under reflux condensation, numerical simulations have been conducted using a 2F （two-fluid）...In order to evaluate CCFL （countercurrent flow limitation） characteristics in a PWR （pressurized water reactor） hot leg under reflux condensation, numerical simulations have been conducted using a 2F （two-fluid） model and a VOF （volume of fluid） method implemented in the CFD （computational fluid dynamics） software, FLUENT6.3.26. The 2F model gave good agreement with CCFL data in low pressure conditions but did not give good results for high pressure steam-water conditions. In the previous study, the computational grid and schemes were improved in the VOF method to improve calculations in circular tubes, and the calculated CCFL characteristics agreed well with the UPTF （Upper Plenum Test Facility） data at 1.5 MPa. In this study, therefore, using the 2F model and the computational grid previously improved for the VOF calculations, numerical simulations were conducted for steam-water flows at 1.5 MPa under PWR full-scale conditions. In the range of medium gas volumetric fluxes, the calculated CCFL characteristics agreed well with the values calculated by the VOF method and the UPTF data at 1.5 MPa. This indicated that the reference set of the interfacial drag correlations employed in this study could be applied not only to low pressures but also to high pressures.展开更多
Under severe accidents, natural circulation flows are important to influence the accident progression and result in a pressurized water reactor (PWR). In a station blackout accident with no recovery of steam generator...Under severe accidents, natural circulation flows are important to influence the accident progression and result in a pressurized water reactor (PWR). In a station blackout accident with no recovery of steam generator (SG) auxiliary feedwater (TMLB' severe accident scenario), the hot leg countercurrent natural circulation flow is analyzed by using a severe-accident code, to better understand its potential impacts on the creep-rupture timing among the surge line, the hot leg, and SG tubes. The results show that the natural circulation may delay the failure time of the hot leg. The recirculation ratio and the hot mixing factor are also calculated and discussed.展开更多
文摘To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid model implemented in CFD software. In this paper, the effect of expansion of the inclined pipe, which is the actual plant geometry, was evaluated. When increasing the air velocity, CCFL characteristics and the mechanism of flow pattern transition had significant differences between the case with and without expansion of the inclined pipe. CCFL characteristics were mitigated in the case with expansion. The effect of computational grid size was also discussed. When the supplied water velocity was small, the predicted flow pattern transition point agreed well with the measured data by increasing the number of cells. On the other hand, when the air velocity was decreasing, there were no significant differences in each case.
文摘In order to evaluate CCFL （countercurrent flow limitation） characteristics in a PWR （pressurized water reactor） hot leg under reflux condensation, numerical simulations have been conducted using a 2F （two-fluid） model and a VOF （volume of fluid） method implemented in the CFD （computational fluid dynamics） software, FLUENT6.3.26. The 2F model gave good agreement with CCFL data in low pressure conditions but did not give good results for high pressure steam-water conditions. In the previous study, the computational grid and schemes were improved in the VOF method to improve calculations in circular tubes, and the calculated CCFL characteristics agreed well with the UPTF （Upper Plenum Test Facility） data at 1.5 MPa. In this study, therefore, using the 2F model and the computational grid previously improved for the VOF calculations, numerical simulations were conducted for steam-water flows at 1.5 MPa under PWR full-scale conditions. In the range of medium gas volumetric fluxes, the calculated CCFL characteristics agreed well with the values calculated by the VOF method and the UPTF data at 1.5 MPa. This indicated that the reference set of the interfacial drag correlations employed in this study could be applied not only to low pressures but also to high pressures.
文摘Under severe accidents, natural circulation flows are important to influence the accident progression and result in a pressurized water reactor (PWR). In a station blackout accident with no recovery of steam generator (SG) auxiliary feedwater (TMLB' severe accident scenario), the hot leg countercurrent natural circulation flow is analyzed by using a severe-accident code, to better understand its potential impacts on the creep-rupture timing among the surge line, the hot leg, and SG tubes. The results show that the natural circulation may delay the failure time of the hot leg. The recirculation ratio and the hot mixing factor are also calculated and discussed.
