Characteristics and Mechanisms of Persistent Wet–Cold Events with Different Cold-air Paths in South China

We investigate the characteristics and mechanisms of persistent wet–cold events(PWCEs)with different types of coldair paths.Results show that the cumulative single-station frequency of the PWCEs in the western part of South China is higher than that in the eastern part.The pattern of single-station frequency of the PWCEs are“Yangtze River(YR)uniform”and“east–west inverse”.The YR uniform pattern is the dominant mode,so we focus on this pattern.The cold-air paths for PWCEs of the YR uniform pattern are divided into three types—namely,the west,northwest and north types—among which the west type accounts for the largest proportion.The differences in atmospheric circulation of the PWCEs under the three types of paths are obvious.The thermal inversion layer in the lower troposphere is favorable for precipitation during the PWCEs.The positive water vapor budget for the three types of PWCEs mainly appears at the southern boundary.

Population Construction and Super-high Yield Characteristics of Japonica Super Rice in Cold Regions

[Objective] This study was conducted to construct a super-high yield population of Japnica rice in cold regions of North China and to explore its characteristics. [Method] The super rice variety Longjing 21 was selected as the experimental material. Different row spacing（two levels）, plant spacing（three levels） and seedling number per hill（three levels） were designed in field trials. Then, the growth stages,dry matter accumulation, leaf area, yield and yield components of these different treatments were measured. [Result] Rice yield had significantly negative correlation with plant spacing and row spacing, but no significant correlation with seedling number per hill. Rice yield was mainly affected by plant spacing, and less affected by seedling number per hill. The best recommended specifications for plant spacing of super rice variety Longjing 21 were 24 cm for row spacing, 12 cm for plant spacing and five seedlings per hill, and the expected yield was 10 473.0 kg/hm^2.The increased number of total spikelets（4.5×108hm2or more） in populations was the major reason for high yield. Super-high yield populations had fewer tillers at the early growth stage and achieved the expected number of productive tillers at critical leaf-age（June 25）, and tiller number peaked at jointing stage（July 6） and was about 1.2 times of the expected number. The percentage of productive tillers in total tillers of super-high yield population was more than 85% at heading stage. At middle growth stage（from jointing to heading stage）, the dry matter accumulation, leaf area index（LAI） at heading stage, effective leaf area, spikelet number of population,spikelet number per leaf area unit（cm2）, and culm-sheath weight per stem of super-high yield population were significantly higher than those of other populations.At late growth stage（from heading to maturity stage）, the leaf area decreasing rate of super-high yield population was significantly smaller than that of other populations. At late growth stage（from heading to maturity stage）, the leaf area decreasing rate, crop growth rate, net assimilation rate, biomass accumulation, number of filled grains per leaf area unit（cm^2） and grain weight per leaf area unit（cm^2） of high-yield population were significantly higher than those of other populations. Output and translocation of dry matter（weight per stem and sheath and total filling rate at maturity） from heading to milky stage of super-high yield population were significantly higher than those of other populations. [Conclusion] The characteristics of superhigh yield rice in cold region of North China are enriching the amount of actual filling of sink through improving photosynthetic efficiency from heading to maturity stage on the basis of enough panicle numbers.

Chemicohydrographic characteristics of the Yellow Sea Cold Water Mass

Based on the field data obtained during summer cruises in 2006, the overall perspective of chemical and hydrographic characteristics of the Yellow Sea Cold Water Mass （YSCWM） are discussed through the cross- YSCWM transect profiles and horizontal distributions of hydrological and chemical variables, with emphasis on the differences between the northern Yellow Sea Cold Water Mass （NYSCWM） and the southern Yellow Sea Cold Water Mass （SYSCWM）. The results show that YSCWM is characterized by low temperature （〈10℃） and dissolved oxygen （DO） concentration, high salinity （〉32.0） and nutrient concentrations. Compared to the SYSCWM, the NYSCWM possesses lower values of temperature, salinity and nutrient concentrations but higher values of DO. Also its smaller variation ranges of variables （except for temperature） demonstrate that NYSCWM is more uniform than that of SYSCWM. In addition, thermocline is more intensive in the SYSCWM than that of NYSCWM. Furthermore, DO and Chl a maxima appear at the depth of 30 m in the SYSCWM, while these phenomena are not obvious in the NYSCWM.

Analysis on the Temporal and Spatial Characteristics and Causes of Cold Wave in Qinhuangdao

[Objective] The aim was to study the temporal and spatial characteristics and causes of cold wave in Qinhuangdao.[Method] Based on temperature data from five surface meteorological stations in Qinhuangdao from 1970 to 2009 and the latest standards issuing cold wave early warning signal,statistical analysis on the temporal and spatial distribution of cold wave was carried out,and the causes were discussed preliminarily.[Result] From 1970 to 2009,the frequencies of blue and yellow cold wave in Qinhuangdao region were 2 334 and 105 times respectively,and cold wave occurred most frequently in Qinglong County and least frequently in Lulong County,which was related to the effects of underlying surface,latitude and altitude.Cold wave might happen from September to next May,and the earliest occurrence date was September 9,while the latest end date was May 26.In addition,the frequency of cold wave was the highest in January and lowest in May.From 1970 to 2009,blue cold wave occurred most frequently in 1972 and 1979 and least frequently in 1984,while the frequency of yellow cold wave was the highest in 1979 and lowest in 9 years.From decadal variation,cold wave appeared most frequently in the 1970s and least frequently in the 1990s.With the increase of temperature,the frequency of cold wave showed decrease trend,and the beginning date tended to postpone,while its end date advanced,and it showed that the changes of cold wave was mainly caused by climate warming.[Conclusion] The study could provide theoretical guidance for the meteorological disaster prevention and reduction and local agricultural service.

CHARACTERISTICS AND FORMATION CAUSES OF QINGDAO COLD WATER MASS

In this work, the main characteristics of the Qingdao Cold Water Mass were studied by using "the comparison analysis method" based on 1980 temperature,salinity and dissolved oxygen data on the western South Yellow Sea. The formation cause of the water mass was analyzed based on February of 1959 temperature and salinity data for this area and on some other authors’ studies. The results showed that the Qingdao Cold Water Mass has growing and vanishing processes: appears in the last ten days of March; has stable pattern in April; is biggest in its area in May; becomes small in its area in June; vanishes in July. It comes from the northern Shandong Coastal Water and is characterized by low temperature and salinity and high dissolved oxygen. The mass is formed under the joint effects of anticyclonic circulation and solar radiation.

Adaptive threading strategy based on rolling characteristics analysis in hot strip rolling

In order to improve the threading stability and the head thickness precision in tandem hot rolling process, an adaptive threading strategy was proposed. The proposed strategy was realized by the rolling characteristics analysis, and factors which affect the rolling force and the final thickness were determined and analyzed based on the influence coefficients calculation process. An objective function consisting of the influenced factors was founded, and the disturbance quantity was obtained by minimizing the function with the Nelder-Mead simplex method, and the proposed adaptive threading strategy was realized based on the calculation results. The adaptive threading strategy has been applied to one 7-stand hot tandem mill successfully, actual statistics data show that the predicted rolling force prediction in the range of +/- 5.0% is improved to 97.8%, the head thickness precision in the range of +/- 35 mu m is improved to 98.5%, and the threading stability and the head thickness precision are enhanced to a high level.

The Compaction Characteristics of Hot Mixed Asphalt Mixtures

The quality of compaction is important to the performance of hot mixed asphalt （HMA） pavement. Most premature failures of asphalt pavement are concerned with poor compaction. Compaction characteristic of lIMA mixtures were studied. Compaction tests were done with typical widely used HMA mixtures, including dense gradation asphalt mixtures with different nominal maximum aggregate size （AC13,AC20,AC25）, and mixtures with different gradation （AC13, SMA13,Supl3 and OGFC13）. HMA mixtures were sampled at different compaction temperature and Marshall blow numbers, varying between 60 and 175 ~C and between 15 and 75 lows, respectively. The compaction characteristics of these mixtures were evaluated. The results showed that the Marshall stability and volumetric properties were significantly affected by the compaction temperature. Mixtures with the same NMAS but different type of gradation need different compaction energy to get the designed density.

Characteristics analysis for cold water patches off the Jiangsu coast in the last 35a

The daily and monthly-mean characteristics of cold water patches （CWPs） off the Jiangsu coast in 35 a of 1982-2016 are examined based on advanced very high resolution radiometer （AVHRR） data. Most of the CWPs are found to occur in the warm and hot months （May-September）, with some CWPs in the cool and cold months （October-April）. The average radius and intensity of the monthly-mean CWPs are about 81 km and 0.6℃, respectively. The average difference in the sea surface temperature （SST） between the centers of the CWPs and the nearshore is about 2.0℃. The correlation analysis between the CWPs, winds and tides indicates that most of the CWPs occurred during the southerly winds, with some CWPs occurring during the northerly winds. The average intensity of the CWPs during spring tides is slightly stronger than that during neap tides in the warm and hot months, and the difference is very small in the cool and cold months.

Characteristics of a radio-frequency cold atmospheric plasma jet produced with a hybrid cross-linear-field electrode configuration

Cold atmospheric plasma(CAP)jet has wide applications in various fields including advanced materials synthesis and modifications,biomedicine,environmental protection and energy saving,etc.Appropriate control on the volume,temperature and chemically reactive species concentratio ns of the CAP jet is of great importance in actual applications.In this paper,an radio-frequency atmospheric-pressure glow discharge(RF-APGD)plasma generator with a hybrid cross-linear-field electrode configuration is proposed.The experimental results show that,with the aid of the copper mesh located at the downstream of the traditional co-axial-type plasma generator with a cross-field electrode configuration,a linear field between the inner powered electrode of the traditional plasma generator and the copper mesh can be established.This linerfield can,to some extent,enhance the discharges at the upstream of the copper mesh,resulting in small increments(all less than 12.5%)of the species emission intensities,electron excitation temperatures and gas temperatures by keeping other parameters being unchanged.And due to the intrinsic transparent and conducting features of the grounded copper mesh to the gas flowing,electric current and heat flux of the plasma plumes,a plasma region with higher concentrations of chemically reactive species and larger plasma plume diameters is obtained at the downstream of the grounded copper mesh on the same level of the gas temperature and electron excitation temperature compared to those of the plasma free jet.In addition,the charged particle number densities at the same downstream axial location of the grounded copper mesh decrease significantly compared to those of the plasma free jet.This means that the copper mesh is also,to some extent,helpful for separating the chemically reactive neutral species from the charged particles in side a plasma environment.The preceding results indicate that the cross-linear-field electrode configuration of the plasma generator is an effective approach for tuning the characteristics of the RF-APGD plasma jet in order to obtain an appropriate combination of the plasma jet properties with higher chemically reactive species concentrations,especially relative higher number densities of neutral species,larger plasma volumes and lower gas temperatures.

Mesoscale and Microphysical Characteristics of a Double Rain Belt Event in South China on May 10–13,2022

A second rain belt sometimes occurs ahead of a frontal rain belt in the warm sector over coastal South China,leading to heavy precipitation.We examined the differences in the mesoscale characteristics and microphysics of the frontal and warm sector rain belts that occurred in South China on May 10–13,2022.The southern rain belt occurred in an environment with favorable mesoscale conditions but weak large-scale forcing.In contrast,the northern rain belt was related to low-level horizontal shear and the surface-level front.The interaction between the enhanced southeasterly winds and the rainfall-induced cold pool promoted the persistent growth of convection along the southern rain belt.The convective cell propagated east over the coastal area,where there was a large temperature gradient.The bow-shaped echo in this region may be closely related to the rear-inflow jet.By contrast,the initial convection of the northern rain belt was triggered along the front and the region of low-level horizontal shear,with mesoscale interactions between the enhanced warm-moist southeasterly airflow and the cold dome associated with the earlier rain.The terrain blocked the movement of the cold pool,resulting in the stagnation of the frontal convective cell at an early stage.Subsequently,a meso-γ-scale vortex formed during the rapid movement of the convective cell,corresponding to an enhancement of precipitation.The representative raindrop spectra for the southern rain belt were characterized by a greater number and higher density of raindrops than the northern rain belt,even though both resulted in comparable hourly rainfalls.These results help us better understand the characteristics of double rain belts over South China.

The Spatial Distribution Characteristics of Resident Population Growth Rate in Henan Province, China

Population is an important strategic resource for national development, a fundamental element of socio-economic development. The coordinated development of population and economy is an effective way to achieve rapid economic growth. Based on the population statistics data of counties (districts) in Henan Province, China, from 2006 to 2021. The paper firstly uses the logistic population growth mathematical model to calculate the resident population growth rate of counties (districts), then utilizes the hotspot analysis and spatial semi-variogram analysis, to research the spatial distribution characteristics of the resident population growth rate in Henan Province. The research results show that the evolution of the regional resident population in the province basically conforms to the logistic natural growth model. The resident population growth rate shows the characteristics of high in the north and low in the south, high in the center and low in the surrounding regions. The resident population growth rate is positively correlated with the level of economic development;the urban built-up areas, especially the new regions in urban planning, have a fast growth rate of resident population, which has a significant siphon effect on the population of surrounding regions. The hotspots of resident population growth rate in the province are mainly distributed in the urban built-up areas and surrounding regions of Zhengzhou, Luoyang, and Xinxiang, accounting for about 3.51% of the total area of the province. The cold spots are mainly distributed in the eastern part of the province, forming zonal distribution, which spans across Shangqiu City, Zhoukou City, and Zhumadian City, accounting for about 8.61% of the total area of the province. The area with negative growth of resident population accounts for approximately 53.47% of the total province. The spatial distribution of the growth rate of the resident population in the whole province basically conforms to the spherical model, with a small dispersion degree and a short range. In the range, there is a high degree of variability in resident population growth rate.

The morphological characteristics of gully systems and watersheds in Dry-Hot Valley, SW China

Gully systems and watersheds are geomorphic units with clear boundaries that are relatively independent of basin landscapes and play an important role in natural geography. In order to explore the morphological characteristics of gully systems and watersheds in the Dry-Hot Valley [South West(SW) China], gullies are interpreted from online Google images with high resolution and watersheds are extracted from digital elevation model at a scale of 1:50,000. The results show that:(1) There are17,382 gullies(with a total area of 1141.66 km2) and 42 watersheds in the study area.(2) The average gully density of the study area(D) is 4.29 km/km2, gully frequency(F) is 14.39 gullies/km2, the branching ratio(B) is 5.13, the length ratio(L) is 3.12, and the coefficient of the main and tributary gullies(M) is 0.06. The degree of gully erosion isstrong to extremely strong, the main development intensity of gully erosion ranges from intense to moderate, and the type of gully system is tributary.(3) The watershed areas(A) are between 0.39 and 96.43 km2, the relief ratio(R) is from 0.10 to 0.19, the circularity ratio(C) is from 0.30 to0.83, the texture ratio(T) is from 0.82 to 39.35, and the dominant geomorphological texture type is fine.(4) There is a quantitative relationship between F and D:F = 0.624 D2(R =0.84) and T is closely related to D, F, M(R2[ 0.7). A,R and C are related to M(R2[ 0.5). The development of gully systems is the result of coupling effects between multiple factors. In this area, the degree of erosion and the condition of the main and tributary gullies can be controlled by the degree of topographic breakage in the watershed, which provides some theoretical basis for the evaluation of gully erosion by the latter. In addition, the scale, relief, and shape have a significant impact on the locations of the main and tributary gullies. For tributary gullies, attention should be paid to the interception and control of runoff and sediment in the small confluence branches in order to prevent gully expansion and head advance. These features can inform the development of targeted measures for the control of soil erosion.

Influences of the inner diameter of the solid shielding tube on the characteristics of the radio-frequency cold atmospheric plasma jet

Active control of the local environment of the cold atmospheric plasma(CAP) jet is of great importance in actual applications since the CAP operates in an open atmosphere with the inevitable entrainment of the surrounding cold air. In this paper, the solid shielding effects of the cylindrical quartz tubes with different inner diameters on the characteristics of the CAP jets driven by a radio-frequency(RF) power supply are studied experimentally. The experimental results show that the total length of the shielded plasma jet can be increased significantly by an appropriate combination of the quartz tube inner diameter and that of the plasma generator nozzle exit with other parameters being unchanged. This phenomenon may be qualitatively attributed to the loss of diffusion of the charged particles in the radial direction under different inner diameters of the quartz tubes. Compared with the plasma free jet, the plasma shielding jet is produced with optimized parameters including longer plasma jet length, higher concentrations of chemically reactive species, higher rotational, vibrational, and electron excitation temperatures when the inner diameters of the solid shielding tube and the generator nozzle exit are the same. A maximum plasma jet length of 52.0 cm is obtained in contrast to that of 5.0 cm of the plasma free jet in this study. The experimental results indicate that the solid shielding effect provides a new method for the active control of the local environment of the RF-CAP jet operating in an open atmosphere.

THE CHARACTERISTICS OF GENERAL CIRCULATION, POLAR ICE AND SNOW DAYS / COVER OF EXTREMELY SEVERE COLD MONTHS IN SOUTH CHINA WINTER

The work has made a statistic study of the variations of extremely severe cold winter months in the south of China and general circulation and external forcing factors in preceding periods. The result shows that from the current month to the preceding March the subtropical high in the west Pacific is persistently weak or located more to the east and south. When the summer monsoon is weak in East Asia in the year before, the winter monsoon will be strong in the current year in which the extremely severe cold month occurs. The Asian polar vortex expands in the preceding July, August and September and the current winter. The Tibetan Plateau has fewer days of snow cover in the November and December before the cold month occurs. There is less snow in the Tibetan Plateau in the preceding winter / spring of each extremely severe cold month. There are more polar ice in the polar Region Ⅳ for the 11 months before the current February, especially the previous March through August, and in Region Ⅱin January ~ November before the current cold month of December but less ice in Region Ⅲ in March ~ August.

THE CHARACTERISTICS OF 500 hPa GEOPOTENTIAL AND SST FIELD OF EXTREMELY SEVERE COLD MONTHS IN SOUTH CHINA WINTER

The region of south China is sometimes subject to major climatic catastrophes in winter. To have a clear understanding, the time in which extremely severe cold months occur in the south China wintertime over the past 45 years are determined and characteristics of the 500-hPa geopotential fields and SST fields are studied for the simultaneous and preceding 6-month periods. Similarity exists in the 500-hPa geopotential fields between each current severely cold month, with the geopotential pattern of being high in the north, but low in the south, of Asian-Pacific region and meridional circulation developing. The work presents anomalies of the months with significant differences in the 500-hPa geopotential field of the previous periods. The SSTA is continuous in the distribution from each extremely severe cold winter month back to the 6 months leading up to it for the region of south China while the SST pattern is of El Ni?o in January and the preceding 1 ~ 6 months for equatorial eastern Pacific but of La Ni?a in February and December. It is concluded that the prediction of severely cold winter months are possible with the use of the geopotential field at 500 hPa and the SST fields for the months ahead of the target time.

Cold Wave Climate Characteristics and Risk Zoning in Jilin Province

Using the meteorological data of 50 stations in Jilin Province from 1961 to 2016, the demographic and economic data, and geographical information of all counties and cities aims to conduct the risk zoning of cold wave disasters in Jilin Province. The results show that, since 1961, the average number of cold wave occurrences per year in Jilin Province is 8.3 days, of which the highest number of occurrences occurred in February, followed by December and January, and the spring cold wave occurred mostly in March. From the map of cold-sea disaster risk zoning in Jilin Province, due to factors such as topography and land use distribution, the west and east of Jilin Province have a certain resilience to the disasters caused by cold waves, and the risk of disasters is low. The distribution of agricultural facilities and large areas of farmland in the central region are extremely sensitive to cold wave disasters and have a high risk of disasters. Areas with high risk of cold wave are mainly concentrated in Siping City, Changchun City, Liaoyuan City, Jilin City, northern Tonghua City and most of Baishan City. Areas with low cold wave risk are mainly concentrated in most of Baicheng City, most of Songyuan City and Yanbian Prefecture. And other places are moderately risky areas of cold waves.

Dynamic response characteristics of a circular lined tunnel under anisotropy frost heave of overlying soil at the tunnel portal section in cold regions

The rapid development of traffic engineering in cold regions and its consequent problems need to be considered.In this paper,the dynamic response characteristics of the tunnel portal section in cold regions with harmonic load acting on the lining were studied in the frequency domain.The lining is in close contact with the frozen soil,and there is relative movement between the frozen and unfrozen soil due to the phase change.The analytical solution of the vibration of tunnel portal section caused by the harmonic load acting on the lining was derived under the consideration of the anisotropy frost heave of overlying soil.Based on the continuity conditions and boundary conditions,the undetermined coefficients were obtained,and the analytical solutions for different medium displacements and stresses of the cold-region tunnel system were acquired.The vertical pressure coefficient was equivalently simplified as a variable that could be used to replace the thickness of the overlying soil above the tunnel.The analysis of the parameter model shows that the change of the medium parameters(lining,frozen,and unfrozen soil)affects the circumferential stresses,the radial displacements and their peak frequencies of the soil.For example,the increase of density ratio of tunnel lining to frozen soil decreases the radial stresses of the frozen and unfrozen soil;the increase of volumetric frost heaving strain of the frozen soil increases the radial displacements of the frozen surface and decreases the stability of the frozen surface;the increasing of thickness of the frozen soil significantly reduces the radial displacement of unfrozen soil at dimensionless radius η=4.5 compared with that of frozen soil at η=1.5.

Spatio-Temporal Characteristics of Winter Cold Events in China from 1960 to 2020

Under the background of global warming, extreme cold events occur frequently. It is important to enhance the understanding of cold air patterns for forecasting cold air and reducing cold air-induced meteorological disasters. The study used the daily minimum temperatures from the National Climate Centre to classify the cold events affecting China into five different grades and the characteristics of different intensity cold events in China during the winter from 1960 to 2020 were analyzed. The results showed that there is little difference in the distribution of the frequency of general cold events from north to south, with duration longer in the north than in the south and an increase in frequency in the north in the last 60 years. The frequency of strong cold events is more in the north of China than in the south of China, and the duration is longer in the south than in the north China, with the frequency decreasing in most parts of the country. In addition to latitude, cold events frequency is closely linked to topography, with basins surrounded by high mountains being difficult to be affected by cold events, especially extreme cold events. In terms of month distribution, December was subject to the highest frequency of cold events and the longest duration of a single cold events process.

Roll Gap Crown Adjustment Characteristics of 1700 mm Cold Rolling Mills

The 4-hi cold mill is one of the key wide strip tandem cold rolling mills and has many advantages and characteristics. The mill type is the most important, fundamental and long-term effective factor for the strip shape control. Many advanced mill types such as CVC-4, HCW and PC-4, etc are created based on the conventional four-roll mill. The factors of mill type which affect the deformation of roll system, such as strip width, rolling force, bending force, work roll diameter, backup diameter and so on, arc studied how to affect roll gap crown. It provides a good foundation lbr improving the shape performance of mill.

Microstructural evolution during hot and cold deformation of Ti-36Nb-2Ta-3Zr-0.35O alloy

The Ti-36Nb-2Ta-3Zr-0.350 （mass fraction, %） （TNTZO） alloy was produced by cold isostatic pressing and sintering from elemental powders, followed by hot and cold deformation. The effects of deformation process on microstructures and mechanical properties were investigated using the SEM, TEM, OM and the universal material testing machine. Results show that the alloy can be easily hot forged and cold swaged due to the fine-grained microstructure. Only after cold swaging by 85%, the alloy shows the typical ＂marble-like＂ structure. And thecold deformation is accompanied by stress-induced a＂ phase transformations. Moreover, both the strength and the ductility of the alloy are significantly improved by hot and cold working.