One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode bas...One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.Ayaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller isactuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platfomm.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.展开更多
Due to high efficiency,high controllability,high integration,lightweight,and other advantages,electric vehicle with hub motor driving technology has become an emerging trend of chassis technology.This paper concludes ...Due to high efficiency,high controllability,high integration,lightweight,and other advantages,electric vehicle with hub motor driving technology has become an emerging trend of chassis technology.This paper concludes the current state⁃of⁃the⁃art of hub motor drive technologies.Firstly,it summarizes recent hub motor drive products and makes suggestions for hub motor drive schemes in different application scenarios.Then research on hub motor drive key technologies such as integrated design,thermal optimization,lightweight,and intensity optimization is investigated.Considering the high response accuracy and zero delay characteristic of hub motor driving system combined with advanced distributed dynamics control technology that can further improve vehicle performance,this paper also analyzes existing chassis dynamics control technologies of hub motor driving system.Considering the development trend of vehicle electrification,intelligentization,network connection,and current research,this paper makes some forecasts for hub motor drive technologies development in the conclusion.展开更多
This paper describes in detail three kinds of typical compound braking strategy of wheel motor drive electric vehicle and summarizes the current commonly used strategies based on the three typical strategies developed...This paper describes in detail three kinds of typical compound braking strategy of wheel motor drive electric vehicle and summarizes the current commonly used strategies based on the three typical strategies developed. In the end, a new compound braking strategy is proposed;that is, we take braking mode classify, ECE regulations and SOC value of the battery as an important reference of braking force that joins the motor braking force, as well as we join the different identification models;according to the different braking modes, the purpose is that we can apply the different braking program.展开更多
Motion analyses are performed with the help of stability and simulation analysis, which can provide theoretical bases for applications of an electric vehicle with two independent drive motors. Compared with one-motor ...Motion analyses are performed with the help of stability and simulation analysis, which can provide theoretical bases for applications of an electric vehicle with two independent drive motors. Compared with one-motor drive electric vehicle, the two-motor drive electric vehicle has the advantage of easy layout, simple power train and good drivability and handling characteristics. Analysis shows the method connecting armatures of two DC motors in parallel can function as mechanical differential without a steering sensor, which can simplify structure and increase reliability of the controller. Computer simulations and experiment are carried out to verify conclusions.展开更多
Simulink is a visual simulation tool in MATLAB;?through Simulink software,?to establish a model can reduce the amount of programming workload,?and?improve the efficiency of the establishment of automotive models.?The ...Simulink is a visual simulation tool in MATLAB;?through Simulink software,?to establish a model can reduce the amount of programming workload,?and?improve the efficiency of the establishment of automotive models.?The ride comfort of the vehicle is a measure of the most basic indicators of a car performance.?By establishing a ride comfort model in Matlab/Simulink, the wheel motor electric vehicle mainly affects the smoothness of the car mainly in the following aspects:?pavement, tire, suspension, motor and so on.?Through the establishment of the above model,?we?can effectively study the wheel motor drive electric vehicle ride comfort research.展开更多
以轮毂电动机驱动电动汽车为研究对象,采用分层控制策略提出自适应巡航系统,结合上层模型预测控制器与下层PID(proportion integral differential)控制器,针对复杂的纵向跟随工况,对轮毂电动机输出的驱动力矩进行精确控制.提出基于前车...以轮毂电动机驱动电动汽车为研究对象,采用分层控制策略提出自适应巡航系统,结合上层模型预测控制器与下层PID(proportion integral differential)控制器,针对复杂的纵向跟随工况,对轮毂电动机输出的驱动力矩进行精确控制.提出基于前车加速度的可变车头时距策略,利用模型预测控制算法(model predictive control,MPC)求解本车期望加速度的上层控制器,利用PID算法求解整车前后轴驱动力矩,并输入到轮毂电动机的下层控制器,实现前后轮驱动力矩分配,最终实现车辆纵向自适应巡航.建立联合仿真模型,针对匀速前进、紧急制动、城市循环工况等场景,对所提出的自适应巡航分层控制策略进行验证,结果表明:所提出的自适应巡航系统控制策略针对纵向复杂行驶工况的跟驰效果良好,跟驰过程中车间距误差较小,加速度变化与电动机驱动转矩变化可以较好地进行同步与响应.展开更多
基金This work was supported by the Weapons and Equipment Pre-Research Project of China(No.301051102).
文摘One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.Ayaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller isactuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platfomm.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.
文摘Due to high efficiency,high controllability,high integration,lightweight,and other advantages,electric vehicle with hub motor driving technology has become an emerging trend of chassis technology.This paper concludes the current state⁃of⁃the⁃art of hub motor drive technologies.Firstly,it summarizes recent hub motor drive products and makes suggestions for hub motor drive schemes in different application scenarios.Then research on hub motor drive key technologies such as integrated design,thermal optimization,lightweight,and intensity optimization is investigated.Considering the high response accuracy and zero delay characteristic of hub motor driving system combined with advanced distributed dynamics control technology that can further improve vehicle performance,this paper also analyzes existing chassis dynamics control technologies of hub motor driving system.Considering the development trend of vehicle electrification,intelligentization,network connection,and current research,this paper makes some forecasts for hub motor drive technologies development in the conclusion.
文摘This paper describes in detail three kinds of typical compound braking strategy of wheel motor drive electric vehicle and summarizes the current commonly used strategies based on the three typical strategies developed. In the end, a new compound braking strategy is proposed;that is, we take braking mode classify, ECE regulations and SOC value of the battery as an important reference of braking force that joins the motor braking force, as well as we join the different identification models;according to the different braking modes, the purpose is that we can apply the different braking program.
文摘Motion analyses are performed with the help of stability and simulation analysis, which can provide theoretical bases for applications of an electric vehicle with two independent drive motors. Compared with one-motor drive electric vehicle, the two-motor drive electric vehicle has the advantage of easy layout, simple power train and good drivability and handling characteristics. Analysis shows the method connecting armatures of two DC motors in parallel can function as mechanical differential without a steering sensor, which can simplify structure and increase reliability of the controller. Computer simulations and experiment are carried out to verify conclusions.
文摘Simulink is a visual simulation tool in MATLAB;?through Simulink software,?to establish a model can reduce the amount of programming workload,?and?improve the efficiency of the establishment of automotive models.?The ride comfort of the vehicle is a measure of the most basic indicators of a car performance.?By establishing a ride comfort model in Matlab/Simulink, the wheel motor electric vehicle mainly affects the smoothness of the car mainly in the following aspects:?pavement, tire, suspension, motor and so on.?Through the establishment of the above model,?we?can effectively study the wheel motor drive electric vehicle ride comfort research.
文摘以轮毂电动机驱动电动汽车为研究对象,采用分层控制策略提出自适应巡航系统,结合上层模型预测控制器与下层PID(proportion integral differential)控制器,针对复杂的纵向跟随工况,对轮毂电动机输出的驱动力矩进行精确控制.提出基于前车加速度的可变车头时距策略,利用模型预测控制算法(model predictive control,MPC)求解本车期望加速度的上层控制器,利用PID算法求解整车前后轴驱动力矩,并输入到轮毂电动机的下层控制器,实现前后轮驱动力矩分配,最终实现车辆纵向自适应巡航.建立联合仿真模型,针对匀速前进、紧急制动、城市循环工况等场景,对所提出的自适应巡航分层控制策略进行验证,结果表明:所提出的自适应巡航系统控制策略针对纵向复杂行驶工况的跟驰效果良好,跟驰过程中车间距误差较小,加速度变化与电动机驱动转矩变化可以较好地进行同步与响应.
