Different human-simulated characteristics of the driver models in the forward simulation of hybrid electric vehicles

Based on the control theories of PID, fuzzy logic and expert PID, the driver models are built and applied in the forward simulation for hybrid electric vehicles （HEV）. The impact to the vehicle speed tracking and the fuel economy is compared among the different driver models. The different human-simulated characteristics of the driver models are emphatically analyzed. The analysis results indicate that the driver models based on PID, simple fuzzy logic and expert PID are corresponding to the handling characteristics of different drives. The driver models of different human-simulated characteristics bring the handling divergence of drivers with different driving level and habit to the HEV forward simulation, and that is significant to the all-around verification and validation of the control strategy for HEV. System simulation results of different driver models validate the impact of driver models to the dynamic and fuel economy performance of HEV.

The Combination of Two Control Strategies for Series Hybrid Electric Vehicles

With most countries paying attention to the environment protection, hybrid electric vehicles have become a focus of automobile research and development due to the characteristics of energy saving and low emission. Power follower control strategy(PFCS) and DC-link voltage control strategy are two sorts of control strategies for series hybrid electric vehicles(HEVs). Combining those two control strategies is a new idea for control strategy of series hybrid electric vehicles. By tuning essential parameters which are the defined constants under DClink voltage control and under PFCS, the points of minimum mass of equivalent fuel consumption(EFC) corresponding to a series of variables are marked for worldwide harmonized light vehicles test procedure(WLTP). The fuel economy of series HEVs with the combination control schemes performs better compared with individual control scheme. The results show the effects of the combination control schemes for series HEVs driving in an urban environment.

Multiple Purpose Simulation for Electric Vehicles

Aim Toshorten integral design period of electric vehicles Methods The electric vehicle simulation program(EVSP), a modular user-friendly program which is written in Borland C++ OWL for Windows was developed. Results EVSP allows simulating the dynamic and the economy performance of electric vehicles.EVSP provides many kinds of data input module,a large components library of electric vehicles and several kinds of speed cycle with these library,it is easily to develop a new concept of different drive trains or even to compare or improve the existing electric vehicles. The paper simulated the performance of YW6120DD Electric Bus, and analyzed the test results comparing with simulation results Conclusion The simulation results indicate that the EVSP may contribute to the developments of electric vehicles in general and the definition of the optimal match management in the drive train in particular.

Realization and Analysis of Good Fuel Economy and Kinetic Performance of a Low-cost Hybrid Electric Vehicle

By using high-power and high-efficiency propulsion systems,current hybrid electric vehicles（HEVs） in market can achieve excellent fuel economy and kinetic performance.However,it is the cost of current HEVs that hinders HEVs coming into widespread use.A novel hybrid electric propulsion system is designed to balance HEV cost and performance for developing markets.A battery/supercapacitor-based hybrid energy storage system（HESS） is used to improve energy conversion efficiency and reduce battery size and cost.An all-in-one-controller（AIOC） which integrates engine electronic control unit（ECU）,motor ECU,and HESS management system is developed to save materials and energy,and reduce the influence of distribution parameters on circuit.As for the powertrain configuration,four schemes are presented：belt-driven starter generator（BSG） scheme,four-wheel drive HEV scheme,full HEV scheme,and ranger-extender electric vehicle（EV） scheme.Component selection and parameter matching for the propulsion system are performed,and an energy management strategy is developed based on powertrain configuration and selected components.Forward-facing simulation models are built,comprehending the control strategy based on the optimal engine torque for the low-cost hybrid electric propulsion system.Co-simulation of AVL CRUISE and Matlab/Simulink is presented and the best scheme is selected.The simulation results indicate that,for the best design,fuel consumption in urban driving condition is 4.11 L/（100 km） and 0-50 km/h accelerating time is 10.95 s.The proposed research can realize low-cost concept for HEV while achieving satisfactory fuel economy and kinetic performance,and help to improve commercialization of HEVs.

Simulation research of energy management strategy for dual mode plug-in hybrid electrical vehicles

In this paper, a plug-in hybrid electrical vehicle(PHEV) is taken as the research object, and its dynamic performance and economic performance are taken as the research goals. Battery charge-sustaining(CS) period is divided into power mode and economy mode. Energy management strategy designing methods of power mode and economy mode are proposed. Maximum velocity, acceleration performance and fuel consumption are simulated during the CS period in the AVL CRUISE simulation environment. The simulation results indicate that the maximum velocity and acceleration time of the power mode are better than those in the economy mode. Fuel consumption of the economy mode is better than that in the power mode. Fuel consumption of PHEV during the CS period is further improved by using the methods proposed in this paper, and this is meaningful for research and development of PHEV.

Power Matching and Simulation Analysis of ISG Hybrid Electric Vehicle

Aiming at the limitation of ISG light hybrid electric vehicle, the power matching design of ISG moderate hybrid electric vehicle was studied. According to the requirements of vehicle performance indicators, the parameters of vehicle power drive system including engine, ISG motor, battery and related power transmission system were designed;the basic control strategy of ISG moderate hybrid electric vehicle was put forward;the dynamic model of vehicle was established by using MATLAB/Simulink software platform, and the vehicle performance was simulated under selected cycle conditions. The simulation results show that the parameter matching of the drive system is reasonable, the power performance of the vehicle meets the corresponding requirements, and the fuel economy has been significantly improved.

Design and Strategy of Series-Parallel Hybrid System Based on BSFC

In this paper,a drive control strategy is developed based on the characteristics of series-parallel plug-in hybrid system.Energy management strategies in various modes are established with the basis on the minimum brake specific fuel consumption(BSFC)curve of engine.The control strategy,which is based on rules and system efficiency,is adopted to determine the entry/exit mechanisms of various modes according to battery state of charge(SOC),required power and required speed.The vehicle test results verify that the proposed control strategy can improve vehicle economy efficiently and makes a good effect on engine control.

Steering Dynamic Performance of an Electric Transmission Tracked Vehicle Based on Rotating Speed Control

In order to analyze steering dynamic performance of an electric transmission tracked vehicle exactly, modern design theory and methodology-collaborative simulation and virtual prototype are applied. The 3-D multi-body dynamic model of full vehicle running gears and control system model are built based on the simulation platform on dynamic analysis software known as RecurDyn/Track-HM and control system analysis software known as Matlab/Simulink. Theory analysis and collaborative simulation of turning kinematic/dynamic performance in different velocity and turning radius are made. Comparing the test result with theory computation validates the correctness of the model. The method has instructional significance of solving the existent modeling problem, comprehension of turning performance and test debugging strategy,and also forms a new idea of research on dynamic characteristics for the electric transmission tracked vehicle’s electric propulsion system.

Co-simulation platform for single-shaft parallel HEVs based on Cruise+Matlab/Simulink

We reversely analyzed the energy management strategy （EMS） for a single-shaft parallel hybrid electric vehicle （HEV）, and build a forward co-simulation platform based on Cruise and Matlab. The vehicle dynamics model is built with Cruise, and control model is set up with Matlab/Simulink environment. The data between the two models are transferred by the Matlab API interface in Cruise. After mechanical and signal connections are completed, we establish the computing tasks and take the simulations of vehicle＇ s power performance, economy, and emission performance. The simulation results match the actual measurement results, which show that the co-simulation platform is correct and feasible. The platform can be used not only for a basic simulation platform to optimize further EMS, but also for the development of actual control system.

Analysis of Adverse Effects on Performance due to Battery Deterioration Installed in BEV and HEV

This paper reports the results of investigating the permissible amount of battery deterioration. An investigation was carried out using the following two types of vehicles： a BEV （battery electric vehicle） and a HEV （hybrid electric vehicle）. First, a detailed evaluation was carried out to identify how the vehicle performance was adversely affected as the lithium-ion batteries installed in the vehicles deteriorated. Next, an attempt was made to determine the permissible amount of deterioration for the vehicle-mounted lithium-ion batteries. In the case of the BEV, the driving distance declined by 20% when the capacity maintenance rate was approximately 80%. Therefore, this was specified as the permissible amount of battery deterioration for the BEV. In the case of the HEV, the fuel consumption increased by 20% when the maximum battery output maintenance rate was approximately 40%. Therefore, this was specified as the permissible amount of battery deterioration for the HEV.

A multivariable output neural network approach for simulation of plug-in hybrid electric vehicle fuel consumption

This study is laser focused on the simulation of fuel consumption and fuel economy label parameters of plug-in hybrid electric vehicles.While fuel economy is a key factor in the design of plug-in hybrid electric vehicles,a fuel economy label can educate customers about the economic advantage of purchasing a particular car.The fuel economy label of a PHEV consists of parameters like driving range,electrical energy consumption,fuel economy for city,highway,and combined use,battery recharge time,and fuel consumption rates.The study used an inverse function model of an artificial neural network to simulate and calculate the parameters of the fuel economy labels of PHEVs.Firstly,the selected parameters of the fuel economy label of plug-in hybrid electric vehicles were used to develop a single output model.The output variable of the single output model was then merged with dummy functions to form input variables for the inverse function model.The output variables simulated were engine size in litres;estimated driving range when the battery is fully charged in km,battery recharged time in hours,city fuel consumption(L/100 km),highway fuel consumption(L/100 km),combined fuel consumption(L/100 km),estimated driving range when the tank is full,carbon dioxide(CO_(2))emission in grams/km,electric motor power in kW,number of cylinders,and electrical charges consumed in kWh/100 km.Different cases of input variables were considered for the inverse function model.The accuracy of the model was 29.1 times greater than that of the conventional inverse artificial neural network model.

A comparative study of hybrid electric vehicle fuel consumption over diverse driving cycles

Environmental pollution and declining resources of fossil fuels in recent years,have increased demand for better fuel economy and less pollution for ground transportation.Among the alternative solutions provided by researchers in recent decades,hybrid electric vehicles consisted of an internal combustion engine and an electric motor have been considered as a promising solution in the short-term.In the present study,fuel economy characteristics of a parallel hybrid electric vehicle are investigated by using numerical simulation.The simulation methodology is based on a fast forward facing simulation model of a parallel hybrid and an internal combustion engine powertrains.The objective of this study is to present the main parameters which result in an optimum combination of hybrid powertrain components in order to obtain a better fuel economy of hybrid powertrains regarding different driven cycles and hybridization factors.Then,the fuel consumption of the parallel hybrid electric vehicles are compared considering various driven cycles and hybridization factors.The results showed that the better fuel economy of hybrid powertrains increases by decreasing average load of the test cycle and the point of the best fuel economy for a particular average load of the cycle moves towards higher hybridization factors when the average load of the test cycle is reduced.

Performance Analysis of Plug-in Hybrid Passenger Vehicles

PHEVs （passenger plug-in hybrid electric vehicles） have shown significant fuel reduction potential. Furthermore, PHEVs can also improve longitudinal vehicle dynamics with respect to acceleration and engine elasticity. The objective of this study is to investigate potential of concurrent optimization of fuel efficiency and driving performance. For the studies, a backward vehicle model for a parallel PHEV was designed, where the power flow is calculated from the wheels to the propulsion units, the conventional ICE （internal combustion engine） and the EMG （electric motor/generator） unit. The hybrid drive train is according to a P2 layout, consequently the EMG is situated between the shifting clutch and the ICE. The implemented operation strategy distributes the power to both propulsion units depending on the vehicle speed, requested driving torque, the battery＇s SOC （state of charge） and SOP （state of power）. Additional information, such as the slope of the road, can be taken into account by the operation strategy. In the paper, the fuel saving potential as well as the longitudinal dynamics change of different PHEV configurations is presented as a function of battery capacity and EMG power. Consequently, applicable hybrid components can be defined. By using additional information of the environment like various sensor data, road slope amongst others, the fuel saving potential can be improved even more. By studying the dynamic model, the overall results of the backward model are confirmed. In conclusion, this study shows that it is possible to concurrently reduce fuel consumption and increase driving performance in PHEVs. The potential depends strongly on the configuration of the electric components and the implemented operation strategy. Consequently, the hybrid system configuration has to be chosen carefully and aligned to the vehicle performance.

Designing the cooling system of a hybrid electric vehicle with multi-heat source

In order to reduce the power consumption and meet the cooling demand of every heat source component, three kinds of multi-heat source cooling system schemes were designed base on the characteristic of power split hybrid electric vehicle （HEV）. Using the numerical simulation meth- od, the power system heat transfer model was built. By comparing the performance of three differ- ent schemes through the Simulink simulation, the best cooling system scheme was found. Base on characteristics of these cooling system structures, the reasonableness of the simulation results were analyzed and verified. The results showed that the cooling system designation based on the numerical simulation could describe the cooling system performance accurately. This method could simplify the design process, improve design efficiency and provide a new way for designing a multi-heat source vehicle cooling system.

Design of Engine-Generator Work Mode for Hybrid Electric Vehicle

From electric circuit theory view, a system model of series hybrid electric vehicle was built which uses engine-generator and battery pack as its on-board energy source in this paper. Based on the analysis for the constant power work mode and constant bus voltage work mode of engine-generator, a third work mode was put forward which combined the advantages of constant power and constant bus voltage work modes. The new work mode is reasonable to keep the battery in good working conditions and to extend its life. Also the working conditions of engine can be bettered to get low pollution and high efficiency.

Series-parallel Hybrid Vehicle Control Strategy Design and Optimization Using Real-valued Genetic Algorithm

Despite the series-parallel hybrid electric vehicle inherits the performance advantages from both series and parallel hybrid electric vehicle, few researches about the series-parallel hybrid electric vehicle have been revealed because of its complex co nstruction and control strategy. In this paper, a series-parallel hybrid electric bus as well as its control strategy is revealed, and a control parameter optimization approach using the real-valued genetic algorithm is proposed. The optimization objective is to minimize the fuel consumption while sustain the battery state of charge, a tangent penalty function of state of charge（SOC） is embodied in the objective function to recast this multi-objective nonlinear optimization problem as a single linear optimization problem. For this strategy, the vehicle operating mode is switched based on the vehicle speed, and an ＂optimal line＂ typed strategy is designed for the parallel control. The optimization parameters include the speed threshold for mode switching, the highest state of charge allowed, the lowest state of charge allowed and the scale factor of the engine optimal torque to the engine maximum torque at a rotational speed. They are optimized through numerical experiments based on real-value genes, arithmetic crossover and mutation operators. The hybrid bus has been evaluated at the Chinese Transit Bus City Driving Cycle via road test, in which a control area network-based monitor system was used to trace the driving schedule. The test result shows that this approach is feasible for the control parameter optimization. This approach can be applied to not only the novel construction presented in this paper, but also other types of hybrid electric vehicles.

The design analyze of new hybrid drive concept

This paper presents the design method of hybrid drive system for the minibus with some limited conditions. The approach of design hybrid drive system is based on the dynamic modeling and simulation of the hybrid minibus with planetary gear system. The main target of the design is to obtain the optimal design with the proper hybrid drive configuration and control for a given set of design constraints. In oder to meet the design target, it＇s necessary to adjust some parameters such as mechanical ratios and parameters of battery pack as well as control by simulation. During simulation the transient operating process can be studied in details with the dynamic model in Matlab/Simulink. The control strategy can be optimized by running the simulation and monitoring the operation of each components： the operating area of internal combustion engine （ICE）, fuel consumption （energy consumption）, the power distribution, the torque and rotary speed of ICE and motor, the operating efficiency of motor, the aheration of battery state of charge （SOC）, current and voltage.

Study on ultracapacitor-battery hybrid power system for PHEV applications

For the battery only power system is hard to meet the energy and power requirements reasonably, a hybrid power system with uhracapacitor and battery is studied. A Topology structure is analyzed that the uhracapacitor system is connected with battery pack parallel after a bidirectional DC/DC converter. The ultracapacitor, battery and the hybrid power system are modeled. For the plug-in hybrid electric vehicle （PHEV） application, the control target and control strategy of the hybrid power system are put forward. From the simulation results based on the Chinese urban driving cycle, the hybrid power system could meet the peak power requirements reasonably while the battery pack＇ s current is controlled in a reasonable limit which will be helpful to optimize the battery pack＇ s working conditions to get long cycling life and high efficiency.

Controlling Torque Distribution for Parallel Hybrid Vehicle Based on Hierarchical Structure Fuzzy Logic

The Hierarchical Structure Fuzzy Logic Control (HSFLC) strategies of torque distribute for Parallel Hybrid Electric Vehicle (PHEV) in the mode of operation of the vehicle i. e. , acceleration, cruise, deceleration etc. have been studied. Using secondly developed the hybrid vehicle simulation tool ADVISOR, the dynamic model of PHEV has been set up by MATLAB/SIMULINK. The engine, motor as well as the battery characteristics have been studied. Simulation results show that the proposed hierarchical structured fuzzy logic control strategy is effective over the entire operating range of the vehicle in terms of fuel economy. Based on the analyses of the simulation results and driver’s experiences, a fuzzy controller is designed and developed to control the torque distribution. The controller is evaluated via hardware-in-the-loop simulator (HILS). The results show that controller verify its value.

串并联混合动力变速箱挡位对整车性能的影响

针对串并联混合动力车辆变速箱选型匹配问题,采用试验设计(DOE)方法选取变速箱最优速比并分析挡位对整车性能的影响。建立了整车仿真模型和控制策略并进行了台架验证,分析了该混合动力系统3种变速箱挡位配置对车辆的加速性能、爬坡性能和整车油耗的影响。仿真结果表明,挡位的增多可以提高整车动力性,降低整车对电池放电功率及电池容量的需求,但是对整车油耗改善较小。进一步仿真结果表明,即使改善发动机低转速中高负荷区域的燃油消耗率,变速箱挡位数对整车油耗的影响也不大。