The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for num...The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for numerically simulating and analyzing the unsteady flow and aerodynamic noise in an expansion chamber under the influence of airflow.A fluid simulation model is established,utilizing the Large Eddy Simulation(LES)method to calculate the unsteady flow within the expansion chamber.The simulation results effectively capture the development and changes of the unsteady flow and vorticity inside the cavity,exhibiting a high level of consistency with experimental observations.To calculate the aerodynamic noise sources within the cavity,the flow field results are integrated using the method of integral interpolation and inserted into the acoustic grid.The acoustic analogy method is then employed to determine the aerodynamic noise sources.An acoustic simulation model is established,and the flow noise source is imported into the sound field grid to calculate the sound pressure at the far-field response point.The calculated sound pressure levels and resonance frequencies show good agreement with the experimental results.To address the issue of airflow regeneration noise within the cavity,perforated tubes are selected as a means of noise suppression.An experimental platformfor airflow regeneration noise is constructed,and experimental samples are processed to analyze and verify the noise suppression effect of perforated tube expansion cavities under different airflow velocities.The research findings indicate that the perforated tube expansion cavity can effectively suppress low-frequency aerodynamic noise within the cavity by impeding the formation of strong shear layers.Moreover,the semi-perforated tube expansion cavity demonstrates the most effective suppression of aerodynamic noise.展开更多
Public-private partnerships(PPPs)have been used by governments around the world to procure and construct infrastructural amenities.It relies on private sector expertise and funding to achieve this lofty objective.Howe...Public-private partnerships(PPPs)have been used by governments around the world to procure and construct infrastructural amenities.It relies on private sector expertise and funding to achieve this lofty objective.However,given the uncertainties of project management,transparency,accountability,and expropriation,this phenomenon has gained tremendous attention in recent years due to the important role it plays in curbing infrastructural deficits globally.Interestingly,the reasonable benefit distribution scheme in a PPP project is related to the behavior decisionmaking of the government and social capital,aswell as the performance of the project.In this paper,the government and social capital which are the key stakeholders of PPP projects were selected as the research objects.Based on the fuzzy expected value model and game theory,a hybrid method was adopted in this research taking into account the different risk preferences of both public entities and private parties under the fuzzy demand environment.To alleviate the problem of insufficient utilization of social capital in a PPP project,this paper seeks to grasp the relationship that exists between the benefit distribution of stakeholders,their behavioral decision-making,and project performance,given that they impact the performance of both public entities and private parties,as well as assist in maximizing the overall utility of the project.Furthermore,four game models were constructed in this study,while the expected value and opportunity-constrained programming model for optimal decision-making were derived using alternate perspectives of both centralized decision-making and decentralized decision-making.Afterward,the optimal behavioral decision-making of public entities and private parties in four scenarios was discussed and thereafter compared,which led to an ensuing discussion on the benefit distribution system under centralized decision-making.Lastly,based on an example case,the influence of different confidence levels,price,and fuzzy uncertainties of PPP projects on the equilibrium strategy results of both parties were discussed,giving credence to the effectiveness of the hybrid method.The results indicate that adjusting different confidence levels yields different equilibriumpoints,and therefore signposts that social capital has a fair perception of opportunities,as well as identifies reciprocal preferences.Nevertheless,we find that an increase in the cost coefficient of the government and social capital does not inhibit the effort of both parties.Our results also indicate that a reasonable benefit distribution of PPP projects can assist them in realizing optimum Pareto improvements over time.The results provide us with very useful strategies and recommendations to improve the overall performance of PPP projects in China.展开更多
A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinite...A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinitely long conducting target with arbitrary cross section and a one-dimensional (1D) Gaussian rough surface. The electromagnetic scattering region in the HM is split into KA region and MOM region. The electric field integral equation (EFIE) in MOM region (target) is derived, the computational time of the HM depends mainly on the number of unknowns of the target. The bistatic scattering coefficient for the infinitely long cylinder above the rough surface with Gaussian roughness spectrum is calculated, and the numerical results are compared and verified with those obtained by the conventional MOM, which shows the high efficiency of the HM. Finally, the influence of the size, location of the target, the rms height and correlation length of the rough surface on the bistatic scattering coefficient with different polarizations is discussed in detail.展开更多
The distribution of stress and strain fields in a micro-structuralarea of a particle reinforced composite is studied by a combinationof experimental and numerical method (hybrid method). With the ex-perimental values ...The distribution of stress and strain fields in a micro-structuralarea of a particle reinforced composite is studied by a combinationof experimental and numerical method (hybrid method). With the ex-perimental values of displacements in a micro-region as the boundaryloading condition, strain and stress fields inside the micro-regionare calculated by the finite element method under tow different kindsof model- ing, namely, as pale stress and plane strain condition. Thedifferences between the two kinds of modeling conditions as appliedto micro-structural areas are discussed.展开更多
A hybrid method of continuum and particle dynamics is developed for micro- and nano-fluidics, where fluids are described by a molecular dynamics (MD) in one domain and by the Navier-Stokes (NS) equations in anothe...A hybrid method of continuum and particle dynamics is developed for micro- and nano-fluidics, where fluids are described by a molecular dynamics (MD) in one domain and by the Navier-Stokes (NS) equations in another domain. In order to ensure the continuity of momentum flux, the continuum and molecular dynamics in the overlap domain are coupled through a constrained particle dynamics. The constrained particle dynamics is constructed with a virtual damping force and a virtual added mass force. The sudden-start Couette flows with either non-slip or slip boundary condition are used to test the hybrid method. It is shown that the results obtained are quantitatively in agreement with the analytical solutions under the non-slip boundary conditions and the full MD simulations under the slip bound- ary conditions.展开更多
Composite,diffusive titanium nitride layers formed on a titanium and aluminum sub-layer were produced on the AZ91D magnesium alloy.The layers were obtained using a hybrid method which combined the PVD processes with t...Composite,diffusive titanium nitride layers formed on a titanium and aluminum sub-layer were produced on the AZ91D magnesium alloy.The layers were obtained using a hybrid method which combined the PVD processes with the final sealing by a hydrothermal treatment.The microstructure,resistance to corrosion,mechanical damage,and frictional wear of the layers were examined.The properties of the AZ91D alloy covered with these layers were compared with those of the untreated alloy and of some engineering materials such as 316L stainless steel,100Cr6 bearing steel,and the AZ91D alloy subjected to commercial anodizing.It has been found that the composite diffusive nitride layer produced on the AZ91D alloy and then sealed by the hydrothermal treatment ensures the corrosion resistance comparable with that of 316L stainless steel.The layers are characterized by higher electrochemical durability which is due to the surface being overbuilt with the titanium oxides formed,as shown by the XPS examinations,from titanium nitride during the hydrothermal treatment.The composite titanium nitride layers exhibit high resistance to mechanical damage and wear,including frictional wear which is comparable with that of 100Cr6 bearing steel.The performance properties of the AZ91D magnesium alloy covered with the composite titanium nitride coating are substantially superior to those of the alloy subjected to commercial anodizing which is the dominant technique employed in industrial practice.展开更多
In the field of information security,a gap exists in the study of coreference resolution of entities.A hybrid method is proposed to solve the problem of coreference resolution in information security.The work consists...In the field of information security,a gap exists in the study of coreference resolution of entities.A hybrid method is proposed to solve the problem of coreference resolution in information security.The work consists of two parts:the first extracts all candidates(including noun phrases,pronouns,entities,and nested phrases)from a given document and classifies them;the second is coreference resolution of the selected candidates.In the first part,a method combining rules with a deep learning model(Dictionary BiLSTM-Attention-CRF,or DBAC)is proposed to extract all candidates in the text and classify them.In the DBAC model,the domain dictionary matching mechanism is introduced,and new features of words and their contexts are obtained according to the domain dictionary.In this way,full use can be made of the entities and entity-type information contained in the domain dictionary,which can help solve the recognition problem of both rare and long entities.In the second part,candidates are divided into pronoun candidates and noun phrase candidates according to the part of speech,and the coreference resolution of pronoun candidates is solved by making rules and coreference resolution of noun phrase candidates by machine learning.Finally,a dataset is created with which to evaluate our methods using information security data.The experimental results show that the proposed model exhibits better performance than the other baseline models.展开更多
The basic relations in linear isotropic photoviscoelasticity have been theoretically discussed in de- tails.A new routine has been found to obtain the time-dependent principal stress without the measurement of isoclin...The basic relations in linear isotropic photoviscoelasticity have been theoretically discussed in de- tails.A new routine has been found to obtain the time-dependent principal stress without the measurement of isoclinics.As a test of our method,examples are given at the end of this paper.展开更多
Flow birefringent method and its data processing was reviewed and a new hybrid method of flow birefringence and boundary integration was introduced. The basic equations and boundary conditions suitable to the hybrid m...Flow birefringent method and its data processing was reviewed and a new hybrid method of flow birefringence and boundary integration was introduced. The basic equations and boundary conditions suitable to the hybrid method were derived, and a comparison of the hybrid and other classical methods was given. Finally as an example, the flow in a step converging tube was analyzed by the given method.展开更多
In this paper, a novel hybrid method is presented for finding global optimization of an objective function. Based on the interval computation, this hybrid method combines interval deterministic method and stochastic e...In this paper, a novel hybrid method is presented for finding global optimization of an objective function. Based on the interval computation, this hybrid method combines interval deterministic method and stochastic evolution method. It can find global optimization quickly while ensuring the deterministic and stability of the algorithm. When using interval computation, extra width constraints accuracy of interval computation results. In this paper, a splitting method to reduce the extra width is introduced. This method is easy and it can get a more precise interval computation result. When finding the global optimization, it can increase the efficiency of pruning. Several experiments are given to illustrate the advantage of the new hybrid method.展开更多
An improved hybrid method is introduced in this paper as a numerical method to reconstruct the scatterer by far-field pattern for just one incident direction with unknown physical properties of the scatterer. The impr...An improved hybrid method is introduced in this paper as a numerical method to reconstruct the scatterer by far-field pattern for just one incident direction with unknown physical properties of the scatterer. The improved hybrid method inherits the idea of the hybrid method by Kress and Serranho which is a combination of Newton and decomposition method, and it improves the hybrid method by introducing a general boundary condition. The numerical experiments show the feasibility of this method.展开更多
In this paper two implicit 2-step hybrid methods are proposed! one has order five, the other six. The stability properties of the methods are analysed. The 5th order method is proved to be A-stable and the 6th order o...In this paper two implicit 2-step hybrid methods are proposed! one has order five, the other six. The stability properties of the methods are analysed. The 5th order method is proved to be A-stable and the 6th order one is not, but still has a relatively large region of absolute stability. The implementation of the 5th order method is also discussed.展开更多
Based on the efficient hybrid methods for solving initial value problems of stiff ODEs, this paper derives a parallel scheme that can be used to solve the problems on parallel computers with N processors, and discusse...Based on the efficient hybrid methods for solving initial value problems of stiff ODEs, this paper derives a parallel scheme that can be used to solve the problems on parallel computers with N processors, and discusses the iteratively B-convergence of the Newton iterative process, finally, the paper provides some numberical results which show that the parallel scheme is highly efficient as N is not too large.展开更多
By using Fukushima's differentiable merit function,Taji,Fukushima and Ibaraki have given a globally convergent modified Newton method for the strongly monotone variational inequality problem and proved their metho...By using Fukushima's differentiable merit function,Taji,Fukushima and Ibaraki have given a globally convergent modified Newton method for the strongly monotone variational inequality problem and proved their method to be quadratically convergent under certain assumptions in 1993.In this paper a hybrid method for the variational inequality problem under the assumptions that the mapping F is continuously differentiable and its Jacobian matrix Δ F(x) is positive definite for all x∈S rather than strongly monotone and that the set S is nonempty,polyhedral,closed and convex is proposed.Armijo type line search and trust region strategies as well as Fukushima's differentiable merit function are incorporated into the method.It is then shown that the method is well defined and globally convergent and that,under the same assumptions as those of Taji et al.,the method reduces to the basic Newton method and hence the rate of convergence is quadratic.Computational experiences show the efficiency of the proposed method.展开更多
A homotopy-Newton hybrid method is proposed for predicting azeotropes, in which the set of homotopy equations with larger convergent domain is solved firstly to generate the better initial guess, then Newton algorithm...A homotopy-Newton hybrid method is proposed for predicting azeotropes, in which the set of homotopy equations with larger convergent domain is solved firstly to generate the better initial guess, then Newton algorithm is used to solve the azeotrope equations. It has been proved through some illustrative examples that the hybrid method has concurrently the advantages of the wide range of convergence, flexible demand for initial guess and good smoothness of iterative process as the homotopy algorithm, and the rapid convergent speed and high accuracy as Newton′s method. So the hybrid method is a prospective approach to predicting the azeotropes of nonideal mixtures.展开更多
A negative curvature method is applied to nonlinear least squares problems with indefinite Hessian approximation matrices. With the special structure of the method, a new switch is proposed to form a hybrid method. Nu...A negative curvature method is applied to nonlinear least squares problems with indefinite Hessian approximation matrices. With the special structure of the method, a new switch is proposed to form a hybrid method. Numerical experiments show that this method is feasible and effective for zero-residual, small-residual and large-residual problems.展开更多
Three-layer feedforward networks have been widely used in modeling chemical engineering processes and prior-knowledge-based methods have been introduced to improve their performances.In this paper,we propose the metho...Three-layer feedforward networks have been widely used in modeling chemical engineering processes and prior-knowledge-based methods have been introduced to improve their performances.In this paper,we propose the methodology of designing better prior-knowledge-based hybrid methods by combining the existing ones. Then according to this methodology,two hybrid methods,interpolation-optimization (IO) method and interpolation penalty-function (IPF) method,are designed as examples.Finally,both methods are applied to modeling two cases in chemical engineering to investigate their effectiveness.Simulation results show that the performances of the hybrid methods are better than those of their parents.展开更多
In this paper the existence and uniqueness of the solution of implicit hybrid methods(IHMs)for solving the initial value problems(IVPs)of stiff ordinary differential equations(ODEs)is considered.We provide the coeffic...In this paper the existence and uniqueness of the solution of implicit hybrid methods(IHMs)for solving the initial value problems(IVPs)of stiff ordinary differential equations(ODEs)is considered.We provide the coefficient condition and its judging criterion as well as the righthand condition to ensure the existing solution uniquely.展开更多
The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct n...The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct numerical modeling for this phenomenon can be classified into partitioned or monolithic formulations.Each formulation has its advantages and disadvantages,and the choice depends on the characteristics of each coupled problem.This study proposes a new option:a coupled analysis strategy that combines the best features of the existing formulations,namely,the hybrid partitioned-monolithic method.The analysis of inverse piezoelectricity and the monolithic analysis of direct piezoelectric and circuit interaction are strongly coupled using a partitioned iterative hierarchical algorithm.In a typical benchmark problem of a piezoelectric energy harvester,this research compares the results from the proposed method to those from the conventional strongly coupled partitioned iterative method,discussing the accuracy,stability,and computational cost.The proposed hybrid concept is effective for coupled multi-physics problems,including various coupling conditions.展开更多
With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying micr...With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown significantly.However,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular structures.The HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure interfaces.Initially,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both sides.Subsequently,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent microstructures.The method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology optimization.In essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.展开更多
基金supported by the National Natural Science Foundation of China(NSFC)(Grant Nos.12104153 and 51765017)China Postdoctoral Science Foundation(Grant No.2021M701963)Training Plan for Academic and Technical Leaders of Major Disciplines in Jiangxi Province,China(Grant No.20204BCJL23034).
文摘The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for numerically simulating and analyzing the unsteady flow and aerodynamic noise in an expansion chamber under the influence of airflow.A fluid simulation model is established,utilizing the Large Eddy Simulation(LES)method to calculate the unsteady flow within the expansion chamber.The simulation results effectively capture the development and changes of the unsteady flow and vorticity inside the cavity,exhibiting a high level of consistency with experimental observations.To calculate the aerodynamic noise sources within the cavity,the flow field results are integrated using the method of integral interpolation and inserted into the acoustic grid.The acoustic analogy method is then employed to determine the aerodynamic noise sources.An acoustic simulation model is established,and the flow noise source is imported into the sound field grid to calculate the sound pressure at the far-field response point.The calculated sound pressure levels and resonance frequencies show good agreement with the experimental results.To address the issue of airflow regeneration noise within the cavity,perforated tubes are selected as a means of noise suppression.An experimental platformfor airflow regeneration noise is constructed,and experimental samples are processed to analyze and verify the noise suppression effect of perforated tube expansion cavities under different airflow velocities.The research findings indicate that the perforated tube expansion cavity can effectively suppress low-frequency aerodynamic noise within the cavity by impeding the formation of strong shear layers.Moreover,the semi-perforated tube expansion cavity demonstrates the most effective suppression of aerodynamic noise.
基金supported by the National Natural Science Foundation of China(No.62141302)the Humanities Social Science Programming Project of the Ministry of Education of China(No.20YJA630059)+2 种基金the Natural Science Foundation of Jiangxi Province of China(No.20212BAB201011)the China Postdoctoral Science Foundation(No.2019M662265)the Research Project of Economic and Social Development in Liaoning Province of China(No.2022lslybkt-053).
文摘Public-private partnerships(PPPs)have been used by governments around the world to procure and construct infrastructural amenities.It relies on private sector expertise and funding to achieve this lofty objective.However,given the uncertainties of project management,transparency,accountability,and expropriation,this phenomenon has gained tremendous attention in recent years due to the important role it plays in curbing infrastructural deficits globally.Interestingly,the reasonable benefit distribution scheme in a PPP project is related to the behavior decisionmaking of the government and social capital,aswell as the performance of the project.In this paper,the government and social capital which are the key stakeholders of PPP projects were selected as the research objects.Based on the fuzzy expected value model and game theory,a hybrid method was adopted in this research taking into account the different risk preferences of both public entities and private parties under the fuzzy demand environment.To alleviate the problem of insufficient utilization of social capital in a PPP project,this paper seeks to grasp the relationship that exists between the benefit distribution of stakeholders,their behavioral decision-making,and project performance,given that they impact the performance of both public entities and private parties,as well as assist in maximizing the overall utility of the project.Furthermore,four game models were constructed in this study,while the expected value and opportunity-constrained programming model for optimal decision-making were derived using alternate perspectives of both centralized decision-making and decentralized decision-making.Afterward,the optimal behavioral decision-making of public entities and private parties in four scenarios was discussed and thereafter compared,which led to an ensuing discussion on the benefit distribution system under centralized decision-making.Lastly,based on an example case,the influence of different confidence levels,price,and fuzzy uncertainties of PPP projects on the equilibrium strategy results of both parties were discussed,giving credence to the effectiveness of the hybrid method.The results indicate that adjusting different confidence levels yields different equilibriumpoints,and therefore signposts that social capital has a fair perception of opportunities,as well as identifies reciprocal preferences.Nevertheless,we find that an increase in the cost coefficient of the government and social capital does not inhibit the effort of both parties.Our results also indicate that a reasonable benefit distribution of PPP projects can assist them in realizing optimum Pareto improvements over time.The results provide us with very useful strategies and recommendations to improve the overall performance of PPP projects in China.
基金Project supported by the National Natural Science Foundation of China (Grant No 60571058)the Specialized Research Fund for the Doctoral Program of Higher Education, China
文摘A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinitely long conducting target with arbitrary cross section and a one-dimensional (1D) Gaussian rough surface. The electromagnetic scattering region in the HM is split into KA region and MOM region. The electric field integral equation (EFIE) in MOM region (target) is derived, the computational time of the HM depends mainly on the number of unknowns of the target. The bistatic scattering coefficient for the infinitely long cylinder above the rough surface with Gaussian roughness spectrum is calculated, and the numerical results are compared and verified with those obtained by the conventional MOM, which shows the high efficiency of the HM. Finally, the influence of the size, location of the target, the rms height and correlation length of the rough surface on the bistatic scattering coefficient with different polarizations is discussed in detail.
基金the National Natural Science Foundation of China(19972046)National Overseas Study Foundation
文摘The distribution of stress and strain fields in a micro-structuralarea of a particle reinforced composite is studied by a combinationof experimental and numerical method (hybrid method). With the ex-perimental values of displacements in a micro-region as the boundaryloading condition, strain and stress fields inside the micro-regionare calculated by the finite element method under tow different kindsof model- ing, namely, as pale stress and plane strain condition. Thedifferences between the two kinds of modeling conditions as appliedto micro-structural areas are discussed.
基金The project supported by Chinese Academy of Sciences under the innovative project "Multi-scale modelling and simulation in complex system" (KJCX-SW-L08)National Natural Science Foundation of China (10325211)
文摘A hybrid method of continuum and particle dynamics is developed for micro- and nano-fluidics, where fluids are described by a molecular dynamics (MD) in one domain and by the Navier-Stokes (NS) equations in another domain. In order to ensure the continuity of momentum flux, the continuum and molecular dynamics in the overlap domain are coupled through a constrained particle dynamics. The constrained particle dynamics is constructed with a virtual damping force and a virtual added mass force. The sudden-start Couette flows with either non-slip or slip boundary condition are used to test the hybrid method. It is shown that the results obtained are quantitatively in agreement with the analytical solutions under the non-slip boundary conditions and the full MD simulations under the slip bound- ary conditions.
文摘Composite,diffusive titanium nitride layers formed on a titanium and aluminum sub-layer were produced on the AZ91D magnesium alloy.The layers were obtained using a hybrid method which combined the PVD processes with the final sealing by a hydrothermal treatment.The microstructure,resistance to corrosion,mechanical damage,and frictional wear of the layers were examined.The properties of the AZ91D alloy covered with these layers were compared with those of the untreated alloy and of some engineering materials such as 316L stainless steel,100Cr6 bearing steel,and the AZ91D alloy subjected to commercial anodizing.It has been found that the composite diffusive nitride layer produced on the AZ91D alloy and then sealed by the hydrothermal treatment ensures the corrosion resistance comparable with that of 316L stainless steel.The layers are characterized by higher electrochemical durability which is due to the surface being overbuilt with the titanium oxides formed,as shown by the XPS examinations,from titanium nitride during the hydrothermal treatment.The composite titanium nitride layers exhibit high resistance to mechanical damage and wear,including frictional wear which is comparable with that of 100Cr6 bearing steel.The performance properties of the AZ91D magnesium alloy covered with the composite titanium nitride coating are substantially superior to those of the alloy subjected to commercial anodizing which is the dominant technique employed in industrial practice.
基金This work was supported by the National Natural Science Foundation of China(grant no.61602515).
文摘In the field of information security,a gap exists in the study of coreference resolution of entities.A hybrid method is proposed to solve the problem of coreference resolution in information security.The work consists of two parts:the first extracts all candidates(including noun phrases,pronouns,entities,and nested phrases)from a given document and classifies them;the second is coreference resolution of the selected candidates.In the first part,a method combining rules with a deep learning model(Dictionary BiLSTM-Attention-CRF,or DBAC)is proposed to extract all candidates in the text and classify them.In the DBAC model,the domain dictionary matching mechanism is introduced,and new features of words and their contexts are obtained according to the domain dictionary.In this way,full use can be made of the entities and entity-type information contained in the domain dictionary,which can help solve the recognition problem of both rare and long entities.In the second part,candidates are divided into pronoun candidates and noun phrase candidates according to the part of speech,and the coreference resolution of pronoun candidates is solved by making rules and coreference resolution of noun phrase candidates by machine learning.Finally,a dataset is created with which to evaluate our methods using information security data.The experimental results show that the proposed model exhibits better performance than the other baseline models.
文摘The basic relations in linear isotropic photoviscoelasticity have been theoretically discussed in de- tails.A new routine has been found to obtain the time-dependent principal stress without the measurement of isoclinics.As a test of our method,examples are given at the end of this paper.
基金The project supported by National Natural Science Foundation of China (NSFC)
文摘Flow birefringent method and its data processing was reviewed and a new hybrid method of flow birefringence and boundary integration was introduced. The basic equations and boundary conditions suitable to the hybrid method were derived, and a comparison of the hybrid and other classical methods was given. Finally as an example, the flow in a step converging tube was analyzed by the given method.
基金Project supported by the Natural High-Technology Research and Development Program of China(Grant No.2009AA012201)the Major Technology Research and Development Program of Shanghai Municipality(Grant No.08DZ501600)the Shanghai Leading Academic Discipline Project(Grant No.J50103)
文摘In this paper, a novel hybrid method is presented for finding global optimization of an objective function. Based on the interval computation, this hybrid method combines interval deterministic method and stochastic evolution method. It can find global optimization quickly while ensuring the deterministic and stability of the algorithm. When using interval computation, extra width constraints accuracy of interval computation results. In this paper, a splitting method to reduce the extra width is introduced. This method is easy and it can get a more precise interval computation result. When finding the global optimization, it can increase the efficiency of pruning. Several experiments are given to illustrate the advantage of the new hybrid method.
基金The Major State Research Development Program(2005CB321701) of China
文摘An improved hybrid method is introduced in this paper as a numerical method to reconstruct the scatterer by far-field pattern for just one incident direction with unknown physical properties of the scatterer. The improved hybrid method inherits the idea of the hybrid method by Kress and Serranho which is a combination of Newton and decomposition method, and it improves the hybrid method by introducing a general boundary condition. The numerical experiments show the feasibility of this method.
文摘In this paper two implicit 2-step hybrid methods are proposed! one has order five, the other six. The stability properties of the methods are analysed. The 5th order method is proved to be A-stable and the 6th order one is not, but still has a relatively large region of absolute stability. The implementation of the 5th order method is also discussed.
文摘Based on the efficient hybrid methods for solving initial value problems of stiff ODEs, this paper derives a parallel scheme that can be used to solve the problems on parallel computers with N processors, and discusses the iteratively B-convergence of the Newton iterative process, finally, the paper provides some numberical results which show that the parallel scheme is highly efficient as N is not too large.
基金Project supported by the National Natural Science Foundation of China (1 9971 0 65)
文摘By using Fukushima's differentiable merit function,Taji,Fukushima and Ibaraki have given a globally convergent modified Newton method for the strongly monotone variational inequality problem and proved their method to be quadratically convergent under certain assumptions in 1993.In this paper a hybrid method for the variational inequality problem under the assumptions that the mapping F is continuously differentiable and its Jacobian matrix Δ F(x) is positive definite for all x∈S rather than strongly monotone and that the set S is nonempty,polyhedral,closed and convex is proposed.Armijo type line search and trust region strategies as well as Fukushima's differentiable merit function are incorporated into the method.It is then shown that the method is well defined and globally convergent and that,under the same assumptions as those of Taji et al.,the method reduces to the basic Newton method and hence the rate of convergence is quadratic.Computational experiences show the efficiency of the proposed method.
文摘A homotopy-Newton hybrid method is proposed for predicting azeotropes, in which the set of homotopy equations with larger convergent domain is solved firstly to generate the better initial guess, then Newton algorithm is used to solve the azeotrope equations. It has been proved through some illustrative examples that the hybrid method has concurrently the advantages of the wide range of convergence, flexible demand for initial guess and good smoothness of iterative process as the homotopy algorithm, and the rapid convergent speed and high accuracy as Newton′s method. So the hybrid method is a prospective approach to predicting the azeotropes of nonideal mixtures.
文摘A negative curvature method is applied to nonlinear least squares problems with indefinite Hessian approximation matrices. With the special structure of the method, a new switch is proposed to form a hybrid method. Numerical experiments show that this method is feasible and effective for zero-residual, small-residual and large-residual problems.
基金Supported by the National Natural Science Foundation of China (No. 20076041)
文摘Three-layer feedforward networks have been widely used in modeling chemical engineering processes and prior-knowledge-based methods have been introduced to improve their performances.In this paper,we propose the methodology of designing better prior-knowledge-based hybrid methods by combining the existing ones. Then according to this methodology,two hybrid methods,interpolation-optimization (IO) method and interpolation penalty-function (IPF) method,are designed as examples.Finally,both methods are applied to modeling two cases in chemical engineering to investigate their effectiveness.Simulation results show that the performances of the hybrid methods are better than those of their parents.
基金Supported by the national natural science foundation.
文摘In this paper the existence and uniqueness of the solution of implicit hybrid methods(IHMs)for solving the initial value problems(IVPs)of stiff ordinary differential equations(ODEs)is considered.We provide the coefficient condition and its judging criterion as well as the righthand condition to ensure the existing solution uniquely.
基金supported by the Japan Society for the Promotion of Science,KAKENHI Grant No.23H00475.
文摘The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct numerical modeling for this phenomenon can be classified into partitioned or monolithic formulations.Each formulation has its advantages and disadvantages,and the choice depends on the characteristics of each coupled problem.This study proposes a new option:a coupled analysis strategy that combines the best features of the existing formulations,namely,the hybrid partitioned-monolithic method.The analysis of inverse piezoelectricity and the monolithic analysis of direct piezoelectric and circuit interaction are strongly coupled using a partitioned iterative hierarchical algorithm.In a typical benchmark problem of a piezoelectric energy harvester,this research compares the results from the proposed method to those from the conventional strongly coupled partitioned iterative method,discussing the accuracy,stability,and computational cost.The proposed hybrid concept is effective for coupled multi-physics problems,including various coupling conditions.
基金the National Key Research and Development Program of China(Grant Number 2021YFB1714600)the National Natural Science Foundation of China(Grant Number 52075195)the Fundamental Research Funds for the Central Universities,China through Program No.2172019kfyXJJS078.
文摘With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown significantly.However,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular structures.The HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure interfaces.Initially,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both sides.Subsequently,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent microstructures.The method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology optimization.In essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.