Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely ...Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely applied because of the high power density of supercapacitors. In this study, we design a hybrid powertrain system containing two porous carbon electrode-based supercapacitor modules in parallel and one lithium ion battery pack. With the construction of the testing station, the performance and stability of the used supercapacitor modules are investigated in correlation with the structure of the supercapacitor and the nature of the electrode materials applied. It has been shown that the responding time for voltage vibration from 20 V to 48.5 V during charging or discharging process decreases from about 490 s to 94 s with the increase in applied current from 20 A to 100 A. The capacitance of the capacitor modules is nearly independent on the applied current. With the designed setup, the energy efficiency can reach as high as 0.99. The results described here provide a guidance for material selection of supercapacitors and optimized controlling strategy for hybrid power system applied in electric vehicles.展开更多
A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet co...A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies.展开更多
Energy management（EM） is a core technique of hybrid electric bus（HEB） in order to advance fuel economy performance optimization and is unique for the corresponding configuration. There are existing algorithms of c...Energy management（EM） is a core technique of hybrid electric bus（HEB） in order to advance fuel economy performance optimization and is unique for the corresponding configuration. There are existing algorithms of control strategy seldom take battery power management into account with international combustion engine power management. In this paper, a type of power-balancing instantaneous optimization（PBIO） energy management control strategy is proposed for a novel series-parallel hybrid electric bus. According to the characteristic of the novel series-parallel architecture, the switching boundary condition between series and parallel mode as well as the control rules of the power-balancing strategy are developed. The equivalent fuel model of battery is implemented and combined with the fuel of engine to constitute the objective function which is to minimize the fuel consumption at each sampled time and to coordinate the power distribution in real-time between the engine and battery. To validate the proposed strategy effective and reasonable, a forward model is built based on Matlab/Simulink for the simulation and the dSPACE autobox is applied to act as a controller for hardware in-the-loop integrated with bench test. Both the results of simulation and hardware-in-the-loop demonstrate that the proposed strategy not only enable to sustain the battery SOC within its operational range and keep the engine operation point locating the peak efficiency region, but also the fuel economy of series-parallel hybrid electric bus（SPHEB） dramatically advanced up to 30.73% via comparing with the prototype bus and a similar improvement for PBIO strategy relative to rule-based strategy, the reduction of fuel consumption is up to 12.38%. The proposed research ensures the algorithm of PBIO is real-time applicability, improves the efficiency of SPHEB system, as well as suite to complicated configuration perfectly.展开更多
Energy management strategy (EMS) is the core of the real-time controlalgorithm of the hybrid electric vehicle (HEV). A novel EMS using the logic threshold approach withincorporation of a stand-by optimization algorith...Energy management strategy (EMS) is the core of the real-time controlalgorithm of the hybrid electric vehicle (HEV). A novel EMS using the logic threshold approach withincorporation of a stand-by optimization algorithm is proposed. The aim of it is to minimize theengine fuel consumption and maintain the battery state of charge (SOC) in its operation range, whilesatisfying the vehicle performance and drivability requirements. The hybrid powertrain bench testis carried out to collect data of the engine, motor and battery pack, which are used in the EMS tocontrol the powertrain. Computer simulation model of the HEV is established in the MATLAB/Simulinkenvironment according to the bench test results. Simulation results are presented for behaviors ofthe engine, motor and battery. The proposed EMS is implemented for a real parallel hybrid carcontrol system and validated by vehicle field tests.展开更多
With an increasing number of vehicles with alternative powertrains, the choice of the most appropriate powertrain system for a vehicle class or a load cycle is challenging. This paper introduces a method to design an ...With an increasing number of vehicles with alternative powertrains, the choice of the most appropriate powertrain system for a vehicle class or a load cycle is challenging. This paper introduces a method to design an optimal alternative powertrain based on a longitudinal dynamic simulation. The objective function of the minimization problem describes the characteristic map of the traction system. The goal of the optimization is to minimize fuel consumption respectively energy demand. Different types of propulsion systems are investigated. The results show that the proposed method delivers useful alternative powertrains by applying an optimization with reasonable restrictions.展开更多
设计氢燃料电池-锂电池混合动力系统,利用AVL-CRUISE软件构建整车动力系统模型,基于新欧洲行驶测试循环(new European driving cycle,NEDC)对氢燃料电池各主要部件功耗、氢燃料电池性能、锂电池性能、氢燃料电池进气流量进行仿真验证系...设计氢燃料电池-锂电池混合动力系统,利用AVL-CRUISE软件构建整车动力系统模型,基于新欧洲行驶测试循环(new European driving cycle,NEDC)对氢燃料电池各主要部件功耗、氢燃料电池性能、锂电池性能、氢燃料电池进气流量进行仿真验证系统的经济性和合理性。结果表明:NEDC全工况下,各部件中空压机的功耗最大,且与车速正相关;全工况耗氢量为0.089 kg,总行驶里程为10.926 km,耗氢量较低,经济性较好;氢燃料电池堆内工作温度为66~77℃,符合60~80℃的温度要求;锂电池在城市工况输出功率占比大于郊区工况输出功率占比;氢气过量系数为1.1~1.5,满足动力系统不同功率输出要求;实际空气流量与设定目标接近,控制效果较好。展开更多
基金Funded by the National Key Basic Research Development Program of China(973 Plan)(No.2013CB632505)the National Natural Science Foundation of China(51477125)the Scientific Research Foundation for the Returned Overseas Chinese Scholars
文摘Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely applied because of the high power density of supercapacitors. In this study, we design a hybrid powertrain system containing two porous carbon electrode-based supercapacitor modules in parallel and one lithium ion battery pack. With the construction of the testing station, the performance and stability of the used supercapacitor modules are investigated in correlation with the structure of the supercapacitor and the nature of the electrode materials applied. It has been shown that the responding time for voltage vibration from 20 V to 48.5 V during charging or discharging process decreases from about 490 s to 94 s with the increase in applied current from 20 A to 100 A. The capacitance of the capacitor modules is nearly independent on the applied current. With the designed setup, the energy efficiency can reach as high as 0.99. The results described here provide a guidance for material selection of supercapacitors and optimized controlling strategy for hybrid power system applied in electric vehicles.
文摘A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies.
基金supported by National Natural Science Foundation of China(Grant No. 51075410)
文摘Energy management（EM） is a core technique of hybrid electric bus（HEB） in order to advance fuel economy performance optimization and is unique for the corresponding configuration. There are existing algorithms of control strategy seldom take battery power management into account with international combustion engine power management. In this paper, a type of power-balancing instantaneous optimization（PBIO） energy management control strategy is proposed for a novel series-parallel hybrid electric bus. According to the characteristic of the novel series-parallel architecture, the switching boundary condition between series and parallel mode as well as the control rules of the power-balancing strategy are developed. The equivalent fuel model of battery is implemented and combined with the fuel of engine to constitute the objective function which is to minimize the fuel consumption at each sampled time and to coordinate the power distribution in real-time between the engine and battery. To validate the proposed strategy effective and reasonable, a forward model is built based on Matlab/Simulink for the simulation and the dSPACE autobox is applied to act as a controller for hardware in-the-loop integrated with bench test. Both the results of simulation and hardware-in-the-loop demonstrate that the proposed strategy not only enable to sustain the battery SOC within its operational range and keep the engine operation point locating the peak efficiency region, but also the fuel economy of series-parallel hybrid electric bus（SPHEB） dramatically advanced up to 30.73% via comparing with the prototype bus and a similar improvement for PBIO strategy relative to rule-based strategy, the reduction of fuel consumption is up to 12.38%. The proposed research ensures the algorithm of PBIO is real-time applicability, improves the efficiency of SPHEB system, as well as suite to complicated configuration perfectly.
基金This project is supported by Electric Vehicle Key Project of National 863 Program of China (No.2001AA501200, 2001AA501211).
文摘Energy management strategy (EMS) is the core of the real-time controlalgorithm of the hybrid electric vehicle (HEV). A novel EMS using the logic threshold approach withincorporation of a stand-by optimization algorithm is proposed. The aim of it is to minimize theengine fuel consumption and maintain the battery state of charge (SOC) in its operation range, whilesatisfying the vehicle performance and drivability requirements. The hybrid powertrain bench testis carried out to collect data of the engine, motor and battery pack, which are used in the EMS tocontrol the powertrain. Computer simulation model of the HEV is established in the MATLAB/Simulinkenvironment according to the bench test results. Simulation results are presented for behaviors ofthe engine, motor and battery. The proposed EMS is implemented for a real parallel hybrid carcontrol system and validated by vehicle field tests.
文摘With an increasing number of vehicles with alternative powertrains, the choice of the most appropriate powertrain system for a vehicle class or a load cycle is challenging. This paper introduces a method to design an optimal alternative powertrain based on a longitudinal dynamic simulation. The objective function of the minimization problem describes the characteristic map of the traction system. The goal of the optimization is to minimize fuel consumption respectively energy demand. Different types of propulsion systems are investigated. The results show that the proposed method delivers useful alternative powertrains by applying an optimization with reasonable restrictions.
