Hybrid Procedure for Thoracic Aortic Disease

Form 2008 to 2009, four patients with complex thoracic aortic disease, including aortic aneurysms and dissections, were successfully treated in our department with a new treatment approach:hybrid procedure.Combined open surgery and endovascular repair were performed in these patients without deep hypothermia or circulatory arrest.Compared to those who underwent traditional open surgery in the same period, time of mechanical ventilation and ICU stay was decreased in these four patients.All of them were discharged soon after operation without postoperative complications or death.The result suggests that this new approach could be an option for thoracic aortic disease, but long-term and large-population studies are still required to demonstrate the safety and validity.

Hybrid procedure for pulmonary atresia with intact ventricular septum

Objective In patients with pulmonary atresia and intact ventricular septum (PAIVS) without right ventricular-dependent coronaries,catheter techniques including the use of a sniff wire,lasers,and radiofrequency have been the most widely used as initial therapy. However,percutaneous perforation and balloon valvuloplasty were associated with higher rate of procedural failure and

Hybrid procedures for thoracoabdominal aortic aneurysms and dissections

Background Hybrid procedures including debranching of visceral and renal arteries followed by endovascular exclusion of the thoracoabdominal aortic aneurysm （TAAA） have recently been proposed as a less invasive alternative to conventional TAAA surgery. This study aimed to evaluate the immediate and long-term outcomes of hybrid procedures for TAAA in high-risk patients. Methods Between September 1998 and May 2012, 32 high-risk TAAA patients （five females, median age 61.5 years） underwent hybrid procedures at a single institution. Simultaneous approach and staged approach were performed on the basis of patients＇ conditions. Follow-up computed tomography angiography （CTA） was routinely performed before discharge and at 6, 12 months and annually thereafter. Results Procedural success was achieved in all cases. The median hospital stay was （21.5＋2.3） days, and the median procedure time was （420＋31） minutes. Blood loss averaged （2100_＋261） ml. A total of 124 visceral artery bypasses was performed. Two patients （6.3%） died within 30 days. One patient exhibited complete paraplegia （3.1%）. The visceral graft patency was 96.1% at 3 years. All-cause survival rates were 93.8%, 87.5%, 81.3% and 53.1% at 1, 2, 3 and 5 years, respectively. No patient died due to aortic events. The freedom rates from aortic events were 96.9%, 93.6%, 87.5%, 68.8% at 1,2, 3 and 5 years, respectively. Conclusions The results of visceral hybrid repair for high-risk patients with complex TAAAs are encouraging. However, the procedure is still a significant physiological insult to patients. Until branched and fenestrated endovascular repair become more common, hybrid procedure will continue to have a role in high-risk patients.

Emergency Hybrid Correction in a Newborn with Critical Aortic Valve Stenosis with Acute Pulmonary Edema in the First Hour after Birth

Critical aortic valve stenosis in newborns is the cause of a severe clinical condition with the onset of symptoms during first hours after birth.We present a clinical case of a successful surgical correction of a critical aortic stenosis using a hybrid method applied in a newborn during the first day of life.The infant was diagnosed with a hypoplastic left heart complex with an intact atrial septum(aortic and mitral valves stenosis variant),that led to the cardiogenic shock and acute pulmonary edema.The procedure included bilateral banding of the pulmonary artery branches and atrioseptostomy with stenting of the interatrial septum.The surgery was performed through a median sternotomy.

Application of the quadrilateral area coordinate method:a new element for laminated composite plate bending problems

Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate （QAC） method. Compared with those traditional models using isoparametric coordinates, these new models are less sensitive to mesh distortion. In this paper, a new displacement-based, 4-node 20-DOF （5-DOF per node） quadrilateral bending element based on the first-order shear deformation theory for analysis of arbitrary laminated composite plates is presented. Its bending part is based on the element AC-MQ4, a recent-developed high-performance Mindlin-Reissner plate element formulated by QAC method and the generalized conforming condition method; and its in-plane displacement fields are interpolated by bilinear shape functions in isoparametric coordinates. Furthermore, the hybrid post-rocessing procedure, which was firstly proposed by the authors, is employed again to improve the stress solutions, especially for the transverse shear stresses. The resulting element, denoted as AC-MQ4-LC, exhibits excellent performance in all linear static and dynamic numerical examples. It demonstrates again that the QAC method, the generalized conforming condition method, and the hybrid post-processing procedure are efficient tools for developing simple, effective and reliable finite element models.

Effectiveness of Bilateral Pulmonary Artery Banding in Patients with Hypoplastic Left Heart Syndrome and Congenital Heart Defects with a Functional Single Ventricle: A Single-Center Retrospective Study

Background:Bilateral banding of the branches of the pulmonary artery in patients with hypoplastic left heart syndrome(HLHS)and other duct dependent critical neonatal heart malformations can significantly reduce the incidence of severe complications in the postoperative period,especially in severely unstable patients.In our study we compared different surgical techniques of bilateral pulmonary artery banding(PAB)in respect to their success in balancing systemic and pulmonary blood flow.Methods:We included 44 neonates with a HLHS and congenital heart diseases(CHD)with a functional single ventricle underwent a hybrid operation:bilateral PAB and patent ductus arteriosus stenting.The hybrid surgery for method No.1 is performed as a one-stage procedure,together with patent ductus arteriosus(PDA)stenting.After median sternotomy,two Gore-Tex 1–2 mm wide bands with a diameter of 3–3.5 mm are put.When we apply method No.2 then the thread is used to create bands.Method No.3 is distinguished by intraoperative assessment of blood flow at the site of narrowing of the branches of the pulmonary artery and optional stenting of the PDA.The cuff for banding is made of Gore-Tex tubing.Effectiveness when applying method Nos.1 and 2 is assessed by the change in invasive blood pressure and oxygen saturation after narrowing of the branches of the pulmonary artery.Also,with these techniques PDA stenting by inserting the introducer via pulmonary artery trunk is performed.Results:HLHS with mitral or aortic valve atresia or both was present in 19 patients(43.1%),with severe left heart obstruction resulting in PDA dependent systemic circulation in 16 babies(36.4%).CHD with single ventricle physiology occurred in 9 patients(20.5%).14 babies(31.8%)undergo the procedure following the method No.1,8 patients(18.2%)method No.2 and 22 patients(50%)method No.3.Qp/Qs=1/1 was achieved in 30 patients(30/44,68.1%):as a result of the method No.1 was achieved in 5 patients(5/14,35.7%),method No.2 in 4 patients(4/8,50%),method No.3 in 21 patients(21/22,95.5%).Multivariate regression analysis revealed that method No.3 significantly increases the chances of hemodynamic efficacy operations(OR=35.0;p=0.005;CI(95%)3–411.5).Conclusion:Application of the operation technique No.3 in combination with the intraoperative assessment of blood flow parameters at the site of banding of the branches of the pulmonary artery are the most optimal criteria for achieving Qp/Qs=1/1.If there are signs of restriction at the level of the foramen ovale,atrioseptostomy should be done in the second stage after bilateral pulmonary banding.