Sequential quadratic programming-based non-cooperative target distributed hybrid processing optimization method

The distributed hybrid processing optimization problem of non-cooperative targets is an important research direction for future networked air-defense and anti-missile firepower systems. In this paper, the air-defense anti-missile targets defense problem is abstracted as a nonconvex constrained combinatorial optimization problem with the optimization objective of maximizing the degree of contribution of the processing scheme to non-cooperative targets, and the constraints mainly consider geographical conditions and anti-missile equipment resources. The grid discretization concept is used to partition the defense area into network nodes, and the overall defense strategy scheme is described as a nonlinear programming problem to solve the minimum defense cost within the maximum defense capability of the defense system network. In the solution of the minimum defense cost problem, the processing scheme, equipment coverage capability, constraints and node cost requirements are characterized, then a nonlinear mathematical model of the non-cooperative target distributed hybrid processing optimization problem is established, and a local optimal solution based on the sequential quadratic programming algorithm is constructed, and the optimal firepower processing scheme is given by using the sequential quadratic programming method containing non-convex quadratic equations and inequality constraints. Finally, the effectiveness of the proposed method is verified by simulation examples.

Hybrid Process of Reactive Distillation and Pervaporation for the Production of Tert-amyl Ethyl Ether

In this study, a reactive distillation column in which chemical reaction and separation occur simultaneously is applied for the synthesis of tert-amyl ethyl ether （TAEE） from ethanol （EtOH） and tert-amyl alcohol （TAA）. Pervaporation, an efficient membrane separation technique, is integrated with the reactive distillation for enhancing the efficiency of TAEE production. A user-defined Fortran subroutine of a pervaporation unit is developed, allowing the design and simulation of the hybrid process of reactive distillation and pervaporation in Aspen Plus simulator. The performance of such a hybrid process is analyzed and the results indicate that the integration of the reactive distillation with the pervaporation increases the conversion of TAA and the purity of TAEE product, compared with the conventional reactive distillation.

Machining performance on hybrid process of abrasive jet machining and electrical discharge machining

To develop a hybrid process of abrasive jet machining (AJM) and electrical discharge machining (EDM),the effects of the hybrid process parameters on machining performance were comprehensively investigated to confirm the benefits of this hybrid process.The appropriate abrasives delivered by high speed gas media were incorporated with an EDM in gas system to construct the hybrid process of AJM and EDM,and then the high speed abrasives could impinge on the machined surface to remove the recast layer caused by EDM process to increase the efficiency of material removal and reduce the surface roughness.In this study,the benefits of the hybrid process were determined as the machining performance of hybrid process was compared with that of the EDM in gas system.The main process parameters were varied to explore their effects on material removal rate,surface roughness and surface integrities.The experimental results show that the hybrid process of AJM and EDM can enhance the machining efficiency and improve the surface quality.Consequently,the developed hybrid process can fit the requirements of modern manufacturing applications.

Building Sustainable Score (BSS)—A Hybrid Process Approach for Sustainable Building Assessment in China

Sustainable building in China has gained attention both domestically and abroad. Despite the fast increase in sustainable assessment tools developed locally or adopted from overseas, there are still criticisms about the current situation of weak implementation and lack of comprehensive consideration. The lack of consideration of economic and social aspects or building performance on whole building life cycle all lead to departure from the true meaning of sustainable development. And lack of participation on the part of stakeholders makes it too theoretical to be carried out. This research aims to develop a model to address this problem. This research started with review of current sustainable assessment tools applied in China. As the assessment indicators have clear regional disparities, and almost no current tool considers all three pillars of environmental, economic and social in building life cycle. An industry survey was therefore designed for generation of indicators at different building stages, and personal interviews relevant to different occupation in building industry were conducted to complement the questionnaire survey. After that, the model Building Sustainable Score (BSS) was developed based on the stakeholders’ participation. Finally, the model is verified by a case study.

Hybrid low salinity water and surfactant process for enhancing heavy oil recovery

Combining low salinity water (LSW) with surfactants has an enormous potential for enhancing oil recovery processes. However, there is no consensus about the mechanisms involved, in addition to the fact that several studies have been conducted in model systems, while experiments with rocks and reservoir fluids are scarce. This study presents a core-flooding experiment of LSW injection, with and without surfactant, using the core and heavy oil samples obtained from a sandstone reservoir in southeastern Mexico. The effluents and the crude oil obtained at each stage were analyzed. The study was complemented by tomographic analysis. The results revealed that LSW injection and hybrid process with surfactants obtained an increase of 11.4 percentage points in recovery factor. Various phenomena were caused by LSW flooding, such as changes in wettability and pH, ion exchange, mineral dissolution, detachment of fines and modification of the hydrocarbon profile. In the surfactant flooding, the reduction of interfacial tension and alteration of wettability were the main mechanisms involved. The findings of this work also showed that the conditions believed to be necessary for enhanced oil recovery with LSW, such as the presence of kaolinite or high acid number oil, are not relevant.

Pressure swing adsorption/membrane hybrid processes for hydrogen purification with a high recovery

Hydrogen was recovered and purified from coal gasification-produced syngas using two kinds of hybrid processes： a pressure swing adsorption （PSA）- membrane system （a PSA unit followed by a membrane separation unit） and a membrane-PSA system （a mem- brane separation unit followed by a PSA unit）. The PSA operational parameters were adjusted to control the product purity and the membrane operational parameters were adjusted to control the hydrogen recovery so that both a pure hydrogen product （ 〉 99.9%） and a high recovery （〉 90%） were obtained simultaneously. The hybrid hydrogen purification processes were simulated using HYSYS and the processes were evaluated in terms of hydrogen product purity and hydrogen recovery. For comparison, a PSA process and a membrane separation process were also used individually for hydrogen purifica- tion. Neither process alone produced high purity hydrogen with a high recovery. The PSA-membrane hybrid process produced hydrogen that was 99.98% pure with a recovery of 91.71%, whereas the membrane-PSA hybrid process produced hydrogen that was 99.99% pure with a recovery of 91.71%. The PSA-membrane hybrid process achieved higher total H2 recoveries than the membrane-PSA hybrid process under the same H2 recovery of membrane separation unit. Meanwhile, the membrane-PSA hybrid process achieved a higher total H2 recovery （97.06%） than PSA-membrane hybrid process （94.35%） at the same H2 concentration of PSA feed gas （62.57%）.

Hybrid femtosecond laser three-dimensional micro-and nanoprocessing:a review

The extremely high peak intensity associated with ultrashort pulse width of femtosecond(fs)lasers enabled inducing nonlinear multiphoton absorption in materials that are transparent to the laser wavelength.More importantly,focusing the fs laser beam inside the transparent materials confined the nonlinear interaction to within the focal volume only,realizing three-dimensional(3D)micro/nanofabrication.This 3D capability offers three different processing schemes for use in fabrication:undeformative,subtractive,and additive.Furthermore,a hybrid approach of different schemes can create much more complex 3D structures and thereby promises to enhance the functionality of the structures created.Thus,hybrid fs laser 3D microprocessing opens a new door for material processing.This paper comprehensively reviews different types of hybrid fs laser 3D micro/nanoprocessing for diverse applications including fabrication of functional micro/nanodevices.

Hybrid Micro-forming Processes and Quality Evaluation of Micro-double Gear

Micro-gear is an important actuating component used widely in the micro electro mechanical systems(MEMS) devices.The technologies of micro-forming and precision assembly are urgently developed to manufacture the micro-double gear with central shaft.In the paper,a novel hy-brid-forming process with two kinds of piercing method have been proposed to manufacture the micro-double gear using micro forming technology.The tests of hybrid forming process were carried out with two steps and the micro-double gear was successfully manufactured with good surface quality.The results also show that the hybrid micro-forming process with central piercing method can improve the defects of inclining shaft generated by double-ended piercing method.The quality evaluation of micro-double gear was conducted with surface roughness,micro-hardness and impact tests.The results show that the micro-double gear with good mechanical properties can meet the requirements of application for milli-machines.

High-quality manufacturing method ofcomplicated castings based on multi-materialhybrid moulding process

A multi-material hybrid patternless moulding process for complicated castings has been proposed. Moulding sands used in the hybrid moulding process include silica sand, ceramic sand, chromite sand, zircon sand, and steel shot sand. Experimental method was used to study the effects of moulding sands on the temperature field, mechanical properties, and dimensional precision of the iron castings. Under the condition that the wall thickness on different sides of the casting is the same, when the wall thickness is greater than 10 mm, the heat storage capacity of the moulding sands from strong to weak is steel shot sand, zircon sand, chromite sand, ceramic foundry sand, and silica sand. Tensile strength of the obtained castings from high to low is zircon sand, chromite sand, steel shot sand, ceramic sand, and silica sand. Contraction rate of the obtained castings from high to low is steel shot sand, zircon sand, chromite sand, silica sand, and ceramic sand. Therefore, steel shot sand and zircon sand can be used as chilled sand, and even can be used instead of cold iron when the casting wall thickness is greater than 10 mm. Zircon sand and chromite sand can be used to obtain high mechanical properties, and silica sand and ceramic sand can be selected to obtain high dimensional precision of the castings. Finally, a typical iron casting piece was tested by experiment using the hybrid moulding process. Excellent performances of iron castings confirm the feasibility of the hybrid moulding process.

Discussion on the sweep efficiency of hybrid steam-chemical process in heavy oil reservoirs: An experimental study

Non-condensable gas(NCG),foam and surfactant are the three commonly-used additives in hybrid steam-chemical processes for heavy oil reservoirs.Their application can effectively control the steam injection profile and increase the sweep efficiency.In this paper,the methods of microscale visualized experiment and macroscale 3D experiment are applied to systematically evaluate the areal and vertical sweep efficiencies of different hybrid steam-chemical processes.First,a series of static tests are performed to evaluate the effect of different additives on heavy oil properties.Then,by a series of tests on the microscale visualized model,the areal sweep efficiencies of a baseline steam flooding process and different follow-up hybrid EOR processes are obtained from the collected 2D images.Specifically,they include the hybrid steam-N_(2)process,hybrid steam-N2/foam process,hybrid steam-surfactant process and hybrid steam-N2/foam/surfactant process(N2/foam slug first and steam-surfactant co-injection then).From the results of static tests and visualized micromodels,the pore scale EOR mechanisms and the difference between them can be discussed.For the vertical sweep efficiencies,a macroscale 3D experiment of steam flooding process and a follow-up hybrid EOR process is conducted.Thereafter,combing the macroscale 3D experiment and laboratory-scaled numerical simulation,the vertical and overall sweep efficiencies of different hybrid steam-chemical processes are evaluated.Results indicate that compared with a steam flooding process,the areal sweep efficiency of a hybrid steam-N2process is lower.It is caused by the high mobility ratio in a steam-N2-heavy oil system.By contrast,the enhancement of sweep efficiency by a hybrid steam-N2/foam/surfactant process is the highest.It is because of the high resistance capacity of NCG foam system and the performance of surfactant.Specifically,a surfactant can interact with the oil film in chief zone and reduce the interfacial energy,and thus the oil droplets/films formed during steam injection stage are unlocked.For NCG foam,it can plug the chief steam flow zone and thus the subsequent injected steam is re-directed.Simultaneously,from the collected 2D images,it is also observed that the reservoir microscopic heterogeneity can have an important effect on their sweep efficiencies.From the 3D experiment and laboratory-scaled numerical simulation,it is found that a N2/foam slug can increase the thermal front angle by about 150 and increase the vertical sweep efficiency by about 26%.Among the four processes,a multiple hybrid EOR process(steam-N2/foam/surfactant process) is recommended than the other ones.This paper provides a novel method to systematically evaluate the sweep efficiency of hybrid steam-chemical process and some new insights on the mechanisms of sweep efficiency enhancement are also addressed.It can benefit the expansion of hybrid steam-chemical processes in the post steamed heavy oil reservoirs.

Discrete-Time Hybrid Decision Processes: The Discounted Case

This paper is a sequel to Kageyama et al. [1], in which a Markov-type hybrid process has been constructed and the corresponding discounted total reward has been characterized by the recursive equation. The objective of this paper is to formulate a hybrid decision process and to give the existence and characterization of optimal policies.

Kinetics model of aerobic phase in hybrid anoxic-oxic process

Kinetics models of COD degradation,biomass growth of the anoxic-oxic ( A/O) system as well as NH3-N degradation in aerobic phase were presented according to the mass balance theory,reaction-diffusion theory and Fick law. Then these models were testified by comparson with experimental results. It is demonstrated that the variation trends of theoretical and experimental values for COD degradation and biomass growth are similar. The deviation rate between theoretical and experimental values is always under 20% even it increases along with the fluctuation of influent organic loading. In terms of NH3-N degradation,nitrification can also be well simulated by the model as the substrates of influent are sufficient. It indicates that the model can accurately reflect the reaction in hybrid A/O process. Models presented herein provide a theoretical basis for the design, operation and control of hybrid A/O process.

Hybrid Neural Network Model for RH Vacuum Refining Process Control

A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and the RH operational guide parameters for different steel grades according to the initial conditions of molten steel,and a three-layer BP neural network was adopted to deal with nonlinear factors for improving and compensating the limitations of technological model for RH process control and end-point prediction.It was verified that the hybrid neural network is effective for improving the precision and calculation efficiency of the model.

PERFORMANCE EVALUATION METHOD FOR BUSINESS PROCESS OF MACHINERY MANUFACTURER BASED ON DEA/AHP HYBRID MODEL

A set of indices for performance evaluation for business processes with multiple inputs and multiple outputs is proposed, which are found in machinery manufacturers. Based on the traditional methods of data envelopment analysis （DEA） and analytical hierarchical process （AHP）, a hybrid model called DEA/AHP model is proposed to deal with the evaluation of business process performance. With the proposed method, the DEA is firstly used to develop a pairwise comparison matrix, and then the AHP is applied to evaluate the performance of business process using the pairwise comparison matrix. The significant advantage of this hybrid model is the use of objective data instead of subjective human judgment for performance evaluation. In the case study, a project of business process reengineering （BPR） with a hydraulic machinery manufacturer is used to demonstrate the effectiveness of the DEA/AHP model.

Formalizing the General Plant for Development of Hybrid Process Control Systems

Many process control systems are a kind of hybrid systems. In order to develop a satisfied control strategy, i. e., to make the whole system satisfy some processing requirements, the knowledge of plant is indispensable. This paper proposes a formal model for the general plant for a kind of process control systems. Based on the model, requirements for the system can be specified from goals, and the controller can be designed according to plant based formal approach . An industrial process control system is used to illustrate our models and methods. Duration Calculus, a real time interval logic, is utilized to specify some characters of the model and development of control program for the exemplified system.

Hybrid Post-Processing Procedure for Displacement-Based Plane Elements

In the analysis of high-rise building, traditional displacement-based plane elements are often used to get the in-plane internal forces of the shear walls by stress integration. Limited by the singular problem produced by wall holes and the loss of precision induced by using differential method to derive strains, the displacement-based elements cannot always present accuracy enough for design. In this paper, the hybrid post-processing procedure based on the Hellinger-Reissner variational principle is used for improving the stress precision of two quadrilateral plane elements. In order to find the best stress field, three different forms are assumed for the displacement-based plane elements and with drilling DOF. Numerical results show that by using the proposed method, the accuracy of stress solutions of these two displacement-based plane elements can be improved.

Effect of Refrigerant on the Performance of a C3/MRC Liquefaction Process

The Mixed Refrigerant(MR)component is an important factor influencing the performances of natural gas lique-faction processes.However,there is a lack of systematic research about the utilization of propane pre-cooled(C3/MRC).In this paper,this mixed refrigerant cycle liquefaction process is simulated using the HYSYS software and the main influential parameters involved in the process are varied to analyze their influence on the liquefaction rate and power consumption.The results show that an effective way for lowering the power consumption of the compressor consists of reducing the flow through the compressor through optimization of the percentage of mixed refrigerant.The power consumption of the compressor in the hybrid refrigeration process is affected by both flow and pressure ratios.Its specific power consumption can be reduced by increasing the flow and decreasing the pressure ratio at the same time.The increase in refrigerant pressure at the high-pressure end can significantly mitigate the energy loss of the heat exchanger and compressor.

STUDY ON PREPARATION OF ORGANIC/INORGANIC HYBRID BIOMATERIALS THROUGH SOL-GEL PROCESS

-A Sol-gel process has been utilized to produce hybrid materials by in-corporating polymeric components of PDMS and PHEMA with tetraethoxysilane (TEOS) respectively.Systematic experiments were carried out to study the erfects of catalyst, H2O, and TEOS content on the structure-property behavior of TEOS-PDME materials. Results from dynamic mechanical and SEM studies indicated good dispersion of the PDMS component within the three dimensional network and no signs of phase ceparation. As to TEOS-KH570-HEMA system, all the samples made were ransparent and flexible. The water content was about 30%, stress at break varie from 0.4 to 1.1 MPa with dirferent HEMA content. Animal tests showed no rcaction to living body and the materials made by this way displayed good biocompatibility.

Process analysis of direct laser melting to fabricate layered hybrid beads

The successful fabrication of layered hybrid beads by DLM process is limited by dissimilar melting ranges of different powders.For the application of DLM process into manufacturing industries,target mechanical properties of final product must be achieved.Process analysis was performed for the DLM fabrication of layered hybrid beads by using stainless steel (SS 316L) and titanium powders.For the analysis of fabrication characteristics,single hybrid bead was formed using SS316L powder onto the base plate and then Ti powder was melted onto the previous melted layer.In addition,multi-layer hybrid beads were fabricated for the analysis of the layering effects between them.From these studies,the effects of the processing parameters,such as laser power,scan rate and scan line spacing on surface morphology were characterized and optimum processing conditions for the DLM fabrication of layered hybrid beads were developed.

考虑混合工艺的自动化码头多设备资源协同调度优化模型和算法设计

Considering the uncertainty of the speed of horizontal transportation equipment,a cooperative scheduling model of multiple equipment resources in the automated container terminal was constructed to minimize the completion time,thus improving the loading and unloading efficiencies of automated container terminals.The proposed model integrated the two loading and unloading processes of“double-trolley quay crane+AGV+ARMG”and“single-trolley quay crane+container truck+ARMG”and then designed the simulated annealing particle swarm algorithm to solve the model.By comparing the results of the particle swarm algorithm and genetic algorithm,the algorithm designed in this paper could effectively improve the global and local space search capability of finding the optimal solution.Furthermore,the results showed that the proposed method of collaborative scheduling of multiple equipment resources in automated terminals considering hybrid processes effectively improved the loading and unloading efficiencies of automated container terminals.The findings of this study provide a reference for the improvement of loading and unloading processes as well as coordinated scheduling in automated terminals.