Research of Hybrid Modulation Radar Signal

Based on the advantage of phase coded signal and stepped frequency signal,a new hybrid modulation signal is introduced in this paper. It combines phase code modulation during the pulse with stepped frequency modulation between the pulses, which is named as phase-coded stepped-frequency ( PCSF ) signal. By analyzing its waveform and ambiguity function,the comparison between Stepped-Frequency ( SF) signal and PCSF signal is given,which shows that the PCSF signal is better than SF signal. Finally,the signal processing method with two stage compressed processing is presented. The simulation results show that this new hybrid modulation radar signal can get a higher stepped frequency than ordinary SF signal,realize the same equivalent bandwidth with less pulse number,and solve the conflict among the stepped frequency,the number of pulse, and transmit average power. Under the premises of a certain range resolution,this new hybrid modulation radar signal not only raises the data rate of radar system,but also reduces Doppler sensitivity with a good prospect, and the effect of one-dimensional range profile is much better than that of traditional SF signal. Therefore,this new hybrid modulation radar signal can be widely used in application.

Separation identification of a neural fuzzy Wiener–Hammerstein system using hybrid signals

A novel separation identification strategy for the neural fuzzy Wiener–Hammerstein system using hybrid signals is developed in this study.The Wiener–Hammerstein system is described by a model consisting of two linear dynamic elements with a nonlinear static element in between.The static nonlinear element is modeled by a neural fuzzy network(NFN)and the two linear dynamic elements are modeled by an autoregressive exogenous(ARX)model and an autoregressive(AR)model,separately.When the system input is Gaussian signals,the correlation technique is used to decouple the identification of the two linear dynamic elements from the nonlinear element.First,based on the input and output of Gaussian signals,the correlation analysis technique is used to identify the input linear element and output linear element,which addresses the problem that the intermediate variable information cannot be measured in the identified Wiener–Hammerstein system.Then,a zero-pole match method is adopted to separate the parameters of the two linear elements.Furthermore,the recursive least-squares technique is used to identify the nonlinear element based on the input and output of random signals,which avoids the impact of output noise.The feasibility of the presented identification technique is demonstrated by an illustrative simulation example and a practical nonlinear process.Simulation results show that the proposed strategy can obtain higher identification precision than existing identification algorithms.

Estimation of Hammerstein nonlinear systems with noises using filtering and recursive approaches for industrial control

This paper discusses a strategy for estimating Hammerstein nonlinear systems in the presence of measurement noises for industrial control by applying filtering and recursive approaches.The proposed Hammerstein nonlinear systems are made up of a neural fuzzy network(NFN)and a linear state`-space model.The estimation of parameters for Hammerstein systems can be achieved by employing hybrid signals,which consist of step signals and random signals.First,based on the characteristic that step signals do not excite static nonlinear systems,that is,the intermediate variable of the Hammerstein system is a step signal with different amplitudes from the input,the unknown intermediate variables can be replaced by inputs,solving the problem of unmeasurable intermediate variable information.In the presence of step signals,the parameters of the state-space model are estimated using the recursive extended least squares(RELS)algorithm.Moreover,to effectively deal with the interference of measurement noises,a data filtering technique is introduced,and the filtering-based RELS is formulated for estimating the NFN by employing random signals.Finally,according to the structure of the Hammerstein system,the control system is designed by eliminating the nonlinear block so that the generated system is approximately equivalent to a linear system,and it can then be easily controlled by applying a linear controller.The effectiveness and feasibility of the developed identification and control strategy are demonstrated using two industrial simulation cases.