Variants of Secondary Control with Power Recovery for Loading Hydraulic Driving Device

Current high power load simulators are generally incapable of obtaining both high loading performance and high energy efficiency. Simulators with high energy efficiency are used to simulate static-state load, and those with high dynamic performance typically have low energy efficiency. In this paper, the variants of secondary control（VSC） with power recovery are developed to solve this problem for loading hydraulic driving devices that operate under variable pressure, unlike classical secondary control（CSC） that operates in constant pressure network. Hydrostatic secondary control units are used as the loading components, by which the absorbed mechanical power from the tested device is converted into hydraulic power and then fed back into the tested system through 4 types of feedback passages（FPs）. The loading subsystem can operate in constant pressure network, controlled variable pressure network, or the same variable pressure network as that of the tested device by using different FPs. The 4 types of systems are defined, and their key techniques are analyzed, including work principle, simulating the work state of original tested device, static operation points, loading performance, energy efficiency, and control strategy, etc. The important technical merits of the 4 schemes are compared, and 3 of the schemes are selected, designed, simulated using AMESim and evaluated. The researching results show that the investigated systems can simulate the given loads effectively, realize the work conditions of the tested device, and furthermore attain a high power recovery efficiency that ranges from 0.54 to 0.85, even though the 3 schemes have different loading performances and energy efficiencies. This paper proposes several loading schemes that can achieve both high dynamic performance and high power recovery efficiency.

WEAKLY SWIRLING TURBULENT FLOW IN TURBID WATER HYDRAULIC SEPARATION DEVICE

This article deals with the characteristics of weakly swirling turbulent flow field in a Turbid Water Hydraulic Separation Device （TWHSD） through experimental and numerical researches. The flow field was measured by PIV, which provided streamlines, vortex structure, vorticity and velocity distribution in different test planes in the TWHSD. On the basis of the experimental results, the tangential and radial velocity distributions of the swirling flow field were obtained. Meanwhile, the numerical simulations were conducted with the RNG κ-ε and RSM turbulence models, respectively. According to the experimental and numerical results, the characteristics of the clear water flow field inside the TWHSD were determined. In view of simulation accuracy and time consumption, it is suggested to apply the RNG κ-ε model instead of the RSM model, which is more time consuming, to make further study on two-phases flow fields in the device.