Sliding Mode Control of Hydraulic Pressure in Electro-Hydraulic Brake System Based on the Linearization of Higher-Order Model

The possibility to enhance the stability and robustness of electrohydraulic brake(EHB)systems is considered a subject of great importance in the automotive field.In such a context,the present study focuses on an actuator with a four-way sliding valve and a hydraulic cylinder.A 4-order nonlinear mathematical model is introduced accordingly.Through the linearization of the feedback law of the high order EHB model,a sliding mode control method is proposed for the hydraulic pressure.The hydraulic pressure tracking controls are simulated and analyzed by MATLAB/Simulink soft considering separately different conditions,i.e.,a sine wave,a square wave and a square wave with superimposed sine disturbance.The results show that the proposed strategy can track the target within 0.25 s,and the mean observed error is less than 1.2 bar.Moreover,with such a strategy,faster response and less overshoot are possible,which should be regarded as significant advantages.

Pressure-tracking control of a novel electro-hydraulic braking system considering friction compensation

This work presents an integrated pressure-tracking controller for a novel electro-hydraulic brake(EHB) system considering friction and hydraulic disturbances. To this end, a mathematical model of an EHB system, consisting of actuator and hydraulic sub-systems, is derived for describing the fundamental dynamics of the system and designing the controller. Due to sensor inaccuracy and measurement noise, a Kalman filter is constructed to estimate push rod stroke for generating desired master cylinder pressure. To improve pressure-tracking accuracy, a linear friction model is generated by linearizing the nonlinear Tustin friction model, and the unmodeled friction disturbances are assumed unknown but bounded. A sliding mode controller is designed for compensating friction disturbances, and the stability of the controller is investigated using the Lyapunov method. The performance of the proposed integrated controller is evaluated with a hardware-in-the-loop(HIL) test platform equipped with the EHB prototype. The test results demonstrate that the EHB system with the proposed integrated controller not only achieves good pressure-tracking performance, but also maintains robustness to friction disturbances.

WORKING LIQUID PRESSURE AND ITS CONTROL IN HYDRAULIC DRAWING PROCESSES OF CUPS

A method of setting up a pressure-stroke characteristic of the working liquid in hydraulic drawing is studied. A pressure-stroke characteristic and software for controlling its forming process are also developed. And a set of pressure controlling devices with PLC as a central processor are designed. It can be got from the relevant experiments that the pressure-stroke characteristic is correct and its control for forming process is available.

Application of Single Neuron Adaptive PID Regulators with Auto-tuning Gain in Industrial Parameter(Pressure)Closed-loop Process Control Systems

A type of single neuron adaptive PID regulator with auto-tuning gain is proposed and applied to the work control of fans, waterpumps and air-pressers etc. in Handan Iron & Steel Compel China. The robusthess of induStrial parameter closed-loop process controlsystems is improved, and the work quality of the systems bettered.

Water-Assisted Injection Molding System Based on Water Hydraulic Proportional Control Technique

Water-assisted injection molding（WAIM）, an innovative process to mold plastic parts with hollow sections, is characterized with intermittent, periodic process and large pressure and flow rate variation. Energy savings and injection pressure control can not be .attained based on conventional valve control system. Moreover, the injection water can not be supplied directly by water hydraulic proportional control system. Poor efficiency and control performance are presented by current trial systems, which pressurize injection water by compressed air. In this paper, a novel water hydraulic system is developed applying an accumulator for energy saving. And a new differential pressure control method is proposed by using pressure cylinder and water hydraulic proportional pressure relief valve for back pressure control. Aiming at design of linear controller for injection water pressure regulation, a linear load model is approximately built through computational fluid dynamics（CFD） simulation on two-phase flow cavity filling process with variable temperature and viscosity, and a linear model of pressure control system is built with the load model and linearization of water hydraulic components. According to the simulation, model based feedback is brought forward to compensate the pressure decrease during accumulator discharge and eliminate the derivative element of the system. Meanwhile, the steady-state error can be reduced and the capacity of resisting disturbance can be enhanced, by closed-loop control of load pressure with integral compensation. Through the developed experimental system in the State Key Lab of Fluid Power Transmission and Control, Zhejiang University, China, the static characteristic of the water hydraulic proportional relief valve was tested and output pressure control of the system in Acrylonitrile Butadiene Styrene（ABS） parts molding experiments was also studied. The experiment results show that the dead band and hysteresis of the water hydraulic proportional pressure relief valve are large, but the control precision and linearity can be improved with feed-forward compensation. With the experimental results of injection water pressure control, the applicability of this WAIM system and the effect of its linear controller are verified. The novel proposed process of WAIM pressure control and study on characteristics of control system contribute to the application of water hydraulic proportional control and WAIM technology.

Pressure control strategy for pump motor energy transfer unit

Multi-level pressure source system is a novel hydraulic system with distinct advantage of energy saving. In order to balance each pressure level of the multi-level pressure source system, a pump motor energy transfer unit is usually equipped. However, the pump motor energy transfer has the characteristics of poor starting and low response, which cause long time of pressure adjustment and large pressure jitter when the transformer is switched to system suddenly and the motor-side pressure has pressure impact when rail of the pump-side is switched. To address these problems, this paper proposes a compound control strategy of feedforward compensation control with Fuzzy-PID to improve the controllability of the multi-level pressure source system. A test rig of the pump motor energy transfer unit is built and the controllability of compound controller and PID controller are compared. The experiment results show that, compared with the traditional PID, the adjustment time and the pressure impact are reduced by 20% and 25% with the proposed compound control strategy. Therefore, the presented compound control strategy can be used to improve starting performance and robustness of the pump motor energy transfer unit control system.

Control performance and energy saving of multi-level pressure switching control system based on independent metering control

Aiming at the problem of large energy consumption in hydraulic control system with large load and variable working conditions,based on the multi-level pressure switching control system(MPSCS),a multi-level pressure switching control system based on independent metering control is proposed combined with the independent metering control technology.The configuration principle of the system is given,the mathematical model of this system is established,and the control strategy of the system under 4 different working quadrants is put forward.Finally,the control performance and energy saving characteristics of the system are tested.The test results show that the switching of high and low pressure power supply has a certain effect on the response of step position and ramp position under impedance working condition.The displacement curves show slow climbing or abrupt change of ramp position,and the position accuracy is less than 1 mm.The multi-level pressure switching control system based on independent metering control can recover and store energy under the transcendence working conditions.The control accuracy is about 1 mm,and the energy recovery rate is about 70%~80%.

Research on hydraulic slotting technology controlling coal-gas outbursts

Measured to control serious coal-gas outburst in coal seam were analyzed by theory and experimented in test site.A new technique to distress the coal-bed and drain methane,called hydraulic slotting,was described in detail,and the mechanism of hydrau- lic slotting was put forward and analyzed.The characteristic parameter of hydraulic slotting was given in Jiaozuo mining area and the characteristic of validity,adaptability and secu- rity was evaluated.The results show that the stress surrounding the strata and the gas in coal seam is released efficiently and thoroughly while new techniques are taken,as slot- ting at heading face by high pressure large diameter jet.The resistance to coal and gas outbursts is increased dramatically once the area of slotting is increased to a certain size. In the process of driving 2 000 m tunnel by hydraulic slotting excavation,coal and gas outburst never occurre.The technique could be used to prevent and control potential coal-gas outburst in the proceeding of tunnel driving,and the speed tunneling could be as high as more than 2 times.

Adaptive fuzzy integral sliding mode pressure control for cutter feeding system of trench cutter

A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.

Optimal Valve Closure Operations for Pressure Suppression in Fluid Transport Pipelines

When a valve is suddenly closed in fluid transport pipelines,a pressure surge or shock is created along the pipeline due to the momentum change.This phenomenon,called hydraulic shock,can cause major damage to the pipelines.In this paper,we introduce a hyperbolic partial differential equation(PDE)system to describe the fluid flow in the pipeline and propose an optimal boundary control problem for pressure suppression during the valve closure.The boundary control in this system is related to the valve actuation located at the pipeline terminus through a valve closing model.To solve this optimal boundary control problem,we use the method of lines and orthogonal collocation to obtain a spatial-temporal discretization model based on the original pipeline transmission PDE system.Then,the optimal boundary control problem is reduced to a nonlinear programming(NLP)problem that can be solved using nonlinear optimization techniques such as sequential quadratic programming(SQP).Finally,we conclude the paper with simulation results demonstrating that the full parameterization(FP)method eliminates pressure shock effectively and costs less computation time compared with the control vector parameterization(CVP)method.

底板动压巷道压裂弱结构体应力转移控制技术

为了满足煤矿安全生产的需要,许多巷道都会布置在煤层底板中,如部分运输大巷、排水巷道、瓦斯抽采巷道等。采动应力容易造成底板巷道围岩应力升高,加剧底板巷道围岩变形,造成支护永久失效、顶板下沉、巷道底鼓、两帮收敛等破坏。针对此,提出了在应力传递路径上实施水力压裂,在指定的区域制造出一定空间形态的水压裂缝网,形成压裂弱结构体,实现区域范围内的应力转移,从而降低巷道区域范围内的应力,控制巷道的围岩稳定性的控制技术,并通过理论分析及现场工程验证等方式,揭示了底板动压巷道压裂弱结构体应力转移的力学机制,建立了相应的力学模型,对压裂弱结构体的合理位置、范围等影响因素进行了求解。得出:(1)压裂弱结构体使局部应力场发生明显变化,出现应力升高区和应力降低区,应力降低区主要分布在弱结构体与采动应力连线的方向上,主要集中在一个拱形的范围内;由于膨胀效应,在与应力来源垂直的方向上产生应力集中,出现应力升高区。(2)最大主应力变化幅度与压裂弱结构体的长轴长L、短轴长H、到巷道的距离P、与巷道连线的水平夹角β、压裂层的强度C及内摩擦角α、压裂的损伤变量D等有关。其中到巷道的距离P对卸压效果影响最大,损伤变量D对卸压效果影响最小。(3)采用提出的计算方法设计了淮北矿业集团袁店一矿的103运输集中巷的卸压方案,工程应用结果表明,底板动压巷道变形速率明显减缓,验证了底板强动压巷道压裂弱结构体应力转移模型的合理性。

基于曲率控制前缘的离心泵压力脉动及水力性能分析

蜗壳式离心泵作为流体输送的核心设备,压力脉动及水利性能对泵的稳定性、噪声、寿命等有重大影响。结合曲率控制前缘的设计方法,按增长率1.19%、0.47%、0.32%设计,建立前缘轴长比为0.96、2.11、3.11、4.11的蜗壳式离心泵,以SSTκ-ω模型定常计算结果为初始条件,进行κ-εRNG模型非定常分析,通过频域图分析蜗壳式离心泵压力脉动,并通过矢量云图分析水力性能。结果表明:设计的模型最佳流量为35 m 3/h,设计效率与模拟效率误差仅为2%;前缘轴长比不同,流道内压力扩散有差异;前缘轴长比为3.11时出口压力脉动偏低,低频区更易产生压力脉动;前缘轴长比为0.96时,压力脉动范围偏小,适用于一定流量范围内扬程变化较大的工况。

基于PLC的冷床控制系统技术改造

利用厂区区域改造时期,对设备老旧的冷床控制系统进行了全面升级改造,将原来的交流调试系统改为全数字直流调速系统。本系统采用S7-300CPU315-2DP控制器和ET200系列I/O模式,通过PROFIBUS总线实现了分布式控制。自设备投入运行以来,生产效率明显提升,达到了预期效果。

履带式果园喷药机遥控作业系统设计

为解决传统喷药机依靠人工驾驶,易引起工作人员中毒的问题,针对履带式果园喷药机,设计了一种喷药机遥控作业系统。遥控系统采用ECU作为控制核心,采用飞控系统替代传统的遥控系统进行无线远距离通信,采用液压阀组控制液压油缸来驱动操纵杆动作,从而实现对喷药机的启停、转向和喷药等远距离操纵。在履带式果园喷药机上集成该系统,对系统进行了性能测试,结果表明:系统的有效遥控距离不小于200m,在遥控距离不超过200m的条件下,行走控制响应时间不大于0.6s,遥控距离对系统响应时间几乎没有影响。通过人为切断无线信号的方法,进行了模拟掉线试验,结果表明:喷药机在遥控系统掉线后的停车成功率达到100%。系统具有响应快、通信稳定和安全性高的特点,能够满足果园喷药作业要求。

集成式电子液压线控制动系统建模与仿真

为了解决线控制动系统模型复杂、仿真困难等问题,文章针对一款常见的集成式电子液压线控制动(integrated electronic hydraulic brake,I-EHB)系统,推导其数学模型并进行仿真分析;在MATLAB/Simulink中搭建线控制动系统的仿真模型,设计比例积分微分(proportion integration differentiation,PID)制动控制器,实现对集成式电子液压线控制动系统的压力控制。仿真结果表明:该线控制动系统在PID控制器作用下实际输出压力值能够较好地跟随理想压力值,可以提供较好的制动效果。该文的研究对于线控底盘的开发具有积极推动作用。

不同结构参数对高速开关阀液压力的影响研究

因其具有价格低廉、抗污染性强等优点,高速开关阀已被广泛运用到各种车辆的制动系统中,其动态性能直接影响到车辆的制动效果,而阀芯所受的液压力是决定高速开关阀动态特性优劣的关键参数。针对不同参数对高速开关阀液压力的影响,以及实际工程中阀芯液压力难以测量的问题,采用计算流体动力学(CFD)对高速开关阀进行了数值模拟。首先,基于有限体积法(FVM),建立了不同开度、压差、温度、以及结构参数(阀座节流孔直径和锥角)的三维仿真模型;然后,对比不同网格数量的仿真结果,排除了网格数量对于仿真结果的影响,并详细分析了各参数对液压力的影响,得出了高速开关阀液压力与各参数之间的变化规律;最后,采用响应面分析结合遗传算法对开关阀的结构参数进行了优化。研究结果表明:随着阀芯开度的增加,节流区域发生了转变;较大的压差会导致液压力产生较大幅度的变化;相较于高温,低温对液压力有着更加显著的影响;对结构参数进行优化后,最小开度的液压力提高了49.2%,提高了阀控制稳定性,为高速开关阀线性控制设计提供了理论基础。

坚硬顶板切顶卸压技术对巷道围岩变形规律影响

针对特厚煤层坚硬顶板、宽煤柱条件下临空巷道面临的高围岩应力、大变形等问题,以老石旦煤矿16403综放工作面为工程研究背景,从宽煤柱顶板侧向破断结构角度对临空巷道大变形的影响因素进行了理论分析,采用数值模拟方法研究了对16402运输巷实施不同切顶卸压方案时,临近采空区的16403回风巷侧向顶板采动应力传递规律,并在现场施工水力压裂钻孔进行切顶卸压,实现临空巷道围岩变形控制。研究结果表明:“低位坚硬岩层悬臂梁+高位坚硬岩层砌体梁”破断结构是特厚煤层宽煤柱临空巷道大变形的主要原因,可采用切顶卸压技术破坏宽煤柱顶板侧向破断结构来控制临空巷道围岩大变形;切顶角变化可使关键块B长度发生改变,切顶角越大,则关键块B长度越小,临空侧顶板载荷向煤柱传递的程度越弱,临空巷道围岩承受的采动应力越小,切顶角为100°时临空巷道围岩垂直应力与变形量最小;在16402运输巷以切顶角100°施工水力压裂钻孔后,16403回风巷顶底板变形量较未实施切顶卸压的16402回风巷减小86.5%,两帮变形量减小87.1%,临空巷道围岩稳定性得到极大提高。

河道内源治理与水力冲挖综合技术的研究与应用

为研究河道内源污染治理方式,对河道防洪标准和水质产出目标进行分析,确定污染河道清淤范围和施工方法。分析了潮水水位和河道行洪能力,圈定了清淤范围和纵向清淤深度。分析内源污染污染物负荷和底泥物化性质,确定河道清淤厚度及泥浆处理要求。为实现河道环保清淤施工,采用水力冲挖排干清淤施工方法,实现目标污染物的有效去除,降低了河道清淤方量。通过控制多级泵送系统传输压力,实现了长距离、高陡坡泥浆传输。

基于自适应模糊PID控制下拖拉机液压系统的优化

为了实现拖拉机电子液压系统在田间的压力控制,建立了拖拉机液压控制系统数学模型,并结合压力控制算法设计了拖拉机自适应模糊PID控制系统,以实现拖拉机的压力控制。以传统PID算法、带补偿修正的传统PID算法和补偿修正的自适应模糊PID算法进行试验,验证不同控制器对拖拉机的压力控制效果。研究结果表明:当输入为1.5MPa的阶跃信号,传统PID控制器的响应时间为2.5s,波动范围为0.5MPa;带补偿校正的自适应模糊PID的响应时间为1.5s,波动范围为0.3MPa,响应时间降低了40%,压力波动范围也减少了40%。因此,提出的补偿修正的自适应模糊PID算法下拖拉机液压系统具有更好的动态控制性能。

煤矿井下水力压裂自动控制系统设计

分析指出目前煤矿井下水力压裂技术面临压裂泵输出压力和流量无法快速精确调节、远程安全监控效果及自动化水平有待提高等难题。设计了一种煤矿井下水力压裂自动控制系统。根据煤矿井下水力压裂工艺及系统构成,明确了控制系统关键技术为高压大流量压裂泵输出流量和压力的快速精确调节,远程高可靠性安全、高速实时监控,一键启停及图形化分析等。以KXH12本安型控制器为核心,搭配变频器、组合开关、监控主机、电动开度球阀等设备,以及光纤加CAN总线的双线冗余通信方案,研发了控制系统硬件,并编制了压裂泵控制器、水箱控制器及中央控制器软件,实现了压裂系统快速变流量注水、稳定保压及远程高速实时监控和报警等功能。在煤矿现场对水力压裂自动控制系统进行工业性试验,结果表明该系统压力控制精度为0.1 MPa,流量控制精度为0.1 m3/h,在连续完成14次压裂过程中,每次煤岩层开裂后均能实现较好的保压效果,且操作简单,安全性高,满足煤矿井下水力压裂工艺要求。