Characteristics on Hydro-mechanical Transmission in Power Shift Process

To improve the vehicular power and acceleration performance and reduce the shift impact, the study of the characteristics on power shift is necessary. Based on the flexible hydraulic unit of hydro-mechanical transmission, this paper explores the feasibility of shift without power interruption. With the four models concerning displacement ratio, rotational speed, rotational torque and power at ideal shift point, the characteristics on power shift in different running conditions are analyzed, and the rules of power shift are revealed. The theoretical analysis and test results show that the hydro-mechanical transmission can shift without power interruption in different running conditions. Furthermore, there exists an ideal shift point in theory, at which point the cycle power in hydro-mechanical transmission can＇t be generated, and the impact on the system can be reduced to the minimum. However, if before or after this ideal shift point, a cycle power can be generated.

Research and Design of Hydro-mechanical Continuously Variable Transmission for Tractors

A new type continuous variable transmission device, a hydro-mechanical continuously variable transmission （HMCVT） for agricultural tractors is developed, which is composed of a single planetary gear differential train, a hydraulic transmission system consisted of variable displacement pump and fixed displacement motor and a multi-gear fixed step radio transmission. Based on the analysis of types of hydrostatic mechanical transmission （HMT） and styles of hydraulic transmission, the general drive scheme for HMCVT is obtained. The method of selecting mechanical parameters and hydraulic units is explained, and the stepless speed regulation characteristic of HMCVT is analyzed. This paper also specializes the calculating method of transmission efficiency. It shows that tractors assembled with HMCVT can obtain a continuously variable speed and achieve high drive efficiency.

Characterization of local chemical ordering and deformation behavior in high entropy alloys by transmission electron microscopy

Short-range ordering(SRO)is one of the most important structural features of high entropy alloys(HEAs).However,the chemical and structural analyses of SROs are very difficult due to their small size,complexed compositions,and varied locations.Transmission electron microscopy(TEM)as well as its aberration correction techniques are powerful for characterizing SROs in these compositionally complex alloys.In this short communication,we summarized recent progresses regarding characterization of SROs using TEM in the field of HEAs.By using advanced TEM techniques,not only the existence of SROs was confirmed,but also the effect of SROs on the deformation mechanism was clarified.Moreover,the perspective related to application of TEM techniques in HEAs are also discussed.

Application Study of Fractal Theory in Mechanical Transmission

Mechanical transmissions are applied widely in various electrical and mechanical products, but some qualities of some high-end products can＇t meet people＇s demand, and need to be improved with some new methods or theories. The fractal theory is a new mathematic tool, which provides a new approach for the further study in the area of the mechanical transmission, and helps to solve some problems. The basic contents of the fractal theory are introduced firstly, especially the two important concepts, the self-similar fractal and the fractal dimension. Then, the deferent application of the fractal theory in this area are given to display how to further the study and improve some important characteristics of the mechanical transmission, such as contact surfaces, manufacturing precise, friction and wear, stiffness, strength, dynamics, fault diagnosis, etc. Finally, the problems of the fractal theory and its application are discussed, and some weaknesses, such as the calculation capacity of the fractal theory is not strong, are pointed out. Some new solutions are suggested, such as combining the fractal theory with the fuzzy theory, the chaos theory and so on. The new application fields of the fractal theory in the area of the mechanical transmission are proposed.

Adaptive Clutch Engaging Process Control for Automatic Mechanical Transmission

Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.

In situ investigation of the mechanical properties of nanomaterials by transmission electron microscopy

With the progress of modern transmission elec- tron microscopy （TEM） and development of dedicated func- tional TEM specimen holders, people can now manipulate a nano-object with nanometer-range precision and simulta- neously acquire mechanical data together with atomic-scale structural information. This advanced methodology is play- ing an increasingly important role in nanomechanics. The present review summarizes relevant studies on the in situ in- vestigation of mechanical properties of various nanomateri- als over the past decades. These works enrich our knowledge not only on nanomaterials （such as carbon nanotubes, car- bon onions, boron nitride nanotubes, silicon nanowires and graphene, etc.） but also on mechanics at the nanoscate.

Strategy to control crawling vehicles with automated mechanical transmission

In order to move vehicles with automated mechanical transmission （AMT） a little bit of distance, such as reversing into or moving in a garage, a control strategy for crawling vehicles was proposed. Based on the dynamic analysis of vehicle starting process and requirements of crawl driv- ing for the vehicle, a control strategy of the clutch was designed. The strategy increased the.slipping friction torque first and then decreased it, in order to realize the crawl driving. The speed increased by the engagement of the clutch, and then the clutch turned to disengage to the half disengage point, when the speed met the requirements. Based on the control strategy, a control software was de- signed. In the end, the software was tested on a vehicle with AMT. The lowest steady vehicle speed was reduced to 40% of the original value, which was set in the control strategy.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Optimization Design of Double-parameter Shift Schedule of Tracked Vehicle with Hydrodynamic-mechanical Transmission

A kind of automatic shift schedule optimization method is provided for a tracked vehicle with hydrodynamic-mechanical transmission in order to improve its dynamic performance. A dynamic model of integrated hydrodynamic-mechanical transmission is built in MATLAB/Simdriveline environment, and an optimum shift schedule is derived by using iSight software to call the dynamic model above, then the shift schedule is achieved after optimization. The simulation results show that the method is significant to improve the dynamic performance and gear-shifting smoothness theoretically and practically.

Defect Analysis and Innovation Design of Synchronizer for Clutchless Automatic Mechanical Transmission

The synchronizer is a key component of automatic mechanical transmission(AMT)equipped in electric vehicles,but the inertial lock-ring synchronizer(ILRS)commonly used there is not suitable especially for pure electric vehicles without a clutch because of big shift impact.To make the shifting process rapid and smooth,a new synchronizer named pressure-controllable friction ring synchronizer(PCFRS)was designed.Initially,the inevitable shortcoming of ILRS was verified by simulation and test.Furthermore,the mechanical characteristics and advantages of the new synchronizer over ILRS were analyzed.Then,the formulations describing the dynamic transmission based on the working mechanism of the PCFRS were established.Finally,the shifting simulation results with PCFRS and ILRS based on the same operating conditions were compared and analyzed.The research shows that the PCFRS can meet the main shifting evaluation index of an AMT without complex control methods,as well as it takes only 0.2406 s to finish the comfortable and zero-speed-difference shifting.The shifting quality of PCFRS is better than that of the ILRS.It lays a foundation for using the new synchronizer as a part of clutchless AMTs equipped in pure electric vehicles.

Grey Problems of a Mechanical Transmission System in a Reliability Study

In the light of the Grey characters of reliability on a mechanical transmission system, Grey problems that could assist in the study on mechanical transmission system were analyzed. For example, the factors of time function，the factors of environment and the factors of people have some relationships with the system in this paper. And then, the methods and procedures, which were based upon the theory of Grey system, were elaborated.

Analysis Method and Principle of Dual-mode Electro-mechanical Variable Transmission Program

Automotive industry,as an important pillar of the national economy,has been rapidly developing in recent years.But proplems such as energy comsumption and environmental pollution are posed at the same time.Electro-mechanical variable transmission system is considered one of avilable workarounds.It is brought forward a kind of design methods of dual-mode electro-mechanical variable transmission system rotational speed characteristics and dual-mode drive diagrams.With the motor operating behavior of running in four quadrants and the speed characteristics of the simple internal and external meshing single planetary gear train,four kinds of dual-mode electro-mechanical transmission system scheme are designed.And the velocity,torque and power characteristics of one of the programs are analyzed.The magnitude of the electric split-flow power is an important factor which influences the system performance,so in the parameters matching design,it needs to reduce the power needs under the first mode of the motor.The motor,output rotational speed range and the position of the mode switching point have relationships with the characteristics design of the planetary gear set.The analysis method is to provide a reference for hybrid vehicles＇ design.As the involved rotational speed and torque relationships are the natural contact of every part of transmission system,a theory basis of system program and performance analysis is provided.

Mechanical response of transmission lines based on sliding cable element

In order to study the sliding characteristics when the cable is connected with the other rods in the transmission line structures,a linear sliding cable element based on updated Lagrangian formulation and a sliding catenary element considering the out-of-plane stiffness coefficient are put forward.A two-span and a three-span cable structures are taken as examples to verify the sliding cable elements.By comparing the tensions of the two proposed cable elements with the existing research results,the error is less than 1%,which proves the correctness of the proposed elements.The sliding characteristics should be considered in the practical engineering because of the significant difference between the tensions of sliding cable elements and those of cable element without considering sliding.The out-of-plane stiffness coefficient and friction characteristics do not obviously affect the cable tensions.

Optimal gear shift control strategy for positive independent mechanical split path transmission with automatic shift system

An improvement strategy which controls the shift effort and the power summing planetary gear set of steering clutches and brakes have been proposed based on the dynamic model of synchroniser in order to decrease the wear of synchroniser inserts, make gear shift easy and reduce the shock noise for a positive independent mechanical split path transmission which attached an auto- matic shift system when shifting. A kinetics model for the process of synchroniser engagement is built and analyzed in the paper. Thus for optimizing the gear shift process which is divided into three phases a model reference fuzzy self-adaption system is adopted. Through a 6 000 km road experiment, the control strategy has proved feasible and dependable.

Possible Mechanical Transmission of SARS-CoV-2 Causing COVID-19 by Insects: Infection, Prevention, Implications, and Control

The new coronavirus called SARS-CoV-2 is a new type of virus named as COVID-19. Although, it has few similarities with pandemic flu viruses, the respiratory system and immune system are damaged through the viruses infected the population who has weakened immunity. SARS-CoV-2 spreads when people don’t have the sign and symptoms. This virus COVID-19 appears to spread more easily than the flu, and asymptomatic transmission may account for a greater proportion of COVID-19’s spreader over the World. In inundation of the current understanding, the roles of insect vectors are helping in the transmission of viral pathogens as well and the possible roles of some newly joined insects in the mechanical transmission of COVID-19. We also specifically provide the prevention and control methods related to contamination, disease burden, risk pattern in the family, near and dear to maintain the precision of social distancing and development of the immune system to fight against SARS-CoV-2.

Slow driving control of tracked vehicles with automated mechanical transmission based on fuzzy logic

In order to move tracked vehicles at an extremely slowspeed with automated mechanical transmission（ AMT）,slowdriving function was added in the original system. The principle and requirement of slowdriving function were analyzed. Based on analysis of slow driving characteristic,identification of slowdriving condition and fuzzy control algorithm,a control strategy of the clutch was designed. In order to realize slowdriving,the clutch was controlled in a slipping mode as manual driving. The vehicle speed was increased to a required speed and kept in a small range by engaging or disengaging the clutch to the approximate half engagement point. Based on the control strategy,a control software was designed and tested on a tracked vehicle with AMT. The test results showthat the control of the clutch with the slowdriving function was smoother than that with original systemand the vehicle speed was slower and steadier.

Design and Experimental Research on Seedling Pick-Up Mechanism of Planetary Gear Train with Combined Non-circular Gear Transmission

Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform intermittent transmission, and a concave and convex locking arc device, has a large rigid impact. To solve these problems, according to the design requirements for a dryland plug seedling transplanting mechanism, a rotary seedling pick-up mechanism of a planetary gear train with combined non-circular gear transmission of incomplete eccentric circular and noncircular gears was proposed. This has the characteristics of two-times greater fluctuation of the transmission ratio in a cycle, and can achieve a non-uniform continuous drive. Through analysis of the working principle of the seedling pick-up mechanism, its kinematics model was established. The human–computer interaction optimization method and self-developed computer-aided analysis and optimization software were used to obtain a set of parameters that satisfy the operation requirements of the seedling pick-up mechanism. According to the optimized parameters, the structure of the seedling pick-up mechanism was designed, a virtual prototype of the mechanism was created, and a physical prototype was manufactured. A virtual motion simulation of the mechanism was performed, high-speed photographic kinematics tests were conducted, and the kinematic properties of the physical prototype were investigated, whereby the correctness of the theoretical model and the optimized design of the mechanism were verified. Further, laboratory seedling pick-up tests were conducted. The success ratio of seedling pick-up was 93.8% when the seedling pick-up efficiency of the mechanism was 60 plants per minute per row, indicating that the mechanism has a high efficiency and success ratio for seedling pick-up and can be applied to a dryland plug seedling transplanter.

ENGINEERING CHARACTERISTICS AND ITS MECHANISM EXPLANATION OF VIBRATORY SYNCHRONIZATION TRANSMISSION

Vibratory synchronization transmission (VST) is a kind of special physicalphenomenon in inertia vibration mechanical systems. For an inertia vibration mechanical systemdriven by one pair of motors runs in step, even the power supply of one motor is cut off, the motorcan continue to keep rotating state under the vibration exciting of the machine body driven by onlyone other motor. And its rotating frequency will be the same as that of the other one. The transientprocess of this wonderful physical phenomenon has not been described quantitatively according tocurrent-existing mechanical models. On the basis of investigation of the engineering characteristicsof VST, a mechanical and electrical coupling mathematical model of a two-shaft inertia vibrationmachine is established. With this model, the transient process of VST is recurred quantitatively andsuccessfully, and a reasonable explanation is given.

Potential Risk of Transmission of Escherichia coli and Salmonella spp. Infections by the Musca domestica Fly and the Periplaneta americana Cockroach in the City of Cotonou (South Benin)

Background: The occurrence of bacterial infections sometimes involves synanthropic flies and cockroaches, as mechanical vectors of pathogenic microorganisms. The aim of this study was to identify the different species of flies and cockroaches that cohabit with humans in the city of Cotonou and determine the contribution of Musca domestica and Periplaneta americana in the transmission of bacteria responsible for infections in humans. Methods: Capture sessions during the day for flies and at night for cockroaches were carried out in 4 arrondissements of the city of Cotonou. The insects collected were transported to the Center of Research Entomological of Cotonou for identification, then sent to the Section Hygiene of Water and Food for microbiological analysis, enumeration and testing for human pathogenic bacteria. Results: A total of 351 flies and 26 cockroaches were collected at the sites, including two synanthropic species belonging to two families each. Musca domestica and Periplaneta americana were the most abundant species found after identification in the city of Cotonou. Thermo-tolerant coliforms and Escherichia coli were found on all specimens at varying concentrations. Salmonella spp. bacteria were identified in the fly population from the Dantokpa dump. Conclusion: Flies and cockroaches can transmit microorganisms to humans. The presence of Salmonella spp. among the specimens revealed that infections frequently caused by contaminated food or water are also transmitted to humans by flies. The presence of these germs on flies and cockroaches represents a potential risk of mechanical transmission to humans. It is, therefore, essential to continue investigations in order to assess the species of bacteria propagated, improve control strategies against these troublesome insects and adopt better hygiene conditions for better living.

Flexible piezoelectret film sensor for noncontact mechanical signal capture by multiple transmission media

Mechanical signal capture without physical contact has emerged as a highly promising research field and attracted tremendous attention due to its prosperous applications in household medical care,lifestyle monitoring and remote operation,offering users high level of safety,convenience and comfort.Moreover,noncontact sensing is ideal to maximize the immersive user experience in the human–machine interaction(HMI),eliminating interference to human activities and mechanical fatigue to the sensor,simultaneously.Herein,we report a self-powered flexible sensor integrated with irradiation cross-linked polypropylene(IXPP)piezoelectret film for noncontact sensing,featuring multi-functions to detect mechanical signals transmitted through solid,liquid and gaseous media and would facilitate their versatile practical applications.The folded-structure configuration of the sensor facilitates the improvement of the noncontact sensing sensitivity.For solid media,such as the rectangular wooden stick used in this study,the sensor can detect mechanical stimulus exerted at a distance of 100 cm.A system detection sensitivity up to 57 pC/kPa with a low detection limit of 0.6 kPa is achieved at a noncontact distance of 10 cm.Even when partly or completely immersed in water,the sensor effectively traces movement signals of human bodies underwater,demonstrating great advantages for non-inductive aquatic fitness training monitoring.Furthermore,due to the low acoustic impedance of piezoelectret film,speech recognition through gaseous medium is also achieved.We further introduce application demonstrations of the developed film sensors to monitor exercise postures and physiological signals without direct contact between human body and the sensor,displaying great potential to be incorporated into future smart electronics.This study commendably expands the application scope of piezoelectret materials,which will have profound implications for exploring novel intelligent human–machine interactions.