The subsection linear torsional model of hydrodynamic torque converter was established and further simplified. According to the identification theory, the frequency characteristic was achieved with the Matlab/ Ident ...The subsection linear torsional model of hydrodynamic torque converter was established and further simplified. According to the identification theory, the frequency characteristic was achieved with the Matlab/ Ident toolbox. Then parametric model was established by adopting the subsection linearization method, and the damp value was estimated. The curve and function of damp changing with speed ratio was also established by fitting. In order to validate the identification results, the experimental output was compared with the output of the model in which torque was chosen as input signal and speed as output signal in Matlab/Ident toolbox. It was shown that model output is in good agreement with experimental output.展开更多
Aim To develop blade mould CAD/CAM system of torque converter. Methods The mouldconsisted of four parts and an interactive computer program was developed to design a blade mould of torque converter based on UG at wor...Aim To develop blade mould CAD/CAM system of torque converter. Methods The mouldconsisted of four parts and an interactive computer program was developed to design a blade mould of torque converter based on UG at workstation. Results As compar- ed to manual modeling, it is showed in the application that this means not only improves the accuracy of blade shape and manufacture efficiency of converter, but also reduces costs. Conclusion It is proved that this CAD/CAM system is successful, and it opens up widely prospects for design and manufacture of the blade elementsand their moulds.展开更多
The mathematical model of a 3-element centripetal-turbine hydrodynamic torque converter and analytic description of fluid flow inside the hydrodynamic torque converter are investigated. A new torus coordinate system i...The mathematical model of a 3-element centripetal-turbine hydrodynamic torque converter and analytic description of fluid flow inside the hydrodynamic torque converter are investigated. A new torus coordinate system is proposed so as to quantitatively describe fluid movement inside the hydrodynamic torque converter. The particle movement inside the hydrodynamic torque converter is decomposed into meridional component movement and torus component movement, and a universal meridional streamline equation is derived. According to the relationship between the converter wheel velocity polygon and its blade angle, a torus streamline differential equation is established. The universal meridional streamline equation is approximated with square polynomials. The approximation error curve is given and the percentage error is not greater than 0.86%. Considered as a function of polar angle, the blade angle cotangent of each converter wheel varies linearly with polar angle. By using integral calculus, torus streamline equations are obtained. As a result, the problem of difficult flow description of the hydrodynamic torque converter is solved and a new analytic research system is established.展开更多
文摘The subsection linear torsional model of hydrodynamic torque converter was established and further simplified. According to the identification theory, the frequency characteristic was achieved with the Matlab/ Ident toolbox. Then parametric model was established by adopting the subsection linearization method, and the damp value was estimated. The curve and function of damp changing with speed ratio was also established by fitting. In order to validate the identification results, the experimental output was compared with the output of the model in which torque was chosen as input signal and speed as output signal in Matlab/Ident toolbox. It was shown that model output is in good agreement with experimental output.
文摘Aim To develop blade mould CAD/CAM system of torque converter. Methods The mouldconsisted of four parts and an interactive computer program was developed to design a blade mould of torque converter based on UG at workstation. Results As compar- ed to manual modeling, it is showed in the application that this means not only improves the accuracy of blade shape and manufacture efficiency of converter, but also reduces costs. Conclusion It is proved that this CAD/CAM system is successful, and it opens up widely prospects for design and manufacture of the blade elementsand their moulds.
基金supported by Henan Provincial Tackle Key Program of China (Grant No. 0424260038)
文摘The mathematical model of a 3-element centripetal-turbine hydrodynamic torque converter and analytic description of fluid flow inside the hydrodynamic torque converter are investigated. A new torus coordinate system is proposed so as to quantitatively describe fluid movement inside the hydrodynamic torque converter. The particle movement inside the hydrodynamic torque converter is decomposed into meridional component movement and torus component movement, and a universal meridional streamline equation is derived. According to the relationship between the converter wheel velocity polygon and its blade angle, a torus streamline differential equation is established. The universal meridional streamline equation is approximated with square polynomials. The approximation error curve is given and the percentage error is not greater than 0.86%. Considered as a function of polar angle, the blade angle cotangent of each converter wheel varies linearly with polar angle. By using integral calculus, torus streamline equations are obtained. As a result, the problem of difficult flow description of the hydrodynamic torque converter is solved and a new analytic research system is established.
