Leaching kinetics of acid-soluble Cr(VI) in chromite ore processing residue (COPR) using hydrofluoric (HF) acid solution as a leaching agent was investigated for potential remediation of COPR with industrial was...Leaching kinetics of acid-soluble Cr(VI) in chromite ore processing residue (COPR) using hydrofluoric (HF) acid solution as a leaching agent was investigated for potential remediation of COPR with industrial waste water containing HF. The results show that HF can effectively destabilize the Cr(VI)-bearing minerals, resulting in the mobilization of Cr(VI) from COPR into the leachate. Particle size significantly influences the leaching of acid-soluble Cr(VI) from COPR, followed by leaching time, whereas the effects of HF concentration and leaching temperature are slight and the influence of stirring rate is negligible. The leaching process of acid-soluble Cr(VI) from COPR is controlled by the diffusion through the product layer. The apparent activation energy is 8.696 kJ/mol and the reaction orders with respect to HF concentration and particle size is 0.493 8 and -2.013 3, respectively.展开更多
AIM: To review the current evidence of the treatment of hydrofluoric acid(HF) exposure to the human cornea.METHODS: A comprehensive manual search of the literature was conducted through the Ovid interface to assess th...AIM: To review the current evidence of the treatment of hydrofluoric acid(HF) exposure to the human cornea.METHODS: A comprehensive manual search of the literature was conducted through the Ovid interface to assess the mechanism and efficacy of each irrigator through a variety of clinical cases and experimental studies.· RESULTS: Ocular exposure to HF is extremely damaging to the eye and swift recognition and decontamination with an appropriate agent forms the basis of treatment. Although there are various decontamination solutions that have efficacy against the corrosive action of HF, irrigation with Hexafluorine proved to be the most safe and effective treatment for the eye.CONCLUSION: In conclusion emergency departments could benefit from the availability of Hexafluorine for the treatment of HF ocular burns in patients.展开更多
The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluori...The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluorine-based chemical method, was carried out under crucial factors such as different HF/ore ratios(1:1-3:1 g/mL) and leaching temperatures(50-85℃). The kinetics data fit well with the developed shrinking-core model, indicating that the leaching rate of Li was controlled by the chemical reaction and inner diffusion at the beginning of leaching(0-30 min) as a calculated apparent activation energy(Ea) of 20.62 kJ/mol. The inner diffusion became the rate-limiting step as the leaching continues(60-180 min). Moreover, effects of HF/ore ratio and leaching temperature on selective leaching behavior of Li, Al and Si were discussed. 90% of fluorine mainly existed as HF/F-in leaching solution, which can provide theoretical guidance for further removal or recovery of F.展开更多
Although hydrofluoric acid(HF)surface treatment is known to enhance the joining of metals with polymers,there is limited information on its effect on the joining of AZ31 alloy and carbon-fiber-reinforced plastics(CFRP...Although hydrofluoric acid(HF)surface treatment is known to enhance the joining of metals with polymers,there is limited information on its effect on the joining of AZ31 alloy and carbon-fiber-reinforced plastics(CFRPs)through laser-assisted metal and plastic direct joining(LAMP).This study uses the LAMP technique to produce AZ31-CFRP joints.The joining process involves as-received AZ31,HFpretreated AZ31,and thermally oxidized HF-pretreated AZ31 alloy sheets.Furthermore,the bonding strength of joints prepared with thermally oxidized AZ31 alloy sheets is examined to ascertain the combined effect of HF treatment and thermal oxidation on bonding strength.The microstructures,surface chemical interactions,and mechanical performances of joints are investigated under tensile shear loading.Various factors,such as bubble formation,CFRP resin decomposition,and mechanical interlocking considerably affect joint strength.Additionally,surface chemical interactions between the active species on metal parts and the polar amide along with carbonyl groups of polymer play a significant role in improving joint strength.Joints prepared with surface-pretreated AZ31 alloy sheets show significant improvements in bonding strength.展开更多
An enhanced leaching of Li fromα-spodumene was carried out using a mixture of hydrofluoric and sulfuric acid(HF/H2SO4)as the medium.Based on the optimized leaching conditions,the leaching kinetics of Li was investiga...An enhanced leaching of Li fromα-spodumene was carried out using a mixture of hydrofluoric and sulfuric acid(HF/H2SO4)as the medium.Based on the optimized leaching conditions,the leaching kinetics of Li was investigated in an ore/HF/H2SO4 ratio of 1:3:2 g:mL:mL with leaching temperature ranging from 50 to 100°C.The results indicate that the leaching kinetics of Li fitted well with a model based on the shrinking core model.In addition,the leaching rate of Li was controlled by chemical reactions and diffusion through the product layers.The apparent activation energy Ea was calculated to be 32.68 kJ/mol.Solid films were formed because of the generation of insoluble products such as cryolithionite(Na3Li2Al2F12),cryolite(Na3AlF6),calcium fluoride(CaF2),potassium cryolite(K2AlF5),aluminum fluoride(AlF3),and fluorosilicates(Na2SiF6 or KNaSiF6).Furthermore,the effects of the ore/HF ratio and leaching temperature on the leaching behavior of Li,Al and Si were investigated.The results indicate that the ore/HF ratio and leaching temperature could clearly affect the distribution of HF molecules on the leaching of Li,Al and Si,which are important for the selective leaching of Li over Al and Si with this fluorine-based chemical method.展开更多
In order to extract gallium from a high-silica-content flue dust generated in corundum production,a mixed acid solution of H2SO4 and HF was used for leaching,and test parameters of the leaching process were optimized....In order to extract gallium from a high-silica-content flue dust generated in corundum production,a mixed acid solution of H2SO4 and HF was used for leaching,and test parameters of the leaching process were optimized.Experimental results show that the leaching rate of gallium was only 38%when H2SO4 was used as leaching agent.Composition analysis results of micro areas in this corundum flue dust indicate that the content of gallium in silica-enriched phases was high;this portion of gallium was insoluble in H2SO4 solution.The leaching rate of gallium increased significantly with addition of HF due to corrosion of silica.Effects of reaction time,temperature,and concentrations of HF and H2SO4 on leaching rates of gallium were investigated.The leaching rate of gallium reached 91%when this corundum flue dust was leached in a mixed acid solution of H2SO4 and HF for 4 h,at a temperature of 80°C,with a liquid-to-solid ratio of 5:1(mL/g).The optimal concentrations of H2SO4 and HF in the mixed acid solution were 1.5 and 6.4 mol/L,respectively.展开更多
Coal is the world's most abundant energy source because of its abundance and relatively low cost. Due to the scarcity in the supply of high-grade coal, it is necessary to use low-.grade coal for fulfilling energy dem...Coal is the world's most abundant energy source because of its abundance and relatively low cost. Due to the scarcity in the supply of high-grade coal, it is necessary to use low-.grade coal for fulfilling energy demands of modern civilization. However, due to ItS high ash and moisture content, low-grade coal exerts the substantial impact on their consumption like pyrolysis, liquefaction, gasification and combus- tion process. The present research aimed to develop the efficient technique for the production of clean coal by optimizing the operating parameters with the help of response surface methodology. The effect of three independent variables such as hydrofluoric acid (HF) concentration (10-20% by vo!ume ),. temper- ature (60-100 ~C), and time (90-180 min), for ash reduction from the low-grade coal was Investigated.. A quadratic model was proposed to correlate the independent variables for maximum ash reduction at the optimum process condition by using central composite design (CC.D)method. The study reveals that HF concentration was the most effective parameter for ash reduction in comparison with time and temper- ature. It may be due to the higher F-statistics value for HF concentration, which effects to large extent of ash reduction. The characterization of coal was evaluated by Fourier transform infrared spectroscopy (FTIR) analysis and Field-emission scanning electron microscopy with energy-dispersive X-ray (FESEM- EDX) analysis for confirmation of the ash reduction.展开更多
The aim of this study was to determine if accelerated aging of porcelain veneering had an effect on the surface properties specific to a tetragonal-to-monoclinic transformation(TMT) of zirconia restorations. Thirty-...The aim of this study was to determine if accelerated aging of porcelain veneering had an effect on the surface properties specific to a tetragonal-to-monoclinic transformation(TMT) of zirconia restorations. Thirty-six zirconia samples were milled and sintered to simulate core fabrication followed by exposure to various combinations of surface treatments including as-received(control),hydrofluoric acid(HF), application of liner plus firings, application of porcelain by manual layering and pressing with firing, plus accelerated aging. The quantity of transformed tetragonal to monoclinic phases was analyzed utilized an X-ray diffractometer and one-way analysis of variance was used to analyze data. The control samples as provided from the dental laboratory after milling and sintering process had no TMT(X m5 0). There was an effect on zirconia samples of HF application with TMT(X m5 0.8%) and liner plus HF application with TMT(X m5 8.7%). There was an effect of aging on zirconia samples(no veneering) with significant TMT(X m5 70.25%). Both manual and pressing techniques of porcelain applications reduced the TMT(manual, X m5 4.41%, pressing,X m5 11.57%), although there was no statistical difference between them. It can be concluded that simulated applications of porcelain demonstrated the ability to protect zirconia from TMT after aging with no effect of a liner between different porcelain applications.The HF treatment also caused TMT.展开更多
Fiber Bragg grating Fabry-Perot (FBG F-P) cavity is used as the sensing model to measure the refractive index of the liquid solution. The cladding of the fiber, which is used as the F-P cavity, is etched by HF solutio...Fiber Bragg grating Fabry-Perot (FBG F-P) cavity is used as the sensing model to measure the refractive index of the liquid solution. The cladding of the fiber, which is used as the F-P cavity, is etched by HF solution to enhance the sensitivity to the external refractive index. The experimental results show that with the concentration change of the external solution, the effective refractive index of etched fiber will change, thus the spectra of FBG F-P cavity will appear a spilt point. The relationship be...展开更多
A simple and compact refractive index sensor is demonstrated by tapering a photonic crystal fiber (PCF) in-line interferometer. The PCF is spliced between two single-mode fibers and tapered via hydrofluoric acid etc...A simple and compact refractive index sensor is demonstrated by tapering a photonic crystal fiber (PCF) in-line interferometer. The PCF is spliced between two single-mode fibers and tapered via hydrofluoric acid etching. Its sensitivity in liquid is more than an order of magnitude larger than the untapered one. By optimizing the etching process, we can fabricate more uniformly and thinly tapered PCF interferometers with higher sensitivity in the future.展开更多
A method for fabricating deep grating structures on a silicon carbide (SIC) surface by a femtosecond laser and chemical-selective etching is developed. Periodic lines corresponding to laser-induced structure change ...A method for fabricating deep grating structures on a silicon carbide (SIC) surface by a femtosecond laser and chemical-selective etching is developed. Periodic lines corresponding to laser-induced structure change (LISC) are formed by femtosecond laser irradiation, and then the SiC material in the LISC zone is removed by a mixed solution of hydrofluoric acid and nitric acid to form grating grooves. Grating grooves with a high-aspect ratio of approximately 25 are obtained. To obtain a small grating period, femtosecond laser exposure through a phase mask was used to fabricate grating structures with a 1.07 μm period on the surface of the SiC.展开更多
A new method is presented to tune Bragg wavelength slightly by using hydrofluoric acid to etch fiber cladding.The spectral characteristics before and after etching and the change properties of Bragg wavelength are stu...A new method is presented to tune Bragg wavelength slightly by using hydrofluoric acid to etch fiber cladding.The spectral characteristics before and after etching and the change properties of Bragg wavelength are studied.Cladding modes are reduced during the etching process.High-order cladding modes are converted into radiation modes,and energy of cladding modes is coupled to the outside.As the cladding radius decreases,the Bragg wavelength shifts to longer direction.Experimental results show that this method can tune Bragg wavelength slightly,and the tunable range is 0.002-0.120 nm.展开更多
A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress result...A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hdrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.展开更多
基金Project(2009FJ1009) supported by Major Program of Hunan Provincial Science and Technology, ChinaProject(2005CB6237) supported by the National Basic Research Program of China
文摘Leaching kinetics of acid-soluble Cr(VI) in chromite ore processing residue (COPR) using hydrofluoric (HF) acid solution as a leaching agent was investigated for potential remediation of COPR with industrial waste water containing HF. The results show that HF can effectively destabilize the Cr(VI)-bearing minerals, resulting in the mobilization of Cr(VI) from COPR into the leachate. Particle size significantly influences the leaching of acid-soluble Cr(VI) from COPR, followed by leaching time, whereas the effects of HF concentration and leaching temperature are slight and the influence of stirring rate is negligible. The leaching process of acid-soluble Cr(VI) from COPR is controlled by the diffusion through the product layer. The apparent activation energy is 8.696 kJ/mol and the reaction orders with respect to HF concentration and particle size is 0.493 8 and -2.013 3, respectively.
文摘AIM: To review the current evidence of the treatment of hydrofluoric acid(HF) exposure to the human cornea.METHODS: A comprehensive manual search of the literature was conducted through the Ovid interface to assess the mechanism and efficacy of each irrigator through a variety of clinical cases and experimental studies.· RESULTS: Ocular exposure to HF is extremely damaging to the eye and swift recognition and decontamination with an appropriate agent forms the basis of treatment. Although there are various decontamination solutions that have efficacy against the corrosive action of HF, irrigation with Hexafluorine proved to be the most safe and effective treatment for the eye.CONCLUSION: In conclusion emergency departments could benefit from the availability of Hexafluorine for the treatment of HF ocular burns in patients.
基金Project(51474237)supported by the National Natural Science Foundation of China
文摘The fluorine-based chemical method shows great potential in leaching lithium(Li) from lepidolite. Leaching kinetics of Li in a mixture of sulfuric acid and hydrofluoric acid, which is a typical lixivant for the fluorine-based chemical method, was carried out under crucial factors such as different HF/ore ratios(1:1-3:1 g/mL) and leaching temperatures(50-85℃). The kinetics data fit well with the developed shrinking-core model, indicating that the leaching rate of Li was controlled by the chemical reaction and inner diffusion at the beginning of leaching(0-30 min) as a calculated apparent activation energy(Ea) of 20.62 kJ/mol. The inner diffusion became the rate-limiting step as the leaching continues(60-180 min). Moreover, effects of HF/ore ratio and leaching temperature on selective leaching behavior of Li, Al and Si were discussed. 90% of fluorine mainly existed as HF/F-in leaching solution, which can provide theoretical guidance for further removal or recovery of F.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF),funded by the Ministry of Science and ICT(RS-2023-00234757).
文摘Although hydrofluoric acid(HF)surface treatment is known to enhance the joining of metals with polymers,there is limited information on its effect on the joining of AZ31 alloy and carbon-fiber-reinforced plastics(CFRPs)through laser-assisted metal and plastic direct joining(LAMP).This study uses the LAMP technique to produce AZ31-CFRP joints.The joining process involves as-received AZ31,HFpretreated AZ31,and thermally oxidized HF-pretreated AZ31 alloy sheets.Furthermore,the bonding strength of joints prepared with thermally oxidized AZ31 alloy sheets is examined to ascertain the combined effect of HF treatment and thermal oxidation on bonding strength.The microstructures,surface chemical interactions,and mechanical performances of joints are investigated under tensile shear loading.Various factors,such as bubble formation,CFRP resin decomposition,and mechanical interlocking considerably affect joint strength.Additionally,surface chemical interactions between the active species on metal parts and the polar amide along with carbonyl groups of polymer play a significant role in improving joint strength.Joints prepared with surface-pretreated AZ31 alloy sheets show significant improvements in bonding strength.
基金Project(51474237) supported by the National Natural Science Foundation of China
文摘An enhanced leaching of Li fromα-spodumene was carried out using a mixture of hydrofluoric and sulfuric acid(HF/H2SO4)as the medium.Based on the optimized leaching conditions,the leaching kinetics of Li was investigated in an ore/HF/H2SO4 ratio of 1:3:2 g:mL:mL with leaching temperature ranging from 50 to 100°C.The results indicate that the leaching kinetics of Li fitted well with a model based on the shrinking core model.In addition,the leaching rate of Li was controlled by chemical reactions and diffusion through the product layers.The apparent activation energy Ea was calculated to be 32.68 kJ/mol.Solid films were formed because of the generation of insoluble products such as cryolithionite(Na3Li2Al2F12),cryolite(Na3AlF6),calcium fluoride(CaF2),potassium cryolite(K2AlF5),aluminum fluoride(AlF3),and fluorosilicates(Na2SiF6 or KNaSiF6).Furthermore,the effects of the ore/HF ratio and leaching temperature on the leaching behavior of Li,Al and Si were investigated.The results indicate that the ore/HF ratio and leaching temperature could clearly affect the distribution of HF molecules on the leaching of Li,Al and Si,which are important for the selective leaching of Li over Al and Si with this fluorine-based chemical method.
基金Projects(51274240,51204209)supported by the National Natural Science Foundation of China
文摘In order to extract gallium from a high-silica-content flue dust generated in corundum production,a mixed acid solution of H2SO4 and HF was used for leaching,and test parameters of the leaching process were optimized.Experimental results show that the leaching rate of gallium was only 38%when H2SO4 was used as leaching agent.Composition analysis results of micro areas in this corundum flue dust indicate that the content of gallium in silica-enriched phases was high;this portion of gallium was insoluble in H2SO4 solution.The leaching rate of gallium increased significantly with addition of HF due to corrosion of silica.Effects of reaction time,temperature,and concentrations of HF and H2SO4 on leaching rates of gallium were investigated.The leaching rate of gallium reached 91%when this corundum flue dust was leached in a mixed acid solution of H2SO4 and HF for 4 h,at a temperature of 80°C,with a liquid-to-solid ratio of 5:1(mL/g).The optimal concentrations of H2SO4 and HF in the mixed acid solution were 1.5 and 6.4 mol/L,respectively.
文摘Coal is the world's most abundant energy source because of its abundance and relatively low cost. Due to the scarcity in the supply of high-grade coal, it is necessary to use low-.grade coal for fulfilling energy demands of modern civilization. However, due to ItS high ash and moisture content, low-grade coal exerts the substantial impact on their consumption like pyrolysis, liquefaction, gasification and combus- tion process. The present research aimed to develop the efficient technique for the production of clean coal by optimizing the operating parameters with the help of response surface methodology. The effect of three independent variables such as hydrofluoric acid (HF) concentration (10-20% by vo!ume ),. temper- ature (60-100 ~C), and time (90-180 min), for ash reduction from the low-grade coal was Investigated.. A quadratic model was proposed to correlate the independent variables for maximum ash reduction at the optimum process condition by using central composite design (CC.D)method. The study reveals that HF concentration was the most effective parameter for ash reduction in comparison with time and temper- ature. It may be due to the higher F-statistics value for HF concentration, which effects to large extent of ash reduction. The characterization of coal was evaluated by Fourier transform infrared spectroscopy (FTIR) analysis and Field-emission scanning electron microscopy with energy-dispersive X-ray (FESEM- EDX) analysis for confirmation of the ash reduction.
基金supported in part by Deanship of Research, Taibah University, Kingdom of Saudi Arabia, and Matt Winstead, CDT, Vice President, Oral Arts Dental Labs, Huntsville, AL, USA
文摘The aim of this study was to determine if accelerated aging of porcelain veneering had an effect on the surface properties specific to a tetragonal-to-monoclinic transformation(TMT) of zirconia restorations. Thirty-six zirconia samples were milled and sintered to simulate core fabrication followed by exposure to various combinations of surface treatments including as-received(control),hydrofluoric acid(HF), application of liner plus firings, application of porcelain by manual layering and pressing with firing, plus accelerated aging. The quantity of transformed tetragonal to monoclinic phases was analyzed utilized an X-ray diffractometer and one-way analysis of variance was used to analyze data. The control samples as provided from the dental laboratory after milling and sintering process had no TMT(X m5 0). There was an effect on zirconia samples of HF application with TMT(X m5 0.8%) and liner plus HF application with TMT(X m5 8.7%). There was an effect of aging on zirconia samples(no veneering) with significant TMT(X m5 70.25%). Both manual and pressing techniques of porcelain applications reduced the TMT(manual, X m5 4.41%, pressing,X m5 11.57%), although there was no statistical difference between them. It can be concluded that simulated applications of porcelain demonstrated the ability to protect zirconia from TMT after aging with no effect of a liner between different porcelain applications.The HF treatment also caused TMT.
基金supported by the National Nature Scien- ce Foundation of China (Grant No.60672015).
文摘Fiber Bragg grating Fabry-Perot (FBG F-P) cavity is used as the sensing model to measure the refractive index of the liquid solution. The cladding of the fiber, which is used as the F-P cavity, is etched by HF solution to enhance the sensitivity to the external refractive index. The experimental results show that with the concentration change of the external solution, the effective refractive index of etched fiber will change, thus the spectra of FBG F-P cavity will appear a spilt point. The relationship be...
基金supported by the National "973" Program of China (No. 2010CB327800)the Natural Science Foundation of Jiangsu Province of China (No.BK2010247)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A simple and compact refractive index sensor is demonstrated by tapering a photonic crystal fiber (PCF) in-line interferometer. The PCF is spliced between two single-mode fibers and tapered via hydrofluoric acid etching. Its sensitivity in liquid is more than an order of magnitude larger than the untapered one. By optimizing the etching process, we can fabricate more uniformly and thinly tapered PCF interferometers with higher sensitivity in the future.
基金supported by the Collaborative Innovation Center of Suzhou Nano Science and Technologysupported by the National Basic Research Program of China (No.2012CB921804)+1 种基金the National Natural Science Foundation of China (Nos.11204236 and 61308006)The SEM work was done at the International Center for Dielectric Research (ICDR),Xi’an Jiaotong University,Xi’an,China
文摘A method for fabricating deep grating structures on a silicon carbide (SIC) surface by a femtosecond laser and chemical-selective etching is developed. Periodic lines corresponding to laser-induced structure change (LISC) are formed by femtosecond laser irradiation, and then the SiC material in the LISC zone is removed by a mixed solution of hydrofluoric acid and nitric acid to form grating grooves. Grating grooves with a high-aspect ratio of approximately 25 are obtained. To obtain a small grating period, femtosecond laser exposure through a phase mask was used to fabricate grating structures with a 1.07 μm period on the surface of the SiC.
基金supported by the National Natural Science Foundation of China (Nos.60837002 and 61177069)the Ph.D. Programs Foundation of Ministry of Education of China (No.20090009110003)the Fundamental Research Funds for the Central Universities (No.2011YJS219)
文摘A new method is presented to tune Bragg wavelength slightly by using hydrofluoric acid to etch fiber cladding.The spectral characteristics before and after etching and the change properties of Bragg wavelength are studied.Cladding modes are reduced during the etching process.High-order cladding modes are converted into radiation modes,and energy of cladding modes is coupled to the outside.As the cladding radius decreases,the Bragg wavelength shifts to longer direction.Experimental results show that this method can tune Bragg wavelength slightly,and the tunable range is 0.002-0.120 nm.
文摘A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hdrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.