Hydrogen diffusion coefficients in MlNi 3.75 Co 0.65 Mn 0.4 Al 0.2 alloy electrode as a function of state of charge (SOC) or temperature were determined by chronoamperometry. It is found that hydrogen diffusion coeffi...Hydrogen diffusion coefficients in MlNi 3.75 Co 0.65 Mn 0.4 Al 0.2 alloy electrode as a function of state of charge (SOC) or temperature were determined by chronoamperometry. It is found that hydrogen diffusion coefficient decreases with the increase of SOC or the decrease of temperature. The activation energy for hydrogen diffusion in the alloy electrode with 50%SOC is evaluated to be 19.9?kJ/mol.展开更多
Amorphous Ti2?xMgxNi (x=0?0.3) alloys were prepared by mechanical milling of elemental powders. Charge and discharge test, linear polarization (LP) and potential-step measurement were carried out to investigate the el...Amorphous Ti2?xMgxNi (x=0?0.3) alloys were prepared by mechanical milling of elemental powders. Charge and discharge test, linear polarization (LP) and potential-step measurement were carried out to investigate the electrochemical hydrogen storage properties of the alloys before and after heat treatment. The results show that the maximum discharge capacity of heat-treated Ti2?xMgxNi alloy can reach 275.3 mA·h/g, which is 100 mA·h/g higher than that of the amorphous Ti2?xMgxNi alloy. The heat-treated Ti1.9Mg0.1Ni alloy presents the best cycling stability with a high discharge capacity of 210 mA·h/g after 30 cycles. The results of LP and potential-step measurement of the Ti1.9Mg0.1Ni alloy show that the exchange current density increases from 101.1 to 203.3 mA/g and the hydrogen diffusion coefficient increases from 3.20×10?11 to 2.70×10?10 cm2/s after the heat treatment, indicating that the heat treatment facilitates both the charge-transfer and hydrogen diffusion processes, resulting in an improvement in electrochemical hydrogen storage properties of Ti2?xMgxNi (x=0?0.3) alloys.展开更多
There is considerable interest in using ionic liquids(ILs) as protic electrolytes. However, the reported proton transfer rate in ILs is quite slow. In this study, we report functionalizing imidazolium ILs with alcohol...There is considerable interest in using ionic liquids(ILs) as protic electrolytes. However, the reported proton transfer rate in ILs is quite slow. In this study, we report functionalizing imidazolium ILs with alcohol hydroxyls, aiming at constructing hydrogen bonding networks in the electrolyte, can stimulate fast proton hopping transfer. For demonstration, the diffusion of proton and Cl. in 1-(3-hydroxypropyl)-3-methylimidazolium tetrafluoroboride(C_3OHmimBF_4) were studied using cyclic voltammetry and potentiostatic method at 30 °C. The diffusion coefficient of proton is about one order of magnitude higher than that of Cl. in the same electrolyte, and about 5 times that of proton in the non-hydydroxyl 1-(butyl)-3-methylimidazolium tetrafluoroboride(BmimBF_4) when normalized to the diffusion coefficients of Cl. in respective ILs. In the meantime, 1H NMR spectra revealed a strong hydrogen bonding interaction between proton and C_3OHmimBF_4 which is absent between proton and BmimBF_4, thus the significantly higher diffusion coefficient of proton in C_3OHmimBF_4 may suggest the formation of effective hydrogen bonding networks, enabling rapid proton hopping via the Grotthuss mechanism.展开更多
The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different ...The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti（C,N）precipitate in hot strips.It is found that the Ti（C,N）precipitate in hot strip using Path 2（put into asbestos box and air cooled）are finer and much more in quantity than that in hot strip using Path 1（held at 730℃ for 30min and furnace cooled）.The morphology of Ti（C,N）precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti（C,N）precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance.展开更多
文摘Hydrogen diffusion coefficients in MlNi 3.75 Co 0.65 Mn 0.4 Al 0.2 alloy electrode as a function of state of charge (SOC) or temperature were determined by chronoamperometry. It is found that hydrogen diffusion coefficient decreases with the increase of SOC or the decrease of temperature. The activation energy for hydrogen diffusion in the alloy electrode with 50%SOC is evaluated to be 19.9?kJ/mol.
基金Project(51201089)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions of China
文摘Amorphous Ti2?xMgxNi (x=0?0.3) alloys were prepared by mechanical milling of elemental powders. Charge and discharge test, linear polarization (LP) and potential-step measurement were carried out to investigate the electrochemical hydrogen storage properties of the alloys before and after heat treatment. The results show that the maximum discharge capacity of heat-treated Ti2?xMgxNi alloy can reach 275.3 mA·h/g, which is 100 mA·h/g higher than that of the amorphous Ti2?xMgxNi alloy. The heat-treated Ti1.9Mg0.1Ni alloy presents the best cycling stability with a high discharge capacity of 210 mA·h/g after 30 cycles. The results of LP and potential-step measurement of the Ti1.9Mg0.1Ni alloy show that the exchange current density increases from 101.1 to 203.3 mA/g and the hydrogen diffusion coefficient increases from 3.20×10?11 to 2.70×10?10 cm2/s after the heat treatment, indicating that the heat treatment facilitates both the charge-transfer and hydrogen diffusion processes, resulting in an improvement in electrochemical hydrogen storage properties of Ti2?xMgxNi (x=0?0.3) alloys.
基金supported by the National Natural Science Foundation of China(21173161,21673164)the Large-scale Instrument and Equipment Sharing Foundation of Wuhan University
文摘There is considerable interest in using ionic liquids(ILs) as protic electrolytes. However, the reported proton transfer rate in ILs is quite slow. In this study, we report functionalizing imidazolium ILs with alcohol hydroxyls, aiming at constructing hydrogen bonding networks in the electrolyte, can stimulate fast proton hopping transfer. For demonstration, the diffusion of proton and Cl. in 1-(3-hydroxypropyl)-3-methylimidazolium tetrafluoroboride(C_3OHmimBF_4) were studied using cyclic voltammetry and potentiostatic method at 30 °C. The diffusion coefficient of proton is about one order of magnitude higher than that of Cl. in the same electrolyte, and about 5 times that of proton in the non-hydydroxyl 1-(butyl)-3-methylimidazolium tetrafluoroboride(BmimBF_4) when normalized to the diffusion coefficients of Cl. in respective ILs. In the meantime, 1H NMR spectra revealed a strong hydrogen bonding interaction between proton and C_3OHmimBF_4 which is absent between proton and BmimBF_4, thus the significantly higher diffusion coefficient of proton in C_3OHmimBF_4 may suggest the formation of effective hydrogen bonding networks, enabling rapid proton hopping via the Grotthuss mechanism.
基金Sponsored by National Natural Science Foundation of China(50527402)National Basic Research Program(973Program)of China(2011CB606306-2)
文摘The Ti（C,N）precipitation and texture evolution in ultra-low carbon Ti-bearing enamel steel were studied to discover their correlation.Two different cooling paths of simulative coiling were adopted to gain different morphologies of Ti（C,N）precipitate in hot strips.It is found that the Ti（C,N）precipitate in hot strip using Path 2（put into asbestos box and air cooled）are finer and much more in quantity than that in hot strip using Path 1（held at 730℃ for 30min and furnace cooled）.The morphology of Ti（C,N）precipitate in hot strip has great effect on recrystallization texture in the subsequent cold-rolled annealed sheet.γ-fiber texture of strong recrystallization is gained in coldrolled and annealed sheet came from Path 1.On the contrary,in the one came from Path 2,theγ-fiber texture is weak.This may be due to the pinning force of numerous fine Ti（C,N）precipitate which retard the growth of preferential nucleated{111}orientated grains.Annealed steel sheets in the test came from both paths have excellent fishscale resistance.
