A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;fi...A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity evaluation.The results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.展开更多
Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF)is of great significance for the design and optimization of advanced EHFs.In this work,the ...Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF)is of great significance for the design and optimization of advanced EHFs.In this work,the effect of deep hydrogenation on the pyrolysis of commercial RP-3 is investigated.Fuels with different hydrogenation degrees were obtained by the partially and completely catalytic hydrogenation and their pyrolysis performances were investigated using an apparatus equipped with an electrically heated tubular reactor.The results show that with the increase of hydrogenation degree,fuel conversion almost remains constant during the pyrolysis process(500e650C,4 MPa);however,the heat sink increases slightly,and the anti-coking performance significantly improves,which are highly related to their H/C ratios.Detailed characterisations reveal that the difference of the pyrolysis performance can be ascribed to the content of aromatics and cycloalkanes:the former are prone to initiate secondary reactions to form coking precursors,while the latter could act as the hydrogen donor and release hydrogen,which will terminate the radical propagation reactions and suppress the coke deposition.This work should provide the guidance for upgrading EHFs by modulating the composition of EHFs.展开更多
Optimizing the intrinsic activity of non-noble metal by precisely tailoring electronic structure offers an appealing way to construct cost-effective catalysts for selective biomass valorization.Herein,we reported a P-...Optimizing the intrinsic activity of non-noble metal by precisely tailoring electronic structure offers an appealing way to construct cost-effective catalysts for selective biomass valorization.Herein,we reported a P-doping bifunctional catalyst(Ni-P/mSiO_(2))that achieved 96.6%yield for the hydrogenation rearrangement of furfural to cyclopentanone at mild conditions(1 MPaH_(2),150°C).The turnover frequency of Ni-P/mSiO_(2)was 411.9 h^(-1),which was 3.2-fold than that of Ni/mSiO_(2)(127.2 h^(-1)).Detailed characterizations and differential charge density calculations revealed that the electron-deficient Niδ+species were generated by the electron transfer from Ni to P,which promoted the ring rearrangement reaction.Density functional theory calculations illustrated that the presence of P atoms endowed furfural tilted adsorb on the Ni surface by the C=O group and facilitated the desorption of cyclopentanone.This work unraveled the connection between the localized electronic structures and the catalytic properties,so as to provide a promising reference for designing advanced catalysts for biomass valorization.展开更多
The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirm...The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirmation if copper could be a good promoter for In_(2)O_(3).Herein,the Cu promoted In_(2)O_(3) catalyst was prepared using a deposition-precipitation method.Such prepared Cu/In_(2)O_(3) catalyst shows significantly higher CO_(2) conversion and space time yield(STY)of methanol,compared to the un-promoted In_(2)O_(3) catalyst.The loading of Cu facilitates the activation of both H_(2) and CO_(2) with the interface between the Cu cluster and defective In_(2)O_(3) as the active site.The Cu/In_(2)O_(3) catalyst takes the CO hydrogenation pathway for methanol synthesis from CO_(2) hydrogenation.It exhibits a unique size effect on the CO adsorption.At temperatures below 250℃,CO adsorption on Cu/In_(2)O_(3) is stronger than that on In_(2)O_(3),causing higher methanol selectivity.With increasing temperatu res,the Cu catalyst aggregates,which leads to the formation of weak CO adsorption site and causes a decrease in the methanol selectivity.Compared with other metal promoted In_(2)O_(3) catalysts,it can be concluded that the catalyst with stronger CO adsorption possesses higher methanol selectivity.展开更多
Catalysts with varying Fe contents were prepared using a sequential impregnation method to investigate the effects of Fe addition on the physicochemical properties of Pt/Al_(2)O_(3) and their performance in methylcycl...Catalysts with varying Fe contents were prepared using a sequential impregnation method to investigate the effects of Fe addition on the physicochemical properties of Pt/Al_(2)O_(3) and their performance in methylcyclohexane(MCH)dehydrogenation.The results demonstrated that the addition of Fe to Pt/Al_(2)O_(3) enhanced the electron density of Pt and improved catalytic activity,while exhibiting negligible influence on the catalytic selectivity for toluene.When the Fe content was 0.057%,the catalyst exhibited the highest MCH consumption rate,which was approximately two times higher than that of the catalyst without Fe.Additionally,the incorporation of Fe inhibited the formation of coke and reduced the quantity of coke deposits on the catalyst,thereby improving its catalytic durability.Overall,Fe shows promise as a prospective secondary element for Pt/Al_(2)O_(3) to enhance the MCH dehydrogenation performance.展开更多
For the first time,the MgH_(2)–NaAlH_(4)(ratio 4:1)destabilized system with CoTiO_(3) addition has been explored.The CoTiO_(3)-doped MgH_(2)–NaAlH_(4) sample begins to dehydrogenate at 130℃,which is declined by 40...For the first time,the MgH_(2)–NaAlH_(4)(ratio 4:1)destabilized system with CoTiO_(3) addition has been explored.The CoTiO_(3)-doped MgH_(2)–NaAlH_(4) sample begins to dehydrogenate at 130℃,which is declined by 40℃ compared to the undoped MgH_(2)–NaAlH_(4).Moreover,the de/rehydrogenation kinetics characteristics of the CoTiO_(3)-doped MgH_(2)–NaAlH_(4) were greatly ameliorated.With the inclusion of CoTiO_(3),the MgH_(2)–NaAlH_(4) composite absorbed 5.2 wt.%H_(2),higher than undoped MgH_(2)–NaAlH_(4).In the context of dehydrogenation,the CoTiO_(3)-doped MgH_(2)–NaAlH_(4) sample desorbed 2.6 wt.%H_(2),almost doubled compared to the amount of hydrogen desorbed from the undoped MgH_(2)–NaAlH_(4) sample.The activation energy obtained by the Kissinger analysis for MgH_(2) decomposition was significantly lower by 35.9 kJ/mol than the undoped MgH_(2)–NaAlH_(4) sample.The reaction mechanism demonstrated that new phases of MgCo and AlTi_(3) were generated in situ during the heating process and are likely to play a substantial catalytic function and be useful in ameliorating the de/rehydrogenation properties of the destabilized MgH_(2)–NaAlH_(4) system with the inclusion of CoTiO_(3).展开更多
Magnesium hydride is one of the most promising solid-state hydrogen storage materials for on-board application.Hydrogen desorption from MgH_(2) is accompanied by the formation of the Mg/MgH_(2) interfaces,which may pl...Magnesium hydride is one of the most promising solid-state hydrogen storage materials for on-board application.Hydrogen desorption from MgH_(2) is accompanied by the formation of the Mg/MgH_(2) interfaces,which may play a key role in the further dehydrogenation process.In this work,first-principles calculations have been used to understand the dehydrogenation properties of the Mg(0001)/MgH_(2)(110) interface.It is found that the Mg(0001)/MgH_(2)(110) interface can weaken the Mg-H bond.The removal energies for hydrogen atoms in the interface zone are significantly lower compared to those of bulk MgH_(2).In terms of H mobility,hydrogen diffusion within the interface as well as into the Mg matrix is considered.The calculated energy barriers reveal that the migration of hydrogen atoms in the interface zone is easier than that in the bulk MgH_(2).Based on the hydrogen removal energies and diffusion barriers,we conclude that the formation of the Mg(0001)/MgH_(2)(110) interface facilitates the dehydrogenation process of magnesium hydride.展开更多
Alumina(Al_(2)O_(3))is widely used in the chemical industry as the catalyst and support due to its high specific surface area,abundant pore size distribution and chemical stability.However,the occurrence of hydration ...Alumina(Al_(2)O_(3))is widely used in the chemical industry as the catalyst and support due to its high specific surface area,abundant pore size distribution and chemical stability.However,the occurrence of hydration in water environment,result in outstanding decrease in specific surface area and collapse of pore structure.In this work,dodecyl phosphoric acid(PA)is used to modify the surface of Al_(2)O_(3)to obtain a series of hydrophobic material(Al_(2)O_(3)-PA).Based on XPS and NMR analysis,PA is chemically bonded on Al_(2)O_(3)to form PAOAAl bond.Furthermore,BET and WCA results display that Al_(2)O_(3)-1PA exhibits excellent the hydrophobicity and hydrothermal stability while maintains the pore structure.Take it as the substrate to support the Pd nanoparticles,the as-prepared Pd/Al_(2)O_(3)-PA shows the superior catalytic performance in the hydrogenation of phenol and anthraquinone relative to Pd/Al_(2)O_(3),indicating the accessibility of Pd sites after PA modification.Especially,the significantly enhanced stability is also obtained in four cycles for aqueous phenol hydrogenation.This can be ascribed that the PA modification inhibits the aggregation of Pd nanoparticles and the products adhesion in the reaction process.The extension of PA coatings to monolithic catalysts could expand their current capabilities in industrial applications and warrants ongoing investigation.展开更多
Cu-based catalysts are widely employed for CO_(2) hydrogenation to methanol,which is expected as a promising process to achieving carbon neutrality.However,most Cu-based catalysts still suffer from low methanol yield ...Cu-based catalysts are widely employed for CO_(2) hydrogenation to methanol,which is expected as a promising process to achieving carbon neutrality.However,most Cu-based catalysts still suffer from low methanol yield with a passable CO_(2) conversion and lack insight into its reaction mechanism for guiding the design of catalysts.In this work,Cu^(+)/CeZrO_(x) interfaces are engineered by employing a series of ceria-zirconia solid solution catalysts with various Ce/Zr ratios,forming a Cu^(+)-O_(v)-Ce^(3+)structure where Cu^(+)atoms are bonded to the oxygen vacancies(O_(v))of ceria.Compared to Cu/CeO_(2) and Cu/ZrO_(2),the optimized catalyst(i.e.,Cu_(0.3)Ce_(0.3)Zr_(0.7))exhibits a much higher mass-specific methanol formation rate(192g_(MeOH)/kg_(cat)/h)at 240℃and 3 MPa.Through a series of in-situ and ex-situ characterization,it is revealed that oxygen vacancies in solid solutions can effectively assist the activation of CO_(2) and tune the electronic state of copper to promote the formation of Cu^(+)/CeZrO_(x) interfaces,which stabilizes the key*CO intermediate,inhibits its desorption and facilitates its further hydrogenation to methanol via the reverse watergas-shift(RWGS)+CO-Hydro pathway.Therefore,the concentration of*CO or the apparent Cu^(+)/(Cu^(+)+Cu^(0))ratio could be employed as a quantitative descriptor of the methanol formation rate.This work is expected to give a deep insight into the mechanism of metal/support interfaces in CO_(2) hydrogenation to methanol,offering an effective strategy to develop new catalysts with high performance.展开更多
CO_(2)hydrogenation has been considered to be a highly promising route for the production of high-value olefins(HVOs)while also mitigating CO_(2)emissions.However,it is challenging to achieve high selectivity and main...CO_(2)hydrogenation has been considered to be a highly promising route for the production of high-value olefins(HVOs)while also mitigating CO_(2)emissions.However,it is challenging to achieve high selectivity and maintain stable performance for HVOs(ethylene,propylene,and linear a-olefins)over a prolonged reaction time due to the difficulty in precise control of carbon coupling and rapid catalyst deactivation.Herein,we present a selective Ba and Na co-modified Fe catalyst enriched with Fe_(5)C_(2)and Fe_(3)C active sites that can boost HVO synthesis with up to 66.1%selectivity at an average CO_(2)conversion of 38%for over 500 h.Compared to traditional NaFe catalyst,the combined effect of Ba and Na additives in the NaBaFe-0.5 catalyst suppressed excess oxidation of FeCxsites by H_(2)O.The absence of Fe3O4phase in the spent NaBaFe-0.5 catalyst reflects the stabilization effect of the co-modifiers on the FeCxsites.This study provides a strategy to design Fe-based catalysts that can be scaled up for the stable synthesis of HVOs from CO_(2)hydrogenation.展开更多
The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide poten...The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide potential window with promising Faradic efficiency(FE) towards BHMF,Cu-based electrode has been in the center of investigation.However,its structure-activity relationship remains ambiguous and its intrinsic catalytic activity is still unsatisfactory.In this work,we develop a two-step oxidation-reduction strategy to reconstruct the surface atom arrangement of the Cu foam(CF).By combination of multiple quasi-situ/in-situ techniques and density functional theory(DFT) calculation,the critical factor that governs the reaction is demonstrated to be facet effect of the metallic Cu crystal:Cu(110) facet accounts for the most favorable surface with enhanced chemisorption with reactants and selective production of BHMF,while Cu(100) facet might trigger the accumulation of the by-product 5,5'-bis(hydroxy methy)hydrofurion(BHH).With the optimized composition of the facets on the reconstructed Cu(OH)_(2)-ER/CF,the performance could be noticeably enhanced with a BHMF FE of 92.3% and HMF conversion of 98.5% at a potential of -0.15 V versus reversible hydrogen electrode(vs.RHE) in 0.1 M KOH solution.This work sheds light on the incomplete mechanistic puzzle for Cu-catalyzed electrochemical hydrogenation of HMF to BHMF,and provides a theoretical foundation for further precise design of highly efficient catalytic electrodes.展开更多
Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum ...Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum resource. However, development of robust catalyst with controllable selectivity and stability remains a challenge. Herein, we report that Zn-promoted Fe catalyst can boost the stable and selective production of light olefins from CO_(2). Specifically, the Zn-promoted Fe exhibits a highly stable activity and olefin selectivity over 200 h time-on-stream compared to the unpromoted Fe catalyst, primarily owing to the preservation of active χ-Fe_(5)C_(2) phase. Structural characterizations of the spent catalysts suggest that Zn substantially regulates the content of iron carbide on the surface and suppresses the reoxidation of bulk iron carbide during the reaction. DFT calculations confirm that adsorption of surface carbon atoms and graphene-like carbonaceous species are not thermochemically favored on Zn-promoted Fe catalyst. Carbon deposition by CAC coupling reactions of two surface carbon atoms and dehydrogenation of CH intermediate are also inhibited. Furthermore, the effects of Zn on antioxidation of iron carbide were also investigated. Zn favored the hydrogenation of surface adsorbed oxygen atoms to H_(2)O and the desorption of H_(2)O, which reduces the possibility of surface carbide being oxidized by the chemisorbed oxygen.展开更多
The interaction between a promoter and an active metal crucially impacts catalytic performance.Nowadays,the influence of promoter contents and species has been intensively considered.In this study,we investigate the e...The interaction between a promoter and an active metal crucially impacts catalytic performance.Nowadays,the influence of promoter contents and species has been intensively considered.In this study,we investigate the effect of the iron(Fe)-zinc(Zn)proximity of Fe-Zn bimetallic catalysts on CO_(2)hydrogenation performance.To eliminate the size effect,Fe_(2)O_(3)and ZnO nanoparticles with uniform size are first prepared by the thermal decomposition method.By changing the loading sequence or mixing method,a series of Fe-Zn bimetallic catalysts with different Fe-Zn distances are obtained.Combined with a series of characterization techniques and catalytic performances,Fe-Zn bimetallic proximity for compositions of Fe species is discussed.Furthermore,we observe that a smaller Fe-Zn distance inhibits the reduction and carburization of the Fe species and facilitates the oxidation of carbides.Appropriate proximity of Fe and Zn(i.e.,Fe_1Zn_(1)-imp and Fe_(1)Zn_(1)-mix samples)results in a suitable ratio of the Fe_5C_(2)and Fe_(3)O_(4)phases,simultaneously promoting the reverse water-gas shift and Fischer-Tropsch synthesis reactions.This study provides insight into the proximity effect of bimetallic catalysts on CO_(2)hydrogenation performance.展开更多
The liquid phase selective hydrogenation of cinnamaldehyde has been investigated over the catalysts Co-C-T(T=400-700℃),which were derived from the carbonization of the MOF precursor Co-BTC at different temperatures i...The liquid phase selective hydrogenation of cinnamaldehyde has been investigated over the catalysts Co-C-T(T=400-700℃),which were derived from the carbonization of the MOF precursor Co-BTC at different temperatures in inert atmosphere.Co-C-500 exhibited a higher conversion(85.3%)than those carbonized at other temperatures,with 51.5%selectivity to cinnamyl alcohol,under a mild condition(90℃,4 h,2 MPa H_(2),solvent:9 ml ethanol and 1 ml water).The high catalytic activity of Co-C-500 can be ascribed to the large specific surface area of the catalyst,the uniformly dispersed metallic cobalt nanoparticles,and the more defect sites on the carbon support.Moreover,Co-C-500 showed excellent reusability in 5 successive cycles,mainly related to the uniformly dispersed cobalt nanoparticles embedded in carbon support.展开更多
The promoting effect of zirconium addition on Pd/Beta catalysts has been investigated in the selective hydrogenation of phenol to cyclohexanone in the aqueous phase. The activity of the catalyst in the reaction was gr...The promoting effect of zirconium addition on Pd/Beta catalysts has been investigated in the selective hydrogenation of phenol to cyclohexanone in the aqueous phase. The activity of the catalyst in the reaction was greatly improved by introducing Zr atoms into the framework of H-Beta zeolite. An important synergy between the Zr species and Pd, affecting the Pd dispersion state on the support, has been observed. The modification of the support with Zr^(4+) improves the Lewis/Brφnsted acid ratio of the catalyst, suppressing the further transformation of cyclohexanone. The kinetics of Pd/Zr-Beta catalyst showed high selectivity to cyclohexanone. The catalytic results showed that the Pd/Zr-Beta had the best catalytic performance at the desired temperature of 80℃ for 5 h.展开更多
The overall performance of metal catalysts can be efficiently adjusted by modifying carbon carriers with different valence sulfur precursors.The wet impregnation technique successfully prepared carbon material carrier...The overall performance of metal catalysts can be efficiently adjusted by modifying carbon carriers with different valence sulfur precursors.The wet impregnation technique successfully prepared carbon material carriers doped with varying sources of sulfur(Na_(2)SO_(4),NaHSO_(3),Na_(2)S·9H_(2)O).Palladium carbon catalysts doped with different sulfur precursors had been prepared with the aid of the liquid-phase reduction method of the selective hydrogenation of o-chloronitrobenzene(o-CNB)to o-chloroaniline(o-CAN).The catalyst prepared for Na_(2)S·9H_(2)O as a precursor has excellent performance,and the selectivity for o-CAN is more than 99.9%at 100%conversion.In addition,the characterization results show that with the decrease of S valence,the electronic effect between S and Pd increases,and the outer electron shift of Pd increases,which reduces the adsorption and dissociation ability of Pd to hydrogen,resulting in excellent selectivity.The effects provided a good idea for the hydrogenation of o-CNB and a different point of view on sulfur doping in a variety of hydrogenation reactions.展开更多
Doping heteroatoms on carbon materials could bring some special advantages for using as catalyst support.In this work, a boron doped lamellar porous carbon(B-LPC) was prepared facilely and utilized as carbonbased supp...Doping heteroatoms on carbon materials could bring some special advantages for using as catalyst support.In this work, a boron doped lamellar porous carbon(B-LPC) was prepared facilely and utilized as carbonbased support to construct Cu/B-LPC catalyst for dimethyl oxalate(DMO) hydrogenation. Doping boron could make the B-LPC own more defects on surface and bigger pore size than B-free LPC, which were beneficial to disperse and anchor Cu nanoparticles. Moreover, the interaction between Cu species and B-LPC could be strengthened by the doped B, which not only stabilized the Cu nanoparticles, but also tuned the valence of Cu species to maintain more Cu^(+). Therefore, the B-doped Cu/B-LPC catalyst exhibited stronger hydrogenation ability and obtained higher alcohols selectivity than Cu/LPC, as well as high stability without decrease of DMO conversion and ethylene glycol selectivity even after 300 h of reaction at 240℃.展开更多
Selective hydrogenation of hydroxyaldehydes to polyalcohols is challenging due to the competitive hydrogenation of C=O and CAO.This study develops heterogeneous Cu catalysts for the selective synthesis of ethylene gly...Selective hydrogenation of hydroxyaldehydes to polyalcohols is challenging due to the competitive hydrogenation of C=O and CAO.This study develops heterogeneous Cu catalysts for the selective synthesis of ethylene glycol via batch liquid-phase hydrogenation of glycolaldehyde.SiO_(2)supported Cu,fabricated by ammonia evaporation,enables to catalyze the C=O bond hydrogenation with retaining the CAO bond intact,yielding higher selective hydrogenation activity with ethylene glycol selectivity up to 99.8%relative to MgO,Al_(2)O_(3),CeO_(2),and TiO_(2)supports and Cu/SiO_(2)synthesized by deposition–precipitation and impregnation.Characterizations confirm that highly efficient 20Cu/SiO_(2)-AE-623 K catalyst fabricated by ammonia evaporation is featured with larger Cu^(0)and Cu^(+)surface areas,of which the Cu^(+)species created from reducing copper phyllosilicate exhibit higher reactivity.A synergistic effect between Cu^(+)and Cu^(0)facilitates the selective adsorption/activation of glycolaldehyde on Cu^(+)sites and the dissociation of H_(2)on Cu^(0)sites,bringing a remarkable improvement in the selective hydrogenation performance.展开更多
Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core...Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core–shell and PdAg alloy structure with controlled size and surface compositions were prepared to demonstrate synergetic mechanisms,particularly,ligand and strain effects on activity and ethylene selectivity for acetylene hydrogenation.The performance evaluation indicates that Ag@Pd catalysts with well-controlled Pd-shell thickness can effectively lower apparent activation energy and improve ethylene selectivity.Hydrogenation activity increases from 0.019 to 0.062 s^(-1) with decreasing Pd-shell thickness under mild conditions,which is 3–6 times higher than their alloyed and monometallic counterparts.Combined characterizations and density functional theory are conducted to reveal such shell-thickness-dependent performance.The ligand effect arising from Ag alloying in the interface of Ag@Pd2ML observes the strongest binding of acetylene,but it diminished sharply and the strain effect gets more prevailing with increasing shell thickness.The competition of ethylene desorption and deephydrogenation were also investigated to understand the selectivity governing factors,and the selectivity descriptor(0.5BE(C_(2)H_(4))–BE(H))was built to match the contribution of ligand and strain effect on the different surfaces of Pd-Ag bimetallic NPs.The exploration of synergetic mechanisms among bimetallic NPs with varied structure and surface compositions in this work can help us to deepen the understanding catalyst structure–activity relationship and provide a feasible way to optimize the overall catalytic performance.展开更多
Dimethyl oxalate(DMO) hydrogenation is a crucial step in the coal to ethylene glycol(CTEG) process.Herein, Cu catalyst supported on fibrous mesoporous silica(Cu/FMS) was synthesized via liquid phase deposition techniq...Dimethyl oxalate(DMO) hydrogenation is a crucial step in the coal to ethylene glycol(CTEG) process.Herein, Cu catalyst supported on fibrous mesoporous silica(Cu/FMS) was synthesized via liquid phase deposition technique and applied for the DMO hydrogenation to EG. The catalyst exhibited a remarkable EG selectivity of 96.95% and maintained its activity without deactivation for 1000 h. Fibers of FMS support and liquid phase deposition technology cooperated to give high dispersion of Cu species in the Cu/FMS catalyst, resulting in a high Cu surface area. The formation of Si—O—Cu during catalyst preparation process increased the Cu^(+)/(Cu^(0)+ Cu^(+)) ratio and enhanced the thermal and valence stability of Cu species.The high Cu^(+) surface area and Cu stability(thermal and valence stability) of the Cu/FMS catalyst were key factors for achieving superior EG selectivity and ultra-high stability.展开更多
基金the financial support from the Sinopec Catalyst Co.Ltd.,China。
文摘A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity evaluation.The results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.
基金support from National Key Research and Development Program of China(2021YFC2103701)the National Postdoctoral Program of China(GZB20230630)the National Natural Science Foundation of China(22208295).
文摘Understanding the relationship between the chemical composition and pyrolysis performance of endothermic hydrocarbon fuel(EHF)is of great significance for the design and optimization of advanced EHFs.In this work,the effect of deep hydrogenation on the pyrolysis of commercial RP-3 is investigated.Fuels with different hydrogenation degrees were obtained by the partially and completely catalytic hydrogenation and their pyrolysis performances were investigated using an apparatus equipped with an electrically heated tubular reactor.The results show that with the increase of hydrogenation degree,fuel conversion almost remains constant during the pyrolysis process(500e650C,4 MPa);however,the heat sink increases slightly,and the anti-coking performance significantly improves,which are highly related to their H/C ratios.Detailed characterisations reveal that the difference of the pyrolysis performance can be ascribed to the content of aromatics and cycloalkanes:the former are prone to initiate secondary reactions to form coking precursors,while the latter could act as the hydrogen donor and release hydrogen,which will terminate the radical propagation reactions and suppress the coke deposition.This work should provide the guidance for upgrading EHFs by modulating the composition of EHFs.
基金supported by the National Key R&D Program of China(2023YFD1701504)the 2115 Talent Development Program of China Agricultural University Fund(1011-00109018)the Beijing Innovation Team of the Modern Agricultural Research System(BAIC08-2023-FQ02)。
文摘Optimizing the intrinsic activity of non-noble metal by precisely tailoring electronic structure offers an appealing way to construct cost-effective catalysts for selective biomass valorization.Herein,we reported a P-doping bifunctional catalyst(Ni-P/mSiO_(2))that achieved 96.6%yield for the hydrogenation rearrangement of furfural to cyclopentanone at mild conditions(1 MPaH_(2),150°C).The turnover frequency of Ni-P/mSiO_(2)was 411.9 h^(-1),which was 3.2-fold than that of Ni/mSiO_(2)(127.2 h^(-1)).Detailed characterizations and differential charge density calculations revealed that the electron-deficient Niδ+species were generated by the electron transfer from Ni to P,which promoted the ring rearrangement reaction.Density functional theory calculations illustrated that the presence of P atoms endowed furfural tilted adsorb on the Ni surface by the C=O group and facilitated the desorption of cyclopentanone.This work unraveled the connection between the localized electronic structures and the catalytic properties,so as to provide a promising reference for designing advanced catalysts for biomass valorization.
基金supported by the National Natural Science Foundation of China(22138009)the Fundamental Research Funds for the Central Universities of China。
文摘The metal promoted In_(2)O_(3) catalysts for CO_(2) hydrogenation to methanol have attracted wide attention because of their high activity with high methanol selectivity.However,there was still no experimental confirmation if copper could be a good promoter for In_(2)O_(3).Herein,the Cu promoted In_(2)O_(3) catalyst was prepared using a deposition-precipitation method.Such prepared Cu/In_(2)O_(3) catalyst shows significantly higher CO_(2) conversion and space time yield(STY)of methanol,compared to the un-promoted In_(2)O_(3) catalyst.The loading of Cu facilitates the activation of both H_(2) and CO_(2) with the interface between the Cu cluster and defective In_(2)O_(3) as the active site.The Cu/In_(2)O_(3) catalyst takes the CO hydrogenation pathway for methanol synthesis from CO_(2) hydrogenation.It exhibits a unique size effect on the CO adsorption.At temperatures below 250℃,CO adsorption on Cu/In_(2)O_(3) is stronger than that on In_(2)O_(3),causing higher methanol selectivity.With increasing temperatu res,the Cu catalyst aggregates,which leads to the formation of weak CO adsorption site and causes a decrease in the methanol selectivity.Compared with other metal promoted In_(2)O_(3) catalysts,it can be concluded that the catalyst with stronger CO adsorption possesses higher methanol selectivity.
文摘Catalysts with varying Fe contents were prepared using a sequential impregnation method to investigate the effects of Fe addition on the physicochemical properties of Pt/Al_(2)O_(3) and their performance in methylcyclohexane(MCH)dehydrogenation.The results demonstrated that the addition of Fe to Pt/Al_(2)O_(3) enhanced the electron density of Pt and improved catalytic activity,while exhibiting negligible influence on the catalytic selectivity for toluene.When the Fe content was 0.057%,the catalyst exhibited the highest MCH consumption rate,which was approximately two times higher than that of the catalyst without Fe.Additionally,the incorporation of Fe inhibited the formation of coke and reduced the quantity of coke deposits on the catalyst,thereby improving its catalytic durability.Overall,Fe shows promise as a prospective secondary element for Pt/Al_(2)O_(3) to enhance the MCH dehydrogenation performance.
基金supported by the Research Intensified Grant Scheme (RIGS) under grant number VOT 55440 provided by Universiti Malaysia Terengganu (UMT)the SIPP Incentive sponsored by UMT
文摘For the first time,the MgH_(2)–NaAlH_(4)(ratio 4:1)destabilized system with CoTiO_(3) addition has been explored.The CoTiO_(3)-doped MgH_(2)–NaAlH_(4) sample begins to dehydrogenate at 130℃,which is declined by 40℃ compared to the undoped MgH_(2)–NaAlH_(4).Moreover,the de/rehydrogenation kinetics characteristics of the CoTiO_(3)-doped MgH_(2)–NaAlH_(4) were greatly ameliorated.With the inclusion of CoTiO_(3),the MgH_(2)–NaAlH_(4) composite absorbed 5.2 wt.%H_(2),higher than undoped MgH_(2)–NaAlH_(4).In the context of dehydrogenation,the CoTiO_(3)-doped MgH_(2)–NaAlH_(4) sample desorbed 2.6 wt.%H_(2),almost doubled compared to the amount of hydrogen desorbed from the undoped MgH_(2)–NaAlH_(4) sample.The activation energy obtained by the Kissinger analysis for MgH_(2) decomposition was significantly lower by 35.9 kJ/mol than the undoped MgH_(2)–NaAlH_(4) sample.The reaction mechanism demonstrated that new phases of MgCo and AlTi_(3) were generated in situ during the heating process and are likely to play a substantial catalytic function and be useful in ameliorating the de/rehydrogenation properties of the destabilized MgH_(2)–NaAlH_(4) system with the inclusion of CoTiO_(3).
基金support by the National Natural Science Foundation of China under Grant No.U20A20237 and the High Performance Computing Center of Central South University are gratefully acknowledged.
文摘Magnesium hydride is one of the most promising solid-state hydrogen storage materials for on-board application.Hydrogen desorption from MgH_(2) is accompanied by the formation of the Mg/MgH_(2) interfaces,which may play a key role in the further dehydrogenation process.In this work,first-principles calculations have been used to understand the dehydrogenation properties of the Mg(0001)/MgH_(2)(110) interface.It is found that the Mg(0001)/MgH_(2)(110) interface can weaken the Mg-H bond.The removal energies for hydrogen atoms in the interface zone are significantly lower compared to those of bulk MgH_(2).In terms of H mobility,hydrogen diffusion within the interface as well as into the Mg matrix is considered.The calculated energy barriers reveal that the migration of hydrogen atoms in the interface zone is easier than that in the bulk MgH_(2).Based on the hydrogen removal energies and diffusion barriers,we conclude that the formation of the Mg(0001)/MgH_(2)(110) interface facilitates the dehydrogenation process of magnesium hydride.
基金supported by National Key Research&Development Program of China(2021YFB3801600)Fundamental Research Funds for the Central University(buctrc201921,JD2223,12060093063)Innovative Achievement Commercialization Service-Platform of Industrial Catalysis(2019-00900-2-1).
文摘Alumina(Al_(2)O_(3))is widely used in the chemical industry as the catalyst and support due to its high specific surface area,abundant pore size distribution and chemical stability.However,the occurrence of hydration in water environment,result in outstanding decrease in specific surface area and collapse of pore structure.In this work,dodecyl phosphoric acid(PA)is used to modify the surface of Al_(2)O_(3)to obtain a series of hydrophobic material(Al_(2)O_(3)-PA).Based on XPS and NMR analysis,PA is chemically bonded on Al_(2)O_(3)to form PAOAAl bond.Furthermore,BET and WCA results display that Al_(2)O_(3)-1PA exhibits excellent the hydrophobicity and hydrothermal stability while maintains the pore structure.Take it as the substrate to support the Pd nanoparticles,the as-prepared Pd/Al_(2)O_(3)-PA shows the superior catalytic performance in the hydrogenation of phenol and anthraquinone relative to Pd/Al_(2)O_(3),indicating the accessibility of Pd sites after PA modification.Especially,the significantly enhanced stability is also obtained in four cycles for aqueous phenol hydrogenation.This can be ascribed that the PA modification inhibits the aggregation of Pd nanoparticles and the products adhesion in the reaction process.The extension of PA coatings to monolithic catalysts could expand their current capabilities in industrial applications and warrants ongoing investigation.
基金sponsored by the National Natural Science Foundation of China(21808120,21978148)。
文摘Cu-based catalysts are widely employed for CO_(2) hydrogenation to methanol,which is expected as a promising process to achieving carbon neutrality.However,most Cu-based catalysts still suffer from low methanol yield with a passable CO_(2) conversion and lack insight into its reaction mechanism for guiding the design of catalysts.In this work,Cu^(+)/CeZrO_(x) interfaces are engineered by employing a series of ceria-zirconia solid solution catalysts with various Ce/Zr ratios,forming a Cu^(+)-O_(v)-Ce^(3+)structure where Cu^(+)atoms are bonded to the oxygen vacancies(O_(v))of ceria.Compared to Cu/CeO_(2) and Cu/ZrO_(2),the optimized catalyst(i.e.,Cu_(0.3)Ce_(0.3)Zr_(0.7))exhibits a much higher mass-specific methanol formation rate(192g_(MeOH)/kg_(cat)/h)at 240℃and 3 MPa.Through a series of in-situ and ex-situ characterization,it is revealed that oxygen vacancies in solid solutions can effectively assist the activation of CO_(2) and tune the electronic state of copper to promote the formation of Cu^(+)/CeZrO_(x) interfaces,which stabilizes the key*CO intermediate,inhibits its desorption and facilitates its further hydrogenation to methanol via the reverse watergas-shift(RWGS)+CO-Hydro pathway.Therefore,the concentration of*CO or the apparent Cu^(+)/(Cu^(+)+Cu^(0))ratio could be employed as a quantitative descriptor of the methanol formation rate.This work is expected to give a deep insight into the mechanism of metal/support interfaces in CO_(2) hydrogenation to methanol,offering an effective strategy to develop new catalysts with high performance.
基金supported by the National Natural Science Foundation of China(21802138,21773234 and 22078315)the‘‘Transformational Technologies for Clean Energy and Demonstration’’,Strategic Priority Research Program of the Chinese Academy of Sciences(XDA 21090203)+3 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciences(2020189)the Natural Science Foundation of Liaoning Province(2022-MS-027)the Youth Science and Technology Star Project Support Program of Dalian City(2021RQ123),DICP(Grant:DICP I202138)the University of Chinese Academy of Sciences(UCAS)for UCAS Scholarship。
文摘CO_(2)hydrogenation has been considered to be a highly promising route for the production of high-value olefins(HVOs)while also mitigating CO_(2)emissions.However,it is challenging to achieve high selectivity and maintain stable performance for HVOs(ethylene,propylene,and linear a-olefins)over a prolonged reaction time due to the difficulty in precise control of carbon coupling and rapid catalyst deactivation.Herein,we present a selective Ba and Na co-modified Fe catalyst enriched with Fe_(5)C_(2)and Fe_(3)C active sites that can boost HVO synthesis with up to 66.1%selectivity at an average CO_(2)conversion of 38%for over 500 h.Compared to traditional NaFe catalyst,the combined effect of Ba and Na additives in the NaBaFe-0.5 catalyst suppressed excess oxidation of FeCxsites by H_(2)O.The absence of Fe3O4phase in the spent NaBaFe-0.5 catalyst reflects the stabilization effect of the co-modifiers on the FeCxsites.This study provides a strategy to design Fe-based catalysts that can be scaled up for the stable synthesis of HVOs from CO_(2)hydrogenation.
基金supported by the National Natural Science Foundation of China (21808035, 21901040)the Natural Science Foundation of Fujian Province (2019J05058, 2021J05216, 2022J01922)+3 种基金the Fujian Provincial Department of Finance (GY-Z220231)the fund of the State Key Laboratory of Catalysis in DICP (N-22-08)the Fujian Fishery Disaster Reduction Center (GY-H-22146)College Student Innovation and Entrepreneurship Training Program (x202110388068)。
文摘The electrochemical hydrogenation of HMF to BHMF is an elegant alternative to the conventio nal thermocatalytic route for the production of high-value-added chemicals from biomass resources.In virtue of the wide potential window with promising Faradic efficiency(FE) towards BHMF,Cu-based electrode has been in the center of investigation.However,its structure-activity relationship remains ambiguous and its intrinsic catalytic activity is still unsatisfactory.In this work,we develop a two-step oxidation-reduction strategy to reconstruct the surface atom arrangement of the Cu foam(CF).By combination of multiple quasi-situ/in-situ techniques and density functional theory(DFT) calculation,the critical factor that governs the reaction is demonstrated to be facet effect of the metallic Cu crystal:Cu(110) facet accounts for the most favorable surface with enhanced chemisorption with reactants and selective production of BHMF,while Cu(100) facet might trigger the accumulation of the by-product 5,5'-bis(hydroxy methy)hydrofurion(BHH).With the optimized composition of the facets on the reconstructed Cu(OH)_(2)-ER/CF,the performance could be noticeably enhanced with a BHMF FE of 92.3% and HMF conversion of 98.5% at a potential of -0.15 V versus reversible hydrogen electrode(vs.RHE) in 0.1 M KOH solution.This work sheds light on the incomplete mechanistic puzzle for Cu-catalyzed electrochemical hydrogenation of HMF to BHMF,and provides a theoretical foundation for further precise design of highly efficient catalytic electrodes.
基金the funding support from Shanghai Sailing Program (19YF1411000)National Natural Science Foundation of China (21878080, 21808058)Ningxia Science Foundation (2019AAC03282)。
文摘Production of light olefins from CO_(2), the primary greenhouse gases, is of great importance to mitigate the adverse effects of CO_(2) emission on environment and to supply the value-added products from nonpetroleum resource. However, development of robust catalyst with controllable selectivity and stability remains a challenge. Herein, we report that Zn-promoted Fe catalyst can boost the stable and selective production of light olefins from CO_(2). Specifically, the Zn-promoted Fe exhibits a highly stable activity and olefin selectivity over 200 h time-on-stream compared to the unpromoted Fe catalyst, primarily owing to the preservation of active χ-Fe_(5)C_(2) phase. Structural characterizations of the spent catalysts suggest that Zn substantially regulates the content of iron carbide on the surface and suppresses the reoxidation of bulk iron carbide during the reaction. DFT calculations confirm that adsorption of surface carbon atoms and graphene-like carbonaceous species are not thermochemically favored on Zn-promoted Fe catalyst. Carbon deposition by CAC coupling reactions of two surface carbon atoms and dehydrogenation of CH intermediate are also inhibited. Furthermore, the effects of Zn on antioxidation of iron carbide were also investigated. Zn favored the hydrogenation of surface adsorbed oxygen atoms to H_(2)O and the desorption of H_(2)O, which reduces the possibility of surface carbide being oxidized by the chemisorbed oxygen.
基金supported by National Natural Science Foundation of China(Nos.22108200,21938008 and 22121004)Natural Science Foundation of Zhejiang Province(LQ22B060013)the Haihe Laboratory of Sustainable Chemical Transformations for financial support。
文摘The interaction between a promoter and an active metal crucially impacts catalytic performance.Nowadays,the influence of promoter contents and species has been intensively considered.In this study,we investigate the effect of the iron(Fe)-zinc(Zn)proximity of Fe-Zn bimetallic catalysts on CO_(2)hydrogenation performance.To eliminate the size effect,Fe_(2)O_(3)and ZnO nanoparticles with uniform size are first prepared by the thermal decomposition method.By changing the loading sequence or mixing method,a series of Fe-Zn bimetallic catalysts with different Fe-Zn distances are obtained.Combined with a series of characterization techniques and catalytic performances,Fe-Zn bimetallic proximity for compositions of Fe species is discussed.Furthermore,we observe that a smaller Fe-Zn distance inhibits the reduction and carburization of the Fe species and facilitates the oxidation of carbides.Appropriate proximity of Fe and Zn(i.e.,Fe_1Zn_(1)-imp and Fe_(1)Zn_(1)-mix samples)results in a suitable ratio of the Fe_5C_(2)and Fe_(3)O_(4)phases,simultaneously promoting the reverse water-gas shift and Fischer-Tropsch synthesis reactions.This study provides insight into the proximity effect of bimetallic catalysts on CO_(2)hydrogenation performance.
基金financial support from the National Natural Science Foundation of China(22272016).
文摘The liquid phase selective hydrogenation of cinnamaldehyde has been investigated over the catalysts Co-C-T(T=400-700℃),which were derived from the carbonization of the MOF precursor Co-BTC at different temperatures in inert atmosphere.Co-C-500 exhibited a higher conversion(85.3%)than those carbonized at other temperatures,with 51.5%selectivity to cinnamyl alcohol,under a mild condition(90℃,4 h,2 MPa H_(2),solvent:9 ml ethanol and 1 ml water).The high catalytic activity of Co-C-500 can be ascribed to the large specific surface area of the catalyst,the uniformly dispersed metallic cobalt nanoparticles,and the more defect sites on the carbon support.Moreover,Co-C-500 showed excellent reusability in 5 successive cycles,mainly related to the uniformly dispersed cobalt nanoparticles embedded in carbon support.
基金Financial supports from the State Key Laboratory of Catalytic Materials and Reaction Engineering (RIPP, SINOPEC)。
文摘The promoting effect of zirconium addition on Pd/Beta catalysts has been investigated in the selective hydrogenation of phenol to cyclohexanone in the aqueous phase. The activity of the catalyst in the reaction was greatly improved by introducing Zr atoms into the framework of H-Beta zeolite. An important synergy between the Zr species and Pd, affecting the Pd dispersion state on the support, has been observed. The modification of the support with Zr^(4+) improves the Lewis/Brφnsted acid ratio of the catalyst, suppressing the further transformation of cyclohexanone. The kinetics of Pd/Zr-Beta catalyst showed high selectivity to cyclohexanone. The catalytic results showed that the Pd/Zr-Beta had the best catalytic performance at the desired temperature of 80℃ for 5 h.
基金financially supported by the National Natural Science Foundation of China(22078292,22008212,U20A20119,21776258)。
文摘The overall performance of metal catalysts can be efficiently adjusted by modifying carbon carriers with different valence sulfur precursors.The wet impregnation technique successfully prepared carbon material carriers doped with varying sources of sulfur(Na_(2)SO_(4),NaHSO_(3),Na_(2)S·9H_(2)O).Palladium carbon catalysts doped with different sulfur precursors had been prepared with the aid of the liquid-phase reduction method of the selective hydrogenation of o-chloronitrobenzene(o-CNB)to o-chloroaniline(o-CAN).The catalyst prepared for Na_(2)S·9H_(2)O as a precursor has excellent performance,and the selectivity for o-CAN is more than 99.9%at 100%conversion.In addition,the characterization results show that with the decrease of S valence,the electronic effect between S and Pd increases,and the outer electron shift of Pd increases,which reduces the adsorption and dissociation ability of Pd to hydrogen,resulting in excellent selectivity.The effects provided a good idea for the hydrogenation of o-CNB and a different point of view on sulfur doping in a variety of hydrogenation reactions.
基金financially supported by the National Natural Science Foundation of China (22008166)Natural Science Foundation of Shanxi (201901D211047)Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (2019L0185)。
文摘Doping heteroatoms on carbon materials could bring some special advantages for using as catalyst support.In this work, a boron doped lamellar porous carbon(B-LPC) was prepared facilely and utilized as carbonbased support to construct Cu/B-LPC catalyst for dimethyl oxalate(DMO) hydrogenation. Doping boron could make the B-LPC own more defects on surface and bigger pore size than B-free LPC, which were beneficial to disperse and anchor Cu nanoparticles. Moreover, the interaction between Cu species and B-LPC could be strengthened by the doped B, which not only stabilized the Cu nanoparticles, but also tuned the valence of Cu species to maintain more Cu^(+). Therefore, the B-doped Cu/B-LPC catalyst exhibited stronger hydrogenation ability and obtained higher alcohols selectivity than Cu/LPC, as well as high stability without decrease of DMO conversion and ethylene glycol selectivity even after 300 h of reaction at 240℃.
基金supported by the National Key Research and Development Program of China (2018YFA0704502)Haihe Laboratory of Sustainable Chemical Transformations (CYZC202101)。
文摘Selective hydrogenation of hydroxyaldehydes to polyalcohols is challenging due to the competitive hydrogenation of C=O and CAO.This study develops heterogeneous Cu catalysts for the selective synthesis of ethylene glycol via batch liquid-phase hydrogenation of glycolaldehyde.SiO_(2)supported Cu,fabricated by ammonia evaporation,enables to catalyze the C=O bond hydrogenation with retaining the CAO bond intact,yielding higher selective hydrogenation activity with ethylene glycol selectivity up to 99.8%relative to MgO,Al_(2)O_(3),CeO_(2),and TiO_(2)supports and Cu/SiO_(2)synthesized by deposition–precipitation and impregnation.Characterizations confirm that highly efficient 20Cu/SiO_(2)-AE-623 K catalyst fabricated by ammonia evaporation is featured with larger Cu^(0)and Cu^(+)surface areas,of which the Cu^(+)species created from reducing copper phyllosilicate exhibit higher reactivity.A synergistic effect between Cu^(+)and Cu^(0)facilitates the selective adsorption/activation of glycolaldehyde on Cu^(+)sites and the dissociation of H_(2)on Cu^(0)sites,bringing a remarkable improvement in the selective hydrogenation performance.
基金supported by National Key Research&Development Program of China (2022YFA1506200)the National Natural Science Foundations of China (22078007, 21627813, 21706009,22002085)+3 种基金Guangdong Basic and Applied Basic Research Foundation (2020A1515110832)the Fundamental Research Funds for the Central Universities (buctrc201921, JD2223)Innovative Achievement Commercialization Service-Platform of Industrial CatalysisChemistry and Chemical Engineering Guangdong Laboratory for a startup funding support(2111001)
文摘Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core–shell and PdAg alloy structure with controlled size and surface compositions were prepared to demonstrate synergetic mechanisms,particularly,ligand and strain effects on activity and ethylene selectivity for acetylene hydrogenation.The performance evaluation indicates that Ag@Pd catalysts with well-controlled Pd-shell thickness can effectively lower apparent activation energy and improve ethylene selectivity.Hydrogenation activity increases from 0.019 to 0.062 s^(-1) with decreasing Pd-shell thickness under mild conditions,which is 3–6 times higher than their alloyed and monometallic counterparts.Combined characterizations and density functional theory are conducted to reveal such shell-thickness-dependent performance.The ligand effect arising from Ag alloying in the interface of Ag@Pd2ML observes the strongest binding of acetylene,but it diminished sharply and the strain effect gets more prevailing with increasing shell thickness.The competition of ethylene desorption and deephydrogenation were also investigated to understand the selectivity governing factors,and the selectivity descriptor(0.5BE(C_(2)H_(4))–BE(H))was built to match the contribution of ligand and strain effect on the different surfaces of Pd-Ag bimetallic NPs.The exploration of synergetic mechanisms among bimetallic NPs with varied structure and surface compositions in this work can help us to deepen the understanding catalyst structure–activity relationship and provide a feasible way to optimize the overall catalytic performance.
基金financially supported by National Natural Science Foundation of China (22008166)Natural Science Foundation of Shanxi (201901D211047)Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (2019L0185)。
文摘Dimethyl oxalate(DMO) hydrogenation is a crucial step in the coal to ethylene glycol(CTEG) process.Herein, Cu catalyst supported on fibrous mesoporous silica(Cu/FMS) was synthesized via liquid phase deposition technique and applied for the DMO hydrogenation to EG. The catalyst exhibited a remarkable EG selectivity of 96.95% and maintained its activity without deactivation for 1000 h. Fibers of FMS support and liquid phase deposition technology cooperated to give high dispersion of Cu species in the Cu/FMS catalyst, resulting in a high Cu surface area. The formation of Si—O—Cu during catalyst preparation process increased the Cu^(+)/(Cu^(0)+ Cu^(+)) ratio and enhanced the thermal and valence stability of Cu species.The high Cu^(+) surface area and Cu stability(thermal and valence stability) of the Cu/FMS catalyst were key factors for achieving superior EG selectivity and ultra-high stability.