Injecting water into the main pipeline is a common method to prevent the ammonium salt corrosion in hydrogenation units.The use of spray nozzle can enhance the effects of washing ammonium salt and reduce the risk of a...Injecting water into the main pipeline is a common method to prevent the ammonium salt corrosion in hydrogenation units.The use of spray nozzle can enhance the effects of washing ammonium salt and reduce the risk of ammonium salt corrosion.The droplet atomization and evaporation model were used to investigate the mixing process of injecting water and gas-oil mixture in a high-pressure environment.The effects of some key parameters including fluid velocity,temperature,and droplet volume fraction on the mixing and vaporization process were analyzed.Numerical simulation results show that with the increase of injecting water flow rate,the fluid velocity increases and the temperature decreases continuously.When the mass flow rate of injecting water is 1.5 t/h,the droplet has the maximum evaporation efficiency and the volume fraction reaches a minimum value.Besides,with the increase of atomization angle and droplet size,the mean velocity and the temperature of fluid decrease continuously.The increase of atomization angle or the decrease of droplet size will accelerate the evaporation process of droplets and reduce the droplet volume fraction,which indicates that the droplet slip velocity and the contact area are the key factors affecting the droplet evaporation rate.展开更多
Two new coordination polymers,[ZnL1]n(1,H2L1 = 5-(4-pyridyl)-methoxyl isophthalic acid) and[Ni(L2)2(H2O)4]n(2,HL2 = 4-(pyridin-4-ylmethoxy)benzolic acid),have been synthesized and characterized by elementa...Two new coordination polymers,[ZnL1]n(1,H2L1 = 5-(4-pyridyl)-methoxyl isophthalic acid) and[Ni(L2)2(H2O)4]n(2,HL2 = 4-(pyridin-4-ylmethoxy)benzolic acid),have been synthesized and characterized by elemental analysis,PXRD,IR spectra,and single-crystal X-ray diffraction.Compound 1 has a three-dimensional framework constructed by 6-bridged L1^2- anions connecting the Zn2(O2C)4 paddlewheel-like units.Compound 2 contains a mononuclear molecular unit,and the central nickel atom adopts a slightly distorted octahedral geometry by two nitrogen atoms from different L2^- ligands and four oxygen atoms from water molecules.These molecular units link each other via four types of O-H…O hydrogen bonds to form an extended three-dimensional(3D) supramolecular network.The thermal and photoluminescent properties of 1 and 2 have also been investigated.展开更多
Novel linear supramolecular polymers were successfully constructed by self-assemblies of coumarinbridged bifunctional UPy derivative.Benefitting from the photodimerization ability of the coumarin moieties,the linear s...Novel linear supramolecular polymers were successfully constructed by self-assemblies of coumarinbridged bifunctional UPy derivative.Benefitting from the photodimerization ability of the coumarin moieties,the linear supramolecular polymers could form the large three-dimensional polymer networks upon UV light irradiation via photo-cross-linking,which provides a viable and alternative procedure to modulate the properties of supramolecular polymers.展开更多
基金The authors acknowledge supports from the National Natural Science Foundation of China(Grant No.51806198,No.U1909216,No.52176048,No.51876194)the Zhejiang Provincial Natural Science Foundation(Grant No.LY21E060011)the Fundamental Research Funds of Zhejiang Sci-Tech University(Grant No.2021Q020).
文摘Injecting water into the main pipeline is a common method to prevent the ammonium salt corrosion in hydrogenation units.The use of spray nozzle can enhance the effects of washing ammonium salt and reduce the risk of ammonium salt corrosion.The droplet atomization and evaporation model were used to investigate the mixing process of injecting water and gas-oil mixture in a high-pressure environment.The effects of some key parameters including fluid velocity,temperature,and droplet volume fraction on the mixing and vaporization process were analyzed.Numerical simulation results show that with the increase of injecting water flow rate,the fluid velocity increases and the temperature decreases continuously.When the mass flow rate of injecting water is 1.5 t/h,the droplet has the maximum evaporation efficiency and the volume fraction reaches a minimum value.Besides,with the increase of atomization angle and droplet size,the mean velocity and the temperature of fluid decrease continuously.The increase of atomization angle or the decrease of droplet size will accelerate the evaporation process of droplets and reduce the droplet volume fraction,which indicates that the droplet slip velocity and the contact area are the key factors affecting the droplet evaporation rate.
基金Supported by the National Natural Science Foundation of China(No.21301035)
文摘Two new coordination polymers,[ZnL1]n(1,H2L1 = 5-(4-pyridyl)-methoxyl isophthalic acid) and[Ni(L2)2(H2O)4]n(2,HL2 = 4-(pyridin-4-ylmethoxy)benzolic acid),have been synthesized and characterized by elemental analysis,PXRD,IR spectra,and single-crystal X-ray diffraction.Compound 1 has a three-dimensional framework constructed by 6-bridged L1^2- anions connecting the Zn2(O2C)4 paddlewheel-like units.Compound 2 contains a mononuclear molecular unit,and the central nickel atom adopts a slightly distorted octahedral geometry by two nitrogen atoms from different L2^- ligands and four oxygen atoms from water molecules.These molecular units link each other via four types of O-H…O hydrogen bonds to form an extended three-dimensional(3D) supramolecular network.The thermal and photoluminescent properties of 1 and 2 have also been investigated.
基金sponsored by National Natural Science Foundation of China(Nos.21602112 and 21472088)supported by Scientific Starting Fund from Nanjing University of Posts and Telecommunications(NUPTSF)(No.NY215057)
文摘Novel linear supramolecular polymers were successfully constructed by self-assemblies of coumarinbridged bifunctional UPy derivative.Benefitting from the photodimerization ability of the coumarin moieties,the linear supramolecular polymers could form the large three-dimensional polymer networks upon UV light irradiation via photo-cross-linking,which provides a viable and alternative procedure to modulate the properties of supramolecular polymers.