Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis d...Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis diffusion reflectance spectroscopy.The results indicate that all the prepared samples have the same hexagonal wurtzite phase and exhibit good size uniformity and regularity.Degradation of rhodamine-B（RhB） was used to evaluate the photocatalytic activities of ZnxCd1-xS samples.Zn0.4Cd0.6S possessed the best photocatalytic activity and exhibited high stability during the reaction.展开更多
A novel 3D MCP,[Co;（μ;-OH）(btc)（bmip）];(1,H;btc=1,3,5-benzenetricarboxylate acid,bmip=1,3-bis（2-methylimidazolyl）propane),was synthesized under hydrothermal conditions and characterized by single-crystal X-ray ...A novel 3D MCP,[Co;（μ;-OH）(btc)（bmip）];(1,H;btc=1,3,5-benzenetricarboxylate acid,bmip=1,3-bis（2-methylimidazolyl）propane),was synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction,powder XRD,FT-IR,TGA and elemental analysis techniques.MCP 1 features a 3D framework based on tetranuclear Co（Ⅱ）clusters where the four cobalt ions are coplanar,and shows an unusual binodal（3,10）-connected topology.Furthermore,the photocatalytic experiment result indicates the degradation ratios of rhodamine B（RhB）reach 78.2%when MCP 1 acts as catalyst.展开更多
The perovskite-type AgTaO3 crystals were prepared by mild hydrothermal method and determined by powder X-ray diffraction. Rietveld refinement indicates that AgTaO3 crystallized in an orthorhombic system with the space...The perovskite-type AgTaO3 crystals were prepared by mild hydrothermal method and determined by powder X-ray diffraction. Rietveld refinement indicates that AgTaO3 crystallized in an orthorhombic system with the space group Pcmn. The lattice parameters are a=5.5822（1） nm, b=7.8522（2） nm and c=5.5347（1） nm, with α=β=γ= 90.0o. The compound was characterized by scanning electron microscopy（SEM）, X-ray photoelectron spectroscopy （XPS）, high resolution transmission electron microscopy（HR-TEM） and UV-Vis diffuse reflectance spectrometry （UV-Vis DRS）. The photocatalytic activity of AgTaO3 powder was evaluated by the degradation of Congo red under UV-light irradiation. The result shows that the titled compound has a high photocatalytic activity at room temperature and potential application in photocatalysis.展开更多
SnS2 nanoflakes were successfully synthesized via a simple hydrothermal process. The as-prepared SnS2 samples were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, nitrogen adsorption-de...SnS2 nanoflakes were successfully synthesized via a simple hydrothermal process. The as-prepared SnS2 samples were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, nitrogen adsorption-desorption isotherms, and UV-vis diffuse reflectance spectroscopy（DRS）. The photocatalytic activities of the as-prepared SnS2 nanoflakes under visible light irradiation（λ〉420 nm） were evaluated by the degradation of rhodamine B（Rh B）. The effect of hydrothermal temperatures on the photocatalytic efficiency of as-prepared SnS2 nanoflakes was investigated. The experimental result showed that SnS2 nanoflakes synthesized at the temprature of 160 o had higher photocatalytic efficiency and good photocatalytic stability.展开更多
High purity anatase nano-TiO2 powders with high photocatalytic activity were prepared by a hydrothermal synthesis method. X-ray diffraction （XRD）, field emission transmission electron microscopy （FETEM）, ultraviol...High purity anatase nano-TiO2 powders with high photocatalytic activity were prepared by a hydrothermal synthesis method. X-ray diffraction （XRD）, field emission transmission electron microscopy （FETEM）, ultraviolet-visible （UV-Vis） light absorption spectrum and photoluminescence （PL） spectrum were adopted to characterize the catalyst. Effects of temperature, time and sol concentration of hydrothermal synthesis on particle size and phases were investigated. Photocatalytic activities in the degradation of Rhodamine B Dye were studied. The experimental results indicated that photocatalytic activity of the nano-TiO2 powers was much higher than that of P25 （Degussa）.展开更多
A novel organic-inorganic hybrid compound constructed from mixed ligands, Co3（SIP）2（bipy）4（H2O）6·6.5H2O （H3SIP = 5-sulfoisophthalic acid, bipy = 4,4′-bipyridyl）, has been hydrothermally synthesized and c...A novel organic-inorganic hybrid compound constructed from mixed ligands, Co3（SIP）2（bipy）4（H2O）6·6.5H2O （H3SIP = 5-sulfoisophthalic acid, bipy = 4,4′-bipyridyl）, has been hydrothermally synthesized and characterized by IR, TGA and single-crystal X-ray diffraction. The crystal belongs to orthorhombic, space group P212121 with a = 11.395（2）, b = 19.395（4）, c = 30.675（6） A^°, Mr = 1513.05, V= 6779（2） A^°^3, Dc= 1.482 g/cm^3, F（000） = 3120, μ = 0.873 mm^-1, Z= 4, the final R = 0.0439 and wR = 0.119 for 13421 observed reflections with I〉 2σ（I）. The structure of the compound presents a 3-D framework containing Co-bipy 1-D chain and 2-D bilayer motifs and carboxylate spacers, and the connection of 1-D chain and 2-D bilayer motifs by carboxylate ligand results in the final open framework with twofold interpenetration net. A probe reaction of the oxidation of benzaldehyde with H2O2 using the title compound as catalyst was carded out in a liquid-solid system, showing that the compound has high oxidative catalytic activity to the reaction.展开更多
A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and charact...A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and characterized by single-crystal and powder X-ray diffraction, IR spectra, thermogravimetric analyses and elemental analyses. The single-crystal X-ray diffraction reveals that metal coordination polymer 1(MCP 1) shows a two-dimensional sheet layer structure, which is further reinforced through strong intermolecular hydrogen bonding to form a 3 D supramolecular framework. Furthermore, the photocatalytic experiment result indicates the degradation ratios of methyl orange(MO) reach 83.4% within 180 minutes when MCP 1 acts as catalyst.展开更多
SrTiO3 nanoparticle (NP) photocatalyst was synthesized with a facile and environmentalfriendly hydrothermal method using tetrabutyltitanate,strontium oxide,and ethanolamine as precursors at low temperature without alk...SrTiO3 nanoparticle (NP) photocatalyst was synthesized with a facile and environmentalfriendly hydrothermal method using tetrabutyltitanate,strontium oxide,and ethanolamine as precursors at low temperature without alkali as mineralizer for the first time.The SrTiO3 nanoparticles were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM),field emission scanning electron microscopy (FESEM),and N2 Brunauer-Emmett-Teller (BET) method.The SrTiO3 catalyst synthesized at 120 ℃ (STO-120) exhibited the highest photocurrent intensity among the samples synthesized at different hydrothermal temperatures.The high photocatalytic performance of STO-120 was mainly attributed to the more homogeneous and minimum nanoparticle size,the highest surface area,and the maximum light absorption property among the four different samples.This work presented an applicable and facile method to fabricate a highly active and stable SrTiO3 photocatalyst for organic pollutant degradation.展开更多
TiO2-loaded activated carbon fibers （ACF） were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Fourier transform infrared （FTIR...TiO2-loaded activated carbon fibers （ACF） were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Fourier transform infrared （FTIR） spectrometry and UV-vis diffuse reflectance spectra （DRS）. SEM images showed that the TiO2 nanoparticles were deposited on the surface of ACF, and the particle size and loading amount of TiO2 were varied by changing the initial concentration of tetrabutyl titanate （TBOT）. The results of an ash experiment showed that the loading amounts of TiO2 were 18.4%, 43.3%, 52.5%, 75.1%, and 91.1% for initial concentrations of TBOT of 0.07,014, 0.21,0.28, and 0.35 tool/L, respectively, Physical interactions played an important role in the formation of TiO2/ACF composite fibers that absorb UV and visible light. Compared with those of ACF, improved adsorption and photocatalytic activity toward Rhodamine B （RhB） were observed for TiO2/ACF composite fiber. The Rhodamine B could be removed efficiently by TiO2/ACF composite fibers, and the TiO2 loading amount had a significant effect on the photocatalytic activity of TiO2/ACF composite fibers.展开更多
基金Project (20776016) supported by the National Natural Science Foundation of ChinaProject (20876109) supported by Program for New Century Excellent Talents in University of China
文摘Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis diffusion reflectance spectroscopy.The results indicate that all the prepared samples have the same hexagonal wurtzite phase and exhibit good size uniformity and regularity.Degradation of rhodamine-B（RhB） was used to evaluate the photocatalytic activities of ZnxCd1-xS samples.Zn0.4Cd0.6S possessed the best photocatalytic activity and exhibited high stability during the reaction.
基金Supported by the National Natural Science Foundation of China(No.21373132,21603133)Key scientific research project of education department of Shaanxi province(17JS027)the Science Foundation of Shaanxi University of Technology(No.SLGQD2017-14)
文摘A novel 3D MCP,[Co;（μ;-OH）(btc)（bmip）];(1,H;btc=1,3,5-benzenetricarboxylate acid,bmip=1,3-bis（2-methylimidazolyl）propane),was synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction,powder XRD,FT-IR,TGA and elemental analysis techniques.MCP 1 features a 3D framework based on tetranuclear Co（Ⅱ）clusters where the four cobalt ions are coplanar,and shows an unusual binodal（3,10）-connected topology.Furthermore,the photocatalytic experiment result indicates the degradation ratios of rhodamine B（RhB）reach 78.2%when MCP 1 acts as catalyst.
基金Supported by the Science and Technology Development Planning of Jilin Province, China(Nos.20100116, 201105005)the Specialized Research Fund for the Doctoral Program(SRFDP) of Higher Education of China(No.20100061120089)+1 种基金the Open Project of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry of China (No.2011-01)the Open Project of State Key Laboratory of Superhard Materials of China(No.2011-04)
文摘The perovskite-type AgTaO3 crystals were prepared by mild hydrothermal method and determined by powder X-ray diffraction. Rietveld refinement indicates that AgTaO3 crystallized in an orthorhombic system with the space group Pcmn. The lattice parameters are a=5.5822（1） nm, b=7.8522（2） nm and c=5.5347（1） nm, with α=β=γ= 90.0o. The compound was characterized by scanning electron microscopy（SEM）, X-ray photoelectron spectroscopy （XPS）, high resolution transmission electron microscopy（HR-TEM） and UV-Vis diffuse reflectance spectrometry （UV-Vis DRS）. The photocatalytic activity of AgTaO3 powder was evaluated by the degradation of Congo red under UV-light irradiation. The result shows that the titled compound has a high photocatalytic activity at room temperature and potential application in photocatalysis.
基金Funded by the National Natural Science Foundation of China(No.U1304520)the Education Department of Henan Province(2013GGJS-185)
文摘SnS2 nanoflakes were successfully synthesized via a simple hydrothermal process. The as-prepared SnS2 samples were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, nitrogen adsorption-desorption isotherms, and UV-vis diffuse reflectance spectroscopy（DRS）. The photocatalytic activities of the as-prepared SnS2 nanoflakes under visible light irradiation（λ〉420 nm） were evaluated by the degradation of rhodamine B（Rh B）. The effect of hydrothermal temperatures on the photocatalytic efficiency of as-prepared SnS2 nanoflakes was investigated. The experimental result showed that SnS2 nanoflakes synthesized at the temprature of 160 o had higher photocatalytic efficiency and good photocatalytic stability.
基金Funded by the Academic Leader Program of Wuhan City(201150530146)the Foundamental Research Funds for the Central Universities(2010-11-020)
文摘High purity anatase nano-TiO2 powders with high photocatalytic activity were prepared by a hydrothermal synthesis method. X-ray diffraction （XRD）, field emission transmission electron microscopy （FETEM）, ultraviolet-visible （UV-Vis） light absorption spectrum and photoluminescence （PL） spectrum were adopted to characterize the catalyst. Effects of temperature, time and sol concentration of hydrothermal synthesis on particle size and phases were investigated. Photocatalytic activities in the degradation of Rhodamine B Dye were studied. The experimental results indicated that photocatalytic activity of the nano-TiO2 powers was much higher than that of P25 （Degussa）.
基金Supported by the Natural Science Foundation of Fujian Province (2008 J0172)Innovate Project of Fujian Province (2007F3107)National Natural Science Foundation of China (20705031)
文摘A novel organic-inorganic hybrid compound constructed from mixed ligands, Co3（SIP）2（bipy）4（H2O）6·6.5H2O （H3SIP = 5-sulfoisophthalic acid, bipy = 4,4′-bipyridyl）, has been hydrothermally synthesized and characterized by IR, TGA and single-crystal X-ray diffraction. The crystal belongs to orthorhombic, space group P212121 with a = 11.395（2）, b = 19.395（4）, c = 30.675（6） A^°, Mr = 1513.05, V= 6779（2） A^°^3, Dc= 1.482 g/cm^3, F（000） = 3120, μ = 0.873 mm^-1, Z= 4, the final R = 0.0439 and wR = 0.119 for 13421 observed reflections with I〉 2σ（I）. The structure of the compound presents a 3-D framework containing Co-bipy 1-D chain and 2-D bilayer motifs and carboxylate spacers, and the connection of 1-D chain and 2-D bilayer motifs by carboxylate ligand results in the final open framework with twofold interpenetration net. A probe reaction of the oxidation of benzaldehyde with H2O2 using the title compound as catalyst was carded out in a liquid-solid system, showing that the compound has high oxidative catalytic activity to the reaction.
基金Supported by the team of syngas catalytic conversion of Shaanxi University of Technology,the National Natural Science Foundation of China(No.21373132,21603133)Key scientific research project of education department of Shaanxi province(18JS023)+1 种基金Shaanxi provincial science and technology department project(2018JM2043,2019JQ149,2019JM471)the Science Foundation of Shaanxi University of Technology(No.SLGQD2017-14)。
文摘A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and characterized by single-crystal and powder X-ray diffraction, IR spectra, thermogravimetric analyses and elemental analyses. The single-crystal X-ray diffraction reveals that metal coordination polymer 1(MCP 1) shows a two-dimensional sheet layer structure, which is further reinforced through strong intermolecular hydrogen bonding to form a 3 D supramolecular framework. Furthermore, the photocatalytic experiment result indicates the degradation ratios of methyl orange(MO) reach 83.4% within 180 minutes when MCP 1 acts as catalyst.
基金This work was financially supported by the National Natural Science Foundation of China，the Natural Science Foundation of Ningxia，the Research Project of Ningxia Colleges and Universities，the Research Project of Beifang University of Nationalities，the State Ethnic Affairs Commission Scientific Research Project of China
文摘SrTiO3 nanoparticle (NP) photocatalyst was synthesized with a facile and environmentalfriendly hydrothermal method using tetrabutyltitanate,strontium oxide,and ethanolamine as precursors at low temperature without alkali as mineralizer for the first time.The SrTiO3 nanoparticles were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM),field emission scanning electron microscopy (FESEM),and N2 Brunauer-Emmett-Teller (BET) method.The SrTiO3 catalyst synthesized at 120 ℃ (STO-120) exhibited the highest photocurrent intensity among the samples synthesized at different hydrothermal temperatures.The high photocatalytic performance of STO-120 was mainly attributed to the more homogeneous and minimum nanoparticle size,the highest surface area,and the maximum light absorption property among the four different samples.This work presented an applicable and facile method to fabricate a highly active and stable SrTiO3 photocatalyst for organic pollutant degradation.
基金financial support of the National Natural Science Foundation of China(No.21103017No.51104042)the Fundamental Research Funds for the Central Universities(No.110405007)
文摘TiO2-loaded activated carbon fibers （ACF） were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Fourier transform infrared （FTIR） spectrometry and UV-vis diffuse reflectance spectra （DRS）. SEM images showed that the TiO2 nanoparticles were deposited on the surface of ACF, and the particle size and loading amount of TiO2 were varied by changing the initial concentration of tetrabutyl titanate （TBOT）. The results of an ash experiment showed that the loading amounts of TiO2 were 18.4%, 43.3%, 52.5%, 75.1%, and 91.1% for initial concentrations of TBOT of 0.07,014, 0.21,0.28, and 0.35 tool/L, respectively, Physical interactions played an important role in the formation of TiO2/ACF composite fibers that absorb UV and visible light. Compared with those of ACF, improved adsorption and photocatalytic activity toward Rhodamine B （RhB） were observed for TiO2/ACF composite fiber. The Rhodamine B could be removed efficiently by TiO2/ACF composite fibers, and the TiO2 loading amount had a significant effect on the photocatalytic activity of TiO2/ACF composite fibers.
