Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have ...Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have been made,but there are some difficulties in calculating local flexibility in a cracked beam with complex crossing section,such as pipe and I-beam.In this paper,an analytical method to calculate the local flexibility and rotational spring stiffness due to crack in I-beam is proposed.The local flexibility with respect to various crack depths can be calculated by dividing a cracked I-beam into a series of thin rectangles.The forward and inverse problems in crack detection of I-beam are studied.The forward problem comprises the construction of crack model exclusively for crack section and the construction of a numerically I-beam model to gain crack detection database.The inverse problem consists of the measurement of modal parameters and the detection of crack parameters.Two experiments including measurement of rotational spring stiffness and prediction of cracks in I-beam are conducted.Experimental results based on the current methods indicate that relative error of crack location is less than 3%,while the error of crack depth identification is less than 6%.Crack identification of I-beam is expected to contribute to the development of automated crack detection techniques for railway lines and building skeletons.展开更多
In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this s...In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this study,18 glulam specimens were fabricated using larch dimension lumber and resorcinol-formaldehyde resin.Four-point bending tests were carried out to compare the ultimate bearing capacity,strain,and deflection of various specimens.The results showed that:(1)The typical failure mode at bending is the web shear failure parallel to grain.Before the failure,cracks and sounds appear at the beam web,which represent the sudden brittle failure.(2)The cross-sectional strain of glulam beam changed linearly with the beam height,indicating that the plane section assumption was basically established.(3)Stiffener could improve the initial flexural stiffness of glulam beam,which experiences an increase of 28.21%.Larger the shear span ratio,smaller the initial flexural stiffness.The initial flexural stiffness improves by 10-23.5%with the increase in the thickness of the lower flange.(4)The effects of stiffener and shear-span ratio on shear strength are relatively significant.After the stiffeners are set at the support and the loading point in pairs,the shear strength of the glulam beam increases by 15.05%averagely.With the increase in the shear-span ratio,the shearing strength of the glulam I-beam gradually reduces.The equation of the shearing strength with the shear span ratio is obtained,which is shown by high fitting precision.(5)The shear strength correlation,as proposed by Soltis and Rammer,is suitable not only for rectangular beams,but also for glulam I-beams.展开更多
Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperat...Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.展开更多
This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser...This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser Doppler Vibrometer manufactured by Polytec (3D-SLDV) and was used to acquire high resolution time-space Lamb waves that were propagating in the I-beam. A high power and pulsed Nd:YAG laser was used to emit the required Lamb waves. The emission and sensing of the waves were carried out simultaneously. The wave propagation data was recorded by scanning the surface of the I-beam in a sequential manner. The measured data was used to construct the wave patterns that were propagating in the I-beams at different time instants. Furthermore, as the waves in an I-Beam propagate with multiple modes even at low frequency range, filtering was carried out in the frequency-wavenum- ber domain in order to decompose the modes. The results presented thereby confirm that the new 3D-SLDV possesses tremendous capability in revealing the wave propagation characteristics and its interaction with defect. The results could be the first time that the waves propagating in a real I-beam can be visually observed, whilst in the past, it can only be visualized through simulation. The capability of using such totally laser-based 3D inspection system to reveal the characteristics of Lamb wave and its interaction with defects are substantial.展开更多
Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multipl...Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multiple design objectives. Genetic algorithm optimization (GAO) is a powerful search technique with faster convergence rates than traditional evolutionary algorithms. This paper applies two GAO-based approaches to multi-objective engineering design and finds design variables through the feasible space. To demonstrate the utility of the proposed methods, the multi-objective design of an I-beam will be presented.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 50805114)National Basic Research Program of China (973 Program,Grant No. 2011CB706805)
文摘Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have been made,but there are some difficulties in calculating local flexibility in a cracked beam with complex crossing section,such as pipe and I-beam.In this paper,an analytical method to calculate the local flexibility and rotational spring stiffness due to crack in I-beam is proposed.The local flexibility with respect to various crack depths can be calculated by dividing a cracked I-beam into a series of thin rectangles.The forward and inverse problems in crack detection of I-beam are studied.The forward problem comprises the construction of crack model exclusively for crack section and the construction of a numerically I-beam model to gain crack detection database.The inverse problem consists of the measurement of modal parameters and the detection of crack parameters.Two experiments including measurement of rotational spring stiffness and prediction of cracks in I-beam are conducted.Experimental results based on the current methods indicate that relative error of crack location is less than 3%,while the error of crack depth identification is less than 6%.Crack identification of I-beam is expected to contribute to the development of automated crack detection techniques for railway lines and building skeletons.
基金supported by the Natural Science Foundation of Jiang-su Province(Grant No.BK20181402)the National Natural Science Foundation of China(Grant No.51878354)+2 种基金a Project Funded by the National First-class Disciplines(PNFD)a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)a Project Funded by the Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing Forestry University(Nanjing,210037,China).
文摘In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this study,18 glulam specimens were fabricated using larch dimension lumber and resorcinol-formaldehyde resin.Four-point bending tests were carried out to compare the ultimate bearing capacity,strain,and deflection of various specimens.The results showed that:(1)The typical failure mode at bending is the web shear failure parallel to grain.Before the failure,cracks and sounds appear at the beam web,which represent the sudden brittle failure.(2)The cross-sectional strain of glulam beam changed linearly with the beam height,indicating that the plane section assumption was basically established.(3)Stiffener could improve the initial flexural stiffness of glulam beam,which experiences an increase of 28.21%.Larger the shear span ratio,smaller the initial flexural stiffness.The initial flexural stiffness improves by 10-23.5%with the increase in the thickness of the lower flange.(4)The effects of stiffener and shear-span ratio on shear strength are relatively significant.After the stiffeners are set at the support and the loading point in pairs,the shear strength of the glulam beam increases by 15.05%averagely.With the increase in the shear-span ratio,the shearing strength of the glulam I-beam gradually reduces.The equation of the shearing strength with the shear span ratio is obtained,which is shown by high fitting precision.(5)The shear strength correlation,as proposed by Soltis and Rammer,is suitable not only for rectangular beams,but also for glulam I-beams.
基金This research was supported by the National Natural Science Foundation of China （51171093）.
文摘Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.
文摘This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser Doppler Vibrometer manufactured by Polytec (3D-SLDV) and was used to acquire high resolution time-space Lamb waves that were propagating in the I-beam. A high power and pulsed Nd:YAG laser was used to emit the required Lamb waves. The emission and sensing of the waves were carried out simultaneously. The wave propagation data was recorded by scanning the surface of the I-beam in a sequential manner. The measured data was used to construct the wave patterns that were propagating in the I-beams at different time instants. Furthermore, as the waves in an I-Beam propagate with multiple modes even at low frequency range, filtering was carried out in the frequency-wavenum- ber domain in order to decompose the modes. The results presented thereby confirm that the new 3D-SLDV possesses tremendous capability in revealing the wave propagation characteristics and its interaction with defect. The results could be the first time that the waves propagating in a real I-beam can be visually observed, whilst in the past, it can only be visualized through simulation. The capability of using such totally laser-based 3D inspection system to reveal the characteristics of Lamb wave and its interaction with defects are substantial.
文摘Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multiple design objectives. Genetic algorithm optimization (GAO) is a powerful search technique with faster convergence rates than traditional evolutionary algorithms. This paper applies two GAO-based approaches to multi-objective engineering design and finds design variables through the feasible space. To demonstrate the utility of the proposed methods, the multi-objective design of an I-beam will be presented.
