Background: The stem curve of standing trees is an essential parameter for accurate estimation of stem volume.This study aims to directly quantify the occlusions within the single-scan terrestrial laser scanning(TLS) ...Background: The stem curve of standing trees is an essential parameter for accurate estimation of stem volume.This study aims to directly quantify the occlusions within the single-scan terrestrial laser scanning(TLS) data,evaluate its correlation with the accuracy of the retrieved stem curves, and subsequently, to assess the capacity of single-scan TLS to estimate stem curves.Methods: We proposed an index, occlusion rate, to quantify the occlusion level in TLS data. We then analyzed three influencing factors for the occlusion rate: the percentage of basal area near the scanning center, the scanning distance and the source of occlusions. Finally, we evaluated the effects of occlusions on stem curve estimates from single-scan TLS data.Results: The results showed that the correlations between the occlusion rate and the stem curve estimation accuracies were strong(r = 0.60–0.83), so was the correlations between the occlusion rate and its influencing factors(r = 0.84–0.99). It also showed that the occlusions from tree stems were the main factor of the low detection rate of stems, while the non-stem components mainly influenced the completeness of the retrieved stem curves.Conclusions: Our study demonstrates that the occlusions significantly affect the accuracy of stem curve retrieval from the single-scan TLS data in a typical-size(32 m × 32 m) forest plot. However, the single-scan mode has the capacity to accurately estimate the stem curve in a small forest plot(< 10 m × 10 m) or a plot with a lower occlusion rate, such as less than 35% in our tested datasets. The findings from this study are useful for guiding the practice of retrieving forest parameters using single-scan TLS data.展开更多
The /-V-（T） characteristic curves of p-n junctions with the forward voltage as the independent variable, the logarithm of forward current as the dependent variable, and the junction temperature as the parameter, alm...The /-V-（T） characteristic curves of p-n junctions with the forward voltage as the independent variable, the logarithm of forward current as the dependent variable, and the junction temperature as the parameter, almost converge at one point in the first quadrant. The voltage corresponding with the convergence point nearly equals the bandgap of the semiconductor material. This convergence point can be used to obtain the I-V characteristic curve at any temperature.展开更多
A highly distorted chiral nanographene structure composed of triple corannulene-fused[5]helicenes is prepared with the help of the Heck reaction and oxidative photocyclization with an overall isolated yield of 28%.The...A highly distorted chiral nanographene structure composed of triple corannulene-fused[5]helicenes is prepared with the help of the Heck reaction and oxidative photocyclization with an overall isolated yield of 28%.The complex three-dimensional(3D)structure of the bowl-helix hybrid nanostructure is studied by a combination of noncontact atomic force microscopy(AFM)and scanning tunneling microscopy(STM)on the Cu(111)surface,density functional theory calculations,AFM/STM simulations,and high-performance liquid chromatography-electronic circular dichroism analysis.This examination reveals a molecular structure in which the three bowl-shaped corannulene bladesd position themselves in a C3-symmetric fashion around a highly twisted triphenylene core.The molecule appears to be shaped like a propeller in which the concave side of the bowls face away from the connected[5]helicene motif.The chirality of the nanostructure is confirmed by the direct visualization of both MMM and PPP enantiomers at the single-molecule level by scanning probe microscopies.These results underline that submolecular resolution imaging by AFM/STM is a powerful real-space tool for the stereochemical characterization of 3D curved chiral nanographene structures.展开更多
A scanning electron probe is used to study the secondary emission properties of the im-pregnated barium scandate dispenser cathode, the influence of the activation on the secondary emis-sion property, the secondary em...A scanning electron probe is used to study the secondary emission properties of the im-pregnated barium scandate dispenser cathode, the influence of the activation on the secondary emis-sion property, the secondary emission image and the secondary emission distribution over the surfaceof the cathode. At optimal activation, δ<sub>m</sub>=3.56 (E<sub>pm</sub>=700eV). The activation has a larger effect onδ when the activation temperature is higher than 1100℃. The distribution over the surface of thecathode is non-uniform. The half-peak width of the distribution curve over the surface is 0.4. Theexperimental phenomena are discussed in relation to surface analysis of the cathode. The theoreticallyderived binomial distribution curves over the surface fit much better with the experimental results.展开更多
舌诊是中医望诊的重要手段,同时,温度与人体的健康息息相关。为了研究舌面的脏腑功能定位及舌象温度关系的反映,论文提出了一种红外技术的感兴趣区域(region of interest, ROI)模型研究方法。首先,利用葛立恒扫描法和Bezier曲线对多边形...舌诊是中医望诊的重要手段,同时,温度与人体的健康息息相关。为了研究舌面的脏腑功能定位及舌象温度关系的反映,论文提出了一种红外技术的感兴趣区域(region of interest, ROI)模型研究方法。首先,利用葛立恒扫描法和Bezier曲线对多边形ROI模型进行改进;然后,借助U-Net分割网络将提取出的温度信息进行训练与学习,从而做到批量处理舌体温度信息;最后,利用HSV色彩模型进行3D可视化,达成舌象温度分区的可视化研究。此外,为了验证该方法的准确性,实验还对模型截取出的舌体进行了评价指标验证,准确度可以达到0.991 1,分割效果极佳。研究表明:改进后的红外信息提取技术既能直观地观察到舌体的分区状况,也可以完整保留舌体的信息变化,为中医的数据化提供了完整可行性方案。实现了舌体红外信息数据的提取与中医诊断技术的有机结合。解决了中医一体化望诊的舌体信息完整性及准确性问题。展开更多
A charge density wave(CDW)ground state is observed in polycrystalline Cu_(2)Se below 125 K,which corresponds to an energy gap of 40.9 meV and an electron-phonon coupling constant of 0.6.Due to the polycrystalline stru...A charge density wave(CDW)ground state is observed in polycrystalline Cu_(2)Se below 125 K,which corresponds to an energy gap of 40.9 meV and an electron-phonon coupling constant of 0.6.Due to the polycrystalline structure,the Peierls transition process has been expanded to a wide temperature range from 90 K to 160 K.The Hall carrier concentration shows a continuous decrease from 2.1×10^(20)to 1.6×10^(20)cm^(-3)in the temperature range from 160 K to 90 K,while almost unchanged above 160 K and below 90 K.After entering the CDW ground state,a wave-like fluctuation was observed in theI-Vcurve near 50 K,which exhibits a periodic negative differential resistivity in an applied electric field due to the current.We also investigated the doping effect of Zn,Ni,and Te on the CDWground state.Both Zn and Ni doped Cu_(2)Se show a CDW character with increased energy gap and electron-phonon coupling constant,but no notable Peierls transition was observed in Te doped Cu_(2)Se.Similar wave-likeI-Vcurve was also seen in Cu_(1.98)Zn_(0.02)Se near 40 K.The regular fluctuation in the dcI-Vcurve was not magnetic field sensitive,but temperature and sample size sensitive.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.41671414,41971380,41331171 and 41171265)the National Key Research and Development Program of China(No.2016YFB0501404)
文摘Background: The stem curve of standing trees is an essential parameter for accurate estimation of stem volume.This study aims to directly quantify the occlusions within the single-scan terrestrial laser scanning(TLS) data,evaluate its correlation with the accuracy of the retrieved stem curves, and subsequently, to assess the capacity of single-scan TLS to estimate stem curves.Methods: We proposed an index, occlusion rate, to quantify the occlusion level in TLS data. We then analyzed three influencing factors for the occlusion rate: the percentage of basal area near the scanning center, the scanning distance and the source of occlusions. Finally, we evaluated the effects of occlusions on stem curve estimates from single-scan TLS data.Results: The results showed that the correlations between the occlusion rate and the stem curve estimation accuracies were strong(r = 0.60–0.83), so was the correlations between the occlusion rate and its influencing factors(r = 0.84–0.99). It also showed that the occlusions from tree stems were the main factor of the low detection rate of stems, while the non-stem components mainly influenced the completeness of the retrieved stem curves.Conclusions: Our study demonstrates that the occlusions significantly affect the accuracy of stem curve retrieval from the single-scan TLS data in a typical-size(32 m × 32 m) forest plot. However, the single-scan mode has the capacity to accurately estimate the stem curve in a small forest plot(< 10 m × 10 m) or a plot with a lower occlusion rate, such as less than 35% in our tested datasets. The findings from this study are useful for guiding the practice of retrieving forest parameters using single-scan TLS data.
文摘The /-V-（T） characteristic curves of p-n junctions with the forward voltage as the independent variable, the logarithm of forward current as the dependent variable, and the junction temperature as the parameter, almost converge at one point in the first quadrant. The voltage corresponding with the convergence point nearly equals the bandgap of the semiconductor material. This convergence point can be used to obtain the I-V characteristic curve at any temperature.
基金Financial support from the Ministry of Education Singapore under the AcRF Tier 1(MOE T1 RG11/21)and AcRF Tier 2(MOE-T2EP10221-0002)The Deutsche Forschungsgemeinschaft via grants(nos.SCHI 619/13 and EB535/1-1)+5 种基金the GRK(Research Training Group)2204“Substitute Materials for Sustainable Energy Technologies”the LOEWE Program of Excellence of the Federal State of Hesse(LOEWE Focus Group PriOSS“Principles of On-Surface Synthesis”)the National Natural Science Foundation of China(grant nos.21790053,51821002,and 22072103)the National Major State Basic Research Development Program of China(grant nos.2017YFA0205000 and 2017YFA0205002)the Collaborative Innovation Center of Suzhou Nano Science&Technologythe 111 Project are also acknowledged for their financial support.
文摘A highly distorted chiral nanographene structure composed of triple corannulene-fused[5]helicenes is prepared with the help of the Heck reaction and oxidative photocyclization with an overall isolated yield of 28%.The complex three-dimensional(3D)structure of the bowl-helix hybrid nanostructure is studied by a combination of noncontact atomic force microscopy(AFM)and scanning tunneling microscopy(STM)on the Cu(111)surface,density functional theory calculations,AFM/STM simulations,and high-performance liquid chromatography-electronic circular dichroism analysis.This examination reveals a molecular structure in which the three bowl-shaped corannulene bladesd position themselves in a C3-symmetric fashion around a highly twisted triphenylene core.The molecule appears to be shaped like a propeller in which the concave side of the bowls face away from the connected[5]helicene motif.The chirality of the nanostructure is confirmed by the direct visualization of both MMM and PPP enantiomers at the single-molecule level by scanning probe microscopies.These results underline that submolecular resolution imaging by AFM/STM is a powerful real-space tool for the stereochemical characterization of 3D curved chiral nanographene structures.
文摘A scanning electron probe is used to study the secondary emission properties of the im-pregnated barium scandate dispenser cathode, the influence of the activation on the secondary emis-sion property, the secondary emission image and the secondary emission distribution over the surfaceof the cathode. At optimal activation, δ<sub>m</sub>=3.56 (E<sub>pm</sub>=700eV). The activation has a larger effect onδ when the activation temperature is higher than 1100℃. The distribution over the surface of thecathode is non-uniform. The half-peak width of the distribution curve over the surface is 0.4. Theexperimental phenomena are discussed in relation to surface analysis of the cathode. The theoreticallyderived binomial distribution curves over the surface fit much better with the experimental results.
文摘舌诊是中医望诊的重要手段,同时,温度与人体的健康息息相关。为了研究舌面的脏腑功能定位及舌象温度关系的反映,论文提出了一种红外技术的感兴趣区域(region of interest, ROI)模型研究方法。首先,利用葛立恒扫描法和Bezier曲线对多边形ROI模型进行改进;然后,借助U-Net分割网络将提取出的温度信息进行训练与学习,从而做到批量处理舌体温度信息;最后,利用HSV色彩模型进行3D可视化,达成舌象温度分区的可视化研究。此外,为了验证该方法的准确性,实验还对模型截取出的舌体进行了评价指标验证,准确度可以达到0.991 1,分割效果极佳。研究表明:改进后的红外信息提取技术既能直观地观察到舌体的分区状况,也可以完整保留舌体的信息变化,为中医的数据化提供了完整可行性方案。实现了舌体红外信息数据的提取与中医诊断技术的有机结合。解决了中医一体化望诊的舌体信息完整性及准确性问题。
基金This work is supported by“Solid State Solar-Thermal Energy Conversion Center(S3TEC)”an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science,Office of Basic Energy Science under award number DE-SC0001299/DEFG02-09ER46577(Z.F.R.).C.O.wishes to thank Robert D.Farrell,S.J.for editing the MS and the Trustees of Boston College for their financial support.
文摘A charge density wave(CDW)ground state is observed in polycrystalline Cu_(2)Se below 125 K,which corresponds to an energy gap of 40.9 meV and an electron-phonon coupling constant of 0.6.Due to the polycrystalline structure,the Peierls transition process has been expanded to a wide temperature range from 90 K to 160 K.The Hall carrier concentration shows a continuous decrease from 2.1×10^(20)to 1.6×10^(20)cm^(-3)in the temperature range from 160 K to 90 K,while almost unchanged above 160 K and below 90 K.After entering the CDW ground state,a wave-like fluctuation was observed in theI-Vcurve near 50 K,which exhibits a periodic negative differential resistivity in an applied electric field due to the current.We also investigated the doping effect of Zn,Ni,and Te on the CDWground state.Both Zn and Ni doped Cu_(2)Se show a CDW character with increased energy gap and electron-phonon coupling constant,but no notable Peierls transition was observed in Te doped Cu_(2)Se.Similar wave-likeI-Vcurve was also seen in Cu_(1.98)Zn_(0.02)Se near 40 K.The regular fluctuation in the dcI-Vcurve was not magnetic field sensitive,but temperature and sample size sensitive.
