Fatigue failure is a common failure mode under the action of cyclic loads in engineering applications,which often occurs with no obvious signal.The maximum structural stress is far below the allowable stress when the ...Fatigue failure is a common failure mode under the action of cyclic loads in engineering applications,which often occurs with no obvious signal.The maximum structural stress is far below the allowable stress when the structures are damaged.Aiming at the lightweight structure,fatigue topology optimization design is investigated to avoid the occurrence of fatigue failure in the structural conceptual design beforehand.Firstly,the fatigue life is expressed by topology variables and the fatigue life filter function.The continuum fatigue optimization model is established with the independent continuous mapping(ICM)method.Secondly,fatigue life constraints are transformed to distortion energy constraints explicitly by taking advantage of the distortion energy theory.Thirdly,the optimization formulation is solved by the dual sequence quadratic programming(DSQP).And the design scheme of lightweight structure considering the fatigue characteristics is obtained.Finally,numerical examples illustrate the practicality and effectiveness of the fatigue optimization method.This method further expands the theoretical application of the ICM method and provides a novel approach for the fatigue optimization problem.展开更多
A new topology optimization method is formulated for lightweight design of multimaterial structures, using the independent continuous mapping (ICM) method to minimize the weight with a prescribed nodal displacement co...A new topology optimization method is formulated for lightweight design of multimaterial structures, using the independent continuous mapping (ICM) method to minimize the weight with a prescribed nodal displacement constraint. Two types of independent topological variable are used to identify the presence of elements and select the material for each phase, to realize the interpolations of the element stiffness matrix and total weight. Furthermore, an explicit expression for the optimized formulation is derived, using approximations of the displacement and weight given by first- and second-order Taylor expansions. The optimization problem is thereby transformed into a standard quadratic programming problem that can be solved using a sequential quadratic programming approach. The feasibility and effectiveness of the proposed multimaterial topology optimization method are demonstrated by determining the best load transfer path for four numerical examples. The results reveal that the topologically optimized configuration of the multimaterial structure varies with the material properties, load conditions, and constraint. Firstly, the weight of the optimized multimaterial structure is found to be lower than that composed of a single material. Secondly, under the precondition of a displacement constraint, the weight of the topologically optimized multimaterial structure decreases as the displacement constraint value is increased. Finally, the topologically optimized multimaterial structures differ depending on the elastic modulus of the materials. Besides, the established optimization formulation is more reliable and suitable for use in practical engineering applications with structural performance parameters as constraint.展开更多
The independent continuous mapping（ICM） method is integrated into element free Galerkin method and a new implementation of topology optimization for continuum structure is presented.To facilitate the enforcement of ...The independent continuous mapping（ICM） method is integrated into element free Galerkin method and a new implementation of topology optimization for continuum structure is presented.To facilitate the enforcement of the essential boundary condition and derivative of various sensitivities,a singular weight function in element free Galerkin method is introduced.Material point variable is defined to illustrate the condition of material point and its vicinity instead of element or node.The topological variables field is constructed by moving least square approximation which inherits the continuity and smoothness of the weight function.Due to reciprocal relationships between the topological variables and design variables,various structural responses sensitivities are derived according to the method for calculating the partial derivatives of compound functions.Numerical examples indicate that checkerboard pattern and mesh-dependence phenomena are overcome without additional restriction methods.展开更多
The present work introduces a novel concurrent optimization formulation to meet the requirements of lightweight design and various constraints simultaneously.Nodal displacement of macrostructure and effective thermal ...The present work introduces a novel concurrent optimization formulation to meet the requirements of lightweight design and various constraints simultaneously.Nodal displacement of macrostructure and effective thermal conductivity of microstructure are regarded as the constraint functions, which means taking into account both the loadcarrying capabilities and the thermal insulation properties.The effective properties of porous material derived from numerical homogenization are used for macrostructural analysis. Meanwhile, displacement vectors of macrostructures from original and adjoint load cases are used for sensitivity analysis of the microstructure. Design variables in the form of reciprocal functions of relative densities are introduced and used for linearization of the constraint function. The objective function of total mass is approximately expressed by the second order Taylor series expansion. Then, the proposed concurrent optimization problem is solved using a sequential quadratic programming algorithm, by splitting into a series of sub-problems in the form of the quadratic program. Finally, several numerical examples are presented to validate the effectiveness of the proposed optimization method. The various effects including initial designs, prescribed limits of nodal displacement, and effective thermal conductivity on optimized designs are also investigated. An amount of optimized macrostructures and their corresponding microstructures are achieved.展开更多
为了进一步研究连续体结构拓扑优化模型的合理性和可行性,基于独立、连续、映射(independent continuous mapping,ICM)方法,在满足结构位移约束的条件下,通过引入复合指数形式过滤函数对位移约束下质量最小化(minimum weight with a dis...为了进一步研究连续体结构拓扑优化模型的合理性和可行性,基于独立、连续、映射(independent continuous mapping,ICM)方法,在满足结构位移约束的条件下,通过引入复合指数形式过滤函数对位移约束下质量最小化(minimum weight with a displacement constraint,MWDC)模型进行了改进,建立了基于独立连续变量和复合指数函数的位移约束平面连续体结构拓扑优化模型,并进行了优化求解.同时,利用M语言,基于Matlab软件平台,开发了相应的拓扑优化计算程序,并针对4种典型平面连续体结构进行了数值验证,分别比较分析了体积约束下的柔顺度最小化(minimum compliance with a volume constraint,MCVC)模型、MWDC模型以及改进的MWDC模型所得到的最优拓扑结构.数值结果表明:采用复合指数形式过滤函数改进的MWDC优化模型迭代次数更少,优化求解计算效率更高.展开更多
基金This work was supported by the National Natural Science Foundation of China(11872080)Beijing Natural Science Foundation(3192005).
文摘Fatigue failure is a common failure mode under the action of cyclic loads in engineering applications,which often occurs with no obvious signal.The maximum structural stress is far below the allowable stress when the structures are damaged.Aiming at the lightweight structure,fatigue topology optimization design is investigated to avoid the occurrence of fatigue failure in the structural conceptual design beforehand.Firstly,the fatigue life is expressed by topology variables and the fatigue life filter function.The continuum fatigue optimization model is established with the independent continuous mapping(ICM)method.Secondly,fatigue life constraints are transformed to distortion energy constraints explicitly by taking advantage of the distortion energy theory.Thirdly,the optimization formulation is solved by the dual sequence quadratic programming(DSQP).And the design scheme of lightweight structure considering the fatigue characteristics is obtained.Finally,numerical examples illustrate the practicality and effectiveness of the fatigue optimization method.This method further expands the theoretical application of the ICM method and provides a novel approach for the fatigue optimization problem.
基金the National Natural Science Foundation of China (Grants 11072009 and 11872080)Beijing Education Committee Development Project (Grant SQKM201610005001).
文摘A new topology optimization method is formulated for lightweight design of multimaterial structures, using the independent continuous mapping (ICM) method to minimize the weight with a prescribed nodal displacement constraint. Two types of independent topological variable are used to identify the presence of elements and select the material for each phase, to realize the interpolations of the element stiffness matrix and total weight. Furthermore, an explicit expression for the optimized formulation is derived, using approximations of the displacement and weight given by first- and second-order Taylor expansions. The optimization problem is thereby transformed into a standard quadratic programming problem that can be solved using a sequential quadratic programming approach. The feasibility and effectiveness of the proposed multimaterial topology optimization method are demonstrated by determining the best load transfer path for four numerical examples. The results reveal that the topologically optimized configuration of the multimaterial structure varies with the material properties, load conditions, and constraint. Firstly, the weight of the optimized multimaterial structure is found to be lower than that composed of a single material. Secondly, under the precondition of a displacement constraint, the weight of the topologically optimized multimaterial structure decreases as the displacement constraint value is increased. Finally, the topologically optimized multimaterial structures differ depending on the elastic modulus of the materials. Besides, the established optimization formulation is more reliable and suitable for use in practical engineering applications with structural performance parameters as constraint.
基金Sponsored by the Ministerial Level Advanced Research Foundation (010896367)
文摘The independent continuous mapping（ICM） method is integrated into element free Galerkin method and a new implementation of topology optimization for continuum structure is presented.To facilitate the enforcement of the essential boundary condition and derivative of various sensitivities,a singular weight function in element free Galerkin method is introduced.Material point variable is defined to illustrate the condition of material point and its vicinity instead of element or node.The topological variables field is constructed by moving least square approximation which inherits the continuity and smoothness of the weight function.Due to reciprocal relationships between the topological variables and design variables,various structural responses sensitivities are derived according to the method for calculating the partial derivatives of compound functions.Numerical examples indicate that checkerboard pattern and mesh-dependence phenomena are overcome without additional restriction methods.
基金supported by the National Natural Science Foundation of China (Grants 11202078, 51405123)the Fundamental Research Funds for the Central Universities (Grant 2017MS077)
文摘The present work introduces a novel concurrent optimization formulation to meet the requirements of lightweight design and various constraints simultaneously.Nodal displacement of macrostructure and effective thermal conductivity of microstructure are regarded as the constraint functions, which means taking into account both the loadcarrying capabilities and the thermal insulation properties.The effective properties of porous material derived from numerical homogenization are used for macrostructural analysis. Meanwhile, displacement vectors of macrostructures from original and adjoint load cases are used for sensitivity analysis of the microstructure. Design variables in the form of reciprocal functions of relative densities are introduced and used for linearization of the constraint function. The objective function of total mass is approximately expressed by the second order Taylor series expansion. Then, the proposed concurrent optimization problem is solved using a sequential quadratic programming algorithm, by splitting into a series of sub-problems in the form of the quadratic program. Finally, several numerical examples are presented to validate the effectiveness of the proposed optimization method. The various effects including initial designs, prescribed limits of nodal displacement, and effective thermal conductivity on optimized designs are also investigated. An amount of optimized macrostructures and their corresponding microstructures are achieved.
文摘为了进一步研究连续体结构拓扑优化模型的合理性和可行性,基于独立、连续、映射(independent continuous mapping,ICM)方法,在满足结构位移约束的条件下,通过引入复合指数形式过滤函数对位移约束下质量最小化(minimum weight with a displacement constraint,MWDC)模型进行了改进,建立了基于独立连续变量和复合指数函数的位移约束平面连续体结构拓扑优化模型,并进行了优化求解.同时,利用M语言,基于Matlab软件平台,开发了相应的拓扑优化计算程序,并针对4种典型平面连续体结构进行了数值验证,分别比较分析了体积约束下的柔顺度最小化(minimum compliance with a volume constraint,MCVC)模型、MWDC模型以及改进的MWDC模型所得到的最优拓扑结构.数值结果表明:采用复合指数形式过滤函数改进的MWDC优化模型迭代次数更少,优化求解计算效率更高.
基金Supported by the National Natural Science Foundation of China(10472003)Beijing Natural Science Foundation (3002002)Beijing Educational Committee and the American MSC Company(KM200410005019)
