In order to develop a method for measuring of elements in Sipunculus nudus, the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were determined by actively coupled plasma atomic emission spectrometry （MWD） and microwa...In order to develop a method for measuring of elements in Sipunculus nudus, the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were determined by actively coupled plasma atomic emission spectrometry （MWD） and microwave digestion （ICP-AES）. The results showed that correlation coefficients al kept higher than 0.999 and the recovery rates of sample added standard solutions were in 98%-114%. The results indicated that the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were 17.119, 3.781, 0.695, 7.351, 1997.982, 0.620, 0.144, 4.249 mg/kg respectively. The contents of Mn exceeded national limit by hundredfold, Cd sevenfold, Pd fourfold, Cd three-and-a-half-fold, and As onefold. Sipunculs nudus became seriously pol uted. Therefore, it is necessary to formulate robust policies to fol ow closely and pay close attention to coastal areas pol ution around Dongfang City.展开更多
A quick and sensitive method was developed for the determination of 19 metal elements in Saffron,a traditional Chinese medicinal herb,collected from Tibet Autonomous Region and Henan Province of China using inductivel...A quick and sensitive method was developed for the determination of 19 metal elements in Saffron,a traditional Chinese medicinal herb,collected from Tibet Autonomous Region and Henan Province of China using inductively coupled plasma atomic emission spectrometry（ICP-AES）or inductively coupled plasma mass spectrometry（ICP-MS）.The determined 19 metals in Saffron include Ca,Fe,Mg,P,Sr,Al,Mn,Zn,V,Cr,Se,Co,Ni,Mo,and heavy metals As,Cu,Cd,Hg and Pb.For all the analyzed elements,the correlative coefficients of the calibration curves were no less than 0.9938.This proposed method was accurate,and the relative standard deviations of the measurements were lower than 5.25%.It can be used for the quality control of metal elements in Saffron.展开更多
The Lower Cambrian black rock series of South China is abnormally rich in noble metal elements. According to the concentrations, the ratios, the relations, the distribution and partition patterns of noble metal elemen...The Lower Cambrian black rock series of South China is abnormally rich in noble metal elements. According to the concentrations, the ratios, the relations, the distribution and partition patterns of noble metal elements, the authors think that the noble metals and other elements are neither directly from extraterrestrial materials, nor from the products of normal marine sedimentation. The abnormal enrichment of noble metal elements is closely related with hydrothermal fluid that flew out on the sea floor through deep cycling and reaction with Proterozoic ultramafic-mafic igneous rocks forming noble metal rich fluid. It is possible to form industrial multiple-element-ore-deposits, especially hydrothermal type platinum-group-element-ore-deposits in the region with strong hydrothermal action.展开更多
Noble metals have been widely used as heterogeneous catalysts because they exhibit high activity and selectivity for many reactions of both academic and industrial interest.The introduction of light atomic species(e.g...Noble metals have been widely used as heterogeneous catalysts because they exhibit high activity and selectivity for many reactions of both academic and industrial interest.The introduction of light atomic species(e.g.,H,B,C,and N)into noble metal lattices plays an important role in optimizing catalytic performance by modulating structural and electronic properties.In this review,we present a general overview of the recent advances in the modification of noble metals with light alloying elements for various catalytic reactions,particularly for energy‐related applications.We summarize the types,location,concentration,and ordering degree of light atoms as major factors in the performance of noble metal‐based catalysts,with emphasis on how they can be rationally controlled to promote activity and selectivity.We then summarize the synthetic strategies developed to incorporate light elements and highlight the theoretical and experimental methods for understanding the alloying effects.We further focus on the wide usage of noble metal‐based catalysts modified with different light alloying atoms and attempt to correlate the structural features with their catalytic performances.Finally,we discuss current challenges and future perspectives regarding the development of highly efficient noble metal‐based catalysts modified with light elements.展开更多
文摘In order to develop a method for measuring of elements in Sipunculus nudus, the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were determined by actively coupled plasma atomic emission spectrometry （MWD） and microwave digestion （ICP-AES）. The results showed that correlation coefficients al kept higher than 0.999 and the recovery rates of sample added standard solutions were in 98%-114%. The results indicated that the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were 17.119, 3.781, 0.695, 7.351, 1997.982, 0.620, 0.144, 4.249 mg/kg respectively. The contents of Mn exceeded national limit by hundredfold, Cd sevenfold, Pd fourfold, Cd three-and-a-half-fold, and As onefold. Sipunculs nudus became seriously pol uted. Therefore, it is necessary to formulate robust policies to fol ow closely and pay close attention to coastal areas pol ution around Dongfang City.
文摘A quick and sensitive method was developed for the determination of 19 metal elements in Saffron,a traditional Chinese medicinal herb,collected from Tibet Autonomous Region and Henan Province of China using inductively coupled plasma atomic emission spectrometry（ICP-AES）or inductively coupled plasma mass spectrometry（ICP-MS）.The determined 19 metals in Saffron include Ca,Fe,Mg,P,Sr,Al,Mn,Zn,V,Cr,Se,Co,Ni,Mo,and heavy metals As,Cu,Cd,Hg and Pb.For all the analyzed elements,the correlative coefficients of the calibration curves were no less than 0.9938.This proposed method was accurate,and the relative standard deviations of the measurements were lower than 5.25%.It can be used for the quality control of metal elements in Saffron.
文摘The Lower Cambrian black rock series of South China is abnormally rich in noble metal elements. According to the concentrations, the ratios, the relations, the distribution and partition patterns of noble metal elements, the authors think that the noble metals and other elements are neither directly from extraterrestrial materials, nor from the products of normal marine sedimentation. The abnormal enrichment of noble metal elements is closely related with hydrothermal fluid that flew out on the sea floor through deep cycling and reaction with Proterozoic ultramafic-mafic igneous rocks forming noble metal rich fluid. It is possible to form industrial multiple-element-ore-deposits, especially hydrothermal type platinum-group-element-ore-deposits in the region with strong hydrothermal action.
文摘Noble metals have been widely used as heterogeneous catalysts because they exhibit high activity and selectivity for many reactions of both academic and industrial interest.The introduction of light atomic species(e.g.,H,B,C,and N)into noble metal lattices plays an important role in optimizing catalytic performance by modulating structural and electronic properties.In this review,we present a general overview of the recent advances in the modification of noble metals with light alloying elements for various catalytic reactions,particularly for energy‐related applications.We summarize the types,location,concentration,and ordering degree of light atoms as major factors in the performance of noble metal‐based catalysts,with emphasis on how they can be rationally controlled to promote activity and selectivity.We then summarize the synthetic strategies developed to incorporate light elements and highlight the theoretical and experimental methods for understanding the alloying effects.We further focus on the wide usage of noble metal‐based catalysts modified with different light alloying atoms and attempt to correlate the structural features with their catalytic performances.Finally,we discuss current challenges and future perspectives regarding the development of highly efficient noble metal‐based catalysts modified with light elements.
