A new loop and fold wave-guide ion cyclotron resonance frequency （ICRF） antenna with a power output of 3 MW, which can operate at a frequency in the range of 30 MHz to 110 MHz, was designed. The design of key compon...A new loop and fold wave-guide ion cyclotron resonance frequency （ICRF） antenna with a power output of 3 MW, which can operate at a frequency in the range of 30 MHz to 110 MHz, was designed. The design of key components of the new ICRF antenna and the charac- ters of the new,.]~rototype ICRF antenna are presented. The thermo-mechanical analysis of both the Faraday shield and the current straps was conducted, and the stresses due to heat loads are studied in detail with different cooling-water velocities considered. In addition, the movability of prototype ICRF antenna under vacuum condition by the driving system was tested. An engineer- ing commissioning was successfully performed on the prototype ICRF antenna using the original transmitter. The results are close to the expected.展开更多
Detailed design of the vacuum feedthrough for the ion cyclotron radio frequency （ICRF） antenna in EAST, along with an electro-analysis and thermal structural analysis, is pre- sented. The electric field, the voltage...Detailed design of the vacuum feedthrough for the ion cyclotron radio frequency （ICRF） antenna in EAST, along with an electro-analysis and thermal structural analysis, is pre- sented. The electric field, the voltage standing wave ratio （VSWR） and the stresses in the vacuum feedthrough are studied. A method using the rings of oxygen-free copper as the cushion and macro- beam plasma arc welding is applied in the assembly to protect the ceramic from being damaged during welding. The vacuum leak test on the prototype of vacuum feedthrough is introduced.展开更多
An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to ope...An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to operate in a frequency range of 30 MHz to 80 MHz and hence the antenna geometry is optimized for 55 MHz. The design is based on the conventional strap antenna element. The coupling properties of the antenna are calculated with a slab model of the plasma for the antenna simulation. The coupling code is extended for the analysis of the toroidal antenna array separated by septa.展开更多
A new ICRF antenna has been designed in EAST, whose aims are to reduce the parallel RF electric fields Ell and to investigate the current drive using the fast magnetosonic wave. This antenna consists of four toroidall...A new ICRF antenna has been designed in EAST, whose aims are to reduce the parallel RF electric fields Ell and to investigate the current drive using the fast magnetosonic wave. This antenna consists of four toroidally spaced radiating straps. The electrical characteristics of the new antenna are estimated by using a three-dimensional electromagnetic commercial code. The S-parameters, RF current distribution and electromagnetic field distribution on and near the 4-strap antenna are analyzed, and the RF potentials influenced by antenna phasing and radial position are investigated.展开更多
The experimental advanced superconducting Tokamak has two suits of ion cyclotron radio frequency heating systems, in which the two antennas are of different structures. Their performance is assessed and compared by CS...The experimental advanced superconducting Tokamak has two suits of ion cyclotron radio frequency heating systems, in which the two antennas are of different structures. Their performance is assessed and compared by CST microwave studio. The radiating capacity of antennas and the arcing around them are estimated. The impurity release is analyzed by the radio frequency(RF) potential in the plasma sheath. The simulation results show that the radiating capacity for the folded antenna(I-port) is better than those for the double loops antenna(B-port). However,the folded antenna is worse than the double loops antenna in terms of breakdown. Moreover, the impurity production is relevant to spectrum shaping. The RF potential at(0, π,π, 0) phasing with the peak of spectrum k//= 8.5 m^(-1)is lower than the one with other phases. The impurity is reduced obviously when the folded antenna is powered with(0, π, π, 0) phasing.展开更多
On the experimental advanced superconducting tokamak(EAST), a pair of voltage and current probes(V/I probes) is installed on the ion cyclotron radio frequency transmission lines to measure the antenna input impedance,...On the experimental advanced superconducting tokamak(EAST), a pair of voltage and current probes(V/I probes) is installed on the ion cyclotron radio frequency transmission lines to measure the antenna input impedance, and supplement the conventional measurement technique based on voltage probe arrays. The coupling coefficients of V/I probes are sensitive to their sizes and installing locations, thus they should be determined properly to match the measurement range of data acquisition card. The V/I probes are tested in a testing platform at low power with various artificial loads. The testing results show that the deviation of coupling resistance is small for loads RL?>?2.5 Ω, while the resistance deviations appear large for loads RL?<?1.5 Ω, which implies that the power loss cannot be neglected at high VSWR. As the factors that give rise to the deviation of coupling resistance calculation, the phase measurement error is the more significant factor leads to deleterious results rather than the amplitude measurement error. To exclude the possible ingredients that may lead to phase measurement error, the phase detector can be calibrated in steady L-mode scenario and then use the calibrated data for calculation under H-mode cases in EAST experiments.展开更多
In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to...In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to improve antenna loading with low heating efficiency to avoid arching on transmission line. To design a new ion cyclotron range of frequencies （ICRF） antenna in LHD, calculation for a simple antenna model is conducted using three-dimensional electrical magnetic code （high frequency structure simulator, HFSS） for an water loading as an imaginary plasma with low heating efficiency. At resonant frequencies, antenna loading is sensitive to strap width, and resonant frequencies are strongly related to strap height. There is no differences of RF current profile on the strap surface between resonant frequency and non-resonant frequency. The strap should be perpendicularly placed against the magnetic field line, since Faraday-shield angle will lead to a decrease in the effective antenna height.展开更多
A variational principle code which can calculate self-consistently currents on the conductors is used to assess the coupling characteristic of the EAST 4-strap ion cyclotron range of frequency（ICRF） antenna. Taking ...A variational principle code which can calculate self-consistently currents on the conductors is used to assess the coupling characteristic of the EAST 4-strap ion cyclotron range of frequency（ICRF） antenna. Taking into account two layers of antenna conductors without lateral frame but with slab geometry, the antenna impedances as a function of frequency and the structure of RF field excited inside the plasma in various phasing cases are discussed in this paper.展开更多
文摘A new loop and fold wave-guide ion cyclotron resonance frequency （ICRF） antenna with a power output of 3 MW, which can operate at a frequency in the range of 30 MHz to 110 MHz, was designed. The design of key components of the new ICRF antenna and the charac- ters of the new,.]~rototype ICRF antenna are presented. The thermo-mechanical analysis of both the Faraday shield and the current straps was conducted, and the stresses due to heat loads are studied in detail with different cooling-water velocities considered. In addition, the movability of prototype ICRF antenna under vacuum condition by the driving system was tested. An engineer- ing commissioning was successfully performed on the prototype ICRF antenna using the original transmitter. The results are close to the expected.
文摘Detailed design of the vacuum feedthrough for the ion cyclotron radio frequency （ICRF） antenna in EAST, along with an electro-analysis and thermal structural analysis, is pre- sented. The electric field, the voltage standing wave ratio （VSWR） and the stresses in the vacuum feedthrough are studied. A method using the rings of oxygen-free copper as the cushion and macro- beam plasma arc welding is applied in the assembly to protect the ceramic from being damaged during welding. The vacuum leak test on the prototype of vacuum feedthrough is introduced.
文摘An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to operate in a frequency range of 30 MHz to 80 MHz and hence the antenna geometry is optimized for 55 MHz. The design is based on the conventional strap antenna element. The coupling properties of the antenna are calculated with a slab model of the plasma for the antenna simulation. The coupling code is extended for the analysis of the toroidal antenna array separated by septa.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2015GB101001)National Natural Science Foundation of China(Nos.11375236 and 11375235)
文摘A new ICRF antenna has been designed in EAST, whose aims are to reduce the parallel RF electric fields Ell and to investigate the current drive using the fast magnetosonic wave. This antenna consists of four toroidally spaced radiating straps. The electrical characteristics of the new antenna are estimated by using a three-dimensional electromagnetic commercial code. The S-parameters, RF current distribution and electromagnetic field distribution on and near the 4-strap antenna are analyzed, and the RF potentials influenced by antenna phasing and radial position are investigated.
基金Supported by the National Magnetic Confinement Fusion Science Program of China(No.2015GB101001)the Natural Science Foundation of China(No.11375236)
文摘The experimental advanced superconducting Tokamak has two suits of ion cyclotron radio frequency heating systems, in which the two antennas are of different structures. Their performance is assessed and compared by CST microwave studio. The radiating capacity of antennas and the arcing around them are estimated. The impurity release is analyzed by the radio frequency(RF) potential in the plasma sheath. The simulation results show that the radiating capacity for the folded antenna(I-port) is better than those for the double loops antenna(B-port). However,the folded antenna is worse than the double loops antenna in terms of breakdown. Moreover, the impurity production is relevant to spectrum shaping. The RF potential at(0, π,π, 0) phasing with the peak of spectrum k//= 8.5 m^(-1)is lower than the one with other phases. The impurity is reduced obviously when the folded antenna is powered with(0, π, π, 0) phasing.
基金National Natural Science Foundation of China under grant Nos. 11575237, 11775258, 11675213, 11375235 and 11375236National key research and development program (grant Nos. 2016YFA0400600 and 2016YFA0400601)+2 种基金International Scientific and Technological Cooperation Project of Anhui (grant No. 1704e1002207)the National Magnetic Confinement Fusion Science Programme of China (grant Nos. 2015GB101001 and 2013GB106001B)JSPSNRF-NSFC A3 Foresight Program in the field of Plasma Physics (NSFC No. 11261140328)
文摘On the experimental advanced superconducting tokamak(EAST), a pair of voltage and current probes(V/I probes) is installed on the ion cyclotron radio frequency transmission lines to measure the antenna input impedance, and supplement the conventional measurement technique based on voltage probe arrays. The coupling coefficients of V/I probes are sensitive to their sizes and installing locations, thus they should be determined properly to match the measurement range of data acquisition card. The V/I probes are tested in a testing platform at low power with various artificial loads. The testing results show that the deviation of coupling resistance is small for loads RL?>?2.5 Ω, while the resistance deviations appear large for loads RL?<?1.5 Ω, which implies that the power loss cannot be neglected at high VSWR. As the factors that give rise to the deviation of coupling resistance calculation, the phase measurement error is the more significant factor leads to deleterious results rather than the amplitude measurement error. To exclude the possible ingredients that may lead to phase measurement error, the phase detector can be calibrated in steady L-mode scenario and then use the calibrated data for calculation under H-mode cases in EAST experiments.
基金supported partially by the JSPS-CAS Core-University program in the field of 'Plasma and Nuclear Fusion'
文摘In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to improve antenna loading with low heating efficiency to avoid arching on transmission line. To design a new ion cyclotron range of frequencies （ICRF） antenna in LHD, calculation for a simple antenna model is conducted using three-dimensional electrical magnetic code （high frequency structure simulator, HFSS） for an water loading as an imaginary plasma with low heating efficiency. At resonant frequencies, antenna loading is sensitive to strap width, and resonant frequencies are strongly related to strap height. There is no differences of RF current profile on the strap surface between resonant frequency and non-resonant frequency. The strap should be perpendicularly placed against the magnetic field line, since Faraday-shield angle will lead to a decrease in the effective antenna height.
基金supported by the National Magnetic Confinement Fusion Science Program,China(Grant No.2015GB101001)the National Natural Science Foundation of China(Grant Nos.11375236 and 11375235)
文摘A variational principle code which can calculate self-consistently currents on the conductors is used to assess the coupling characteristic of the EAST 4-strap ion cyclotron range of frequency（ICRF） antenna. Taking into account two layers of antenna conductors without lateral frame but with slab geometry, the antenna impedances as a function of frequency and the structure of RF field excited inside the plasma in various phasing cases are discussed in this paper.
