An efficient multi-relay selection scheme in cooperative communication system

Cooperative relaying has played an important role in rapid evolution of wireless communications.The cooperative performance strongly depends on the selected relays.In this paper,we concentrate on relay selection in amplify-and-forward(AF)cooperative communication system,and an optimal multi-relay selection scheme is put forward to minimize the average symbol error rate(SER)of the system.Firstly,for the minimum average SER,on the basis of the statistic channel information,we define a parameter named equivalent channel gain which describes the channel status of two phases in the cooperative process.Then,under the constraint of equal power allocation,an optimal relay selection scheme is proposed in ascending order of equivalent channel gain(ECG).The scheme implies that the suitable number of relay nodes should be selected under the different signal-to-noise ratio(SNR)ranges to minimize the average SER.Computer simulation results show that the average SER rate of the proposed scheme is lower than these of the other schemes.

High-speed broadband data acquisition system based on FPGA

A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth is200 MHz,which solves the large bandwidth,high-speed signal acquisition and processing problems.At present,the data acquisition system is successfully used in broadband receiver test systems.

Roll angle measurement system based on triaxial magneto-resistive sensor

Aiming at large error when inertial devices measure the roll angle under high overload conditions,the article designs one kind of roll angle measurement system based on magneto-resistive sensor which calculates the roll angle by micro controller STM32.Experiment results of a triaxial turntable show that using magneto-resistive sensor to measure roll angle is feasible and of high accuracy,and it can calculate the roll angle of the conventional projectile with the error in 1°.

A new algorithm for wireless sensor network based on NS-2

Considering wireless sensor network characteristics,this paper uses network simulator,version2(NS-2)algorithm to improve Ad hoc on-demand distance vector(AODV)routing algorithm,so that it can be applied to wireless sensor networks.After studying AODV routing protocol,a new algorithm called Must is brought up.This paper introduces the background and algorithm theory of Must,and discusses the details about how to implement Must algorithm.At last,using network simulator(NS-2),the performance of Must is evaluated and compared with that of AODV.Simulation results show that the network using Must algorithm has perfect performance.

Particle-filter-based walking prediction model for occlusion situations

In the field of mobile robotics,human tracking has emerged as an important objective for facilitating human-robot interaction.In this paper,we propose a particle-filter-based walking prediction model that will address an occlusion situation.Since the target being tracked is a human leg,a motion model for a leg is required.The validity of the proposed model is verified experimentally.

Integrated management system of agro-fishery products based on QR-code

Recently,both the importance and awareness relating to food safety relating to agrochemicals,chemical fertilizers,the pollution of ecosystem and unwholesome foods are growing rapidly.For the same reason,the purchaser's curiosity increases to know about the production process which can be accomplished by production traceability system.The traceability system can store and superintend the specific attribute information about products regarding the productive centre,producer and production finish data.The products undergo various circulation processes and they are being managed by individually constructed traceability system.Thus,it is difficult for the producer and the consumer to guarantee the safety from transpirable issues about the falsification of production traceability because the traceability information can be re-produced by forging through various ways.So in this paper,we proposed a system for integrated management of agro-fishery products based on quick response code(QR-code)for forgery prevention which may help to solve these issues.The proposed system makes QR-code using production information provided by producer.And then it is provided to the distributor and the consumer through integrated service model using the QR-code.Therefore,this system make sure to provide the same production traceability about the products to the distributor and the consumer and always keeps both updated with the same information.

A CAWL handler for context-aware composite workflow services

In distributed computing environment,workflow technologies have been continuously developed.Recently,there is an attempt to apply these technologies to context-aware services in ubiquitous computing environment.The middleware,which offers services in such environments,should support the automation services suited for the user using various types of situational information around the user.In this paper,based on context-aware workflow language(CAWL),we propose a CAWL based composite workflow handler for supporting composite workflow services,which can integrate more than two service flows and handle them.The test results shows that the proposed CAWL handler can provide the user with the composite workflow services to cope with various demands on a basis of a scenario document founded on CAWL.

Obstacle detection using multi-sensor fusion

This paper presents an obstacle detection approach for blind pedestrians by fusing data from camera and laser sensor.For purely vision-based blind guidance system,it is difficult to discriminate low-level obstacles with cluttered road surface,while for purely laser-based system,it usually requires to scan the forward environment,which turns out to be very inconvenient.To overcome these inherent problems when using camera and laser sensor independently,a sensor-fusion model is proposed to associate range data from laser domain with edges from image domain.Based on this fusion model,obstacle's position,size and shape can be estimated.The proposed method is tested in several indoor scenes,and its efficiency is confirmed.

Effects of precursor solution concentration on dielectric properties of (Pb,La)(Zr,Ti)O_3 antiferroelectric thick films by sol-gel processing

Pb0.97La0.02Zr0.95Ti0.05O3(PLZT)antiferroelectric thick films derived from different precursor solution concentrations are prepared on platinized silicon substrates by sol-gel processing.The films present polycrystalline perovskite structure with a(100)preferred orientation by X-ray diffraction(XRD)analysis.The antiferroelectricity of the films is confirmed by the double hysteresis behaviors of polarization and double-bufferfly response of dielectric constant under the applied electrical field.Antiferroelectric properties and dielectric constant are improved while the polarization characteristic values are reduced with the increase of precursor solution concentration.The films at higher precursor solution concentration exhibit excellent dielectric properties.

Smart decontamination device for small-size radioactive scrap metal:using abrasion pin in rotating magnetic field and ultrasonic wave cleaner

A smart decontamination device is developed for small-size radioactive scrap metal(SSRSM)arisen from nuclear facilities.The abrasion pin in rotating magnetic field and ultrasonic wave cleaner are used for solving the problems of the second decontamination and high treatment cost.At first,the decontamination efficiency of each device is improved by upgrading the design.Optimal operating conditions are determined for each device.Next,both techniques are applied sequentially.Experimental results show that the efficiency of combined decontamination device is higher than that of each device.With the use of the developed device,the various SSRSMs are decontaminated for 15 min treatment in magnetic abrasion device and15 min treatment in ultrasonic cleaning device.Decontamination index ranges from18 to 56.Absolute values of all decontaminated samples are below the background value.

Preparation and characterization of TiO_2-SiO_2-Fe_3O_4 core-shell powders in nano scale

TiO2/SiO2/Fe3O4 nanoparticles have bigger specific area which can greatly increase the efficiency of photo-catalysis.The TiO2/SiO2/Fe3O4 particles in nano scale were prepared with reduction method at high temperature in this paper,and their morphology,particle size and magnetic property were characterized by transmission electron microscope(TEM),Xray diffraction(XRD) and magnetometer.The results show that the grain sizes of Fe3O4,SiO2-Fe3O4 and TiO2-SiO2-Fe3O4 particles were 50nm,70nm and 120nm,respectively.With the modification of SiO2,Fe3O4 magnetic cores are protected from oxidation.Moreover,by the addition of TiO2 function layer,TiO2-SiO2-Fe3O4 functional nanoparticles,with the saturation magnetization density of 34.1emu/g,is magnetically recoverable.The processes of this method are so simple that the nanoparticles can be produced in large quantity.

Study of TSP based on self-organizing map

Self-organizing map(SOM) proposed by Kohonen has obtained certain achievements in solving the traveling salesman problem(TSP).To improve Kohonen SOM,an effective initialization and parameter modification method is discussed to obtain a faster convergence rate and better solution.Therefore,a new improved self-organizing map(ISOM)algorithm is introduced and applied to four traveling salesman problem instances for experimental simulation,and then the result of ISOM is compared with those of four SOM algorithms:AVL,KL,KG and MSTSP.Using ISOM,the average error of four travelingsalesman problem instances is only 2.895 0%,which is greatly better than the other four algorithms:8.51%(AVL),6.147 5%(KL),6.555%(KG) and 3.420 9%(MSTSP).Finally,ISOM is applied to two practical problems:the Chinese 100 cities-TSP and102 counties-TSP in Shanxi Province,and the two optimal touring routes are provided to the tourists.

Dynamic test methods for natural frequency of footbridge

Using environmental random vibration as the excitation,traditional accelerometer method,non-contact video method and non-contact laser method were employed to determine the natural frequency of Kunyu River footbridge.All the results of these three methods are close to 2.70 Hz,which are concordant with each other and hence credible.

Synthesis and cost estimation of ethylene oxide process using PRO/Ⅱ

Ethylene oxide （EO） is a sold-out intermediate material for producing various chemicals.Major chemical companies are interested in whether new EO plant can create profit.This research is undertaken to investigate the economic feasibility of EO production.Direct oxidation of ethylene using silver on alpha-A12O3 catalyst type is adapted to produce EO of 60 000 t/year.We conduct the conceptual design.Firstly,we synthesize the optimal structure and then determine optimal conditions and the size of the equipments.Feasibility study shows that profit and loss turning point turns out to be 3.2 years based on the present market price.In addition,we conducts the economic analysis to prepare the risk of raw material market price variation ranging from 70％ to 130％.

Wireless sensing system for environmental humidity and temperature monitoring

Aiming at the actual demand for monitoring environmental information,a wireless sensing system for temperature and relative humidity(RH)monitoring based on radio frequency(RF)technology and mobile network was designed.This paper introduces the architecture of the system.The system uses AVR micro controller unit(MCU),KYL-1020U RF module and SHT71 to complete real-time temperature and humidity monitoring,and uses SIM900A module to realize remote alarming and monitoring with short message system(SMS)through global system for mobile communication(GSM).Experimental results show that the designed system has good stability of measurement and real-time performance,and it can be used in some small temperature and humidity monitoring occasions.

Study on GNSS satellite signal simulator

Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The system adopts the overall design scheme of digital signal processor(DSP)and field-programmable gate array(FPGA).It consists of four modules:industrial control computer simulation software,mid-frequency signal generator,digital-to-analog(D/A)module and radio frequency(RF)module.In this paper,we test the dynamic performance of simulator using the dynamic scenes testing method,and the signal generated by the designed simulator is primarily validated.

3D obstacle detection of indoor mobile robots by floor detection and rejection

Obstacle detection is essential for mobile robots to avoid collision with obstacles.Mobile robots usually operate in indoor environments,where they encounter various kinds of obstacles;however,2D range sensor can sense obstacles only in 2D plane.In contrast,by using 3D range sensor,it is possible to detect ground and aerial obstacles that 2D range sensor cannot sense.In this paper,we present a 3D obstacle detection method that will help overcome the limitations of 2D range sensor with regard to obstacle detection.The indoor environment typically consists of a flat floor.The position of the floor can be determined by estimating the plane using the least squares method.Having determined the position of the floor,the points of obstacles can be known by rejecting the points of the floor.In the experimental section,we show the results of this approach using a Kinect sensor.

Impact of low temperature on smartphone battery consumption

Most smartphones employ Li-ion(or Li-polymer)batteries as their power sources.Though battery consumption significantly varies along with the cell temperature,which is severely affected by ambient temperature,many studies simply assume that the cell temperature is equal to room temperature.Furthermore,there has not been any study that has quantitatively analysed the impact of ambient temperature on battery consumption.In this paper,it can be shown that low ambient temperature significantly affects battery consumption of a smartphone.To show the impact of the cell temperature on battery consumption,the battery consumption at low ambient temperature(-20℃)is compared with that at room temperature.As a result,high power consumption results in more severe battery consumption at low ambient temperature.Real measurements show that the battery consumption increases by up to 113.1%at low ambient temperature in comparison with the same discharge condition at room temperature.

AltBOC navigation signal quality assessment and measurement

In order to ensure that Chinese BeiDou satellite navigation system runs smoothly,the assessment of signal quality has become a significant task.Alternative binary offset carrier(AltBOC)is BeiDou B2 frequency signal.The acquisition of BeiDou signal is processed in off-line mode and the evaluation is performed by taking signal power spectrum,eye diagram,constellation,correlation,loss and s-curve deviation on AltBOC as signal quality evaluation parameters.The results illustrate that the new system signal,namely AltBOC signal,has the best performance in code tracking precision,anti-jamming and anti-multipath.

Movement and behavior analysis using neural spike signals in CA1 of rat hippocampus

The hippocampus which lies in the temporal lobe plays an important role in spatial navigation,learning and memory.Several studies have been made on the place cell activity,spatial memory,prediction of future locations and various learning paradigms.However,there are no attempts which have focused on finding whether neurons which contribute largely to both spatial memory and learning about the reward exist.This paper proposes that there are neurons that can simultaneously engage in forming place memory and reward learning in a rat hippocampus' s CA1 area.With a trained rat,a reward experiment was conducted in a modified 8-shaped maze with five stages,and utterance information was obtained from a CA1 neuron.The firing rate which is the count of spikes per unit time was calculated.The decoding was conducted with log-maximum likelihood estimation(Log-MLE) using Gaussian distribution model.Our outcomes provide evidence of neurons which play a part in spatial memory and learning regarding reward.