期刊文献+
共找到120篇文章
< 1 2 6 >
每页显示 20 50 100
Assessment of Axial Power Peaking Factors in GHARR-1 LEU Core: A Decadal Simulation Analysis
1
作者 Emmanuel Kwame Ahiave Emmanuel Ampomah-Amoako +1 位作者 Rex Gyeabour Abrefah Mathew Asamoah 《World Journal of Nuclear Science and Technology》 CAS 2024年第1期72-85,共14页
This study aims to thoroughly investigate the axial power peaking factors (PPF) within the low-enriched uranium (LEU) core of the Ghana Research Reactor-1 (GHARR-1). This study uses advanced simulation tools, like the... This study aims to thoroughly investigate the axial power peaking factors (PPF) within the low-enriched uranium (LEU) core of the Ghana Research Reactor-1 (GHARR-1). This study uses advanced simulation tools, like the MCNPX code for analysing neutron behavior and the PARET/ANL code for understanding power variations, to get a clearer picture of the reactor’s performance. The analysis covers the initial six years of GHARR-1’s operation and includes projections for its whole 60-year lifespan. We closely observed the patterns of both the highest and average PPFs at 21 axial nodes, with measurements taken every ten years. The findings of this study reveal important patterns in power distribution within the core, which are essential for improving the safety regulations and fuel management techniques of the reactor. We provide a meticulous approach, extensive data, and an analysis of the findings, highlighting the significance of continuous monitoring and analysis for proactive management of nuclear reactors. The findings of this study not only enhance our comprehension of nuclear reactor safety but also carry significant ramifications for sustainable energy progress in Ghana and the wider global context. Nuclear engineering is essential in tackling global concerns, such as the demand for clean and dependable energy sources. Research on optimising nuclear reactors, particularly in terms of safety and efficiency, is crucial for the ongoing advancement and acceptance of nuclear energy. 展开更多
关键词 GHARR-1 Power Peaking Factor Nuclear reactor Safety Low Enriched Uranium Core Operational Longevity Thermal Hydraulics
下载PDF
高性能聚丁烯-1/聚丙烯釜内合金管材的结构与性能
2
作者 魏文康 王传伟 刘晨光 《青岛科技大学学报(自然科学版)》 CAS 2024年第1期94-99,共6页
采用单螺杆管材挤出机,制备了高等规聚丁烯-1(iPB)与聚丁烯-1/聚丙烯合金(PBA)管材,通过差式扫描量热、小角X射线衍射、耐热蠕变、爆破性能、静液压性能与力学性能测试,考察了iPB与PBA管材的结晶性能与力学性能,PBA管材中PB的片晶厚度,... 采用单螺杆管材挤出机,制备了高等规聚丁烯-1(iPB)与聚丁烯-1/聚丙烯合金(PBA)管材,通过差式扫描量热、小角X射线衍射、耐热蠕变、爆破性能、静液压性能与力学性能测试,考察了iPB与PBA管材的结晶性能与力学性能,PBA管材中PB的片晶厚度,熔融温度与结晶温度均得到提升,耐热蠕变性、爆破与静液压性能、力学性能均优于iPB管材,可作为新一代高性能热水管材使用。 展开更多
关键词 高等规聚丁烯 聚丁烯/聚丙烯釜内合金 高性能管材
下载PDF
低浓化医院中子照射器(IHNI-1)堆芯的物理方案设计 被引量:9
3
作者 江新标 张文首 +2 位作者 高集金 李义国 周永茂 《中国工程科学》 2009年第11期17-21,共5页
采用蒙特卡罗程序MCNP/4B模拟计算了功率为30 kW的低浓化医院中子照射器的堆芯物理参数,设计了合理的堆芯布置方案、235U富集度、控制棒价值、后备反应性和停堆深度,得到固有安全性较高、寿期达10年且无需换料、采用低浓化UO2燃料的医... 采用蒙特卡罗程序MCNP/4B模拟计算了功率为30 kW的低浓化医院中子照射器的堆芯物理参数,设计了合理的堆芯布置方案、235U富集度、控制棒价值、后备反应性和停堆深度,得到固有安全性较高、寿期达10年且无需换料、采用低浓化UO2燃料的医院中子照射器的堆芯物理设计方案,为后续反应堆工程设计以及硼中子俘获治疗肿瘤用中子束的设计提供理论依据。 展开更多
关键词 医院中子照射器 硼中子俘获治疗 反应性
下载PDF
WIMS/CITATION在IHNI-1堆芯物理计算中的应用 被引量:1
4
作者 赵柱民 张良 +3 位作者 江新标 陈立新 朱养妮 周永茂 《中国工程科学》 北大核心 2012年第8期38-41,共4页
建立了利用WIMS+CITATION计算医院中子照射器Ⅰ型堆堆芯中子学参数的模型,计算了堆芯的功率分布、顶铍反应性价值、控制棒价值、温度系数、堆芯燃耗等中子学参数,计算结果与文献数据一致,表明文章所建立的计算模型可用于医院中子照射器... 建立了利用WIMS+CITATION计算医院中子照射器Ⅰ型堆堆芯中子学参数的模型,计算了堆芯的功率分布、顶铍反应性价值、控制棒价值、温度系数、堆芯燃耗等中子学参数,计算结果与文献数据一致,表明文章所建立的计算模型可用于医院中子照射器I型堆堆芯的物理计算。 展开更多
关键词 医院中子照射器Ⅰ型堆 堆芯 中子 WIMS CITATION
下载PDF
基于MCNP和ORIGEN2耦合程序的IHNI-1型堆裂变产物中毒及燃耗分析 被引量:5
5
作者 张信一 赵柱民 +3 位作者 江新标 郭和伟 陈立新 周永茂 《中国工程科学》 北大核心 2012年第8期69-71,共3页
为了准确地计算反应堆的裂变产物中毒和燃耗问题,开发了一套蒙特卡罗方法程序系统。利用通用的燃耗计算方法,基于MCNP和ORIGEN2,编写了相关的数据转换、截面修正、数据接口程序,实现了MCNP和ORIGEN2程序的耦合。采用堆芯精细结构划分,... 为了准确地计算反应堆的裂变产物中毒和燃耗问题,开发了一套蒙特卡罗方法程序系统。利用通用的燃耗计算方法,基于MCNP和ORIGEN2,编写了相关的数据转换、截面修正、数据接口程序,实现了MCNP和ORIGEN2程序的耦合。采用堆芯精细结构划分,对医院中子照射器Ⅰ型堆裂变产物中毒和燃耗进行了计算分析。 展开更多
关键词 ihni-1 MCNP ORIGEN2 燃耗
下载PDF
IHNI-1反应堆热工水力与瞬态特性分析
6
作者 陈立新 朱磊 +3 位作者 马腾跃 江新标 赵柱民 周永茂 《原子能科学技术》 EI CAS CSCD 北大核心 2012年第B12期796-799,共4页
本文利用子通道程序PRTHA计算了IHNI-1反应堆堆芯热工参数,分析了IHNI-1反应堆堆芯燃料元件与冷却剂的温度场分布,同时给出了堆芯发生过冷沸腾时的功率计算结果。利用RELAP5程序分析了反应堆瞬态特性,以及堆芯瞬态参数随反应性的变化过... 本文利用子通道程序PRTHA计算了IHNI-1反应堆堆芯热工参数,分析了IHNI-1反应堆堆芯燃料元件与冷却剂的温度场分布,同时给出了堆芯发生过冷沸腾时的功率计算结果。利用RELAP5程序分析了反应堆瞬态特性,以及堆芯瞬态参数随反应性的变化过程。通过本文的分析,表明IHNI-1反应堆具有较好的固有安全特性。 展开更多
关键词 ihni-1反应堆 热工水力 稳态 瞬态
下载PDF
分群结构对IHNI-1堆动态参数计算结果的影响研究
7
作者 张良 赵柱民 +2 位作者 江新标 陈伟 周永茂 《中国工程科学》 北大核心 2012年第8期47-50,共4页
基于WIMS和CITATION程序的计算结果,编制了动态参数计算程序CKPWC(calculating kinetic pa-rameters based on WIMS and CITATION),对医院中子照射器Ⅰ型堆(in-hospital neutron irradiator mark 1 reactor,IHNI-1)的动态参数计算进行... 基于WIMS和CITATION程序的计算结果,编制了动态参数计算程序CKPWC(calculating kinetic pa-rameters based on WIMS and CITATION),对医院中子照射器Ⅰ型堆(in-hospital neutron irradiator mark 1 reactor,IHNI-1)的动态参数计算进行了研究。首先使用WIMS计算出均匀化栅元截面以及69群通量,再使用CI-TATION进行四群扩散计算,最后编制动态参数计算程序,计算了IHNI-1动态参数(缓发中子有效份βeff和中子代时间Λ)。经过比较研究发现,分群结构对动态参数的计算结果有很大的影响。给出了计算IHNI-1缓发中子份额和中子代时间的最佳四群分群结构。使用文章中的最佳分群结构思想对西安脉冲堆动态参数进行了验证计算,计算结果与设计值符合一致,说明给出的IHNI-1动态参数计算结果具有一定的可信性。 展开更多
关键词 医院中子照射器Ⅰ型堆 动态参数 缓发中子有效份额 中子代时间
下载PDF
Highly efficient synthesis of 1-methoxy-2-propanol using ionic liquid catalysts in a micro-tubular circulating reactor 被引量:3
8
作者 Yu-Mei Liu Yan Zhou +3 位作者 Wen-Qiang Gong Zhang-Min Li Chao-Li Wang Duan-Jian Tao 《Green Energy & Environment》 SCIE CSCD 2020年第2期147-153,共7页
The catalysis of ionic liquids (ILs) in the traditional stirred reactor suffers from insufficient mass and heat transfer, which always needs a long reaction time and results in a low reaction rate. In this work, highl... The catalysis of ionic liquids (ILs) in the traditional stirred reactor suffers from insufficient mass and heat transfer, which always needs a long reaction time and results in a low reaction rate. In this work, highly efficient synthesis of 1-methoxy-2-propanol via the alcoholysis reaction of propylene oxide (PO) with methanol was proposed and achieved by the combination of micro-tubular circulating reactor with the IL [N4444] [Buty] catalyst. Compared with the stirred reactor, the rate of alcoholysis reaction in a micro-tubular circulating reactor was found to be significantly improved. The reaction time was remarkably shortened to 20 min from 180 min as well as the yield of 1-methoxy-2-propanol reached 92%. Moreover, the kinetic study further demonstrated that the main reaction rate to 1-methoxy-2-propanol (K1) was about 20 times larger than the side reaction rate to byproduct 2-methoxy-1-propanol (K2) in the temperature range of 363–383 K. Such combination of micro-tubular circulating reactor with IL catalysts is believed to be a class of effective process intensification technique for highly efficient synthesis of 1-methoxy-2-propanol. 展开更多
关键词 Ionic liquids Micro-tubular circulating reactor ALCOHOLYSIS Propylene oxide 1-Methoxy-2-propanol
下载PDF
KINETICS OF TEMPER EMBRITTLEMENT IN 2.25Cr-1Mo STEEL USED FOR HOT-WALL HYDROFINING REACTORS 被引量:1
9
作者 J.Z.Tan 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2004年第2期139-146,共8页
Based on the theory of grain boundary segregation, a kinetics model of temper em-brittlement caused by long-term service for hot-wall hydrofining reactors was studied.The kinetics model was applied to phosphorus (P) s... Based on the theory of grain boundary segregation, a kinetics model of temper em-brittlement caused by long-term service for hot-wall hydrofining reactors was studied.The kinetics model was applied to phosphorus (P) segregation in 2.25Cr-1Mo steelused for a hot-wall hydrofining reactor, and the kinetics of grain boundary segrea-tion of impurity P in the steel exposed to the process environment of the hydrofiningreactor was calculated on the basis of the model. The Auger electron spectroscopytest was performed in order to determine the grain boundary concentration of P. Theexperimental result is agreement with the theoretical calculated data. The results showthat the kinetics equation is reasonable for predicting the levels of grain boundarysegregation of impurity P in 2.25Cr-1Mo steel used for hot-wall hydrofining reactors. 展开更多
关键词 hydrofining reactor 2.25Cr-1Mo steel temper embrittlement KINETICS
下载PDF
Preliminary Exploration of the Reactor Configuration for Hydroformylation of 1-Dodecene Catalyzed by Water Soluble Rhodium Complex
10
作者 毛在砂 毕新艳 +3 位作者 禹耕之 张永强 杨超 王蓉 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2002年第1期45-51,共7页
Hydroformylation of 1-dodecene was studied in a biphasic system using water-soluble rhodium complex [RhCl(CO)(TPPTS)2] as catalyst in the presence of cetyl trimethyl ammonium bromide as surfactant to enhance the react... Hydroformylation of 1-dodecene was studied in a biphasic system using water-soluble rhodium complex [RhCl(CO)(TPPTS)2] as catalyst in the presence of cetyl trimethyl ammonium bromide as surfactant to enhance the reaction rate. Efforts were devoted to improve the performance of hydroformylation by exploring reactor the reaction configuration which enhanced the mixing, dispersion and interphase mass transfer. Experiments were carried out in a 0.5L autoclave at the total pressure of 1.1MPa and temperature from 363K to 373K. Several surface aeration configurations were tested, and higher hydroformylation rate with higher normal/branched aldehyde ratio produced were achieved. The experience suggest that improved reactor configuration by taking reaction engineering, measures is beneficial to better process economy in alkene hydroformylation. 展开更多
关键词 初步勘探 加氢甲酰化 1-十二烯 铑络合物
下载PDF
Management System Activities of the Operation and Utilization of GHARR-1
11
作者 Edward Shitsi Henry Cecil Odoi +10 位作者 Kwame Gyamfi Philip Dordoh-Gasu Isaac Kwasi Baidoo Edward Oscar Amponsah-Abu Emmanuel Kwesi Boafo Samuel Yao Ganyaglo Samuel Boakye Dampare Henry Kwame Obeng William Osei-Mensah Wilfred Sedofia Massiasta Robert Ekow Quagraine 《World Journal of Engineering and Technology》 2023年第4期807-826,共20页
The Ghana Research Reactor-1 (GHARR-1) is a 34 kW low enriched uranium (LEU) Miniature Neutron Source Reactor (MNSR), tank-in-pool type and cooled by natural circulation under atmospheric pressure operating conditions... The Ghana Research Reactor-1 (GHARR-1) is a 34 kW low enriched uranium (LEU) Miniature Neutron Source Reactor (MNSR), tank-in-pool type and cooled by natural circulation under atmospheric pressure operating conditions. GHARR-1 is owned by Ghana Atomic Energy Commission (GAEC) and operated by National Nuclear Research Institute (NNRI), one of the institutes of GAEC. GHARR-1 is housed by Nuclear Reactors Research Centre (NRRC), one of the Centres of NNRI. Management/Administration, Radiation protection, Reactor operation and maintenance, Reactor utilization and Physical protection are the various systems/units that integrate to manage the activities of operation and utilization of GHARR-1 in addition to the quality assurance and quality control management system of the research reactor facility. The GHARR-1 which is currently in operation follows a robust maintenance culture adopted by the management system and this has made it possible to keep the reactor in operation with minimal interruption. The management system activities adopted at the Centre to ensure safety of the workers, public and the research reactor facility include authorization of the operation of the reactor for any experiments/modifications;providing material and financial resources for maintaining the research reactor facility;following standard procedures while carrying out Neutron Activation Analysis;participation in IAEA proficiency test;irradiation sites/positions characterization;following standard procedures while carrying out reactor operation and maintenance including reactor and pool water purification and other related activities;monitoring radiation levels in the controlled, supervised and uncontrolled areas of the research reactor facility as well as during reactor operation and maintenance;controlling the physical entry of the workers and public into the research reactor facility;and ensuring that the security structures provided to protect the reactor facility are functioning properly. The thorough knowledge on the functions of the various components that make up the electrical/electronic and control systems of the reactor has been observed to be important for continuous successful maintenance of the research reactor to keep the reactor in operation. This work provides some management system activities adopted to monitor the activities of the research reactor operation and utilization to guarantee safety of workers, public and the environment as well as to safeguard a continuous operation of the research reactor. These management system activities adopted among others, are in the form of Monitoring Forms provided for monitoring the activities of the research reactor operation and utilization in order to ensure standard procedures and specifications are followed and quality services are rendered to the public. 展开更多
关键词 Management Systems Quality Assurance and Quality Control Research Re-actor Operation and Utilization Monitoring Forms Ghana Research reactor-1 (GHARR-1)
下载PDF
三代核电反应堆压力容器低合金钢焊缝性能对比分析
12
作者 梅乐 张俊宝 +3 位作者 王永东 黄逸峰 王秉熙 郑明光 《压力容器》 北大核心 2024年第2期1-6,共6页
通过模拟国内三代核电压水堆反应堆压力容器环焊缝,分别采用国产焊接材料和进口焊接材料,在焊接工艺性能、焊缝金属化学成分、拉伸、冲击韧性、落锤和低周疲劳试验等方面进行了对比分析。结果表明,国产和进口焊接材料的焊接工艺性能和... 通过模拟国内三代核电压水堆反应堆压力容器环焊缝,分别采用国产焊接材料和进口焊接材料,在焊接工艺性能、焊缝金属化学成分、拉伸、冲击韧性、落锤和低周疲劳试验等方面进行了对比分析。结果表明,国产和进口焊接材料的焊接工艺性能和焊缝金属力学性能均相当;焊接试件不同厚度取样位置的焊缝金属-28.3℃冲击吸收能量平均值都大于90 J,有较大的设计裕量。该国产焊接材料已应用于国内某三代核电机组反应堆压力容器,为进一步推广应用提供技术支撑。 展开更多
关键词 反应堆压力容器 SA-508 Gr.3 Cl.1 国产焊材 焊缝性能
下载PDF
TS-1催化丙烯环氧化及其生产工艺 被引量:8
13
作者 陈晓晖 孟祥坤 +1 位作者 陈宪 许锡恩 《石油化工》 CAS CSCD 北大核心 2000年第2期140-143,共4页
关键词 TS-1 环氧丙烷 催化 丙烯 环氧化
下载PDF
固定床反应器上挤条小晶粒TS-1催化丙烯环氧化反应(英文) 被引量:10
14
作者 左轶 宋万仓 +3 位作者 王梦丽 徐永海 王祥生 郭新闻 《物理化学学报》 SCIE CAS CSCD 北大核心 2013年第1期183-190,共8页
采用纳米TS-1母液作为晶种,在四丙基溴化铵(TPABr)-乙胺廉价水热体系中,合成出晶粒尺寸为600nm×400nm×250nm的小晶粒钛硅分子筛(TS-1),用挤条法将其成型,得到的挤条小晶粒TS-1被用于催化固定床反应器中的丙烯环氧化反应.采用... 采用纳米TS-1母液作为晶种,在四丙基溴化铵(TPABr)-乙胺廉价水热体系中,合成出晶粒尺寸为600nm×400nm×250nm的小晶粒钛硅分子筛(TS-1),用挤条法将其成型,得到的挤条小晶粒TS-1被用于催化固定床反应器中的丙烯环氧化反应.采用X射线衍射(XRD)光谱,傅里叶变换红外(FTIR)光谱,紫外-可见(UV-Vis)漫反射光谱及氮气物理吸附对挤条成型的小晶粒TS-1进行表征,并对丙烯环氧化的最优反应条件进行考察.其中所考察的条件包括:反应温度,压力,丙烯/H2O2摩尔比(n(C3H6)/n(H2O2)),丙烯、甲醇及H2O2的质量空速(WHSV)以及NH3·H2O浓度.在所考察的范围内,温度对环氧丙烷(PO)收率的影响较小,当反应压力为2.0MPa,n(C3H6)/n(H2O2)为4时,可以得到最高的PO收率.当丙烯、甲醇及H2O2的空速分别为0.93、2.5及0.25h-1时,PO在产物中的含量最高.较低的NH3·H2O浓度对高PO收率更有利.在优化的反应条件下,对比不同晶粒大小TS-1的催化性能,并考察了挤条小晶粒TS-1的长期运转性能,连续反应1000h,H2O2转化率及PO选择性仍能维持在95%以上. 展开更多
关键词 丙烯环氧化 TS-1 H2O2 反应条件 表征 固定床反应器
下载PDF
预处理对TS-1/硅藻土催化剂性能的影响 被引量:4
15
作者 刘红 卢冠忠 +2 位作者 郭杨龙 郭耘 王筠松 《无机化学学报》 SCIE CAS CSCD 北大核心 2003年第11期1202-1206,共5页
以固定床催化苯酚羟基化制苯二酚为目标反应,制备了负载型TS-1/硅藻土催化剂。运用FT-IR、XRD、UV-Vis、ICP-AES和NH3-TPD等表征手段,研究了预处理介质对TS-1/硅藻土催化剂物化和催化性能的影响。研究表明,用KAc、NaAc、NH4Ac、NH4Cl和H... 以固定床催化苯酚羟基化制苯二酚为目标反应,制备了负载型TS-1/硅藻土催化剂。运用FT-IR、XRD、UV-Vis、ICP-AES和NH3-TPD等表征手段,研究了预处理介质对TS-1/硅藻土催化剂物化和催化性能的影响。研究表明,用KAc、NaAc、NH4Ac、NH4Cl和HNO3水溶液预处理催化剂后,对TS-1分子筛的骨架结构和骨架Ti的存在无明显影响,但可脱除部分非骨架TiO2,使催化剂的表面酸浓度有所下降,提高了苯酚羟基化反应的活性、选择性和H2O2的有效利用率。用碱性溶液(NH3·H2O、Na2CO3和Na3PO4)处理后,催化剂的表面酸强度和酸浓度有所增加,但TS-1分子筛的骨架结构由于硅元素被碱溶解而遭到破坏,从而使TS-1/硅藻土对苯酚羟基化反应的催化性能明显下降甚至失活。 展开更多
关键词 预处理 TS-1 硅藻土 催化剂 性能 苯酚 羟基化 固定床反应器
下载PDF
离子液体催化苯与1-十二烯烷基化的循环反应分离实验装置 被引量:8
16
作者 乔聪震 李成岳 +1 位作者 陈标华 田小宁 《化工学报》 EI CAS CSCD 北大核心 2004年第12期2038-2042,共5页
针对酸性氯铝酸盐室温离子液体 [BMIM][AlCl4]催化苯与 1 十二烯烷基化合成十二烷基苯 (LAB)反应体系双液相、反应速率高和催化剂对湿气敏感的特点 ,建立了一套既可间歇操作也可连续操作的强制混合 反应 分离 再循环实验装置 .循环物... 针对酸性氯铝酸盐室温离子液体 [BMIM][AlCl4]催化苯与 1 十二烯烷基化合成十二烷基苯 (LAB)反应体系双液相、反应速率高和催化剂对湿气敏感的特点 ,建立了一套既可间歇操作也可连续操作的强制混合 反应 分离 再循环实验装置 .循环物料和离子液体的混合与烷基化反应在一台静态混合反应器中进行 ,反应后料液和离子液体在一台液 液沉降器中进行分离 .运行结果表明 ,在一定的物料循环和离子液体注入流量范围内 ,可以实现离子液体催化剂和反应料液的高效、快速混合与分离 ,催化剂被有效地保留在反应系统内并实现了它的再循环 . 展开更多
关键词 离子液体 烷基化 1-十二烯 静态混合反应器 再循环
下载PDF
四丙基氢氧化铵处理TS-1催化1-丁烯环氧化 被引量:7
17
作者 左轶 刘民 +1 位作者 姜海英 郭新闻 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2015年第3期611-616,共6页
在四丙基溴化铵-乙胺体系中,水热合成了晶粒尺寸为600nm的小晶粒钛硅分子筛TS-1。将其挤条成型后,采用四丙基氢氧化铵(TPAOH)稀溶液处理,然后用于催化1-丁烯与H2O2环氧化制备1,2-环氧丁烷的反应,并与TPAOH处理前的样品对比。结果表明,TP... 在四丙基溴化铵-乙胺体系中,水热合成了晶粒尺寸为600nm的小晶粒钛硅分子筛TS-1。将其挤条成型后,采用四丙基氢氧化铵(TPAOH)稀溶液处理,然后用于催化1-丁烯与H2O2环氧化制备1,2-环氧丁烷的反应,并与TPAOH处理前的样品对比。结果表明,TPAOH处理能显著提高TS-1的催化活性及稳定性。原因在于,晶粒外表面无定型载体的晶化疏通了TS-1的孔道,晶粒内部形成的空穴降低了反应物及产物的扩散阻力,且能提高容碳能力;少量四配位骨架钛转化为五配位钛,也使催化活性有所提高。 展开更多
关键词 钛硅分子筛 1-丁烯 1 2-环氧丁烷 四丙基氢氧化铵 固定床反应器
下载PDF
管道化氨解合成1-氨基蒽醌新工艺 被引量:4
18
作者 潘万贵 钱超 陈新志 《化学世界》 CAS CSCD 北大核心 2011年第6期362-364,共3页
采用管道化氨解工艺合成1-氨基蒽醌,将1-硝基蒽醌的40%甲苯溶液、液氨及催化剂氯化铵的1%正丁醇溶液以流量比9.25∶1∶1.85经预混合器后以0.15 mL/s的总流量流经外径6mm,内径3 mm,总长50 m的管道反应器进行反应,反应温度200℃,反应压力1... 采用管道化氨解工艺合成1-氨基蒽醌,将1-硝基蒽醌的40%甲苯溶液、液氨及催化剂氯化铵的1%正丁醇溶液以流量比9.25∶1∶1.85经预混合器后以0.15 mL/s的总流量流经外径6mm,内径3 mm,总长50 m的管道反应器进行反应,反应温度200℃,反应压力15 MPa,反应停留时间40 min,减压精馏得1-氨基蒽醌红色固体,熔点235-236℃,含量98.5%,收率95%。 展开更多
关键词 1-硝基蒽醌 1-氨基蒽醌 管道化反应器 氨解
下载PDF
TS-1分子筛对固定床中苯酚羟基化反应的催化性能 被引量:6
19
作者 刘红 卢冠忠 +2 位作者 郭杨龙 郭耘 王筠松 《催化学报》 SCIE CAS CSCD 北大核心 2004年第1期49-54,共6页
制备了用于固定床反应器的负载型TS 1分子筛催化剂 ,并以苯酚羟基化为探针反应 ,研究了载体、钛含量和预处理剂等对负载型TS 1分子筛催化性能的影响 ,考察了固定床反应器中苯酚羟基化反应的工艺条件 .结果表明 ,酸性较强的载体会加剧H2 ... 制备了用于固定床反应器的负载型TS 1分子筛催化剂 ,并以苯酚羟基化为探针反应 ,研究了载体、钛含量和预处理剂等对负载型TS 1分子筛催化性能的影响 ,考察了固定床反应器中苯酚羟基化反应的工艺条件 .结果表明 ,酸性较强的载体会加剧H2 O2 的分解 ,导致苯酚的转化率和H2 O2 的有效利用率下降 ;在所研究的ZSM 5 ,TiO2 ,Al2 O3 ,ZrO2 ,SiO2 和硅藻土载体中 ,硅藻土具有最好的催化性能 ;催化剂的活性与骨架钛含量有关 ;用HNO3 ,KAc ,NaAc,NH4Ac和NH4Cl处理过的催化剂 ,活性和选择性得到提高 ,而用NH3 ·H2 O ,Na2 CO3 和Na3 PO4等碱性物质处理后 ,催化剂的活性则下降 ;溶剂、反应温度、原料空速和苯酚 /H2 O2 摩尔比对苯酚羟基化反应有很大影响 .以丙酮为溶剂 ,在苯酚 /H2 O2 摩尔比为 3,反应温度为 84℃ ,WHSV为 8 4 6h-1的反应条件下 ,苯酚转化率、H2 O2 转化率、苯二酚选择性以及H2 O2 的有效利用率可分别达到 2 7 7% ,94 8% ,97 7%和 75 1% . 展开更多
关键词 TS—1 负载型催化剂 苯酚 过氧化氢 羟基化 苯二酚 固定床反应器
下载PDF
±1100kV特高压干式平波电抗器绝缘设计与试验分析 被引量:20
20
作者 张猛 王国金 +3 位作者 张月华 胡宾 奚晶亮 孙文越 《高电压技术》 EI CAS CSCD 北大核心 2015年第5期1760-1768,共9页
±1 100 kV干式平波电抗器作为±1 100 kV特高压直流输电工程关键主设备之一,肩负着抑制谐波、限制故障电流等作用。在±800 kV干式平波电抗器研制的基础上,根据±1 100 kV干式平波电抗器相关技术规范要求,对±1 10... ±1 100 kV干式平波电抗器作为±1 100 kV特高压直流输电工程关键主设备之一,肩负着抑制谐波、限制故障电流等作用。在±800 kV干式平波电抗器研制的基础上,根据±1 100 kV干式平波电抗器相关技术规范要求,对±1 100 kV干式平波电抗器的绝缘试验水平选取、绝缘设计、绝缘试验设置、试验方法、判断准则以及试验结果分析等方面进行研究。为验证平波电抗器的绝缘设计,对±1 100 kV干式平波电抗器进行了多次负极性全电压及截波雷电冲击绝缘试验和多次全电压中频振荡试验,±1 100kV干式平波电抗器在1 360 kV雷电冲击电压和1 050 kV中频振荡试验过程中,试品内部无烟雾、无异常声响,匝间无放电,试品表面无沿面闪络现象,未出现畸变现象,试验波形稳定,满足绝缘设计和技术规范的要求。试验结果表明:±1 100 kV特高压干式平波电抗器雷电冲击水平(1 360 kV)和中频振荡水平(1 050 kV)电压取值合理,绝缘设计可靠,满足雷电冲击和中频振荡设计要求,可为特高压干式平波电抗器的研发及设计提供参考依据。 展开更多
关键词 ±1100 KV特高压 干式平波电抗器 绝缘设计 绝缘试验 雷电冲击 中频振荡
下载PDF
上一页 1 2 6 下一页 到第
使用帮助 返回顶部