The title complex [Cu3L3(H2O)]DMFH2O (H2L = 4-(3-hydroxy-2-ethyl-4- pyridinone-1-yl)-aniline condensation salicylaldehyde) was obtained. The single-crystal X-ray study shows that it is a trinuclear compound [Cu3(C20H1...The title complex [Cu3L3(H2O)]DMFH2O (H2L = 4-(3-hydroxy-2-ethyl-4- pyridinone-1-yl)-aniline condensation salicylaldehyde) was obtained. The single-crystal X-ray study shows that it is a trinuclear compound [Cu3(C20H15N2O3)3(H2O)]DMFH2O. The coordi- nation sphere about each copper ion in the complex consists of two oxygen atoms from hydroxylpyridinone moiety of one ligand and one oxygen and one nitrogen atoms from salicyladehyde Schiff-base moiety of another ligand arranged in a slightly distorted square planar geometry. Among the three copper ions, one (Cu(2)) is coordinated by the other oxygen atom of water molecule on the fifth coordinate position to form a distorted square pyramid geometry. The crystal is of monoclinic, space group P21/c with a = 12.9202(5), b = 27.197(1), c = 17.0116(7) ? b = 100.588(1), V = 5875.9(4) 3, Z = 4, C63H57N7O12Cu3, Mr = 1294.78, Dc = 1.464 g/cm3, m = 1.146 mm-1, F(000) = 2668, R = 0.0784 and wR = 0.1546 for 6926 observed reflections with I > 2s(I). The differences of coordinate bond lengths are observed between anhydrous and hydrous units: in the former unit, the average bond lengths are 1.978 ?for CuN (azomethine), 1.883 ?for CuO (phenolic) in Schiff-base moiety, 1.959 ?for CuO (keto), and 1.919 ?for CuO (hydroxy) in hydroxypyridinone moiety; while those in the latter are longer with the following corresponding values: 1.985(5), 1.908(5), 1.993(5) and 1.919(4) ? respectively. The Cu(2)O (water) bond length is 2.375(6) ?展开更多
A new hydrogen bonded Cobalt(II) Schiff base complex,?N’-(pyridine-4-carboxaldehyde) isonicotinoylhydrazone Cobalt(II), has been synthesized from isoniazid and pyridine-4-carboxaldehyde and characterized by IR spectr...A new hydrogen bonded Cobalt(II) Schiff base complex,?N’-(pyridine-4-carboxaldehyde) isonicotinoylhydrazone Cobalt(II), has been synthesized from isoniazid and pyridine-4-carboxaldehyde and characterized by IR spectroscopy, 1H-NMR, elemental analysis, TGA and single crystal X-ray structure determination. X-ray crystal structure analysis shows an octahedral complex with a metal centre coordinated to two ligand molecules through the pyridine nitrogen atoms and four water molecules and containing two nitrate groups as counter ions. The complex crystallizes in the monoclinic crystal system and P2(1)/n space group. The unit cell dimensions are: a = 7.2108(4) Å, b = 16.6020(9) Å, c = 13.0389(6) Å,α = 90°, β = 103.972(4)°, γ = 90°. The molecule is symmetrical about the cobalt centre as observed from the 1H-NMR and 13C-NMR and confirmed by the single crystal X-ray structure of the complex. Thermogravimetric analysis shows two steps decomposition of the complex to leave a metal oxide residue. The title compound is expected to be biologically active as one of the precursors (isoniazid) is a therapeutic agent with well-established clinical applications.展开更多
Nickel(II) reacts with 2-acetylpyridine-4-methyl-3-thiosemicarbazone (APMT) and forms a yellow colored complex, which was extracted into n-hexanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance v...Nickel(II) reacts with 2-acetylpyridine-4-methyl-3-thiosemicarbazone (APMT) and forms a yellow colored complex, which was extracted into n-hexanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-APMT complex was measured at different intervals of time at 375 nm to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72 hrs. The system obeyed Beer’s law in the concentration range of 0.235 - 2.43 μg·ml–1 of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell’s sensitivity of the extracted species were found to be 2.16 × 104 L mol–1 ·cm–1 and 0.003 μg·cm–2 at 375 nm, respectively. Hence a detailed study of the extraction of nickel(II) with APMT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.展开更多
基金This work was supported by the foundation of Natural Science Research of Jiangsu Education Department (02KJB150007)
文摘The title complex [Cu3L3(H2O)]DMFH2O (H2L = 4-(3-hydroxy-2-ethyl-4- pyridinone-1-yl)-aniline condensation salicylaldehyde) was obtained. The single-crystal X-ray study shows that it is a trinuclear compound [Cu3(C20H15N2O3)3(H2O)]DMFH2O. The coordi- nation sphere about each copper ion in the complex consists of two oxygen atoms from hydroxylpyridinone moiety of one ligand and one oxygen and one nitrogen atoms from salicyladehyde Schiff-base moiety of another ligand arranged in a slightly distorted square planar geometry. Among the three copper ions, one (Cu(2)) is coordinated by the other oxygen atom of water molecule on the fifth coordinate position to form a distorted square pyramid geometry. The crystal is of monoclinic, space group P21/c with a = 12.9202(5), b = 27.197(1), c = 17.0116(7) ? b = 100.588(1), V = 5875.9(4) 3, Z = 4, C63H57N7O12Cu3, Mr = 1294.78, Dc = 1.464 g/cm3, m = 1.146 mm-1, F(000) = 2668, R = 0.0784 and wR = 0.1546 for 6926 observed reflections with I > 2s(I). The differences of coordinate bond lengths are observed between anhydrous and hydrous units: in the former unit, the average bond lengths are 1.978 ?for CuN (azomethine), 1.883 ?for CuO (phenolic) in Schiff-base moiety, 1.959 ?for CuO (keto), and 1.919 ?for CuO (hydroxy) in hydroxypyridinone moiety; while those in the latter are longer with the following corresponding values: 1.985(5), 1.908(5), 1.993(5) and 1.919(4) ? respectively. The Cu(2)O (water) bond length is 2.375(6) ?
文摘A new hydrogen bonded Cobalt(II) Schiff base complex,?N’-(pyridine-4-carboxaldehyde) isonicotinoylhydrazone Cobalt(II), has been synthesized from isoniazid and pyridine-4-carboxaldehyde and characterized by IR spectroscopy, 1H-NMR, elemental analysis, TGA and single crystal X-ray structure determination. X-ray crystal structure analysis shows an octahedral complex with a metal centre coordinated to two ligand molecules through the pyridine nitrogen atoms and four water molecules and containing two nitrate groups as counter ions. The complex crystallizes in the monoclinic crystal system and P2(1)/n space group. The unit cell dimensions are: a = 7.2108(4) Å, b = 16.6020(9) Å, c = 13.0389(6) Å,α = 90°, β = 103.972(4)°, γ = 90°. The molecule is symmetrical about the cobalt centre as observed from the 1H-NMR and 13C-NMR and confirmed by the single crystal X-ray structure of the complex. Thermogravimetric analysis shows two steps decomposition of the complex to leave a metal oxide residue. The title compound is expected to be biologically active as one of the precursors (isoniazid) is a therapeutic agent with well-established clinical applications.
文摘Nickel(II) reacts with 2-acetylpyridine-4-methyl-3-thiosemicarbazone (APMT) and forms a yellow colored complex, which was extracted into n-hexanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-APMT complex was measured at different intervals of time at 375 nm to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72 hrs. The system obeyed Beer’s law in the concentration range of 0.235 - 2.43 μg·ml–1 of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell’s sensitivity of the extracted species were found to be 2.16 × 104 L mol–1 ·cm–1 and 0.003 μg·cm–2 at 375 nm, respectively. Hence a detailed study of the extraction of nickel(II) with APMT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.
