People's Republic of China is one of the most rapidly developing countries in the world today. There is a great demand on highly actual and accurate spatial information of the whole country, especially of West Chi...People's Republic of China is one of the most rapidly developing countries in the world today. There is a great demand on highly actual and accurate spatial information of the whole country, especially of West China which becomes the focus of development of the Chinese government right now and in the next years, but where still not enough topographic maps are available. This raises great challenges to the surveying and mapping community in China. Facing the new challenges the Chinese Academy of Surveying and Mapping (CASM) started its pioneer work early 2002 to explore new techniques and technologies available today toward increasing the map productivity. With import of a CCNS/AEROcontrol system in November 2002, the first DGPS/IMU-based photogrammetric project in China was successfully accomplished jointly by CASM, the Germany-based companies IGI and Techedge. Two photogrammetric blocks of 1:4, 000 and 1:20,000 photo scales, respectively, were flown in Anyang, China. Direct georeferencing and integrated sensor orientation were conducted. Results achieved were proven by using ground checkpoints and compared with those of aerial triangulation. Orthophotos generated based on direct georeferencing shows the high efficiency and quality, and thus proved the promise of the new technology. Furthermore several DGPS/IMU-based photogammetric projects was accomplished one by one and a big project of more than 100, 000 km2 in the Inner Mongolia will be started in August 2003. The paper presents experiences with DGPS/IMU-based photogrammetry in China. Results achieved in concrete projects are shown and evaluated. Politic and technical specialties in China are discussed. Conclusions outline the potential of DGPS/IMU-based photogrammetric production in China.展开更多
Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The te...Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The technique of motion compensation presented in this paper, uses the GPS as a reference system to estimate and correct the systematic error of the IMU on the concept of linear unbiased minimum variance (LUMV). This new and effective method achieves very accurate position measurement (both high and low frequency) of the APC in not only short but also long terms, so that it can satisfy the requirement of high resolution airborne SAR. In the last section of the paper, some experimental simulations from raw data are given.展开更多
This paper presents a new algorithm for de-noising global positioning system （GPS） and inertial navigation system （INS） data and estimates the INS error using wavelet multi-resolution analysis algorithm （WMRA）-b...This paper presents a new algorithm for de-noising global positioning system （GPS） and inertial navigation system （INS） data and estimates the INS error using wavelet multi-resolution analysis algorithm （WMRA）-based genetic algorithm （GA） with a well-designed structure appropriate for practical and real time implementations because of its very short training time and elevated accuracy. Different techniques have been implemented to de-noise and estimate the INS and GPS errors. Wavelet de-noising is one of the most exploited techniques that have been recently used to increase the precision and reliability of the integrated GPS/INS navigation system. To ameliorate the WMRA algorithm, GA was exploited to optimize the wavelet parameters so as to determine the best wavelet filter, thresholding selection rule （TSR）, and the optimum level of decomposition （LOD）. This results in increasing the robustness of the WMRA algorithm to estimate the INS error. The proposed intelligent technique has overcome the drawbacks of the tedious selection for WMRA algorithm parameters. Finally, the proposed method improved the stability and reliability of the estimated INS error using real field test data.展开更多
文摘People's Republic of China is one of the most rapidly developing countries in the world today. There is a great demand on highly actual and accurate spatial information of the whole country, especially of West China which becomes the focus of development of the Chinese government right now and in the next years, but where still not enough topographic maps are available. This raises great challenges to the surveying and mapping community in China. Facing the new challenges the Chinese Academy of Surveying and Mapping (CASM) started its pioneer work early 2002 to explore new techniques and technologies available today toward increasing the map productivity. With import of a CCNS/AEROcontrol system in November 2002, the first DGPS/IMU-based photogrammetric project in China was successfully accomplished jointly by CASM, the Germany-based companies IGI and Techedge. Two photogrammetric blocks of 1:4, 000 and 1:20,000 photo scales, respectively, were flown in Anyang, China. Direct georeferencing and integrated sensor orientation were conducted. Results achieved were proven by using ground checkpoints and compared with those of aerial triangulation. Orthophotos generated based on direct georeferencing shows the high efficiency and quality, and thus proved the promise of the new technology. Furthermore several DGPS/IMU-based photogammetric projects was accomplished one by one and a big project of more than 100, 000 km2 in the Inner Mongolia will be started in August 2003. The paper presents experiences with DGPS/IMU-based photogrammetry in China. Results achieved in concrete projects are shown and evaluated. Politic and technical specialties in China are discussed. Conclusions outline the potential of DGPS/IMU-based photogrammetric production in China.
文摘Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The technique of motion compensation presented in this paper, uses the GPS as a reference system to estimate and correct the systematic error of the IMU on the concept of linear unbiased minimum variance (LUMV). This new and effective method achieves very accurate position measurement (both high and low frequency) of the APC in not only short but also long terms, so that it can satisfy the requirement of high resolution airborne SAR. In the last section of the paper, some experimental simulations from raw data are given.
基金supported in part by Graduate School of Studies through the Graduate Research Fellowship (GRF) sponsored by University Putra Malaysia
文摘This paper presents a new algorithm for de-noising global positioning system （GPS） and inertial navigation system （INS） data and estimates the INS error using wavelet multi-resolution analysis algorithm （WMRA）-based genetic algorithm （GA） with a well-designed structure appropriate for practical and real time implementations because of its very short training time and elevated accuracy. Different techniques have been implemented to de-noise and estimate the INS and GPS errors. Wavelet de-noising is one of the most exploited techniques that have been recently used to increase the precision and reliability of the integrated GPS/INS navigation system. To ameliorate the WMRA algorithm, GA was exploited to optimize the wavelet parameters so as to determine the best wavelet filter, thresholding selection rule （TSR）, and the optimum level of decomposition （LOD）. This results in increasing the robustness of the WMRA algorithm to estimate the INS error. The proposed intelligent technique has overcome the drawbacks of the tedious selection for WMRA algorithm parameters. Finally, the proposed method improved the stability and reliability of the estimated INS error using real field test data.
