Tubular Heat Enhancement Using Twisted Tape Inserts with Large Holes

Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.

Health Monitoring of Milling Tool Inserts Using CNN Architectures Trained by Vibration Spectrograms

In-process damage to a cutting tool degrades the surface􀀀nish of the job shaped by machining and causes a signi􀀀cant􀀀nancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty con􀀀gurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.

Effect of the Arrangement of a New-Type of Turbulator Inserts on Heat Pipe Exchanger Performances

This research tests the effect of introducing turbulators of a new type into a circular tube heat exchanger under a constant and uniform longitudinal heatflux condition.A 45 mm diameter copper tube with a length of 1,350 mm is utilized with a solid disk being inserted inside the tube,which consists of three sections,each one containing two slots.The slot is cut at a 45 degree angle toward the inner tube surface,which results in diverging theflow toward the inner hot tube surface in order to enhance the heat transfer process.Air is considered as the workingfluid with Prandtl number 0.71.The Reynolds number spans the interval from 6,000–13,500,which indicates that the consideredflow is turbulent.The heat exchanger performance is studied and analyzed in terms of average Nusselt number.The experimental results show that the Nusselt number value is directly proportional to the increase of the Reynolds number,and the number of turbulators inserts.With the use of three novel turbulators,the heat transfer was about 3.15 times higher than that in the smooth tube and the friction factor was about 1.11.

Analysis of Friction and Heat Transfer Characteristics of Tubes with Trapezoidal Cut Twisted Tape Inserts

The thermo-hydraulic properties of circular tubes with a twisted tape inside(used accordingly to induce turbulence and enhance heat transfer through the tube wall)are described for Reynolds Numbers ranging from 830 to 1990.Tapes twisted with the three distinct twist ratios are considered,namely,6,4.4 and 3.Air is used as the working fluid in several tests.For the sake of comparison,the standard tube with no insert is also examined.It is shown that in the presence of the twisted tape,the‘frictional factor’,‘Nusselt Number’and the‘thermal performance factor’are much higher than those obtained for the plain tube.Moreover,the tapes having the lowest twist ratio,i.e.,3,are more effective than the others in terms of heat transfer augmentation.The‘thermal performance factor’is greater than one for all the twisted tapes used in the experiments,which confirms the enhanced performances of the heat exchanger and the related savings in terms of total energy.

Performance Enhancement of the Proton Exchange Membrane Fuel Cell Using Pin Type Flow Channel with Porous Inserts

The design of the flow field is highly responsible for the performance of the Proton Exchange Membrane Fuel Cell (PEMFC). In this study, pin type flow channel is numerically analyzed by arranging carbon made porous material in uniform and zigzag manner on the rib surface of the flow field. The study focuses on enhancing the performance of PEMFC by reducing liquid flooding in the interface between the rib and Gas Diffusion Layer (GDL). A single PEMFC having an active area of 25 cm2, with three flow channel designs (conventional serpentine, pin type flow channel with 2 mm cubical porous inserts in zigzag and uniform pattern) are modeled for the numerical analysis. The effect of porosity of the carbon inserts on the cell performance is studied by varying its value from 0.6 to 0.9. The results show that the performance of the flow channel with zigzag and uniformly positioned porous inserts is more than the conventional serpentine flow channel by 20.36% and 16.87% respectively. The reason for this increase is the removal of the accumulated water from the rib surface due to the capillary action of the porous carbon inserts. This helps in eliminating the stagnant water regions under the rib and thereby helps in reducing liquid flooding.

Measuring compliance of package inserts in the Emirate of Abu Dhabi—UAE

Purpose: The aim of this study was to examine if package inserts (PIs) supplied with prescribed medications in the Emirate of Abu Dhabi contain all relevant information to the safe and appropriate use of these medications. Methods: Sixty seven PIs for prescription—only medications were evaluated against a set of safety criteria published from the Ministry of Health. Results: Analyzed PIs showed many deficiencies with regard to the Ministry of Health (MOH) Investigation New Drug Application (INDA) requirements. Particularly of concern were side effects, warnings, use in pregnancy, lactation, and the storage conditions for the product. Conclusions: This study indicated that information relevant to the safe and appropriate use of medications was not uniformly mentioned in the PIs analyzed. To avoid medication errors due to deficits in the current PIs, we recommend regulatory oversight and regulator audits from pharmaceutical company, followed by enhancement of regulations requiring companies to also create patient information leaflets.

Comparing the Effectiveness of Coatings on Carbide andCermet Cutting Tool Inserts

A series of metal cutting experiments was performed on a CNC lathe to evaluate the performance of various coatings on different tool substrates. The workpiece material was plain medium carbon steel and the cutting tool materials were carbide and cermet inserts coated with various single as well as multilayer coatings. Machining was done under various cutting conditions of speed and feed-rate, and for various durations of Cutting. The output parameters studied were the cutting forces (axial, radial and tangential), the surface roughness of the workpiece, as well as the tool wear (crater and flank wear). From these results, the performances of the various cutting inserts are evaluated and compared. Results show that cutting forces are significantly lower when using coated cermets than when using coated carbides although different coatings on the same substrate also result in different cutting forces. However, there is less difference in the surface roughness of the finished workpiece for the various coatings and substrates.

Wear Mechanisms of Ceramic Inserts in Machining Nickel-Based Superalloy

The performances of ceramic inserts in cutting nickel-based alloy were investigated. A new cutting test-bed was devised and used to deburr. The burr height on the working surface with notch wear in deburring cutting was compared with that in normal cutting. The impact force, impact pressure, and impact frequency of the saw-tooth-shaped chip edge on rake face and cutting edge at different speeds were calculated, and the influence of chip edge on notch wear formation was analyzed. A new tool design for reducing notch wear was presented, which is flexible and can deburr effectively.

Simulation of Heat Transfer in a Tubular Pipe Using Different Twisted Tape Inserts

This paper performs a simulation study of the heat transfer phenomena in a tubular U-loop pipe. We have investigated the enhancement of heat transfer with mass flow in a pipe without insert, with full length and short length twisted tape inserts. The length of the pipe is approximately 2436.80 mm long with 29 mm inner and 33 mm outer diameter respectively. A constant heat flux is taken which generated the boundary layer of the pipe close to the flowing fluid around the boundary. The simulations are considered for the stationary and the time dependent module for 35 seconds with different length of inserts. The comparisons are made among the results. We observed that the transfer of heat is enhanced significantly with the increase of the length of inserts inside the computational domain. We also found that, full length twisted tape inserts are more effective than comparing with the short length inserts and without insert.

Influence of Thermal Load on Mechanical Property of Cemented Carbide Material and Heavy Cemented Carbide Inserts Life

A large amount of cutting heat is produced during the heavy cutting process,and insert life is restricted by the effect of thermal load. The thermal load experiment of cemented carbide SCS,WF and YT15 is carried out,and the results show that the bending strength and fracture toughness of cemented carbide material decrease obviously under cyclic thermal load,while in the cooling process,the material mechanical property changes worse suddenly. The high-temperature mechanical property of SCS is the most stable,and that of YT15is the worst. Further,a relation model among cutting temperature,cutting parameters and insert life is established. Finally,the measures to improve heavy cemented carbide inserts life are summarized from the aspects of cutting parameters selection,insert optimization design and TiCN,A12O3,TiN complex insert coating. The research results are expected to provide support and reference for heavy cutting technology and insert technology.

Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts

Thickness deposition is a crucial issue on the application of electroformed micro mold inserts. Edge concentration effect is the main source of the non-uniformity. The techniques of adopting a non-conducting shield, a secondary electrode and a movable cathode were explored to improve the thickness deposition uniformity during the nickel electroforming process. Regarding these techniques, a micro electroforming system with a movable cathode was particularly developed. The thickness variation of a 16 mm×16 mm electroformed sample decreased respectively from 150% to 35%, 12% and 18% by these three techniques. Combining these validated methods, anickelmold insert for microlens array was electroformed with satisfactory mechanical properties and high replication precision. It could be applied to the following injection molding process.

FABRICATION AND PROPERTIES OF CERAMIC -CEMENTED CARBIDE COMPACT INSERTS

A novel ceramic cemented carbide compact insert was developed using hot pressing sintering technique. The surface layers of the sandwich material were ceramic and the middle layer was cemented carbide. The factors that affect the properties of the compact insert were analyzed. Theoretical analyses and experiments indicated that the cemented carbide with greater elastic module and thermal expansion coefficient than ceramic should be used in the sandwich material in order to get high equivalent flexure strength and the geometric parameters of the compact insert are also important to its properties.

A Novel Insertion Solution for the Travelling Salesman Problem

The studypresents theHalfMax InsertionHeuristic (HMIH) as a novel approach to solving theTravelling SalesmanProblem (TSP). The goal is to outperform existing techniques such as the Farthest Insertion Heuristic (FIH) andNearest Neighbour Heuristic (NNH). The paper discusses the limitations of current construction tour heuristics,focusing particularly on the significant margin of error in FIH. It then proposes HMIH as an alternative thatminimizes the increase in tour distance and includes more nodes. HMIH improves tour quality by starting withan initial tour consisting of a ‘minimum’ polygon and iteratively adding nodes using our novel Half Max routine.The paper thoroughly examines and compares HMIH with FIH and NNH via rigorous testing on standard TSPbenchmarks. The results indicate that HMIH consistently delivers superior performance, particularly with respectto tour cost and computational efficiency. HMIH’s tours were sometimes 16% shorter than those generated by FIHand NNH, showcasing its potential and value as a novel benchmark for TSP solutions. The study used statisticalmethods, including Friedman’s Non-parametric Test, to validate the performance of HMIH over FIH and NNH.This guarantees that the identified advantages are statistically significant and consistent in various situations. Thiscomprehensive analysis emphasizes the reliability and efficiency of the heuristic, making a compelling case for itsuse in solving TSP issues. The research shows that, in general, HMIH fared better than FIH in all cases studied,except for a few instances (pr439, eil51, and eil101) where FIH either performed equally or slightly better thanHMIH. HMIH’s efficiency is shown by its improvements in error percentage (δ) and goodness values (g) comparedto FIH and NNH. In the att48 instance, HMIH had an error rate of 6.3%, whereas FIH had 14.6% and NNH had20.9%, indicating that HMIH was closer to the optimal solution. HMIH consistently showed superior performanceacross many benchmarks, with lower percentage error and higher goodness values, suggesting a closer match tothe optimal tour costs. This study substantially contributes to combinatorial optimization by enhancing currentinsertion algorithms and presenting a more efficient solution for the Travelling Salesman Problem. It also createsnew possibilities for progress in heuristic design and optimization methodologies.

Enhancing hydrogen evolution and oxidation kinetics through oxygen insertion into nickel lattice

Nickel-based materials,including metallic Ni and Ni oxide,have been widely studied in the exploration of non-precious-metal hydrogen electrocatalysts,but neither pure Ni nor NiO is ideal for the hydrogen evolution reaction(HER)and hydrogen oxidation reaction(HOR).In this paper,an oxygen insertion strategy was applied on nickel to regulate its hydrogen electrocatalytic performance,and the oxygen-inserted nickel catalyst was successfully obtained with the assistance of tungsten dioxide support(denoted as O-Ni/WO_(2)).The partial insertion of oxygen in Ni maintains the face-centered cubic arrangement of Ni atoms,simultaneously expanding the lattice and increasing the lattice spacing.Consequently,the adsorption strength of^(*)H and^(*)OH on Ni is optimized,thus resulting in superior electrocatalytic performance of0-Ni/WO_(2)in alkaline HER/HOR.The Tafel slope of O-Ni/WO_(2)@NF for HER is 56 mV dec^(-1),and the kinetic current density of O-Ni/WO_(2)for HOR reaches 4.85 mA cm^(-2),which is ahead of most currently reported catalysts.Our proposed strategy of inserting an appropriate amount of anions into the metal lattice could provide more possibilities for the design of high-performance catalysts.

Esophageal inserted subclavian catheter:a rare complication

Central venous catheterization(CVC) is an invasive procedure for administering fluids,nutrients,and drugs;monitoring central venous pressure;performing pulmonary artery catheterization;and placing transvenous pacemakers in intensive care units and all specialties,from anesthesia to emergency medicine,for the treatment of trauma and hemodynamically unstable pediatric and adult patients.[1,2]Complications have been observed in more than 15% of patients who underwent CVC.Mechanical,infectious,and thrombotic complications have been reported in 5%–19%,5%–26%,and 2%–26% of patients,respectively.[3] Malposition,on the other hand,is common in subclavian catheter insertion and is usually associated with an initially misplaced guidewire.[4]

Reversible Optical Isolators and Quasi-Circulators Using a Magneto-Optical Fabry-Pérot Cavity

Nonreciprocal optical devices are essential for laser protection,modern optical communication and quantum information processing by enforcing one-way light propagation.The conventional Faraday magneto-optical nonreciprocal devices rely on a strong magnetic field,which is provided by a permanent magnet.As a result,the isolation direction of such devices is fixed and severely restricts their applications in quantum networks.In this work,we experimentally demonstrate the simultaneous one-way transmission and unidirectional reflection by using a magneto-optical Fabry-Pérot cavity and a magnetic field strength of 50 mT.An optical isolator and a three-port quasi-circulator are realized based on this nonreciprocal cavity system.The isolator achieves an isolation ratio of up to 22 dB and an averaged insertion loss down to 0.97 dB.The quasi-circulator is realized with a fidelity exceeding 99% and an overall survival probability of 89.9%,corresponding to an insertion loss of~0.46 dB.The magnetic field is provided by an electromagnetic coil,thereby allowing for reversing the light circulating path.The reversible quasi-circulator paves the way for building reconfigurable quantum networks.

An efficient method for constructing a random insertional mutant library for forward genetics in Nannochloropsis oceanica

Insertional mutation,phenotypic evaluation,and mutated gene cloning are widely used to clone genes from scratch.Exogenous genes can be integrated into the genome during non-homologous end joining(NHEJ)of the double-strand breaks of DNA,causing insertional mutation.The random insertional mutant library constructed using this method has become a method of forward genetics for gene cloning.However,the establishment of a random insertional mutant library requires a high transformation efficiency of exogenous genes.Many microalgal species show a low transformation efficiency,making constructing random insertional mutant libraries difficult.In this study,we established a highly efficient transformation method for constructing a random insertional mutant library of Nannochloropsis oceanica,and tentatively tried to isolate its genes to prove the feasibility of the method.A gene that may control the growth rate and cell size was identified.This method will facilitate the genetic studies of N.oceanica,which should also be a reference for other microalgal species.

Appropriate Combination of Crossover Operator and Mutation Operator in Genetic Algorithms for the Travelling Salesman Problem

Genetic algorithms(GAs)are very good metaheuristic algorithms that are suitable for solving NP-hard combinatorial optimization problems.AsimpleGAbeginswith a set of solutions represented by a population of chromosomes and then uses the idea of survival of the fittest in the selection process to select some fitter chromosomes.It uses a crossover operator to create better offspring chromosomes and thus,converges the population.Also,it uses a mutation operator to explore the unexplored areas by the crossover operator,and thus,diversifies the GA search space.A combination of crossover and mutation operators makes the GA search strong enough to reach the optimal solution.However,appropriate selection and combination of crossover operator and mutation operator can lead to a very good GA for solving an optimization problem.In this present paper,we aim to study the benchmark traveling salesman problem(TSP).We developed several genetic algorithms using seven crossover operators and six mutation operators for the TSP and then compared them to some benchmark TSPLIB instances.The experimental studies show the effectiveness of the combination of a comprehensive sequential constructive crossover operator and insertion mutation operator for the problem.The GA using the comprehensive sequential constructive crossover with insertion mutation could find average solutions whose average percentage of excesses from the best-known solutions are between 0.22 and 14.94 for our experimented problem instances.

Lower extremity peripherally inserted central catheter placement ectopic to the ascending lumbar vein:A case report

BACKGROUND Peripherally inserted central catheters(PICCs)are an essential infusion route for oncology patients receiving intravenous treatments,but lower extremity veni-puncture is the preferred technique for patients with superior vena cava syndrome(SVCS).We report the case of a patient with a lower extremity PICC ectopic to the ascending lumbar vein,to indicate and verify PICC catheterisation in the lower extremity is safe and feasible.And hope to provide different per-spectives for clinical PICC venipuncture to get the attention of peers.CASE SUMMARY On 24 August 2022,a 58-year-old male was admitted to our department due to an intermittent cough persisting for over a month,which worsened 10 d prior.Imaging and laboratory investigations suggested the patient with pulmonary malignancy and SVCS.Chemotherapy was not an absolute contraindication in this patient.Lower extremity venipuncture is the preferred technique because administering upper extremity venous transfusion to patients with SVCS can exacerbate oedema in the head,neck,and upper extremities.The patient and his family were informed about the procedure,and informed consent was obtained.After successful puncture and prompt treatment,the patient was discharged,experiencing some relief from symptoms.CONCLUSION Inferior vena cava catheterisation is rare and important for cancer patients with SVCS,particularly in complex situations involving ectopic placement.

Treatment of benign rectal stricture caused by repeated anal insertion by endoscopy and balloon dilation:A case report

BACKGROUND Benign rectal strictures can be categorized as primary(disease-related)and secondary(surgical anastomosis-related).Secondary strictures arise from surgical complications,whereas primary strictures have diverse etiologies,including various inflammatory conditions.Benign strictures are usually managed by surgery and endoscopy.We present an unusual etiology of benign rectal stricture caused by the repeated insertion of foreign objects into the rectum for sexual purposes,resulting in rectal injury and subsequent chronic inflammation.CASE SUMMARY A 53-year-old man presented to the outpatient clinic of the Colorectal Surgery Department with symptoms of chronic constipation and bloody stools.The patient previously experienced rectal injury due to foreign object insertion for sexual purposes.Colonoscopy revealed benign circumferential narrowing of the rectum.He underwent treatment by endoscopic argon plasma coagulation and balloon dilation and follow-up as an outpatient for 4 months.A colonoscopy at the end of the follow-up period revealed no evidence of rectal stricture relapse.CONCLUSION A history of rectal injury,followed by chronic inflammation,should be considered in patients with benign rectal strictures.Management with endoscopic argon plasma coagulation and balloon dilation can prevent the need for surgical resection of benign rectal strictures.