A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of t...A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of the integrating sphere and requirement of the strip uniform illumination region. This system was called dome light. White light LED array light sources were used for uniform illumi- nation. The LEDs were filtrated to composite array light source based on coefficient of variation of a single LED. The standard white board and SG color checkers were used in the line-scan CCD imaging experiments under the dome light and ordinary illumination light source. The average color difference （AE） of SG color checkers in CIELAB space was 2. 091 under the dome light and 2. 286 under ordinary illumination light source respectively. Experimental results indicate that the dome light can satisfy illumination uniformity and color rendering consistency for line-scan CCD and provide a standard light source for uniform calibration of different cameras.展开更多
LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the i...LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.展开更多
Based on nonimaging design method, uniform illuminance systems with LED source were developed to create a uniform illuminated circular region with a desired size in a screen at a prescribed place. By using ray-tracing...Based on nonimaging design method, uniform illuminance systems with LED source were developed to create a uniform illuminated circular region with a desired size in a screen at a prescribed place. By using ray-tracing software based on Monte-Carlo method, the simulation results show that in the illuminated region the luminous uniformity is higher than 90%.展开更多
A 300 μm×300 μm light emitting diode(LED) chip is divided into nine 80 μm×80 μm units with 30 μm spacing between adjacent ones. After arraying, the total saturation light output power and the maximum in...A 300 μm×300 μm light emitting diode(LED) chip is divided into nine 80 μm×80 μm units with 30 μm spacing between adjacent ones. After arraying, the total saturation light output power and the maximum injection current are enhanced by 5.19 times and nearly 7 times, respectively. In addition, the test results demonstrate that the illuminance uniformity on the receiving surface reaches the optimum when the spacing between the arrays is equal to the maximum flat condition. The larger the number of arrays, the greater the area with uniform illuminance on the receiving surface.展开更多
基金Supported by the National Natural Science Foundation of China(61078048)
文摘A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of the integrating sphere and requirement of the strip uniform illumination region. This system was called dome light. White light LED array light sources were used for uniform illumi- nation. The LEDs were filtrated to composite array light source based on coefficient of variation of a single LED. The standard white board and SG color checkers were used in the line-scan CCD imaging experiments under the dome light and ordinary illumination light source. The average color difference （AE） of SG color checkers in CIELAB space was 2. 091 under the dome light and 2. 286 under ordinary illumination light source respectively. Experimental results indicate that the dome light can satisfy illumination uniformity and color rendering consistency for line-scan CCD and provide a standard light source for uniform calibration of different cameras.
文摘LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.
文摘Based on nonimaging design method, uniform illuminance systems with LED source were developed to create a uniform illuminated circular region with a desired size in a screen at a prescribed place. By using ray-tracing software based on Monte-Carlo method, the simulation results show that in the illuminated region the luminous uniformity is higher than 90%.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China(No.61204055)
文摘A 300 μm×300 μm light emitting diode(LED) chip is divided into nine 80 μm×80 μm units with 30 μm spacing between adjacent ones. After arraying, the total saturation light output power and the maximum injection current are enhanced by 5.19 times and nearly 7 times, respectively. In addition, the test results demonstrate that the illuminance uniformity on the receiving surface reaches the optimum when the spacing between the arrays is equal to the maximum flat condition. The larger the number of arrays, the greater the area with uniform illuminance on the receiving surface.
