Ionization wave propagation and cathode sheath formation due to surface dielectric-barrier discharge sustained in pulsed mode

This work deals with the experimental study of a surface dielectric-barrier discharge,as a part of the ongoing interest in the control of plasma induced electro-fluid dynamic effects(e.g.plasma actuators).The discharge is generated using a plasma reactor consisting of a fused silica plate which is sandwiched between two printed circuit boards where the electrodes are developed.The reactor is driven by narrow high voltage square pulses of asymmetric rising(25 ns)and falling(2.5μs)parts,while the discharge evolution is considered in a temporarily and spatially resolved manner over these pulses.That is,conventional electrical and optical emission analyzes are combined with high resolution optical emission spectroscopy and ns-resolved imaging,unveiling main characteristics of the discharge with a special focus on its propagation along the dielectric-barrier surface.The voltage rising part leads to cathode-directed ionization waves,which propagate with a speed up to 105m s~(-1).The voltage falling part leads to cathode sheath formation on the driven electrode.Τhe polarization of the dielectric barrier appears critical for the discharge dynamics.

Non-invasive optical characterization and estimation of Zn porosity in gas tungsten arc welding of Fe–Al joints using CR model and OES measurements

In this study,we employed a non-invasive approach based on the collisional radiative(CR)model and optical emission spectroscopy(OES)measurements for the characterization of gas tungsten arc welding(GTAW)discharge and quantification of Zn-induced porosity during the GTAW process of Fe–Al joints.The OES measurements were recorded as a function of weld current,welding speed,and input waveform.The OES measurements revealed significant line emissions from Zn-I in 460–640 nm and Ar-I in 680–800 nm wavelength ranges in all experimental settings.The OES coupled CR model approach for Zn-I line emission enabled the simultaneous determination of both essential discharge parameters i.e.electron temperature and electron density.Further,these predictions were used to estimate the Zn-induced porosity using OES-actinometry on Zn-I emission lines using Ar as actinometer gas.The OES-actinometry results were in good agreement with porosity data derived from an independent approach,i.e.x-ray radiography images.The current study shows that OES-based techniques can provide an efficient route for real-time monitoring of weld quality and estimate porosity during the GTAW process of dissimilar metal joints.

Recommendation on data collection and annotation of ocular appearance images in ptosis

Ptosis is a common ophthalmologic condition,and the diagnosis is primarily based on ocular appearance.Thediagnosis of such conditions can be improved using emerging technology such as artificial intelligence-basedmethods.However,unified data collection and labeling standards have not yet been established.This directlyimpacts the accuracy of ptosis diagnosis based on appearance alone.Therefore,in the present study,we aimedto establish a procedure to obtain and label images to devise a recommendation system for optimal recognitionof ptosis based on ocular appearances.This would help to standardize and facilitate data sharing and serve as aguideline for the development and improvisation of algorithms in artificial intelligence for ptosis.