Rhodium(Ⅲ)-catalyzed chelation-assisted C-H imidation of arenes via umpolung of the imidating reagent

Rh(Ⅲ)-catalyzed, chelation-assisted oxidative C-H imidation of arenes with N-H imide have been realized using PhI(OAc)2 as an oxidant. This transformation exhibits a broad substrate scope and tolerates various functional groups. The reaction proceeded via in situ generation of an iodine(Ⅲ) imido. DFT calculations suggest that this oxidative imidaton system proceeds via a Rh(Ⅲ)-Rh(Ⅴ)-Rh(Ⅲ) pathway.

Rapid and chemoselective imidation of sulfides in aqueous buffer enabled by a novel guanidine-derived N-O reagent

Herein we report the facile synthesis of a series of novel N-O reagents and identify N′-di-Boc-N′′-[(mesitylsulfonyl)oxy]-guanidine as an efficient imidating reagent.This reagent is synthetically scalable and bench-stable,yet it shows unprecedented reactivity and chemoselectivity towards S(II)in buffer/hexafluoroisopropanol(HFIP)system,to generate a new class of Nguanyl sulfilimines.Further transformation of N-guanyl sulfilimines to N-guanyl sulfoximines provides us a chance to investigate these rarely reached compounds,which are shown to be versatile precursors to a variety of N-heterocyclic and NHsulfoximines.Our work provides an addition to the tool box of both sulfur imidation and guanidine synthesis,especially for the need of rapid and selective modifications of sulfur(II)center under biocompatible conditions.

Isomeric fluorescence sensors for wide range detection of ionizing radiations

In order to achieve a wider range of ionizing radiations detection,novel fluorescence sensing materials have been developed that utilize the fluorescence enhancement phenomenon caused by the intramolecular photoinduced electron transfer(PET)effect.Two perylene diimide isomers PDI-P and PDI-B were designed and synthesized,and their molecular structures were characterized by high-resolution Fourier transform mass spectrometry(HRMS),nuclear magnetic resonance hydrogen and carbon spectroscopy(~1H and~(13)C NMR).The interaction between ionizing radiation and fluorescent molecules was simulated by HCl titration.The results show that combining PDIs and HCl can improve fluorescence through the retro-PET process.Despite the similarities in chemical structures,the fluorescent enhancement multiple of PDI-B with aromatic amine as electron donor is much higher than that of PDI-P with alkyl amine.In the direct irradiation experiments of ionizing radiation,the emission enhancement multiples of PDI-P and PDI-B are 2.01 and 45.4,respectively.Furthermore,density functional theory(DFT)and time-dependent density functional theory(TDDFT)calculations indicate that the HOMO and HOMO-1 energy ranges of PDI-P and PDI-B are 0.54 e V and 1.13 e V,respectively.A wider energy range has a stronger driving force on electrons,which is conducive to fluorescence quenching.Both femtosecond transient absorption spectroscopy(fs-TAS)and transient fluorescence spectroscopy(TFS)tests show that PDI-B has shorter charge separation lifetime and higher electron transfer rate constant.Although both isomers can significantly reduce LOD during PET process,PDI-B with aromatic amine has a wider detection range of 0.118—240 Gy due to its larger emission enhancement,which is a leap of three orders of magnitude.It breaks through the detection range of gamma radiation reported in existing studies,and provides theoretical support for the further study of sensitive and effective new materials for ionizing radiation detection.

Imide-pillared covalent organic framework protective films as stable zinc ion-conducting interphases for dendrite-free Zn metal anodes

The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared covalent organic framework(ZPC)protective film has been engineered as a stable Zn^(2+)ion-conducting interphase to modulate interfacial kinetics and suppress side reactions for ZMAs.Compared to bare Zn,ZPC@Zn exhibits a higher Zn^(2+)ionic conductivity,a larger Zn^(2+)transference number,a lower electronic conductivity,a smaller desolvation activation energy and correspondingly a significant suppression of corrosion,hydrogen evolution and Zn dendrites.Impressively,the ZPC@Zn||ZPC@Zn symmetric cell obtains a cycling lifespan over 3000 h under 5 mA cm^(-2)for 1 mA h cm^(-2).The ZPC@Zn||NH_(4)V_(4)O_(10)coin-type full battery delivers a specific capacity of 195.8 mA h g^(-1)with a retention rate of78.5%at 2 A g^(-1)after 1100 cycles,and the ZPC@Zn||NH_(4)V_(4)O_(10) pouch full cell shows a retention of70.1%in reversible capacity at 3 A g^(-1)after 1100 cycles.The present incorporation of imide-linked covalent organic frameworks in the surface modification of ZMAs will offer fresh perspectives in the search for ideal protective films for the practicality of AZIBs.

Electrochemical Properties of PP13TFSI-LiTFSI-P（VdF-HFP） Ionic Liquid Gel Polymer Electrolytes

N-Methyl-N-propylpiperidiniumbis（trifluoromethanesulfonyl）imide （PP13TFSI）, bis（triflu- oromethanesulfonyl）imide lithium salt （LiTFSI）, and poly（vinylidene difluoride-co- hexafluoropropylene） （P（VdF-HFP）） were mixed and made into ionic liquid gel polymer electrolytes （ILGPEs） by solution casting. The morphology of ILGPEs was observed by scanning electron microscopy. It was found that the ILGPE had a loosened structure with liquid phase uniformly distributed. The ionic conductivity, lithium ion transference num- bet and electrochemical window were measured by electrochemical impedance spectroscopy, chronoamperometric and linear sweep voltammetry. The ionic conductivity and lithium ion transference number of this ILGPE reached 0.79 mS/cm and 0.71 at room temperature, and the electrochemical window was 0 to 5.1 V vs. Li＋/Li. Battery tests indicated that the ILGPE is stable when being operated in Li/LiFePO4 batteries. The discharge capacity maintained at about 135, 117, and 100 mAh/g at 30, 75, and 150 mA/g rates, respectively. The capacity retentions were almost 100% after 100 cycles without little capacity fading.

Effect of BaNH,CaNH,Mg3N2 on the activity of Co in NH3 decomposition catalysis

Development of active and non-noble metal-based catalyst for H2 production via NH3 decomposition is crucial for the implementation of NH3 as a H2 carrier.Co-based catalysts have received increasing attention because of its high intrinsic activity and moderate cost.In this work,we examined the effect of BaNH,CaNH and Mg3 N2 on the catalytic activity of Co in the NH3 decomposition reaction.The H2 formation rate ranks the order as Co-BaNH>Co-CaNH>Co-Mg3 N2≈Co/CNTs within a reaction temperature range of 300-550℃.It is worth pointing out that the H2 formation rate of Co-BaNH at 500℃reaches20 mmolH2 gcat-1 min-1,which is comparable to those of the active Ru/Al2 O3(ca.17 mmolH2 gcat-1 min1)and Ru/AC(21 mmolH2 gcat-1 min-1)catalysts under the similar reaction conditions.In-depth research shows that Co-BaNH exhibits an obviously higher intrinsic activity and much lower Ea(46.2 kJ mol-1)than other Co-based catalysts,suggesting that BaNH may play a different role from CaNH,Mg3 N2 and CNTs during the catalytic process.Combined results of XRD,Ar-TPD and XAS show that a[Co-N-Ba]-like intermediate species is likely formed at the interface of Co metal and BaNH,which may lead to a more energy-efficient reaction pathway than that of neat Co metal for NH3 decomposition.

Synthesis and characterization of mixing soft-segmented waterborne polyurethane polymer electrolyte with room temperature ionic liquid

Composite polymer electrolytes based on mixing soft-segment waterborne polyurethane （WPU） and 1-butyl-3-methylimidazolium bis[（trifluoromethyl）sulfonyl]imide （BMImTFSI） have been prepared and characterized. The addition of BMImTFSI results in an increase of the ionic conductivity. At high BMImTFSI concentration （BMImTFSI/WPU = 3 in weight ratio）, the ionic conductivity reaches 4.27 × 10^-3 S/cm at 30 ℃. These composite polymer electrolytes exhibit good thermal and electrochemical stability, which are high enough to be applied in lithium batteries.

Synthesis of Methyl-substituted Phthalazinone-based Aromatic Poly(amide imide)s

A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.

Electrochemically-driven interphase conditioning of magnesium electrode for magnesium sulfur batteries

The earth-abundant magnesium metal is a kind of promising anode material due to its low reduction potential (-2.356V vs. SHE), high volumetric and gravimetric specific capacities of 3882 mAh cm-3 and 2234 mAh g_1 respectively [1]. Moreover, the magnesium anode shows high safety due to the non-dentritic electrodeposition mechanism during cycling, which is related to the strong Mg-Mg bonding and the consequent high energy barrier between the crystal boundaries of different crystal orientation [2].

Influence of Curing Accelerators on the Imidization of Polyamic Acids and Properties of Polyimide Films

In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.

SYNTHESIS OF NEW AROMATIC POLY(AMIDE IMIDE)S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.

Acidic Polyester Imides as Thermally Stable Binder Polymers for Negative-Tone Black Photoresist

Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.

Reactions of Imidates with Phenoxyacetyl Chloride

The reactions of imidates including cyclic imidates, oxazolines and dihydrooxazine with phenoxyacetyl chloride, were investigated. The results indicate that diacylamide or acylamide was generated from N-phenoxyacetylated imidates, while cyclic imidate oxazolines underwent a ring-opening reaction to yield different amides depending on the reaction conditions. Even under non-nucleophilic conditions, no β-lactam-fused oxazoline derivative was obtained.

Carbide derived carbon electrode with natural graphite addition in magnesium electrolyte based cell for supercapacitor enhancements

Herein,we have presented a supercapacitor based on carbide derived carbon（CDC） electrode with natural graphite（NG） addition.The capacitor was analyzed at 22°C by cyclic voltammetry,galvanostatic charge-discharge and impedance techniques using a 0.5 mol/L of magnesium（II）bis（trifluoro methanesulfonyl） imide（Mg TFSI） in ethylene carbonate-propylene carbonate（EC ：PC = 1 ：1,v/v） as electrolyte.The results conclude that the CDC cell enhancements have been proven by the composite electrode（5%–30% NG to CDC） especially on the cell efficiency and voltage i.e.,the CDC cell around 2.5 V limit was improved.An obtainable specific capacitance,real power and energy density are 15 F g-1,1.2 k W kg-1and 15 Wh kg-1,respectively.

Instability of lithium bis(fluorosulfonyl)imide(LiFSI)–potassium bis(fluorosulfonyl)imide(KFSI) system with LiCoO_2 at high voltage

The cycling performance, impedance variation, and cathode surface evolution of the Li/LiCoO2 cell using Li FSI–KFSI molten salt electrolyte are reported. It is found that this battery shows poor cycling performance, with capacity retention of only about 67% after 20 cycles. It is essential to understand the origin of the instability. It is noticed that the polarization voltage and the impedance of the cell both increase slowly upon cycling. The structure and the properties of the pristine and the cycled LiCoO2 cathodes are investigated by x-ray diffraction（XRD）, scanning electron microscopy（SEM）, Raman spectroscopy, x-ray photoelectron spectroscopy（XPS）, and transmission electron microscopy（TEM）. It is found that the LiCoO2 particles are corroded by this molten salt electrolyte, and the decomposition by-product covers the surface of the LiCoO2 cathode after 20 cycles. Therefore, the surface side reaction explains the instability of the molten salt electrolyte with LiCoO2.

Implementation of a choline bis(trifluoromethylsulfonyl)imide aqueous electrolyte for low temperature EDLCs enabled by a cosolvent

We report a carbon/carbon capacitor based on micro/mesoporous carbon electrodes with cost-effective and eco-friendly aqueous choline bis(trifluoromethylsulfonyl)imide(Ch TFSI)electrolyte with a cosolvent enabling low-temperature operation down to-30℃.For this purpose,a Mg O-templated hierarchical carbon(MP98B)with an average mesopore diameter of 3.5 nm was prepared by pyrolysis of magnesium citrate hydrate at 900℃.To reach lower temperatures,the melting point and viscosity of the aqueous electrolyte were reduced by mixing water(W)with an organic solvent(methanol,M,or isopropanol,I)of high dielectric constant and low viscosity.5 mol kg^(-1)(5 m)Ch TFSI in an optimized volume fraction of cosolvent,M_(0.75)W_(0.25),and I_(0.75)W_(0.25),showed the highest conductivity;the higher conductivity in M_(0.75)W_(0.25)(22.8 and 3.1 m S cm^(-1) at 20 and-30℃,respectively)than in I_(0.75)W_(0.25)(8.5 and0.5 m S cm^(-1)at 20 and-30℃,respectively)is attributed to the lower viscosity of the M_(0.75)W_(0.25)solution.The electrochemical stability window(ESW)of 5 m Ch TFSI in M_(0.75)W_(0.25)and I_(0.75)W_(0.25)(1.6 V)on an MP98B electrode was determined by applying the S-method.Meanwhile,by adjusting the mass ratio of the two electrodes,a MP98B/MP98B capacitor using the 5 m electrolyte in M_(0.75)W_(0.25)could operate with a good life span up to 1.6 V while exhibiting a better charge propagation,greater specific capacitance,and higher specific energy than in I_(0.75)W_(0.25).

Synthesis and Crystal Structure of N-Phenylbis(ferrocenecarboxyl)imide

The ferrocenyl compound, N-phenylbis（ferrocenecarboxyl）imide （C28H23NO2Fe2, Mr = 517.17）, was synthesized and structurally characterized by means of X-ray single-crystal diffraction. It crystallizes in monoclinic, space group C2/c with a = 21.374（14）, b = 10.430（7）, c = 10.741（7） A, β= 114.184（8）°, V= 2184（2） A^3, Z= 4, Dc = 1.573 g/cm^3, F（000） = 1064, μ（MoKα） = 1.355 mm ^-1, T= 291（2） K, the final R = 0.0548 and wR = 0.1437 for 1524 observed reflections with 1 〉 2σ（I）. In this compound, the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.

Synthesis of Poly(aryl amide imide)s Derived from o-diphenyltrimellitic Anhydride

The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.