In order to find out a multi-metal zincate solution to get good micromorphology and fine adhesion of coatings, sulfate zincate and zinc oxide zincate with different chelating agents combinations, of which there are 8 ...In order to find out a multi-metal zincate solution to get good micromorphology and fine adhesion of coatings, sulfate zincate and zinc oxide zincate with different chelating agents combinations, of which there are 8 solutions are designed. CHI630 electrochemical test system is applied to measure the φ—t curves of zincate process and Tafle curves of zincated plates in 3.5% NaCl medium. The analyzed results show that when molar ratio of sodium hydroxide to zinc ions is constant, the better chelating agents combination for multi-metal zincation solution is the combination of sodium potassium tartrate and sodium citrate in zinc oxide solution, from which zinc alloy is high in potential and perfect in corrosion resistance. After the second zincate immersion for 60s, the immersion potential is -1.606V(vs SCE). The corrosion current density is 6.612, J_ corr/(A·cm -2); and the corrosion potential is -1.381, φ_ corr(I=0)/V.展开更多
The effects of non-cyanide zincation process parameters on the microstructure of the zincation layer on A356 alloy were investigated by scanning electronic microscope.With the increasing of zincation time,the zinc gra...The effects of non-cyanide zincation process parameters on the microstructure of the zincation layer on A356 alloy were investigated by scanning electronic microscope.With the increasing of zincation time,the zinc grain size and the number density increase gradually,and the zinc grains adhere each other.The zinc grain obtained in the double-dipping process is finer,compacter and more homogeneous than that obtained in the single-dipping process.With the increasing of the zincation temperature,the morphology of zinc grains changes from spherical shape to flake-like shape.However,higher zincation temperature results in the flaking off of the zincation layer from the matrix.The optimized zincation temperature is 20-30 ℃.The quality of the zincation layer obtained in a low concentration,non-cyanide and multi-element zincation solutions is much better than these obtained in conventional high concentration zincation solution,dilute zincation solutions or a dilute zincation solution containing nickel.In addition,the matrix alloy and the pre-treatment also have significant influence on the morphology of the zincation layer.展开更多
The corrosion mechanism of 510L low alloy steel treated by acid-cleaned surface(ACS)and eco-pickled surface(EPS)techniques in three simulated solutions(S0:atmospheric environment;S1:soil environment;S2:industrial envi...The corrosion mechanism of 510L low alloy steel treated by acid-cleaned surface(ACS)and eco-pickled surface(EPS)techniques in three simulated solutions(S0:atmospheric environment;S1:soil environment;S2:industrial environment)and the influence of interaction between different corrosive anions on corrosion were investigated.The results show that the total corrosion rates of samples in three simulated solutions were in order of S2>S0>S1,which is simultaneously correlated with initial corrosion dissolution processes as well as after the formation of corrosion products.HCO3−will inhibit the initial corrosion owing to the formation of films,whereas HSO3−will accelerate the dissolutions of the matrix based on the synergistic action of HSO3−and Cl−.On the other hand,there is no significant difference in corrosion rates between the samples treated by ACS and EPS techniques.The EPS technique that is safe,reusable and environmentally friendly can be further widely used in future work.展开更多
文摘In order to find out a multi-metal zincate solution to get good micromorphology and fine adhesion of coatings, sulfate zincate and zinc oxide zincate with different chelating agents combinations, of which there are 8 solutions are designed. CHI630 electrochemical test system is applied to measure the φ—t curves of zincate process and Tafle curves of zincated plates in 3.5% NaCl medium. The analyzed results show that when molar ratio of sodium hydroxide to zinc ions is constant, the better chelating agents combination for multi-metal zincation solution is the combination of sodium potassium tartrate and sodium citrate in zinc oxide solution, from which zinc alloy is high in potential and perfect in corrosion resistance. After the second zincate immersion for 60s, the immersion potential is -1.606V(vs SCE). The corrosion current density is 6.612, J_ corr/(A·cm -2); and the corrosion potential is -1.381, φ_ corr(I=0)/V.
文摘The effects of non-cyanide zincation process parameters on the microstructure of the zincation layer on A356 alloy were investigated by scanning electronic microscope.With the increasing of zincation time,the zinc grain size and the number density increase gradually,and the zinc grains adhere each other.The zinc grain obtained in the double-dipping process is finer,compacter and more homogeneous than that obtained in the single-dipping process.With the increasing of the zincation temperature,the morphology of zinc grains changes from spherical shape to flake-like shape.However,higher zincation temperature results in the flaking off of the zincation layer from the matrix.The optimized zincation temperature is 20-30 ℃.The quality of the zincation layer obtained in a low concentration,non-cyanide and multi-element zincation solutions is much better than these obtained in conventional high concentration zincation solution,dilute zincation solutions or a dilute zincation solution containing nickel.In addition,the matrix alloy and the pre-treatment also have significant influence on the morphology of the zincation layer.
基金supported by Key Scientific Research Project in Shanxi Province(Grant Nos.202003D111001 and 202102050201010)Fundamental Research Program of Shanxi Province(Grant No.202103021223293)+3 种基金National Natural Science Foundation of China(Grant No.52071227)Scientific Research Fund of Taiyuan University of Science and Technology(Grant No.20202044)Award Fund for Outstanding Doctors in Shanxi Province(Grant No.20212041)Postgraduate Education Innovation Project of Shanxi Province(Grant Nos.2022Y686 and 2022Y684).
文摘The corrosion mechanism of 510L low alloy steel treated by acid-cleaned surface(ACS)and eco-pickled surface(EPS)techniques in three simulated solutions(S0:atmospheric environment;S1:soil environment;S2:industrial environment)and the influence of interaction between different corrosive anions on corrosion were investigated.The results show that the total corrosion rates of samples in three simulated solutions were in order of S2>S0>S1,which is simultaneously correlated with initial corrosion dissolution processes as well as after the formation of corrosion products.HCO3−will inhibit the initial corrosion owing to the formation of films,whereas HSO3−will accelerate the dissolutions of the matrix based on the synergistic action of HSO3−and Cl−.On the other hand,there is no significant difference in corrosion rates between the samples treated by ACS and EPS techniques.The EPS technique that is safe,reusable and environmentally friendly can be further widely used in future work.
