Seasonal dynamics and impact factors of urban forest CO2 concentration in Harbin,China

CO2 concentrations in different plant communities （larch, birch, lilac, and grassland） were measured during the growing season in the Heilongjiang Forest Botanical Garden to study diurnal variation, seasonal and annual dynamics and factors that impact CO2 concentration in different spaces. CO2 concentration in different communities in green lands had an obvious diurnal variation, chronically decreasing, and temperature influenced the lilac area and the grassland. Seasonally, CO2 was lowest in the larch green land （344.03 ±23.03 μmol/mol） and highest in the grassland （360.13 ± 22.43 μmol/mol）. The overall trend in CO2 concentration was autumn 〉 spring 〉 summer; temperature is the main factor controlling variation in CO2 concentrations during the growing season; the CO2 concentration at the larch, birch, lilac, and grassland types of sites was negatively correlated with land surface temperature and air temperature, and the CO2 concentration at the larch and birch sites was positively correlated with atmospheric pressure. Without any obvious annual change law, further study and observation are needed.

Pore scale performance evaluation and impact factors in nitrogen huff-n-puff EOR for tight oil

Nitrogen huff-n-puff(N_(2)HnP) appears to be an economical and high-efficiency enhanced oil recovery(EOR) technique for tight oil reservoirs.There is however a lack of understanding of the pore-level EOR performance of N2HnP under tight reservoir conditions.In this work,a non-magnetic reactor was created and combined with a nuclear magnetic resonance(NMR) device for real-time monitoring of oil distribution in the HnP experiment.N_(2)HnP experiments were then performed in a tight sandstone core sample at a temperature of 353 K and an injection pressure≥ 24 MPa.The pore-level oil distribution under reservoir conditions was monitored and the EOR performance of N2HnP in specific pores was analyzed.The pore throat structures of the core sample and the phase behavior of the N_(2)-Oil system were analyzed to elucidate the EOR mechanism of N_(2)HnP.An oil recovery factor of 37.52% can be achieved after four cycles,which proves the EOR potential of N_(2)HnP for tight reservoirs.The highest recoveries after N_(2)HnP are obtained in the large pores,followed by the medium pores,the small pores,and finally the micro pores.Increases in soaking time and injection pressure resulted in slight and pronounced increases in oil recovery,respectively,both of which are mainly reflected in the first cycle.Specifically,increasing the soaking time only slightly improves the cumulative oil recovery in the small pores while increasing the injection pressure significantly improves the cumulative oil recovery in the small,medium,and large pores simultaneously.However,variations in both injection pressure and soaking time have a negligible effect on the cumulative oil recovery of the micro pores.

Bromate removal by activated carbon adsorption:material selection and impact factors study

Studies are conducted by using activated carbon process aimed at bromate removal from the raw water.Screening of activated carbon for bromate removal was performed in different activated carbons.GAC Merck possesses the highest iodine number and surface area,the highest number of basic groups and Vmeso,thereby contains the highest adsorption velocity and adsorption capacity.Impact factors of bromate removal on activated carbon were studied.Through static absorption experiments we studied the effect of adsorption time,pH,temperature,anions and organic matter on bromate removal.With the decrease of pH,removal of bromate enhanced,suggests that it may be possible to increase bromate reduction through pH control.The increase of temperature will be favorable to adsorption of bromate on activated carbon.Anions and organic matter can inhibit the adsorption of bromate on activated carbon through competing active sites.Bromate removal can be improved by controlling key water quality parameters.

Dietary Sodium Intake and Its Impact Factors in Adults of Shandong Province

Dietary sodium intake and its impact factors in 2 140 adults aged 18-69 years were analyzed. The mean daily sodium intake was 5 745.0 （5 427.6- 6 062.5） mg per day, which was higher in males than in females （P〈0.01）. After having been adjusted for gender, age and urban/city areas, the mean daily sodium intake was significantly higher in participants with a lower education level, drinkers and smokers than in those with a higher education level, nondrinkers and nonsmokers （P〈O.01）. The dietary sodium intake in adults of Shandong Province is higher than the recommended standards.

Changing Characteristics and Impact factors of Pan Evaporation in Benxi County

Based on data of monthly pan evaporation,temperature,precipitation,sunshine hours,wind speed,relative humidity,etc. in Benxi County during 1958-2012 from Meteorological Bureau of Benxi County,annual,seasonal and monthly changes and impact factors of pan evaporation in Benxi County in recent 55 years were analyzed. The results showed that annual evaporation in Benxi County showed a decreasing trend from 1958 to 2012,with the linear tendency rate of-12. 18 mm/10 a. Except that evaporation in spring decreased obviously,but evaporation in other seasons increased slightly in recent 55 years. Moreover,evaporation changes correlated with changes of average temperature,daily range of temperature,precipitation,sunshine hours,average wind speed and relative humidity,but the correlations between evaporation and each meteorological element were different in various seasons.

Impact factors and improvement measures of enviroment quality in cleaning operating room

Objective To analyze the factors that impact the environment quality of cleaning operating room and to discuss improvement measurement. Methods Environment bacteria testing results and prevalence of surgical incision infection in cleaning operating room were retro-

Impact factors identification of spatial heterogeneity of herbaceous plant diversity on five southern islands of Miaodao Archipelago in North China

Herbaceous plants are widely distributed on islands and where they exhibit spatial heterogeneity.Accurately identifying the impact factors that drive spatial heterogeneity can reveal typical island biodiversity patterns.Five southern islands in the Miaodao Archipelago,North China were studied herein.The spatial distribution of herbaceous plant diversity on these islands was analyzed,and the impact factors and their degree of impact on spatial heterogeneity were identified using CCA ordination and ANOVA.The results reveal 114 herbaceous plant species,belonging to 94 genera from 34 families in the50 plots sampled.The total species numbers on different islands were significantly positively correlated with island area,and the average a diversity was correlated with human activities,while the(3 diversity among islands was more affected by island area than mutual distances.Spatial heterogeneity within islands indicated that the diversities were generally high in areas with higher altitude,slope,total nitrogen,total carbon,and canopy density,and lower moisture content,pH,total phosphorus,total potassium,and aspect.Among the environmental factors,pH,canopy density,total K,total P,moisture content,altitude,and slope had significant gross effects,but only canopy density exhibited a significant net effect.Terrain affected diversity by restricting plantation,plantation in turn influenced soil properties and the two together affected diversity.Therefore,plantation was ultimately the fundamental driving factor for spatial heterogeneity in herbaceous plant diversity on the five islands.

Impact Factors of Energy Productivity in China: An Empirical Analysis

This article developed a decomposition model of energy productivity on the basis of the economic growth model. Four factors were considered which may influence China’s energy productivity according to this model: technology improvement, resource allocation structure, industrial structure and institute arrangement. Then, an econometric model was employed to test the four factors empirically on the basis of China’s statistical data from 1978 to 2004. Results indicated that capital deepening con- tributes the most (207%) to energy efficiency improvement, and impact from labor forces (13%) is the weakest one in resource factor; industrial structure (7%) and institute innovation (9.5%) positively improve the energy productivity.

Weight Analysis of Impact Factors of Interbedded Anti-Inclined Slopes Block-Flexure Toppling Based on Support Vector Regression

Block-flexure toppling failure is frequently encountered in interbedded anti-inclined rock(IAR)slopes,and seriously threatens the construction of hydropower infrastructure.In this study,we first investigated the Lean Reservoir area’s geological setting and the Linda landslide’s characteristics.Then,uniform design and random design were used to design 110 training datasets and 31 testing datasets,respectively.Afterwards,the toppling response was obtained by using the discrete element code.Finally,support vector regression was used to obtain the influence weights of 21 impact factors.The results show that the influence weight of the slope angle and rock formation dip angle on the toppling deformation among tertiary impact factors is 25.96%and 17.28%,respectively,which are much greater than the other 19 impact factors within the research range.For the primary impact factors,the influence weight is sorted from large to small as slope geometry parameters,joints parameters,and rock mechanics parameters.Joints parameters,especially the geometric parameters,cannot be ignored when evaluating the stability of IAR slopes.Through numerical simulation,it was qualitatively determined that failure surfaces of slopes were controlled by cross joints and that the rocks in the slope toe play a role in preventing slope deformation.

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

A novel approach for analyzing coupled vibrations between vehicles and bridges is presented,taking into account spatiotemporal effects and mechanical phenomena resulting fromvehicle braking.Efficient modeling and solution of bridge vibrations induced by vehicle deceleration are realized using this method.The method’s validity and reliability are substantiated through numerical examples.A simply supported beam bridge with a corrugated steel web is taken as an example and the effects of parameters such as the initial vehicle speed,braking acceleration,braking location,and road surface roughness on the mid-span displacement and impact factor of the bridge are analyzed.The results show that vehicle braking significantly amplifies mid-span displacement and impact factor responses in comparison to uniform vehicular motion across the bridge.Notably,the influence of wheelto-bridge friction forces is of particular significance and cannot be overlooked.When the vehicle initiates braking near the middle of the span,both the mid-span displacement and impact factor of the bridge exhibit substantial increases,further escalating with higher braking acceleration.Under favorable road surface conditions,the midspan displacement and the impact factor during vehicle braking may exceed the design values stipulated by codes.It is important to note that road surface roughness exerts a more pronounced effect on the impact factor of the bridge in comparison to the effects of vehicle braking.

A novel approach to the dynamic response analysis of Euler-Bernoulli beams resting on a Winkler soil model and subjected to impact loads

This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.

Impact factors of the degradation of bisphenol A by nitrocellulose membrane under illumination

Nitrocellulose membrane(NCM)can produce hydroxyl radicals under illumination,which promotes the oxidative degradation of organic pollutants.In this paper,NCM was used to oxidize bisphenol A(BPA)under simulated sunlight.The effects of p H,temperature,light intensity,anion and cation on the degradation of BPA were analyzed.The photodegradation process of BPA was discussed.The optimal photolysis rate was 0.031 min^(-)1 when the temperature was 30°C,the light intensity was 2.67×10^4 Lux,and the p H value was 9.0.The alkaline environment,temperature and light intensity can promote the photodegradation of BPA.Except for nitrate ions,anions and cations can inhibit the photodegradation of BPA.Compared with cations,anions have a greater inhibitory effect on BPA degradation.The degradation products of BPA by NCM were analyzed by gas chromatographic/mass.This study may provide useful information for the BPA degradation by NCM in complex water samples.

A Comparative Analysis of Chemical Properties and Factors Impacting Spring Sea Fog over the Northwestern South China Sea

In the present study,we analyzed the chemical properties and factors impacting the sea fog water during two sea fog events over the northwestern South China Sea in March 2017,and compared our results with those of other regions.The sea fog water during these two events were highly acidic and their average pH was below 3,which was related to the high initial acidifying potential and large amounts of NOand SOnot involved in the neutralization reaction.The dominant cations in the sea fog water were Naand NH.The primary anions in the sea fog water over the South China Sea were Cland NO,while that over the North Pacific Ocean was mainly SO,and ratios of the three fog water ions near the Donghai Island were similar.Ions in the sea fog water during the two events were mainly derived from marine aerosols,while the difference was that the first low-level sea fog airflow trajectory passed over Hainan Island.Therefore,the proportion of K+in the first sea fog was much higher than that in sea water and the second.Sulfate was the key to fog water nucleation,which made ion concentration in the sea fog water during the second event higher than that during the first.A decrease in average diameter during the first sea fog formation led to an ion concentration increase,while the average diameter of sea fog water during the second event was lower than that during the first,which corresponded with a moderate ion concentration increase.

Analysis of Air Pollution Impact Factors in China： A MIMIC Modeling Approach

In this study, we investigate the impact factors on air pollution in terms of CO2, SO2 and NOx emissions simultaneously in China and compare changes in air pollution across provinces from 1998 to 2011 using a Multiple Indicators and Multiple Causes Model （MIMIC） within a Structural Equation Model （SEM） framework. Our findings reveal that GDP per capita and total population have the largest impacts on air pollution, followed by energy intensity, foreign direct investment, population density, and industrialization. The results also reveal that the inverted U-shaped Environmental Kuznets Curve （EKC） hypothesis exists in China. Our findings also demonstrate that Shandong, Jiangxi and Liaoning are the top three provinces with the most deteriorated air quality while Xinjiang, Fujian and Ningxia are with the best. These results not only contribute to advancing the existing literature, but also merit particular attention from policy-makers in China.

Impact factors and dynamic simulation of tillage-layer temperature in frozen-thawed soil under different cover conditions

Based on a winter field experiment between 2016 and 2017,four treatments(bare land(BL),natural snowfall coverage(NS),5-cm-deep straw+natural snowfall coverage(SC5),and 10-cm-deep straw+natural snowfall coverage(SC10))were established to determine the effects of the different treatments on soil temperature at the soil surface and at depths of 10 cm,20 cm,and 30 cm.The environmental factors of ambient temperature,ambient humidity,water vapor pressure,10-min wind speed,total radiation,net radiation,and long wave radiation were obtained from the weather station in the study area.Through correlation,multiple regression,and stepwise regression analysis,models for dynamic simulation of the tillage-layer soil temperature were constructed for analyzing the relation between tillage-layer soil temperature and environmental factors.The results showed that the environmental factors were all significantly correlated with tillage-layer temperature at the 0.01 level;when the impacts of other environmental factors were excluded,the correlations decreased significantly.The dynamic simulation models for tillage-layer soil temperature under different coverage conditions were different,and the larger the coverage amount,the fewer the environmental factors that could affect the tillage-layer temperature.The coefficients of determination of the prediction results of the dynamic models for the tillage-layer soil temperature under the four treatments(BL,NS,SC5,and SC10)were 0.8385,0.7110,0.7283,and 0.6216,respectively.The prediction had a high accuracy and can accurately depict the dynamic changes of the tillage-layer soil temperature.The results provided a theoretical basis for the efficient utilization of farmland soil water and heat resources.

Key Impact Factors to Success of Forest Certification

Forest certification has developed very quickly across the world as one of the most important market initiative to promote sustainable forest management (SFM). Its success and effectiveness are influenced by some key factors, including credibility, cost effectiveness, certification standard, effectiveness, equitableness, government's role and laws/regulations framework. The paper analyzed these key factors to the success of forest certification and put forward relevant suggestions and advices for China to develop forest certification.

Analysis on Impact Factors for Forest Management Income of Forest Farmers in China

Based on the investigation in Anji County of Zhejiang Province and Ba'nan District of Chongqing, this paper analyzed the characteristics of forest management behaviors of forest farmers in China and the impact factors for forest management income, and then came up with some policy recommendations to increase the forest management income of forest farmers. It argued that the factors to impact on forest management income of forest farmers in China include the choice of forest products type, the elements in forest production and management, the development of forest products processing sector at regional level, and the government's forest management system. It is suggested that government promote the production of non-wood forest products, guide the forestry sector restructuring, reform the logging management system and forestry public finance and taxation system, regulate forest land transfer and foster forest products processing enterprises to increase the farmers' income forest management.

Factors Impacting Teacher Stress and Mitigation of This Stress in UK School System

Teacher plays an essential role in the lives of children.In addition to promoting their learning and improving academic performance,teachers have a major character in developing student’s creative potential and growing into responsible citizens.However,in recent years,a report by National Foundation for Educational(2019)claimed that the teacher has faced many challenges than other occupations.Stress is one of the most challenges for the teacher to overcome.The main sources of teacher stress generally come from personal,interpersonal as well as organization.This essay explores and discusses the factors that impact or affect teacher stress,exploring the theories and concepts associated with teacher stress and mitigation practices for teacher stress in the United Kingdom school system-from primary and secondary school.

DYNAMIC STRESS INTENSITY FACTORS AROUND TWO CRACKS NEAR AN INTERFACE OF TWO DISSIMILAR ELASTIC HALF－PLANES UNDER IN－PLANE SHEAR IMPACT LOAD

Transient stresses around two collinear cracks which lie in parallel with theinterface of the two dissimilar half-planes are studied in this article.The surfaces ofthe cracks are sheared suddenly. Application of the Fourier and Laplace transforms technique reduces the problem to that of solving dual integrai equations.To solvethese,the differences of.the crack surface displacements are expanded in a series offunctions which are automatically zero outside of the cracks. The unknown coefficients accompanied in the series are determined by the Schmidt method. The stress intensity .factors are defined in the Laplace transform domain and these are inverted numerically in the physical space .As an example ,the dynamic stress intensity factors around two cracks in a ceramic and steel bonded composite are numerically calculated.