Impulse waves that are generated by landslides in narrow reservoir areas threaten the stability of buildings and bank slopes.To discuss the action process and evolution law of the wave pressure on bank slopes,a three-...Impulse waves that are generated by landslides in narrow reservoir areas threaten the stability of buildings and bank slopes.To discuss the action process and evolution law of the wave pressure on bank slopes,a three-dimensional physical model test that considers impulse waves generated by landslides was performed,and factors including landslide width,thickness,slope angles of the sliding surface,and bank slope angle were considered.Based on wave forms on the bank slopes,wave pressure curve characteristics,and peak value,the action process of wave pressure could be divided into the following stages:maximum pulsating pressure stage,wave impact stage(when waves break),and stationary pulsation stage.It was found that wave breaking is dependent on the value of the surf similarity parameterξ.The distribution pattern of impact pressure decays linearly on both sides of the maximum impact pressure point,and the attenuation degree decreases when it attains 40%of the maximum value.Thus,it is proposed that the prediction formula for the maximum effective impact pressure of the bank slope be related to the reciprocal of wave steepness,relative water depth,and slope rate.The prediction formula provides strong theoretical support for early safety warning and for predicting the bank slope under impulse waves generated by landslides.展开更多
The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow c...The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow control system,has received less attention in research on the impact process of debris flow and check dams compared to solid check dams.Additionally,the estimation of impact pressure in debris flow primarily considers debris flow characteristics,without taking into account the influence of geometric characteristics of the transmission structure.To better understand the impact process of debris flow on beam dams,a series of small-scale debris flow impact tests were conducted in a model flume.Key parameters,including velocity,depth,and impact pressure,were measured.The results show that the maximum impact pressure of debris flow is affected by both the characteristics of the debris flow and the relative opening size of the beam dam.Due to flow and edge occlusion in the middle of the beam dam,the discharge of debris flow is enhanced,resulting in a longer impact process and higher maximum impact pressure.Based on these findings,a calculation model of the maximum impact pressure of debris flow at the midpoint of the middle beam is proposed,which can be used to estimate the impact of debris flow on the discharge part of the beam dam.展开更多
This paper presents the results of comparison of impact pressures on open-plied structures induced by regular waves and irregular waves in a laboratory channel. Regular waves with wave heights ranging from 0.1~0.2 m ...This paper presents the results of comparison of impact pressures on open-plied structures induced by regular waves and irregular waves in a laboratory channel. Regular waves with wave heights ranging from 0.1~0.2 m and periods ranging from 1.0~2.0 s are tested. The target spectrum for the irregular wave is JONSWAP spectrum. Irregular waves with significant wave heights in the range of 0.10~0.25 m and peak periods in the range of 1.0~2.0 s are tested. The relative clearance s/H 1/3(H) is between -0.1 and 0.4, s being the subface level of structure model above the still water level. Time series of impact pressure are analyzed to indicate whether the property of impact pressures induced by the regular wave significantly deviates from that by the irregular wave. The distribution of the impact pressure along the underside of the structure is compared for different types of incident waves. The effects of wave parameters, structure dimension and structure clearance on the impact pressure are also discussed.展开更多
Liquid sloshing phenomena in No.2 tank of 140 km 3 liquefied natural gas (LNG) carriers have been studied numerically and experimentally.The scale of the model tank was selected as 1/55.9.Roll and pitch motions were t...Liquid sloshing phenomena in No.2 tank of 140 km 3 liquefied natural gas (LNG) carriers have been studied numerically and experimentally.The scale of the model tank was selected as 1/55.9.Roll and pitch motions were tested.For measuring impact pressures,seventeen pressure sensors were installed on the tank model.A large number of excitation frequencies and filling heights were investigated.The experimental results showed that when the frequency of tank motion is close to the natural frequency of fluid inside the tank,large impact pressures may be caused.Resonance frequencies and maximum impact pressures of different filling height were presented.Among all the experimental situations,the maximum impact pressure always occurs at the place near 70% height of tank where should be especially concerned.A computational fluid dynamics (CFD) model was developed to simulate the sloshing in the tank.The model was based on the Reynolds-averaged Navier-Stokes (RANS) equations,with a standard κ-ε turbulence model.The volume of fluid (VOF) method was used to predict free surface elevations.Dynamic mesh technique was used to update the volume mesh.Computations for pressure time histories and peak pressures were compared to experimental results.Good agreement was observed.展开更多
The research of reliability design for impact vibration of hydraulic pressure pipeline systems is still in the primary stage,and the research of quantitative reliability of hydraulic components and system is still inc...The research of reliability design for impact vibration of hydraulic pressure pipeline systems is still in the primary stage,and the research of quantitative reliability of hydraulic components and system is still incomplete.On the condition of having obtained the numerical characteristics of basic random parameters,several techniques and methods including the probability statistical theory,hydraulic technique and stochastic perturbation method are employed to carry out the reliability design for impact vibration of the hydraulic pressure system.Considering the instantaneous pressure pulse of hydraulic impact in pipeline,the reliability analysis model of hydraulic pipeline system is established,and the reliability-based optimization design method is presented.The proposed method can reflect the inherent reliability of hydraulic pipe system exactly,and the desired result is obtained.The reliability design of hydraulic pipeline system is achieved by computer programs and the reliability design information of hydraulic pipeline system is obtained.This research proposes a reliability design method,which can solve the problem of the reliability-based optimization design for the hydraulic pressure system with impact vibration practically and effectively,and enhance the quantitative research on the reliability design of hydraulic pipeline system.The proposed method has generality for the reliability optimization design of hydraulic pipeline system.展开更多
Rocky landslides on river banks can result in the generation of ultra-high waves,which may destroy structures on the opposite bank.Existing methods to calculate the pressure on bank slopes under the effect of impulse ...Rocky landslides on river banks can result in the generation of ultra-high waves,which may destroy structures on the opposite bank.Existing methods to calculate the pressure on bank slopes under the effect of impulse waves generated by landslides are,however,few and of low precision.Therefore,in this study,a three-dimensional physical model test was conducted by taking into account factors such as landslide geometry parameters and the bank slope angle.The model test section was generalized on the basis of a certain section of the Three Gorges reservoir area as a prototype,after which the wave parameters and wave pressure acting on the bank slope were measured.Subsequently,the magnitude,acting point,and distribution of the pressure of the impulse waves generated by the rocky landslide upon the bank slope were determined.The distribution curve of the impact pressure was similar to that calculated using theСНиПⅡ57-75 formula,and the experimental pulsating pressure value was close to the value calculated using the Subgrade formula.Based on the test results,a power function of the relative pulsating pressure steepness with respect to the reciprocal of the wave steepness,relative water depth,and slope ratio was proposed.The acting point of the maximum pulsating pressure was found to be located near the still water level.Finally,an empirical formula for calculating the envelope of the maximum pulsating pressure distribution curve was proposed.These formulas can serve as a theoretical basis for the prediction of impulse wave pressure generated owing to landslides on bank slopes.展开更多
The moving particle semi-implicit(MPS)method has demonstrated its usefulness in practical engineering applications.Although it has wide applicability,it is still hard to predict the pressure precisely using the MPS ...The moving particle semi-implicit(MPS)method has demonstrated its usefulness in practical engineering applications.Although it has wide applicability,it is still hard to predict the pressure precisely using the MPS method.A pressure-convection particle method based on the MPS method is proposed to overcome this problem.The improved performance of this new method is validated with computational and measured results.The approach is also applied to compute the problem of sloshing associated with floating body motion in waves.The pressure-convection MPS method demonstrated its capability to improve the prediction of pressure.展开更多
Impact pressuring diffusion bonding tests were carried out to produce joint between TA17 titanium alloy and 0Cr18Ni9Ti stainless steel. The reaction products and microstructure near the bonding interface were analyzed...Impact pressuring diffusion bonding tests were carried out to produce joint between TA17 titanium alloy and 0Cr18Ni9Ti stainless steel. The reaction products and microstructure near the bonding interface were analyzed. The diffusion of Fe, Cr, Ni and Ti in the bond was revealed by energy dispersive spectroscopy. A number of phases, such as β-Ti, Fe2Ti and σ phases were identified by X-ray diffraction. It was concluded that the bonded joint broke in the region somewhere between Fe-Ti intermetallics and β-Ti during tensile loading. The relationship between bonding parameters and tensile strength of the joint was also determined experimentally, and the optimum time of bonding was only 220 s with 293 MPa joint strength.展开更多
Due to high ground stress and mining disturbance, the deformation and failure of deep soft rock roadway is serious, and invalidation of the anchor net-anchor cable supporting structure occurs. The failure characterist...Due to high ground stress and mining disturbance, the deformation and failure of deep soft rock roadway is serious, and invalidation of the anchor net-anchor cable supporting structure occurs. The failure characteristics of roadways revealed with the help of the ground pressure monitoring. Theoretical analysis was adopted to analyze the influence of mining disturbance on stress distribution in surrounding rock,and the change of stress was also calculated. Considering the change of stress in surrounding rock of bottom extraction roadway, the displacement, plastic zone and distribution law of principal stress difference under different support schemes were studied by means of FLAC3D. The supporting scheme of U-shaped steel was proposed for bottom extraction roadway that underwent mining disturbance. We carried out a similarity model test to verify the effect of support in dynamic pressure. Monitoring results demonstrated the change rules of deformation and stress of surrounding rock in different supporting schemes. The supporting scheme of U-shaped steel had an effective control on deformation of surrounding rock. The scheme was successfully applied in underground engineering practice, and achieved good technical and economic benefits.展开更多
Fluid percussion-induced traumatic brain injury models have been widely used in experimental research for years. In an experiment, the stability of impaction is inevitably affected by factors such as the appearance of...Fluid percussion-induced traumatic brain injury models have been widely used in experimental research for years. In an experiment, the stability of impaction is inevitably affected by factors such as the appearance of liquid spikes. Management of impact pressure is a crucial factor that determines the stability of these models, and direction of impact control is another basic element. To improve experimental stability, we calculated a pressure curve by generating repeated impacts using a fluid percussion device at different pendulum angles. A stereotactic frame was used to control the direction of impact. We produced stable and reproducible models, including mild, moderate, and severe traumatic brain injury, using the MODEL01-B device at pendulum angles of 6°, 11° and 13°, with corresponding impact force values of 1.0 ± 0.11 atm(101.32 ± 11.16 k Pa), 2.6 ± 0.16 atm(263.44 ± 16.21 k Pa), and 3.6 ± 0.16 atm(364.77 ± 16.21 k Pa), respectively. Behavioral tests, hematoxylin-eosin staining, and magnetic resonance imaging revealed that models for different degrees of injury were consistent with the clinical properties of mild, moderate, and severe craniocerebral injuries. Using this method, we established fluid percussion models for different degrees of injury and stabilized pathological features based on precise power and direction control.展开更多
Nowadays,an increasing number of ships and marine structures are manufactured and inevitably operated in rough sea.As a result,some phenomena related to the violent fluid-elastic structure interactions(e.g.,hydrodynam...Nowadays,an increasing number of ships and marine structures are manufactured and inevitably operated in rough sea.As a result,some phenomena related to the violent fluid-elastic structure interactions(e.g.,hydrodynamic slamming on marine vessels,tsunami impact on onshore structures,and sloshing in liquid containers)have aroused huge challenges to ocean engineering fields.In this paper,the moving particle semi-implicit(MPS)method and finite element method(FEM)coupled method is proposed for use in numerical investigations of the interaction between a regular wave and a horizontal suspended structure.The fluid domain calculated by the MPS method is dispersed into fluid particles,and the structure domain solved by the FEM method is dispersed into beam elements.The generation of the 2D regular wave is firstly conducted,and convergence verification is performed to determine appropriate particle spacing for the simulation.Next,the regular wave interacting with a rigid structure is initially performed and verified through the comparison with the laboratory experiments.By verification,the MPS-FEM coupled method can be applied to fluid-structure interaction(FSI)problems with waves.On this basis,taking the flexibility of structure into consideration,the elastic dynamic response of the structure subjected to the wave slamming is investigated,including the evolutions of the free surface,the variation of the wave impact pressures,the velocity distribution,and the structural deformation response.By comparison with the rigid case,the effects of the structural flexibility on wave-elastic structure interaction can be obtained.展开更多
Objective To investigate the impacts of blood pressure control on coronary flow reserve(CFR)in hypertensive patients.Methods A total of 236 patients without significant coronary stenosis(defined as<50%luminal narro...Objective To investigate the impacts of blood pressure control on coronary flow reserve(CFR)in hypertensive patients.Methods A total of 236 patients without significant coronary stenosis(defined as<50%luminal narrowing confirmed by coronary angiography or coronary artery CT scan)between January 2011 and July 2015were retrospectively enrolled in this study.CFR展开更多
The impact pressure from waves is an important issue to be considered in the design of coastal structures. In this paper, the waves acting on the deck of a shore-connecting jetty on a slope exposed to oblique waves an...The impact pressure from waves is an important issue to be considered in the design of coastal structures. In this paper, the waves acting on the deck of a shore-connecting jetty on a slope exposed to oblique waves and in the presence of current are examined based on laboratory experiments. The impact pressures are measured on a 1:50 scale model of a jetty head with down-standing beams and berthing members. The relations of the impact pressure with the incident wave angle and the current velocity are examined. It is shown that the impact pressure is sensitive to the wave angle and the current velocity. A computational model for the impact load on the deck of shore-connecting jetties exposed to oblique waves and current is developed.展开更多
This paper presents a comparative study of a meshless level-set method in the simulation of sloshing flows. The numerical moving particle semi-implicit (MPS) method and a grid based schemes of the MPS and level-set ...This paper presents a comparative study of a meshless level-set method in the simulation of sloshing flows. The numerical moving particle semi-implicit (MPS) method and a grid based schemes of the MPS and level-set methods are outlined and two violent sloshing cases are considered. The computed results are compared with the corresponding experimental data for validation. The impact pressure and the deformations of free surface induced by sloshing are comparatively analyzed, and are in good agreement with experimental ones. Results show that both the MPS and level-set methods are good tools for simulation of violent sloshing flows. However, the second pressure peaks as well as breaking and splashing of free surface by the MPS method are captured better than by the level-set method.展开更多
A numerical study on violent liquid sloshing phenomenon in a partially filled rectangular container is carried out by using moving particle semi-implicit(MPS) method. The present study deals with the implementation ...A numerical study on violent liquid sloshing phenomenon in a partially filled rectangular container is carried out by using moving particle semi-implicit(MPS) method. The present study deals with the implementation of five modifications all together over the original MPS method. The modifications include improved source terms for pressure Poisson equation, special approximation technique for the representation of gradient differential operator, collective action of mixed free surface particle identification boundary conditions, effecting Neumann boundary condition on solving the PPE and fixing judiciously the parting distance among particles to prevent collision. The suitability of the kernel function used in the original MPS method along with these five modifications is investigated for violent sloshing problems. The present model ensures a good agreement between numerical results with the existing experimental observations. The model is successfully applied to a partially filled tank undergoing horizontal sinusoidal excitation to compute the sloshing wave amplitudes and pressure on tank walls. The assessment of dynamic behaviour manifested in terms of base shear, overturning moment and impact pressure load exerted on tank ceiling induced by violent sloshing motion using MPS method is not reported in the open literature and has been efficiently carried out in the present study.展开更多
On 18 January 2017 a catastrophic avalanche destroyed the Rigopiano Gran Sasso Resort&Wellness(Rigopiano Hotel)in the Gran Sasso National Park in Italy,with 40 people trapped and a death toll of 29.This article de...On 18 January 2017 a catastrophic avalanche destroyed the Rigopiano Gran Sasso Resort&Wellness(Rigopiano Hotel)in the Gran Sasso National Park in Italy,with 40 people trapped and a death toll of 29.This article describes the location of the disaster and the general meteorological scenario,with field investigations to provide insight on the avalanche dynamics and its interaction with the hotel buildings.The data gathered in situ suggest that the avalanche was a fluidized dry snow avalanche,which entrained a sligthtly warmer snow cover along the path and reached extremely long runout distances with braking effect from mountain forests.The avalanche that reached the Rigopiano area was a‘‘wood-snow’’avalanche—a mixture of snow and uprooted and crushed trees,rocks,and other debris.There were no direct eyewitnesses at the event,and a quick post-event survey used a numerical model to analyze the dynamics of the event to estimate the pressure,velocity,and direction of the natural flow and the causes for the destruction of the hotel.Considering the magnitude and the damage caused by the event,the avalanche was at a high to very high intensity scale.展开更多
基金funded by Chongqing Municipal Education Commission Project under Grant No.KJQN202000747the National Key Research and Development Program Project NO.2018YFB1600400+2 种基金the China Postdoctoral Science Foundation funded project grant No.2019M663890XBChongqing Postdoctoral Science Foundation funded project Grant No.228512Natural Science Foundation of Chongqing No.cstc2019jcyj-msxmX0599.
文摘Impulse waves that are generated by landslides in narrow reservoir areas threaten the stability of buildings and bank slopes.To discuss the action process and evolution law of the wave pressure on bank slopes,a three-dimensional physical model test that considers impulse waves generated by landslides was performed,and factors including landslide width,thickness,slope angles of the sliding surface,and bank slope angle were considered.Based on wave forms on the bank slopes,wave pressure curve characteristics,and peak value,the action process of wave pressure could be divided into the following stages:maximum pulsating pressure stage,wave impact stage(when waves break),and stationary pulsation stage.It was found that wave breaking is dependent on the value of the surf similarity parameterξ.The distribution pattern of impact pressure decays linearly on both sides of the maximum impact pressure point,and the attenuation degree decreases when it attains 40%of the maximum value.Thus,it is proposed that the prediction formula for the maximum effective impact pressure of the bank slope be related to the reciprocal of wave steepness,relative water depth,and slope rate.The prediction formula provides strong theoretical support for early safety warning and for predicting the bank slope under impulse waves generated by landslides.
基金jointly funded by the National Natural Science Foundation of China(Grant No.42201095)the Natural Science Foundation of Sichuan(Grant No.2022NSFSC1032)。
文摘The use of open-type check dams in mountainous areas has become common practice in order to mitigate the effects of debris flow and extend the service life of engineering structures.The beam dam,a common debris flow control system,has received less attention in research on the impact process of debris flow and check dams compared to solid check dams.Additionally,the estimation of impact pressure in debris flow primarily considers debris flow characteristics,without taking into account the influence of geometric characteristics of the transmission structure.To better understand the impact process of debris flow on beam dams,a series of small-scale debris flow impact tests were conducted in a model flume.Key parameters,including velocity,depth,and impact pressure,were measured.The results show that the maximum impact pressure of debris flow is affected by both the characteristics of the debris flow and the relative opening size of the beam dam.Due to flow and edge occlusion in the middle of the beam dam,the discharge of debris flow is enhanced,resulting in a longer impact process and higher maximum impact pressure.Based on these findings,a calculation model of the maximum impact pressure of debris flow at the midpoint of the middle beam is proposed,which can be used to estimate the impact of debris flow on the discharge part of the beam dam.
文摘This paper presents the results of comparison of impact pressures on open-plied structures induced by regular waves and irregular waves in a laboratory channel. Regular waves with wave heights ranging from 0.1~0.2 m and periods ranging from 1.0~2.0 s are tested. The target spectrum for the irregular wave is JONSWAP spectrum. Irregular waves with significant wave heights in the range of 0.10~0.25 m and peak periods in the range of 1.0~2.0 s are tested. The relative clearance s/H 1/3(H) is between -0.1 and 0.4, s being the subface level of structure model above the still water level. Time series of impact pressure are analyzed to indicate whether the property of impact pressures induced by the regular wave significantly deviates from that by the irregular wave. The distribution of the impact pressure along the underside of the structure is compared for different types of incident waves. The effects of wave parameters, structure dimension and structure clearance on the impact pressure are also discussed.
文摘Liquid sloshing phenomena in No.2 tank of 140 km 3 liquefied natural gas (LNG) carriers have been studied numerically and experimentally.The scale of the model tank was selected as 1/55.9.Roll and pitch motions were tested.For measuring impact pressures,seventeen pressure sensors were installed on the tank model.A large number of excitation frequencies and filling heights were investigated.The experimental results showed that when the frequency of tank motion is close to the natural frequency of fluid inside the tank,large impact pressures may be caused.Resonance frequencies and maximum impact pressures of different filling height were presented.Among all the experimental situations,the maximum impact pressure always occurs at the place near 70% height of tank where should be especially concerned.A computational fluid dynamics (CFD) model was developed to simulate the sloshing in the tank.The model was based on the Reynolds-averaged Navier-Stokes (RANS) equations,with a standard κ-ε turbulence model.The volume of fluid (VOF) method was used to predict free surface elevations.Dynamic mesh technique was used to update the volume mesh.Computations for pressure time histories and peak pressures were compared to experimental results.Good agreement was observed.
基金supported by National Natural Science Foundation of China(Grant Nos.5113500310972088)
文摘The research of reliability design for impact vibration of hydraulic pressure pipeline systems is still in the primary stage,and the research of quantitative reliability of hydraulic components and system is still incomplete.On the condition of having obtained the numerical characteristics of basic random parameters,several techniques and methods including the probability statistical theory,hydraulic technique and stochastic perturbation method are employed to carry out the reliability design for impact vibration of the hydraulic pressure system.Considering the instantaneous pressure pulse of hydraulic impact in pipeline,the reliability analysis model of hydraulic pipeline system is established,and the reliability-based optimization design method is presented.The proposed method can reflect the inherent reliability of hydraulic pipe system exactly,and the desired result is obtained.The reliability design of hydraulic pipeline system is achieved by computer programs and the reliability design information of hydraulic pipeline system is obtained.This research proposes a reliability design method,which can solve the problem of the reliability-based optimization design for the hydraulic pressure system with impact vibration practically and effectively,and enhance the quantitative research on the reliability design of hydraulic pipeline system.The proposed method has generality for the reliability optimization design of hydraulic pipeline system.
基金financial support from the National Natural Science Foundation of China(Grant No.51479015)the Chongqing Research Program of Basic Research and Frontier Technology(Grant No.cstc2017 jcyj BX0070)+6 种基金the Chongqing Science and Technology Commission of China(Grant No.cstc2017jcyj A1642)the Technology innovation and application demonstration project in Chongqing(Grant No.cstc2018jscx-msyb0328)the Chongqing,the Chongqing Municipal Education Commission of China(Grant No.KJ1705123)the China Postdoctoral Science Foundation funded project(Grant No.2019M663890XB)Chongqing Postdoctoral Science Foundation funded project(Grant No.228512)Chongqing Municipal Education Commission Effects of Global Warming on Extreme Weather Events in Chongqing(Grant No.KJQN201800711)Chongqing Municipal Education Commission Project(Grant No.KJQN202000747)。
文摘Rocky landslides on river banks can result in the generation of ultra-high waves,which may destroy structures on the opposite bank.Existing methods to calculate the pressure on bank slopes under the effect of impulse waves generated by landslides are,however,few and of low precision.Therefore,in this study,a three-dimensional physical model test was conducted by taking into account factors such as landslide geometry parameters and the bank slope angle.The model test section was generalized on the basis of a certain section of the Three Gorges reservoir area as a prototype,after which the wave parameters and wave pressure acting on the bank slope were measured.Subsequently,the magnitude,acting point,and distribution of the pressure of the impulse waves generated by the rocky landslide upon the bank slope were determined.The distribution curve of the impact pressure was similar to that calculated using theСНиПⅡ57-75 formula,and the experimental pulsating pressure value was close to the value calculated using the Subgrade formula.Based on the test results,a power function of the relative pulsating pressure steepness with respect to the reciprocal of the wave steepness,relative water depth,and slope ratio was proposed.The acting point of the maximum pulsating pressure was found to be located near the still water level.Finally,an empirical formula for calculating the envelope of the maximum pulsating pressure distribution curve was proposed.These formulas can serve as a theoretical basis for the prediction of impulse wave pressure generated owing to landslides on bank slopes.
基金supported by the Science Council under grant No.NSC94-2611-E-002-016
文摘The moving particle semi-implicit(MPS)method has demonstrated its usefulness in practical engineering applications.Although it has wide applicability,it is still hard to predict the pressure precisely using the MPS method.A pressure-convection particle method based on the MPS method is proposed to overcome this problem.The improved performance of this new method is validated with computational and measured results.The approach is also applied to compute the problem of sloshing associated with floating body motion in waves.The pressure-convection MPS method demonstrated its capability to improve the prediction of pressure.
基金National Natural Science Foundation of China (No.50675234)
文摘Impact pressuring diffusion bonding tests were carried out to produce joint between TA17 titanium alloy and 0Cr18Ni9Ti stainless steel. The reaction products and microstructure near the bonding interface were analyzed. The diffusion of Fe, Cr, Ni and Ti in the bond was revealed by energy dispersive spectroscopy. A number of phases, such as β-Ti, Fe2Ti and σ phases were identified by X-ray diffraction. It was concluded that the bonded joint broke in the region somewhere between Fe-Ti intermetallics and β-Ti during tensile loading. The relationship between bonding parameters and tensile strength of the joint was also determined experimentally, and the optimum time of bonding was only 220 s with 293 MPa joint strength.
基金financial assistance provided by the National Natural Science Foundation of China (Nos. 51322401, 51404262, 51579239, 51574223)Shandong Provincial Key Laboratory of Depositional Mineralization & Sedimentary Minerals (Shandong University of Science and Technology) of China (No. CDPM2014KF03)+1 种基金China Postdoctoral Science Foundation (Nos. 2015M580493, 2014M551700, 2013M531424)the Natural Science Foundation of Jiangsu Province of China (No. BK20140213)
文摘Due to high ground stress and mining disturbance, the deformation and failure of deep soft rock roadway is serious, and invalidation of the anchor net-anchor cable supporting structure occurs. The failure characteristics of roadways revealed with the help of the ground pressure monitoring. Theoretical analysis was adopted to analyze the influence of mining disturbance on stress distribution in surrounding rock,and the change of stress was also calculated. Considering the change of stress in surrounding rock of bottom extraction roadway, the displacement, plastic zone and distribution law of principal stress difference under different support schemes were studied by means of FLAC3D. The supporting scheme of U-shaped steel was proposed for bottom extraction roadway that underwent mining disturbance. We carried out a similarity model test to verify the effect of support in dynamic pressure. Monitoring results demonstrated the change rules of deformation and stress of surrounding rock in different supporting schemes. The supporting scheme of U-shaped steel had an effective control on deformation of surrounding rock. The scheme was successfully applied in underground engineering practice, and achieved good technical and economic benefits.
基金supported by a grant from the International S cience and Technology Cooperation Projects of China,No.2011DFG33430
文摘Fluid percussion-induced traumatic brain injury models have been widely used in experimental research for years. In an experiment, the stability of impaction is inevitably affected by factors such as the appearance of liquid spikes. Management of impact pressure is a crucial factor that determines the stability of these models, and direction of impact control is another basic element. To improve experimental stability, we calculated a pressure curve by generating repeated impacts using a fluid percussion device at different pendulum angles. A stereotactic frame was used to control the direction of impact. We produced stable and reproducible models, including mild, moderate, and severe traumatic brain injury, using the MODEL01-B device at pendulum angles of 6°, 11° and 13°, with corresponding impact force values of 1.0 ± 0.11 atm(101.32 ± 11.16 k Pa), 2.6 ± 0.16 atm(263.44 ± 16.21 k Pa), and 3.6 ± 0.16 atm(364.77 ± 16.21 k Pa), respectively. Behavioral tests, hematoxylin-eosin staining, and magnetic resonance imaging revealed that models for different degrees of injury were consistent with the clinical properties of mild, moderate, and severe craniocerebral injuries. Using this method, we established fluid percussion models for different degrees of injury and stabilized pathological features based on precise power and direction control.
基金supported by the National Natural Science Foundation of China(51879159,51490675,11432009,and 51579145)Chang Jiang Scholars Program(T2014099)+3 种基金Shanghai Excellent Academic Leaders Program(17XD1402300)Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning(2013022)Innovative Special Project of Numerical Tank of Ministry of Industry and Information Technology of China(2016-23/09)Lloyd’s Register Foundation for doctoral student
文摘Nowadays,an increasing number of ships and marine structures are manufactured and inevitably operated in rough sea.As a result,some phenomena related to the violent fluid-elastic structure interactions(e.g.,hydrodynamic slamming on marine vessels,tsunami impact on onshore structures,and sloshing in liquid containers)have aroused huge challenges to ocean engineering fields.In this paper,the moving particle semi-implicit(MPS)method and finite element method(FEM)coupled method is proposed for use in numerical investigations of the interaction between a regular wave and a horizontal suspended structure.The fluid domain calculated by the MPS method is dispersed into fluid particles,and the structure domain solved by the FEM method is dispersed into beam elements.The generation of the 2D regular wave is firstly conducted,and convergence verification is performed to determine appropriate particle spacing for the simulation.Next,the regular wave interacting with a rigid structure is initially performed and verified through the comparison with the laboratory experiments.By verification,the MPS-FEM coupled method can be applied to fluid-structure interaction(FSI)problems with waves.On this basis,taking the flexibility of structure into consideration,the elastic dynamic response of the structure subjected to the wave slamming is investigated,including the evolutions of the free surface,the variation of the wave impact pressures,the velocity distribution,and the structural deformation response.By comparison with the rigid case,the effects of the structural flexibility on wave-elastic structure interaction can be obtained.
文摘Objective To investigate the impacts of blood pressure control on coronary flow reserve(CFR)in hypertensive patients.Methods A total of 236 patients without significant coronary stenosis(defined as<50%luminal narrowing confirmed by coronary angiography or coronary artery CT scan)between January 2011 and July 2015were retrospectively enrolled in this study.CFR
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.2009B10614)the National Key Techonology Research and Development Program(Grant No.2012BAB03B00)the National Natural Science Foundation of China(Grant No.51339005)
文摘The impact pressure from waves is an important issue to be considered in the design of coastal structures. In this paper, the waves acting on the deck of a shore-connecting jetty on a slope exposed to oblique waves and in the presence of current are examined based on laboratory experiments. The impact pressures are measured on a 1:50 scale model of a jetty head with down-standing beams and berthing members. The relations of the impact pressure with the incident wave angle and the current velocity are examined. It is shown that the impact pressure is sensitive to the wave angle and the current velocity. A computational model for the impact load on the deck of shore-connecting jetties exposed to oblique waves and current is developed.
基金supported by the National Natural Science Foundation of China(Grant Nos.51379125,51411130131 and 11272120)the National Key Basic Research Development of China(973 Program,Grant No.2013CB036103)+1 种基金the High Te-chnology of Marine Research Project of the Ministry of Indu-stry and the Information Technology of Chinathe Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning(Grant No.2013022)
文摘This paper presents a comparative study of a meshless level-set method in the simulation of sloshing flows. The numerical moving particle semi-implicit (MPS) method and a grid based schemes of the MPS and level-set methods are outlined and two violent sloshing cases are considered. The computed results are compared with the corresponding experimental data for validation. The impact pressure and the deformations of free surface induced by sloshing are comparatively analyzed, and are in good agreement with experimental ones. Results show that both the MPS and level-set methods are good tools for simulation of violent sloshing flows. However, the second pressure peaks as well as breaking and splashing of free surface by the MPS method are captured better than by the level-set method.
基金project SR/S3/MERC0078/2010 funded by Department of Science and Technology, Government of India under its R & D schemethe intense support of DST, New Delhi
文摘A numerical study on violent liquid sloshing phenomenon in a partially filled rectangular container is carried out by using moving particle semi-implicit(MPS) method. The present study deals with the implementation of five modifications all together over the original MPS method. The modifications include improved source terms for pressure Poisson equation, special approximation technique for the representation of gradient differential operator, collective action of mixed free surface particle identification boundary conditions, effecting Neumann boundary condition on solving the PPE and fixing judiciously the parting distance among particles to prevent collision. The suitability of the kernel function used in the original MPS method along with these five modifications is investigated for violent sloshing problems. The present model ensures a good agreement between numerical results with the existing experimental observations. The model is successfully applied to a partially filled tank undergoing horizontal sinusoidal excitation to compute the sloshing wave amplitudes and pressure on tank walls. The assessment of dynamic behaviour manifested in terms of base shear, overturning moment and impact pressure load exerted on tank ceiling induced by violent sloshing motion using MPS method is not reported in the open literature and has been efficiently carried out in the present study.
文摘On 18 January 2017 a catastrophic avalanche destroyed the Rigopiano Gran Sasso Resort&Wellness(Rigopiano Hotel)in the Gran Sasso National Park in Italy,with 40 people trapped and a death toll of 29.This article describes the location of the disaster and the general meteorological scenario,with field investigations to provide insight on the avalanche dynamics and its interaction with the hotel buildings.The data gathered in situ suggest that the avalanche was a fluidized dry snow avalanche,which entrained a sligthtly warmer snow cover along the path and reached extremely long runout distances with braking effect from mountain forests.The avalanche that reached the Rigopiano area was a‘‘wood-snow’’avalanche—a mixture of snow and uprooted and crushed trees,rocks,and other debris.There were no direct eyewitnesses at the event,and a quick post-event survey used a numerical model to analyze the dynamics of the event to estimate the pressure,velocity,and direction of the natural flow and the causes for the destruction of the hotel.Considering the magnitude and the damage caused by the event,the avalanche was at a high to very high intensity scale.