Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials,but they can easily cause stress shielding due to the significant ...Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials,but they can easily cause stress shielding due to the significant difference in elastic modulus between the implant and human bones.The elastic modulus of porous metals is lower than that of dense metals.Therefore,it is possible to adjust the pore parameters to make the elastic modulus of porous metals match or be comparable with that of the bone tissue.At the same time,the open porous metals with pores connected to each other could provide the structural condition for bone ingrowth,which is helpful in strengthening the biological combination of bone tissue with the implants.Therefore,the preparation technologies of porous metal implants and related research have been drawing more and more attention due to the excellent features of porous metals.Selective laser melting(SLM)and electron beam melting technology(EBM)are important research fields of additive manufacturing.They have the advantages of directly forming arbitrarily complex shaped metal parts which are suitable for the preparation of porous metal implants with complex shape and fine structure.As new manufacturing technologies,the applications of SLM and EBM for porous metal implants have just begun.This paper aims to understand the technology status of SLM and EBM,the research progress of porous metal implants preparation by using SLM and EBM,and the biological compatibility of the materials,individual design and manufacturing requirements.The existing problems and future research directions for porous metal implants prepared by SLM and EBM methods are discussed in the last paragraph.展开更多
Heavy metals have seriously contaminated soil and water, and done harm to public health. Academician WANG Naiyan proposed that ion-implantation technique should be exploited for environmental bioremediation by mutatin...Heavy metals have seriously contaminated soil and water, and done harm to public health. Academician WANG Naiyan proposed that ion-implantation technique should be exploited for environmental bioremediation by mutating and breeding plants or microbes. By implanting N^＋ into Taikonglian No.l, we have selected and bred two lotus cultivars, Jingguang No.1 and Jingguang No.2. The present study aims at analyzing the feasibility that irradiation can be used for remediation of soil and water from heavy metals. Compared with parent Taikonglian No.l, the uptaking and accumulating ability of heavy metals in two mutated cultivars was obviously improved. So ion implantation technique can indeed be used in bioremediation of heavy metals in soil and water, but it is hard to select and breed a cultivar which can remedy the soil and water from all the heavy metals.展开更多
Screw metal implants (3S, Israel) with rough or smooth polished surface were introduced in a tibial proximal condyle of not purebred rabbits. The condition of surrounding tissues in 2 and 6 months after implantation w...Screw metal implants (3S, Israel) with rough or smooth polished surface were introduced in a tibial proximal condyle of not purebred rabbits. The condition of surrounding tissues in 2 and 6 months after implantation was compared by light microscopy and X-ray methods. Within 6 months after operation the considerable distinctions of radiological and morphological data were revealed not. 2 months later after introduction of implants with a rough surface the effort enclosed for its twisting is, much more, than for removal of the polished product. However, stability of fixing of implants was practically made even at 6 months. On remote rough implants there is a set of tissue scraps whereas on products with a smooth surface the tissue remains were much less. Surrounding tissues strongly join a rough surface, grow into cavities, and during removal of such products there is a considerable trauma of tissues round an implantation place. Smooth implants have the smaller area of contact with organism tissues, they are fixed due to bicortical implantation, during removal easily get out and don’t break off surrounding tissues. The signs of inflammation and formation of merged multinuclear macrophages were not found at all cases, which give evidence to the inertness of material of the mentioned articles for living organism. In some observations however and by implantation of the rough article and by introduction of polished implants, metal particles were found, but after use of the foreign body with grit-blasted treatment of surface metal was found more frequently, and its fragments had larger volume.展开更多
Metal-ceramic restorations are widely used in dentistry with a high degree of general success. However, fracture of these restorations does occur and usually frustrates both the dentist and the patient. Objective: Thi...Metal-ceramic restorations are widely used in dentistry with a high degree of general success. However, fracture of these restorations does occur and usually frustrates both the dentist and the patient. Objective: This literature review discusses the factors that may lead to the fracture of these restorations whether they are tooth-supported or implant-supported with the aim of making dentists and technicians aware of these factors to avoid them. Factors reviewed include: technical factors, dentist-related factors, inherent material properties, direction, magnitude and frequency of applied loads, environmental factors, screw-retained implant-supported restorations, and posterior cantilevered prostheses. Material and Methods: A netbased search in “Pubmed” was performed and combined with a manual search. The search was limited to articles written in English. Conclusions: the published literature revealed that the factors predisposing to fracture of metal-ceramic restorations may be related to the technician, dentist, patient, environment, design of the restoration, or to inherent structure of ceramics and others. However, if the dentist and technician understand these factors and respect the physical characteristics of the materials, most of those are avoidable.展开更多
AISI 304 stainless steel was ion implanted with Co, and the tribological property on the surface of the stainless steelwas investigated. The Co ion implantation was carried out using a metal vapor vacuum arc (Mevva) b...AISI 304 stainless steel was ion implanted with Co, and the tribological property on the surface of the stainless steelwas investigated. The Co ion implantation was carried out using a metal vapor vacuum arc (Mevva) broad-beam ionsource with an extraction voltage of 40 kV, implantation doses of 3×10^(17)/cm^2 and 5×10^(17)/cm^2, and ion currentdensities of 13, 22 and 32μA/cm^2. The results showed that the near-surface hardness of Co-implanted stainless steelsample was increased by 50% or more, and it increased with increasing ion current density at first and then declined.The friction coefficient decreased from 0.74 to 0.20 after Co implantation. The wear rate after Co implantationreduced by 25% or more as compared to the unimplanted sample. The wear rate initially decreased with increasingion current density and then an increase was observed. Within the range of experimental parameters, there existsa critical ion current density for the Co-implanted stainless steel, at which the wear rate decreased with increasingretained dose, going through a minimum and then increased. The critical ion current density in this paper is about22μA/cm^2.展开更多
背景:近年来,金属有机框架由于其特有性质在生物医学领域应用广泛,可以将金属有机框架应用于种植体表面改性,以改善其生物学性能,提高手术成功率。目的:介绍种植体表面改性领域常用的金属有机框架以及种植体表面金属有机框架改性的制备...背景:近年来,金属有机框架由于其特有性质在生物医学领域应用广泛,可以将金属有机框架应用于种植体表面改性,以改善其生物学性能,提高手术成功率。目的:介绍种植体表面改性领域常用的金属有机框架以及种植体表面金属有机框架改性的制备和作用机制。方法:采用计算机检索中国知网、PubMed和Web of Science数据库中有关金属有机框架应用于种植体表面改性的研究资料,选取发表于2010-2023年的相关文献,最终纳入64篇文献进行综述分析。结果与结论:①金属有机框架具有孔隙率高、比表面积大及空间结构多样等性质,作为一种生物活性材料,金属有机框架在组织工程和再生医学中逐渐引起重视。②种植体改性领域常用的金属有机框架类型主要有3种:类沸石骨架材料最常作为载体应用,负载各种药物和生物分子,MIL系列材料适用于药物载体和纳米酶,Bio-金属有机框架因结构多样而应用广泛,突出特点是优异的生物安全性。③金属有机框架改性的种植体材料制备方法大致分为两类,第一类是将已合成的金属有机框架结合到预处理植入材料上,第二类是在预处理的材料表面原位合成金属有机框架。④种植体表面的金属有机框架通过降解释放自身组分、负载药物、催化活性反应及与其他材料联合等多种机制,赋予种植体抗菌抗炎促进骨整合的特性,但金属有机框架涂层制备方法还需要进一步完善,同时应深入探究材料后续代谢和分布问题,积极推动其在临床上的应用。展开更多
Macrophages play a central role in immunological responses to metallic species associated with the localized corrosion of metallic implants,and mediating in peri-implant inflammations.Herein,the pathways of localized ...Macrophages play a central role in immunological responses to metallic species associated with the localized corrosion of metallic implants,and mediating in peri-implant inflammations.Herein,the pathways of localized corrosion-macrophage interactions were systematically investigated on 316L stainless steel(SS)implant metals.Electrochemical monitoring under macrophage-mediated inflammatory conditions showed a decreased pitting corrosion resistance of 316L SSs in the presence of RAW264.7 cells as the cells would disrupt biomolecule adsorbed layer on the metal surface.The pitting potentials were furtherly decreased when the RAW264.7 cells were induced to the M1 pro-inflammatory phenotype by the addition of lipopolysaccharide(LPS),and pitting corrosion preferentially initiated at the peripheries of macrophages.The overproduction of aggressive ROS under inflammatory conditions would accelerate the localized corrosion of 316L SS around macrophages.Under pitting corrosion condition,the viability and pro-inflammatory polarization of RAW264.7 cells were region-dependent,lower viability and more remarkable morphology transformation of macrophages in the pitting corrosion region than the pitting-free region.The pitting corrosion of 316L SS induced high expression of CD86,TNF-α,IL-6 and high level of intracellular ROS in macrophages.Uneven release of metallic species(Fe^(2+),Cr^(3+),Ni^(2+),etc)and uneven distribution of surface overpotential stimulated macrophage inflammatory responses near the corrosion pits.A synergetic effect of localized corrosion and macrophages was revealed,which could furtherly promote localized corrosion of 316L SS and macrophage inflammatory reactions.Our results provided direct evidence of corrosion-macrophage interaction in metallic implants and disclosed the pathways of this mutual stimulation effect.展开更多
As the world’s populations increase and age, there is a parallel increase in the number of medical procedures addressed to bone related injuries. It is estimated that approximately 1 million of orthopaedic implant su...As the world’s populations increase and age, there is a parallel increase in the number of medical procedures addressed to bone related injuries. It is estimated that approximately 1 million of orthopaedic implant surgeries in association with total joint replacements are needed every year. This number is expected to double between 1999 and 2025 as a result of increasing numbers of musculoskeletal injuries (i.e., due to routine activities such as work, sport, etc.) and musculoskeletal diseases (i.e., such as osteoporosis, arthritis and bursitis due to increase age). Consequently, the increase demand for better quality of life has necessarily led people to opt for high quality orthopaedic devices for early recovery and speedy resumption of their routine activities. Unfortunately in the present time, it has been found that the current used orthopaedic implants have the tendencies to fail after long period of usage, due to the corrosion issue of implant in the human body. Therefore, this paper provides a simple overview about the corrosion issue of stainless steel (SS) 316L as implants in human body. Electrophoretic deposition (EPD) of hydroxypaptite (HA) bioceramic was proposed as the approach to minimize the corrosion phenomena. Additionally, the corrosion testing of HA coated SS 316L in comparison to pristine SS 316L was also performed and discussed.展开更多
The magnetron sputtered La0.7Sr0.3MnO3 films were implanted with different doses (5 ′ 1015 ions×cm?2 and 5 ′ 1016 ions×cm-2) of Al ions at different negative pulsed voltages (30 kV and 50 kV) by plasma bas...The magnetron sputtered La0.7Sr0.3MnO3 films were implanted with different doses (5 ′ 1015 ions×cm?2 and 5 ′ 1016 ions×cm-2) of Al ions at different negative pulsed voltages (30 kV and 50 kV) by plasma based ion implantation and then annealed at 973 K for 1 h in air. The microstructure, surface morphologies, surface roughness, metal-insulator transition and room temperature emittance properties of the post-implantation annealed films were investigated and compared with those of the La0.7Sr0.3MnO3 film annealed at 973 K for 1 h in air. The results indicate that the post- implantation annealed films show single perovskite phase and obvious (100) preferred orientation growth. The Mn-O bond length, surface roughness and metal-insulator transition temperature (TMI) of the films can be effectively adjusted by changing implantation voltage or implantation dose of Al ions. However, the change of implantation parameters just has a small effect on room temperature emittance of the films. Compared with the annealed film, the post-implantation annealed films have shorter Mn-O bond length and lower room temperature emittance. The TMI of the films implanted at low voltage is lower than that of the annealed film, which mainly results from the degradation of oxidization during annealing process and the part displacement of Mn3+-O2+- Mn4+ double exchange channels by Al3+-O2?-Mn4+. The post-implanted annealed film implanted at 50 kV/5 ′ 1016 ions×cm-2 has a higher TMI than the annealed film, which is 247 K. The increase of TMI of the film implanted with high dose of Al ions at high voltage can be attributed to the improvement of microstructure.展开更多
文摘Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials,but they can easily cause stress shielding due to the significant difference in elastic modulus between the implant and human bones.The elastic modulus of porous metals is lower than that of dense metals.Therefore,it is possible to adjust the pore parameters to make the elastic modulus of porous metals match or be comparable with that of the bone tissue.At the same time,the open porous metals with pores connected to each other could provide the structural condition for bone ingrowth,which is helpful in strengthening the biological combination of bone tissue with the implants.Therefore,the preparation technologies of porous metal implants and related research have been drawing more and more attention due to the excellent features of porous metals.Selective laser melting(SLM)and electron beam melting technology(EBM)are important research fields of additive manufacturing.They have the advantages of directly forming arbitrarily complex shaped metal parts which are suitable for the preparation of porous metal implants with complex shape and fine structure.As new manufacturing technologies,the applications of SLM and EBM for porous metal implants have just begun.This paper aims to understand the technology status of SLM and EBM,the research progress of porous metal implants preparation by using SLM and EBM,and the biological compatibility of the materials,individual design and manufacturing requirements.The existing problems and future research directions for porous metal implants prepared by SLM and EBM methods are discussed in the last paragraph.
基金supported by National Natural Science Foundation of China (No.11075019)Beijing Ion-Irradiating-Breeding Research Platform Project of China
文摘Heavy metals have seriously contaminated soil and water, and done harm to public health. Academician WANG Naiyan proposed that ion-implantation technique should be exploited for environmental bioremediation by mutating and breeding plants or microbes. By implanting N^＋ into Taikonglian No.l, we have selected and bred two lotus cultivars, Jingguang No.1 and Jingguang No.2. The present study aims at analyzing the feasibility that irradiation can be used for remediation of soil and water from heavy metals. Compared with parent Taikonglian No.l, the uptaking and accumulating ability of heavy metals in two mutated cultivars was obviously improved. So ion implantation technique can indeed be used in bioremediation of heavy metals in soil and water, but it is hard to select and breed a cultivar which can remedy the soil and water from all the heavy metals.
文摘Screw metal implants (3S, Israel) with rough or smooth polished surface were introduced in a tibial proximal condyle of not purebred rabbits. The condition of surrounding tissues in 2 and 6 months after implantation was compared by light microscopy and X-ray methods. Within 6 months after operation the considerable distinctions of radiological and morphological data were revealed not. 2 months later after introduction of implants with a rough surface the effort enclosed for its twisting is, much more, than for removal of the polished product. However, stability of fixing of implants was practically made even at 6 months. On remote rough implants there is a set of tissue scraps whereas on products with a smooth surface the tissue remains were much less. Surrounding tissues strongly join a rough surface, grow into cavities, and during removal of such products there is a considerable trauma of tissues round an implantation place. Smooth implants have the smaller area of contact with organism tissues, they are fixed due to bicortical implantation, during removal easily get out and don’t break off surrounding tissues. The signs of inflammation and formation of merged multinuclear macrophages were not found at all cases, which give evidence to the inertness of material of the mentioned articles for living organism. In some observations however and by implantation of the rough article and by introduction of polished implants, metal particles were found, but after use of the foreign body with grit-blasted treatment of surface metal was found more frequently, and its fragments had larger volume.
文摘Metal-ceramic restorations are widely used in dentistry with a high degree of general success. However, fracture of these restorations does occur and usually frustrates both the dentist and the patient. Objective: This literature review discusses the factors that may lead to the fracture of these restorations whether they are tooth-supported or implant-supported with the aim of making dentists and technicians aware of these factors to avoid them. Factors reviewed include: technical factors, dentist-related factors, inherent material properties, direction, magnitude and frequency of applied loads, environmental factors, screw-retained implant-supported restorations, and posterior cantilevered prostheses. Material and Methods: A netbased search in “Pubmed” was performed and combined with a manual search. The search was limited to articles written in English. Conclusions: the published literature revealed that the factors predisposing to fracture of metal-ceramic restorations may be related to the technician, dentist, patient, environment, design of the restoration, or to inherent structure of ceramics and others. However, if the dentist and technician understand these factors and respect the physical characteristics of the materials, most of those are avoidable.
文摘AISI 304 stainless steel was ion implanted with Co, and the tribological property on the surface of the stainless steelwas investigated. The Co ion implantation was carried out using a metal vapor vacuum arc (Mevva) broad-beam ionsource with an extraction voltage of 40 kV, implantation doses of 3×10^(17)/cm^2 and 5×10^(17)/cm^2, and ion currentdensities of 13, 22 and 32μA/cm^2. The results showed that the near-surface hardness of Co-implanted stainless steelsample was increased by 50% or more, and it increased with increasing ion current density at first and then declined.The friction coefficient decreased from 0.74 to 0.20 after Co implantation. The wear rate after Co implantationreduced by 25% or more as compared to the unimplanted sample. The wear rate initially decreased with increasingion current density and then an increase was observed. Within the range of experimental parameters, there existsa critical ion current density for the Co-implanted stainless steel, at which the wear rate decreased with increasingretained dose, going through a minimum and then increased. The critical ion current density in this paper is about22μA/cm^2.
文摘背景:近年来,金属有机框架由于其特有性质在生物医学领域应用广泛,可以将金属有机框架应用于种植体表面改性,以改善其生物学性能,提高手术成功率。目的:介绍种植体表面改性领域常用的金属有机框架以及种植体表面金属有机框架改性的制备和作用机制。方法:采用计算机检索中国知网、PubMed和Web of Science数据库中有关金属有机框架应用于种植体表面改性的研究资料,选取发表于2010-2023年的相关文献,最终纳入64篇文献进行综述分析。结果与结论:①金属有机框架具有孔隙率高、比表面积大及空间结构多样等性质,作为一种生物活性材料,金属有机框架在组织工程和再生医学中逐渐引起重视。②种植体改性领域常用的金属有机框架类型主要有3种:类沸石骨架材料最常作为载体应用,负载各种药物和生物分子,MIL系列材料适用于药物载体和纳米酶,Bio-金属有机框架因结构多样而应用广泛,突出特点是优异的生物安全性。③金属有机框架改性的种植体材料制备方法大致分为两类,第一类是将已合成的金属有机框架结合到预处理植入材料上,第二类是在预处理的材料表面原位合成金属有机框架。④种植体表面的金属有机框架通过降解释放自身组分、负载药物、催化活性反应及与其他材料联合等多种机制,赋予种植体抗菌抗炎促进骨整合的特性,但金属有机框架涂层制备方法还需要进一步完善,同时应深入探究材料后续代谢和分布问题,积极推动其在临床上的应用。
基金financially supported by National Natural Science Foundation of China(52201295,51825302,&52021004)State Key Project of Research and Development(2022YFB3804400)+1 种基金Natural Science Foundation of Chongqing(cstc2021jcyj-cxttX0002)China Postdoctoral Science Foundation(2021M693707).
文摘Macrophages play a central role in immunological responses to metallic species associated with the localized corrosion of metallic implants,and mediating in peri-implant inflammations.Herein,the pathways of localized corrosion-macrophage interactions were systematically investigated on 316L stainless steel(SS)implant metals.Electrochemical monitoring under macrophage-mediated inflammatory conditions showed a decreased pitting corrosion resistance of 316L SSs in the presence of RAW264.7 cells as the cells would disrupt biomolecule adsorbed layer on the metal surface.The pitting potentials were furtherly decreased when the RAW264.7 cells were induced to the M1 pro-inflammatory phenotype by the addition of lipopolysaccharide(LPS),and pitting corrosion preferentially initiated at the peripheries of macrophages.The overproduction of aggressive ROS under inflammatory conditions would accelerate the localized corrosion of 316L SS around macrophages.Under pitting corrosion condition,the viability and pro-inflammatory polarization of RAW264.7 cells were region-dependent,lower viability and more remarkable morphology transformation of macrophages in the pitting corrosion region than the pitting-free region.The pitting corrosion of 316L SS induced high expression of CD86,TNF-α,IL-6 and high level of intracellular ROS in macrophages.Uneven release of metallic species(Fe^(2+),Cr^(3+),Ni^(2+),etc)and uneven distribution of surface overpotential stimulated macrophage inflammatory responses near the corrosion pits.A synergetic effect of localized corrosion and macrophages was revealed,which could furtherly promote localized corrosion of 316L SS and macrophage inflammatory reactions.Our results provided direct evidence of corrosion-macrophage interaction in metallic implants and disclosed the pathways of this mutual stimulation effect.
文摘As the world’s populations increase and age, there is a parallel increase in the number of medical procedures addressed to bone related injuries. It is estimated that approximately 1 million of orthopaedic implant surgeries in association with total joint replacements are needed every year. This number is expected to double between 1999 and 2025 as a result of increasing numbers of musculoskeletal injuries (i.e., due to routine activities such as work, sport, etc.) and musculoskeletal diseases (i.e., such as osteoporosis, arthritis and bursitis due to increase age). Consequently, the increase demand for better quality of life has necessarily led people to opt for high quality orthopaedic devices for early recovery and speedy resumption of their routine activities. Unfortunately in the present time, it has been found that the current used orthopaedic implants have the tendencies to fail after long period of usage, due to the corrosion issue of implant in the human body. Therefore, this paper provides a simple overview about the corrosion issue of stainless steel (SS) 316L as implants in human body. Electrophoretic deposition (EPD) of hydroxypaptite (HA) bioceramic was proposed as the approach to minimize the corrosion phenomena. Additionally, the corrosion testing of HA coated SS 316L in comparison to pristine SS 316L was also performed and discussed.
文摘The magnetron sputtered La0.7Sr0.3MnO3 films were implanted with different doses (5 ′ 1015 ions×cm?2 and 5 ′ 1016 ions×cm-2) of Al ions at different negative pulsed voltages (30 kV and 50 kV) by plasma based ion implantation and then annealed at 973 K for 1 h in air. The microstructure, surface morphologies, surface roughness, metal-insulator transition and room temperature emittance properties of the post-implantation annealed films were investigated and compared with those of the La0.7Sr0.3MnO3 film annealed at 973 K for 1 h in air. The results indicate that the post- implantation annealed films show single perovskite phase and obvious (100) preferred orientation growth. The Mn-O bond length, surface roughness and metal-insulator transition temperature (TMI) of the films can be effectively adjusted by changing implantation voltage or implantation dose of Al ions. However, the change of implantation parameters just has a small effect on room temperature emittance of the films. Compared with the annealed film, the post-implantation annealed films have shorter Mn-O bond length and lower room temperature emittance. The TMI of the films implanted at low voltage is lower than that of the annealed film, which mainly results from the degradation of oxidization during annealing process and the part displacement of Mn3+-O2+- Mn4+ double exchange channels by Al3+-O2?-Mn4+. The post-implanted annealed film implanted at 50 kV/5 ′ 1016 ions×cm-2 has a higher TMI than the annealed film, which is 247 K. The increase of TMI of the film implanted with high dose of Al ions at high voltage can be attributed to the improvement of microstructure.
