Combined imbibition system with black nanosheet and low-salinity water for improving oil recovery in tight sandstone reservoirs

Nanomaterials and low-salinity water(LSW)are two popular enhanced oil recovery(EOR)methods that have been widely studied in recent years.The former is used for in-depth conformance improvement and the latter for microscopic oil displacement(by altering the potential and contact angle).However,there are few literature on combining them to achieve synergistic effects,especially for tight sandstone res-ervoirs.Based on the reservoir conditions of the Jimusar Oilfield,this study investigated the oil recovery mechanism of the combined imbibition system,which was composed of black nanosheet(BN)and LSW.Its performances including decreasing interfacial tension,emulsification,and wettability alterations were evaluated.The imbibition differences between the single system of BN and LSW and the combined BN-LsW imbibition system were then compared.Results showed that the combined imbibition system had a better emulsification effect on the crude oil and could also alter the wettability of the core surface.Moreover,the combined system could increase both the imbibition rate and the ultimate oil recovery.The nuclear magnetic T2 spectrum also indicated that the addition of black nanosheets could divert more fluid into small pores and thus improve the microscopic sweep efficiency.

Foaming supramolecular surfactants for gas mobility control in naturally fractured carbonate reservoirs at high temperature,salinity,and hardness

Oil production and mainte nance are essential issues in naturally fractured reservoirs because they are the largest and most productive on earth.However,they present early water and gas channeling but could be remediated by using foaming agents to control these phenomena through blocking channeling areas.In Mexico these reservoirs have pressure up to 5,500 psi,high temperature up to 200℃,salinity up to400,000 ppm,and hardness up to 250,000 ppm;due to these thermodynamic conditions,there has been no available technology to form stable enough foams.In this work,a foaming supramolecular surfactant with the capability to chelate Ca^(2+)ions is examined.As a result,surfactant monomers are bridged by captured Ca^(2+)cations leading to the formation of high-molecular-weight oligomers,which significantly increment the viscosity of the solution improving the foam stability,and since at this manner the Ca2+cations are no longer available to precipitate as components of solid salts,the foaming supramolecular surfactant also performs as antiscalant.These observations are explained through quantum theoretical modeling.The foam is stable,effectively blocking the gas channels,whereas in presence of oil the foam is broken leading the oil to pass into the wellbore.The characteristic rheological properties of the foam allow its injection into the formation at a range of flow rates,foam qualities,and shear stress to achieve the flooding and the blocking of a variety of fractured carbonate formations,and the change of the wettability of the matrix,which is a desirable behavior in a huff and puff process,as reported in a previous publication about a successful pilot test of this foam.

Comparison of numerical codes for coupled thermo-hydro-mechanical simulations of fractured media

Geo-energy and geo-engineering applications,such as improved oil recovery(IOR),geologic carbon storage,and enhanced geothermal systems(EGSs),involve coupled thermo-hydro-mechanical(THM)processes that result from fluid injection and production.In some cases,reservoirs are highly fractured and the geomechanical response is controlled by fractures.Therefore,fractures should explicitly be included into numerical models to realistically simulate the THM responses of the subsurface.In this study,we perform coupled THM numerical simulations of water injection into naturally fractured reservoirs(NFRs)using CODE_BRIGHT and TOUGH-UDEC codes.CODE_BRIGHT is a finite element method(FEM)code that performs fully coupled THM analysis in geological media and TOUGH-UDEC sequentially solves coupled THM processes by combining a finite volume method(FVM)code that solves nonisothermal multiphase flow(TOUGH2)with a distinct element method(DEM)code that solves the mechanical problem(UDEC).First,we validate the two codes against a semi-analytical solution for water injection into a single deformable fracture considering variable permeability based on the cubic law.Then,we compare simulation results of the two codes in an idealized conceptual model that includes one horizontal fracture and in a more realistic model with multiple fractures.Each code models fractures differently.UDEC calculates fracture deformation from the fracture normal and shear stiffnesses,while CODE_BRIGHT treats fractures as equivalent porous media and uses the equivalent Young’s modulus and Poisson’s ratio of the fracture.Finally,we obtain comparable results of pressure,temperature,stress and displacement distributions and evolutions for the single horizontal fracture model.Despite some similarities,the two codes provide increasingly different results as model complexity increases.These differences highlight the challenging task of accurately modeling coupled THM processes in fractured media given their high nonlinearity.

Developing a phenomenological model to simulate single and mixed scale formation during flow in porous media:Coupling a salt precipitation model with an ion transport equation under dynamic conditions

Water flooding and pressure maintenance are recommended to improve oil recovery practices after low recovery of petroleum reservoirs occurs during primary production.Salt crystal formation is a frequent occurrence when using these techniques.Several experimental,numerical,and theoretical studies have been done on the mechanisms underlying scaling and permeability reduction in porous media;however,there has not been a satisfactory model developed.This study developed a phenomenological model to predict formation damage caused by salt deposition.Compared with existing models,which provide a scaling tendency,the proposed model predicts the profile of scale deposition.The salt precipitation model simulates reactive fluid flow through porous media.A thermodynamic,kinetic,and flow hydrodynamic model was developed and coupled with the ion transport equation to describe the movement of ions.Further,a set of carefully designed dynamic experiments were conducted and the data were compared with the model predictions.Model forecasts and experimental data were observed to have an average absolute error(AAE)ranging from 0.68%to 5.94%,which indicates the model's suitability.