Stimulated Brillouin Scattering Enhancement Factor Improvement in a 11.6-GHz-Linewidth 1.5-kW Yb-Doped Fiber Amplifier

The stimulated Brillouin scattering （SBS） threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier （YDFA） with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 （26 W SBS threshold with single frequency seed）. The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.

Impact factors and improvement measures of enviroment quality in cleaning operating room

Objective To analyze the factors that impact the environment quality of cleaning operating room and to discuss improvement measurement. Methods Environment bacteria testing results and prevalence of surgical incision infection in cleaning operating room were retro-

Bayesian synthetic evaluation of multistage reliability growth with instant and delayed fix modes

In the multistage reliability growth tests with instant and delayed fix modes, the failure data can be assumed to follow Weibull processes with different parameters at different stages. For the Weibull process within a stage, by the proper selection of prior distribution form and the parameters, a concise posterior distribution form is obtained, thus simplifying the Bayesian analysis. In the multistage tests, the improvement factor is used to convert the posterior of one stage to the prior of the subsequent stage. The conversion criterion is carefully analyzed to determine the distribution parameters of the subsequent stage＇s variable reasonably. Based on the mentioned results, a new synthetic Bayesian evaluation program and algorithm framework is put forward to evaluate the multistage reliability growth tests with instant and delayed fix modes. The example shows the effectiveness and flexibility of this method.

Optimization of regenerator based on semiconductor optical amplifier for degraded differential phase shift keying signal

Real time phase regeneration is necessary for degraded phase modulation format optical communication systems. A regenerator based on the discrimitive gain effect of a semiconductor optical amplifier was proposed in recent years. In this paper, for this type of regenerator, its optimal working condition is found by solving the dynamic equations which describe the variance of the optical field and carrier density in the semiconductor optical amplifier by the finite difference method. The results show that the optimal improvement of signal Q factor can reach more than 2.2 dB.

Improvements on Certainty Factor Model and Its Application to Conflict Resolution in CDPS

In this paper some improvements on certainty factor model are discussed aiming at:1)including, in a rule“E→H”,not only the CF of H when E exists but also CF of(?)when E does not exist(partly or completely).For this purpose another factor(?)is added into the original model;2) improving the model so that it can tackle problems with unknown evidence.In this aspect two concepts are introduced:(relative)maximum existence risk and(relative)maximum non-existence risk.An impor- tant result is that even if some necessary evidence is unknown one can still know the tendency whether the conclusion is true.Based on the improvements a conflict resolution model for problem-level conflict is also presented

Periodic Preventive Maintenance Policy with Infinite Time and Limit of Reliability Based on Health Index

The aging of machine can be slowed and the life of machine can be increased by implementing periodic predictive maintenance. In this article,an improvement factor considering maintenance cost,age of machine and learning effect in the process of maintaining is constructed to describe the effect of periodic preventive maintenance. The model of improvement factor can be fitted through health index. Based on improvement factor with infinite time,cost function including preventive maintenance cost,minimal repair cost and replacement cost is explored. The unit cost and the optimized maintenance time interval based on limit of reliability are deduced. The process of optimization and an example are given.

Nanoelectromechanical resonant narrow-band amplifiers

This study demonstrates amplification of electrical signals using a very simple nanomechanical device.It is shown that vibration amplitude amplification using a combination of mechanical resonance and thermal-piezoresistive energy pumping,which was previously demonstrated to drive self-sustained mechanical oscillation,can turn the relatively weak piezoresistivity of silicon into a viable electronic amplification mechanism with power gains of 420 dB.Various functionalities ranging from frequency selection and timing to sensing and actuation have been successfully demonstrated for microscale and nanoscale electromechanical systems.Although such capabilities complement solid-state electronics,enabling state-of-the-art compact and high-performance electronics,the amplification of electronic signals is an area where micro-/nanomechanics has not experienced much progress.In contrast to semiconductor devices,the performance of the proposed nanoelectromechanical amplifier improves significantly as the dimensions are reduced to the nanoscale presenting a potential pathway toward deep-nanoscale electronics.The nanoelectromechanical amplifier can also address the need for ultranarrow-band filtering along with the amplification of lowpower signals in wireless communications and certain sensing applications,which is another need that is not efficiently addressable using semiconductor technology.